COMPUTHERM, manufactured by Quantrax Ltd., specializes in digital and Wi-Fi thermostats, zone controllers, and energy-efficient circulation pumps for HVAC optimization.
Kọmputa is a specialized brand dedicated to modern heating and cooling control technology. Manufactured by Quantrax Ltd., COMPUTHERM products are engineered to deliver precise temperature regulation, ensuring both comfort and significant energy savings.
Isi ihe dị mkpa gụnyere:
From simple mechanical thermostats to complex multi-zone smart home integrations, COMPUTHERM provides versatile compatibility with standard boilers and HVAC equipment.
Akwụkwọ ntuziaka kacha ọhụrụ si manuals+ kwadoro maka ika a.
Ajụjụ a na-ajụkarị gbasara akwụkwọ ntuziaka, ndebanye aha na nkwado maka ika a.
To connect a COMPUTHERM Wi-Fi thermostat (e.g., E Series), downoad the mobile app, ensure your phone is on a 2.4 GHz Wi-Fi network with GPS enabled, and put the thermostat into pairing mode (usually by holding a button until the Wi-Fi icon flashes fast). Then follow the "Configure" steps in the app.
Yes, by using zone controllers like the COMPUTHERM Q4Z or Q10Z, you can divide your heating system into several zones. This allows individual thermostats to control specific areas independently, opening zone valves and starting the boiler only when needed.
First, check the batteries (if applicable) and the power supply to the receiver unit. Ensure the thermostat is paired with the receiver (for wireless models). Also, verify the wiring connections at the boiler (NO and COM terminals) and ensure the set temperature is higher than the current room temperature.
The reset procedure varies by model. For many digital models, there is a RESET button (often requiring a pin to press) or a specific button combination found in the "Settings" menu under "FAC" or similar codes. Consult your specific user manual for the exact steps.