Altronix Maximal DV Series Dual Power Supply Access Guide Installation Controllers Power

Usoro DV kacha
Ndị na-ahụ maka inye ike na-enweta ike abụọ (PTC)
Ntuziaka nwụnye

Elsdị gụnyere:

Kachasị 11DV

Nkwanye ike 1: 12VDC @ 3.5A ma ọ bụ 24VDC @ 2.7A.
Nkwanye ike 2: 12VDC @ 3.5A ma ọ bụ 24VDC @ 2.7A.

Mpụta iri na isii (16) PTC echedoro.

Kachasị 75DV

Nkwanye ike 1: 12VDC @ 9.5A.
Nkwanye ike 2: 24VDC @ 9.7A.
Mpụta iri na isii (16) PTC echedoro.

Kachasị 33DV

Nkwanye ike 1: 12VDC ma ọ bụ 24VDC @ 5.7A.
Nkwanye ike 2: 12VDC ma ọ bụ 24VDC @ 5.76A.
Mpụta iri na isii (16) PTC echedoro.

Kachasị 77DV

Nkwanye ike 1: 24VDC @ 9.7A.
Nkwanye ike 2: 24VDC @ 9.7A.
Mpụta iri na isii (16) PTC echedoro.

Kachasị 55DV

Nkwanye ike 1: 12VDC @ 9.5A.
Nkwanye ike 2: 12VDC @ 9.5A.
Mpụta iri na isii (16) PTC echedoro.

Mkpu 090711
Ụlọ ọrụ wụnye: _______________ Onye nnọchi anya ọrụ: _______________________________
Adreesị: ___________________________________________ Ekwentị #: __________________

ọdịnaya zoo

1 Usoro MaximalDV gafereview:

2 Chart nhazi usoro MaximalDV:

3 Atụmatụ usoro MaximalDV:

4 Ntuziaka nwụnye MaximalDV:

5 Nlekọta:

6 Nchọpụta Ọkụ Ọkụ Na-eweta Ike LED Diagnostics:

7 Nchọpụta Ọkụkụ nke Onye njikwa ike nweta:

8 Ngosipụta ngwụcha Board Supply Power:

9 Nweta njirimara njedebe onye njikwa ike:

10 Nkọwapụta batrị na bọọdụ na-eweta ike:

11 Mpụta Board Na-enye Ike Voltage Ntọala:

12 Nweta eserese ngwa ngwa njikwa ike (maka ACM8CB ọ bụla):

13 Achọrọ Wiring nwere oke ike NEC maka Maximal11DV:

14 Achọrọ Wiring nwere oke ike NEC maka Maximal33DV na Maximal55DV:

15 Achọrọ Wiring nwere oke ike NEC maka Maximal75DV:

16 Achọrọ Wiring nwere oke ike NEC maka Maximal77DV:

17 Eserese FACP/Nhọrọ inye nkwado ike:

18 Akụkụ Mkpuchi (H x W x D ihe ruru):

19 Akwụkwọ / akụrụngwa

19.1 Ntụaka

20 Ozi ndị metụtara

Usoro MaximalDV gafereview:

Altronix MaximalDV Access Power/Controllers na-ekesa ma gbanwee ike iji nweta sistemụ njikwa na ngwa. Ha na-atụgharị 220VAC (ọnụọgụ ọrụ 198VAC - 256VAC), ntinye 50/60Hz n'ime iri na isii (16) na-achịkwa 12VDC ma ọ bụ 24VDC PTC n'onwe ya. Enwere ike ịtụgharị nsonaazụ ike ndị a dị nfe-Safe/Fail-Secure ka ọ bụrụ kọntaktị “C” kpọrọ nkụ. A na-arụ ọrụ mmepụta ya site na sink onye na-anakọta oghe ma ọ bụ na-emeghekarị (NO) ntinye ọkụ ọkụ sitere na Sistemụ Njikwa Nweta, ahụigodo, bọtịnụ Push, REX PIR, wdg. nkeji ga-ebufe ike gaa n'ọtụtụ ngwaọrụ njikwa ngwaike gụnyere: Mag Locks , Eletriki Strikes, Magnetic Door Holders, wdg FACP Interface na-enyere aka Mberede Mberede, Oti mkpu, ma ọ bụ enwere ike iji kpalite ngwaọrụ inyeaka ndị ọzọ. A na-ahọrọ njirimara nkwụsị ọkụ ọkụ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke iri na isii (16).

Chart nhazi usoro MaximalDV:

Altronix Nọmba nlereanya	Mmepụta Voltage Nhọrọ		Mkpokọta mpụta Ugbu a (mpụta iri na isii)	Nke ugbu a kwa ACM8CB mmepụta	PTC echekwara Nsonaazụ (akpaghị aka-resettable)	220VAC 50/60 Hz Ntinye (ugbu a)	Ngosipụta Fuse Board na-enye ike	Ọkụ na-enye ike batrị fuse Ogo
	Tụkwasịnụ Ike 1	Tụkwasịnụ Ike 2
Maxima111DV	Ọnụahịa kasị elu nke AL400XB2V	Ọnụahịa kasị elu nke AL400XB2V	-	25A .	16	2.4A	5A / 250V	15A / 32V
	12VDC @ 3.5A	12VDC ©3.5A	7A
	12VDC @ 2.7A	24VDC @ 2.7A	5.4A
	24VDC © 3.5A	24VDC © 2.7A	6.2A
Kachasị 33DV	AL600XB220	AL600XB220	-	2A .	16	3A	5A / 250V	-
	12VDC 0 5.5A	12VDC @ 5.5A	11A
	12VDC @ 5.7A	24VDC @ 5.7A	11.4A
	24VDC @ 5.5A	24VDC @ 5.7A	11.2A
Maxima155DV	AL1012XB220	AU 012XB220	19	2.5A	16	3A	5A/250V	15A/32V
	12VDC 0 9.5A	12VDC @ 9.5A
Maxima175DV	AL1012XB220	Ọnụahịa kasị elu nke AL1024XB2V	19	2.5A	16	5A	5A/250V	15A/32V
	12VDC 0 9.5A	24VDC @ 9.5A
Maxima177DV	Ọnụahịa kasị elu nke AL1024XB2V	Ọnụahịa kasị elu nke AL1024XB2V	19.	2.5A	16	6A	5A/250V	15A/32V
	24VDC 0 9.7A	24VDC 0 9.7A

Atụmatụ usoro MaximalDV:

Iri na isii (16) na-ebute nsonaazụ a na-achịkwa n'onwe ya. Nhọrọ mmepụta:
a) Iri na isii (16) Mwepụta ike nzacha na nke eletrọnịkị na-achịkwa nke dara ada.
b) Iri na isii (16) Mwepụta ike nzacha na nke eletrọnịkị na-achịkwa nke dara ada.
c) Mpụta iri na isii (16) ụdị “C” relay (pụtara @ 5A/28VDC ma ọ bụ VAC).
d) Ngwakọta ọ bụla nke dị n'elu.
Iri na isii (16) Ntinye njikwa sistemụ na-akpalite ntinye. Nhọrọ ịkpalite ntinye:
a) Iri na isii (16) na-emeghekarị (MHỤKWU) ntinye mkpali akọrọ.
b) Ntinye iri na isii (16) ghe oghe.
c) Ngwakọta ọ bụla nke dị n'elu.

Iri na isii (16) nzacha na nzacha eletrọnịkị aux. mmepụta ike (a na-edepụta mmepụta @ 2.5A).
Igwe ọkụ na-acha uhie uhie na bọọdụ ACM8CB na-egosi na a na-ebute nsonaazụ nke onye ọ bụla (gbanye ọkụ).

Mwepu mkpu oku ọkụ (latching ma ọ bụ enweghị nkwụsị) bụ nke a na-ahọrọ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke iri na isii (16).
Nhọrọ ntinye ihe mgbanye mgbanyụ ọkụ:
a) Ndenye mkpalite akọrọ na-emepe nke ọma (MENWEE) ma ọ bụ mechiri emechi (NC).
b) Ntinye ngbanwe polarity sitere na sekit mgbama FACP.
Green LED na bọọdụ ACM8CB na-egosi nkwupu FACP kpalitere.

Mgbasa ozi FACP na-egosi na ntinye FACP na-akpalite (ụdị kọntaktị “C” nwere akara @ 1A/28VDC).
Nhọrọ ntinye ọkụ:
a) Igwe ọkụ arụnyere ụlọ ọrụ na-enye ike nkịtị maka bọọdụ ACM8CB na ngwaọrụ njikwa ohere niile ejikọrọ.
b) Enwere ike ijikọ ọnye njikwa ohere mpụga nhọrọ iji kewapụ bọọdụ ACM8CB na ngwaọrụ njikwa ohere (naanị ọdabara na Maximal11DV).

ACM8CB bọọdụ isi fuse ka akara @ 10A. A na-edepụta PTCs @ 2.5A.
Chaja arụnyere n'ime maka acid a na-emechi ma ọ bụ batrị ụdị batrị.
- Kachasị ụgwọ ugbu a bụ 0.7A maka AL400XB2V, AL600XB220, na AL1012XB220 ike ọkọnọ mbadamba.
- Kachasị ụgwọ ugbu a bụ 3.6A maka AL1024XB2V ike ọkọnọ osisi.

Gbanwee akpaaka ka batrị nọrọ na-echere mgbe AC dara.
Zero voltage dobe mgbe unit gafere na ndabere batrị (ọnọdụ ọdịda AC).
Mkpirisi sekit na nchekwa oke ọkụ yana nrụpụta akpaaka.
Ntinye aka Green AC na ihe ngosi ọkụ DC na-acha uhie uhie na bọọdụ ọkọnọ ike.

AC dara nleba anya (ụdị kọntaktị “C” nwere akara @ 1A/28VDC).
Batrị dara na nlekọta ọnụnọ batrị (ụdị kọntaktị “C” nwere akara @ 1A/28VDC).
Mkpọchi na-anabata ihe ruru batrị anọ (4) 12VDC/12AH. Akụkụ mkpuchi: 26 ″ x 19″ x 6.25″ (660.4mm x 482.6mm x 158.8mm).

Ntuziaka nwụnye MaximalDV:

Ụzọ wiwi ga-adị n'ụzọ kwekọrọ na National Electric Code/NFPA 70/ANSI, yana koodu mpaghara na ndị ọchịchị niile nwere ikike. Ezubere ngwaahịa maka naanị ime ụlọ.

Nchọpụta Ọkụ Ọkụ Na-enye Ike LED Diagnostics	(pg. 6)
Ịnweta ihe nleba anya nke ọkụ ọkụ LED	(pg. 6)
Ngosipụta njedebe Board Supply Board	(pg. 7)
Nweta njirimara njedebe onye njikwa ike	(pg. 7)
Nkọwapụta batrị na-akwado bọọdụ na-eweta ike	(pg. 8)
Mpụta Board Na-enye Ike Voltage Ntọala	(pg. 9)
Nweta eserese ngwa ngwa njikwa ike	(pg. 9)
Eserese FACP/Nhọrọ inye nkonye ike	(pg. 17-18)

Wụnye otu n'ime ebe achọrọ. Kaa akara na prerill oghere na mgbidi ka kwụ n'ahịrị n'ahịrị igodo atọ dị n'elu n'ogige ahụ. Wụnye ihe nkwụnye elu atọ na kposara na mgbidi na isi ihe nkedo na-apụta. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu, ọkwa, na nchekwa. Kaa akara ọnọdụ nke oghere atọ dị ala. Wepu ihe mkpuchi ahụ. Gwuo oghere ndị dị ala ma wụnye ngwa ngwa atọ. Tinye oghere igodo elu nke ogige ahụ n'elu skru atọ dị elu. Wụnye skru atọ dị ala ma jide n'aka na ị ga-eme ka skru niile sie ike (Mpaghara mkpuchi, pg. 20).

A na-ebute ụzọ ọkụ ọkụ na ala (chassis). Jikọọ isi ala na-abata na ala ala (nchekwa) enyere. Jikọọ ike AC akwụghị ụgwọ (220VAC, 50/60Hz) na njedebe akara [L, N] na bọọdụ ọkọnọ ike abụọ ahụ. Jiri 14 AWG ma ọ bụ karịa maka njikọ ike niile.
Debe wiwi nwere oke ike iche na wiwi na-enweghị ike (220VAC, ntinye 50/60Hz, waya batrị). Ekwesịrị ịnye oghere kacha nta 0.25 inch.
kpachara anya: Emetụla akụkụ ọla ndị ekpughere ekpughere aka. Mechie ike sekit alaka ụlọ ọrụ tupu ịwụnye ma ọ bụ na-arụ ọrụ. Enweghị akụkụ ndị ọrụ ga-arụ ọrụ n'ime. Tụtụ aka na nrụnye na ọrụ nye ndị ọrụ ruru eru.
Họrọ mmepụta DC chọrọ voltage site n'itinye SW1 n'ọnọdụ kwesịrị ekwesị na osisi ọkụ ọkụ (Maximal11DV na Maximal33DV) (Fig 1, pg. 9). Maximal55DV ike ọkọnọ bụ factory atọrọ na 12VDC.Maximal77DV ike ọkọnọ bụ factory atọrọ na 24VDC. Maximal75DV nwere otu bọọdụ ọkụ na-enye ọkụ nke edobere na 1VDC, yana otu (12) bọọdụ ọkọnọ ike nke edobere na 1VDC.

Tule mmepụta voltage nke unit tupu ijikọ ngwaọrụ ọ bụla iji hụ na arụ ọrụ kwesịrị ekwesị. Na-ezighi ezi ma ọ bụ elu voltage ga-emebi ngwaọrụ ndị a.
Nhọrọ mmepụta (Fig 2, pg. 9):
Ngalaba ahụ ga-enye ma ọ bụ iri na isii (16) mpụta ike gbanwere, iri na isii (16) ụdị akọrọ "C" pụta, ma ọ bụ ihe ọ bụla ngwakọta nke ma gbanwee ike na ụdị "C" pụta.
(a) Mbupute ọkụ agbanweela nke ọma:
Maka arụmọrụ ọdịda-Safe jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na njedebe akara
[NC]. Jikọọ ntinye adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].
(b) Mwepụta ọkụ agbanweela nke dara-nchekwa: Maka ịrụ ọrụ nchekwa nchekwa, jikọọ ntinye dị mma (+) nke ngwaọrụ njikwa ohere na njedebe akara [NO]. Jikọọ ntinye adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].

Nsonaazụ ike inyeaka (anaghị agbanwe):
Jikọọ ngwaọrụ njikwa ohere nke chọrọ ike mgbe niile na njedebe akara [C] nti (+) na [COM] adịghị mma (-).
Nhọrọ ntinye ntinye (Fig. 2, pg. 9):
(a) Na-emepekarị mkpalite ntinye [NO]:
Ntinye 1-8 na-arụ ọrụ site na ntinye sink na-emeghe ma ọ bụ nke mepere emepe. Jikọọ ntinye njikwa njikwa ohere, ahụigodo, bọtịnụ ntinye, REX PIRs, wdg na njedebe akara [IN] na [GND].
(b) Mepee ihe ntinye ihe mkpokọ mkpokọta:
Jikọọ ogwe njikwa ohere mepere onye na-anakọta ihe dị mma (+) na njedebe akara [IN] yana nke ọjọọ (-) na njedebe akara [GND].

Nhọrọ ihu mkpu ọkụ (Fil. 10-15, pg. 17-18):
Ntinye ntinye nke emechiri emechi [NC] ma ọ bụ nke na-emeghe [NO] site na ogwe njikwa ọkụ ma ọ bụ ndenye ngbanwe polarity sitere na sekit mgbama FACP ga-emetụta nsonaazụ ahọpụtara. Iji mee ka FACP kwupu maka mmepụta, tụgharịa mgba ọkụ kwekọrọ (s) [SW1-SW8] na bọọdụ ACM8CB ọ bụla Gbanyụọ. Iji gbanyụọ nkwụsị FACP maka mmepụta, tụgharịa mgba ọkụ kwekọrọ na bọọdụ ACM1CB ọ bụla ON.
(a) Ntinye [NO] na-emepe nke ọma:
Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 12, pg. 17. N'ihi na latching nko-elu na-ezo aka na Fig. 13, pg. 18.
(b) Ntinye [NC] na-emechikarị:
Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 14, pg. 18. N'ihi na latching nko-elu na-ezo aka na Fig. 15, pg. 18.
(c) FACP mgbama mgbanye mgbanye mgbanye sekit:
Jikọọ ihe dị mma (+) na nke na-adịghị mma (-) site na mmepụta sekit mgbaàmà FACP na njedebe akara [+ INP]. Jikọọ FACP EOL na njedebe akara [+ RET] (a na-ezo aka na polarity na ọnọdụ mkpu). Jumper dị n'akụkụ TRG LED ga-ebipụ (Fig 2b, pg. 8 na Fig. 8, pg. 14).
Mpempe akwụkwọ “C” FACP kpọrọ nkụ (Fig 2a, pg. 9):
FACP ụdị "C" nwere ike iji kpalite mkpesa ma ọ bụ ngwaọrụ mgbaàmà. Kọntaktị ndị a na-agbanye n'elu ntinye oti mkpu ọkụ na-akpalite na bọọdụ ACM8CB.

Njikọ batrị guzoro ọtọ (Fil. 3-5, pg. 10-12):
Maka ngwa njikwa nnweta batrị bụ nhọrọ. Ọ bụrụ na ejighị batrị, mfu nke AC ga-ebute mfu nke mmepụta voltage. Batrị ga-abụrịrị ụzọ acid ma ọ bụ gel ụdị. Jikọọ otu (1) 12VDC batrị na njedebe akara [+ BAT] maka ọrụ 12VDC (Figs 3, 5, pgs. 10, 12). Jiri batrị abụọ (2) 12VDC wired na usoro maka ọrụ 24VDC (Fig 3-5, pgs 10-12).
Ihe nrụpụta batrị na AC (Fil. 3-5, pg. 10-12):
Ọ chọrọ ijikọ ngwaọrụ mkpesa nsogbu nlekọta na mpụta akara ngosi [AC Fail, BAT FAIL] akara ngosi [NC, C, NO] na ngwaọrụ ngosi ngosi kwesịrị ekwesị. Jiri 22 AWG ruo 18 AWG maka AC ọdịda & obere/enweghị mkpesa batrị.
Ntinye nke tampmgba ọkụ (anaghị etinye ya) (Fig. 3a, 4a, 5a, pg. 10-12):
Ugwu UL Edepụtara tamper mgba ọkụ (Honeywell Model 112 ma ọ bụ dakọtara) n'elu nke ogige. Gbanye tamper mgbanwo bracket na nsọtụ nke ogige ahụ ihe dịka 2″ site n'akụkụ aka nri. Jikọọ tampgbanwee wiring gaa na ntinye Ogwe njikwa nnweta ma ọ bụ ngwaọrụ mkpesa UL Edepụtara kwesịrị ekwesị. Iji mee ka mgbaama mkpu rụọ ọrụ, mepee ọnụ ụzọ nke ogige ahụ.
Ntinye ọkụ ọkụ ọtụtụ (Fig 2, pg. 9):
Mgbe ị na-eji ike mpụga ọzọ, jumpers J1 na J2 dị na mbadamba ACM8CB kwekọrọ ga-ebipụ (Fig 2c, 2d, pg. 9, Fig. 10, pg. 17). Jikọọ ọkụ njikwa nnweta mpụga na ọdụ akara akara [ Control +] (naanị ọdabara na Maximal11DV). Mgbe ị na-eji DC ike ọkọnọ a ga-ahụ polarity. Mgbe ị na-eji AC ike ọkọnọ, ekwesighi ịhụ polarity. (Fig. 2d, pg. 9). Niile njikọ wiring ubi ga-mere n'ọrụ kwesịrị ekwesị nlele CM ma ọ bụ FPL jaketed waya ma ọ bụ dakọrọ nnọchi (Fig. 6a-9a, pgs. 13-16).

Nlekọta:

A ga-anwale nkeji opekata mpe otu ugboro n'afọ maka ịrụ ọrụ kwesịrị ekwesị dịka ndị a:

Nlekọta FACP:
Iji hụ na njikọ kwesịrị ekwesị na ịrụ ọrụ nke nkwụnye nkwụnye ọkụ ọkụ. Biko soro usoro kwesịrị ekwesị n'okpuru:

Ntinye na-emepe emepe:
Ịtụnye ntakịrị n'etiti ọnụ ụzọ akara [T] na [+ INP] ga-akpalite
Kwupu oti mkpu ọkụ. Wepu mkpụmkpụ ka ịtọgharịa.

Ntinye na-emechikarị:
Wepu waya na ọnụ nke akara [INP] ga-akpalite Mkpu ọkụ
Kwupu njikọ. Dochie waya na ọnụ nke akara [INP] iji tọgharịa.
Ntinye sekit mgbama FACP: Ọ dị mkpa ịkpalite Sistemụ Mkpu Ọkụ.
In all of the above scenarios the green TRG LED of the ACM8CBs will illuminate. All outputs selected for Fire Alarm Disconnect will activate releasing locking devices.
Mara: Nsonaazụ niile [OUT 1 – OUT 8] ga-abụrịrị n'ọnọdụ nkịtị (na-agwụ ike) tupu nnwale. Mgbe a na-ahazi unit ahụ maka Mepee Nkịtị (Fig 13, pg. 18) ma ọ bụ na-emechikarị (Fig 15, pg. 18) arụ ọrụ latching, ọ dị mkpa iji tọgharịa mgbanaka mkpu ọkụ ọkụ site n'ịkwalite mgbanaka nrụpụta emechiri emechi.

Mmepụta Voltage nwale:
N'okpuru ọnọdụ ibu nkịtị, mmepụta DC voltage kwesịrị ịlele nke ọma voltage larịị (Nkọwapụta nkọwa batrị na-akwado bọọdụ na-eweta ike, pg. 8).

Nnwale batrị:
N'okpuru ọnọdụ ibu nkịtị lelee na chajịrị batrị zuru oke, lelee voltaji akọwapụtaratage na ọdụ batrị yana na bọọdụ akara akara [+ BAT] iji hụ na enweghị nkwụsịtụ na wires njikọ batrị.

Mara: AL400XB2V, AL600XB220, na AL1012XB220 Power Supply Board kacha ụgwọ ugbu a bụ 0.7A. AL1024XB2V Power Supply Board kacha ụgwọ ugbu a bụ 3.6A. Ndụ batrị tụrụ anya bụ afọ 5; Otú ọ dị, a na-atụ aro ka ịgbanwe batrị n'ime afọ 4 ma ọ bụ obere ma ọ bụrụ na ọ dị mkpa.

Nchọpụta Ọkụ Ọkụ Na-eweta Ike LED Diagnostics:

Ikanam		Ọkwa inye ike
Uhie (DC)	Green (AC)	Ọkwa inye ike
ON	ON	Ọnọdụ ọrụ nkịtị.
ON	Gbanyụọ	Mfu nke AC. Ike inye batrị guzoro ọtọ.
Gbanyụọ	ON	Enweghị mmepụta DC. Mkpirisi sekit ma ọ bụ ọnọdụ ebufe ọkụ.
Gbanyụọ	Gbanyụọ	Enweghị mmepụta DC. Mfu nke AC. Achụpụrụ batrị.

Uhie (Bat)	Ọnọdụ batrị
ON	Ọnọdụ ọrụ nkịtị.
Gbanyụọ	Batrị ada ada/obere batrị.

Nchọpụta Ọkụkụ nke Onye njikwa ike nweta:

Ikanam	ON	Gbanyụọ
LED 1-Ikanam 8 (Uhie)	Mbupute relay (s) na-enye ike.	Mgbasa ozi (s) arụpụtaghị ike.
Trg (Green)	Ntinye FACP kpalitere (ọnọdụ mkpu).	FACP nkịtị (ọnọdụ enweghị mkpu).

Ngosipụta ngwụcha Board Supply Power:

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
L, N	Jikọọ 220VAC 50/60Hz na njedebe ndị a: L na-ekpo ọkụ, N na-anọpụ iche.
+ DC —	Maxima111DV - 12VDC (0 3.5A ma ọ bụ 24VDC @ 2.7A ruo bọọdụ ACM8CB. Maxima133DV – 12VDC © 5.5A ma ọ bụ 24VDC @ 5.7A gaa na bọọdụ ACM8CB. Maxima155DV – 12VDC © 9.5A gaa na bọọdụ ACM8CB. Maxima177DV – 24VDC © 9.7A gaa na bọọdụ ACM8Cb. Maxima175DV – otu (1) 12VDC @ 9.5A ike ọkọnọ ACM8CB bọọdụ na otu (1) 24VDC @ 9.7A ike ọkọnọ ACM8CB osisi.
AC FAIL NC, C, NO	Na-egosi mfu nke ike AC. Relay na-enwekarị ike mgbe ike AC dị. Ogo kọntaktị 1A @ 28VDC. A na-akọpụta ọdịda AC ma ọ bụ brownout n'ime nkeji 1 nke mmemme.
BAT FAIL NC, C, NO	Na-egosi ọnọdụ batrị dị ala, dịka njikọ iji nweta njikwa njikwa agba agba agba agba agba agba mgbe ike DC dị. Ogo kọntaktị 1A @ 28VDC. A na-akọ batrị ewepụrụ n'ime nkeji ise. A na-akọ njikọghachi batrị n'ime nkeji 5. Ọkwa batrị dị ala: 12VDC mmepụta ụzọ atọrọ @ odika 10.5VDC. 24VDC mmepụta ụzọ atọrọ @ odika 21VDC.
+ BAT —	Njikọ batrị kwụrụ ọtọ. Jikọọ otu (1) 12VDC batrị na njedebe akara [+ BAT -] maka ọrụ 12VDC (Fig 3, pg. 10, Fig. 5, pg. 12). Jiri batrị abụọ (2) 12VDC wired na usoro maka ọrụ 24VDC (Fig 3-5, pgs 10-12).

Nweta njirimara njedebe onye njikwa ike:

Akụkọ Mgbe Ebighị Ebi	Ọrụ/Nkọwa
- Ike +	Ntinye 12VDC ma ọ bụ 24VDC sitere na bọọdụ ọkọnọ ike.
- Njikwa + (naanị ọdabara maka Maxima111D10	Enwere ike ijikọ ọnụ ọnụ ndị a na UL Edepụtara ikike njikwa ikike nwere oke ohere iji nye ike ọrụ dịpụrụ adịpụ maka ACM8CB (a ga-ewepụrịrị jumpers J1 na J2). A ga-emerịrị njikọ wiring ubi niile site na iji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe ngbanwe kwekọrọ), (Figs. 6a-9a, pgs. 13-16).
IHE NDỊ MMADỤ 1 – NTỤTA 8 IN, GND	Site na ntinye na-emepe emepe na/ma ọ bụ meghere ihe ntinye ihe na-emepe onye nchịkọta (rịọ ka ịpụpụ bọtịnụ, pụọ PIRs, wdg)
Mpụta 1 - Mbupute 8 NC, C, NO, COM	12VDC ruo 24VDC na-akpalite nsonaazụ a na-achịkwa: Ọdịda-Nchekwa [NC nti (+) & COM adịghị mma (-) 1, Ọdịda-nchekwa [Onweghị ezigbo (+) & COM Negative H], Ntinye aka [C positive (+) & COM Negative (—)] mgbe ị na-eji ike ọkụ ọkụ AC adịghị mkpa ka a hụ ya), NC, C, NO tọghatara gaa n'ụdị nkụ “C” 5A 24VACNDC gosipụtara nsonaazụ akọrọ mgbe ewepụrụ fuses. Egosiri kọntaktị na steeti anaghị akpalite.
FACP INTERFACE T, + INPUT —	Ọkụ mkpu Interface na-akpalite ntinye sitere na FACP. Ntinye ntinye nwere ike imeghe nke ọma, na-emechikarị ya site na mmepụta sekit mgbama FACP (Figs 10-15, pg. 17, 18).
FACP INTERFACE NC, C, NO	Ụdị kọntaktị relay “C” nwere akara @ 1A/28VDC maka mkpesa mkpu.

Nkọwapụta batrị na bọọdụ na-eweta ike:

Ụdị Altronix	Board na-enye ike	Batrị	20 Min. nke ndabere	4 Hr. nke ndabere	24 Hr. nke ndabere
Maxima111DV	AL400XB2V (tụ aka na Fig. la, pg. 9 maka mgbanwe (SW1] ọnọdụ na ọnọdụ)	12VDC/40AH*	N/A	3.5A	0.5A
Maxima111DV		24VDC/40AH*	N/A	2.7A	0.7A
Maxima133DV	AL600XB220 (tụ aka na Fig. la, pg. 9 maka ịgbanwee ISW1] ọnọdụ na ọnọdụ)	12VDC / 40AH*	N/A	5.5A	5.5A
Maxima133DV		24VDC/40AH*	N/A	5.5A	0.7A
Oke55D Maxima175D	AL1012XB220 (Ụlọ ọrụ atọrọ na 12VDC)	12VDC/12AH	9.0A	Ike batrị maka echere ihe mberede opekata mpe 20 min	N/A
Maxima175DV	Ọnụahịa kasị elu nke AL1024XB2V (Ụlọ ọrụ atọrọ na 24VDC)	24VDC/12AH	7.7A	1.2A	N/A
Maxima177DV	Ọnụahịa kasị elu nke AL1024XB2V (Ụlọ ọrụ atọrọ na 24VDC)	24VDC/65AH*	N/A	7.7A	1.2A

* Mara: Achọrọ mkpuchi batrị agbakwunyere (Fig. 6-9, pg, 13-16)

Mpụta Board Na-enye Ike Voltage Ntọala:

Nweta eserese ngwa ngwa njikwa ike (maka ACM8CB ọ bụla):

Fig. 3 - Maximal11DV, Maximal33DV, Maximal55DV

Debe wiwi nwere oke ike na enweghị oke. Jiri opekempe 0.25" oghere. Ihe ruru batrị anọ (4) 12AH nwere ike ịchaji bụ batrị kacha ibu nwere ike dabara na ogige a. Ekwesịrị iji mkpuchi batrị mpụga ma ọ bụrụ na ị na-eji batrị 40AH ma ọ bụ 65AH.

Foto nke 4 - Kachasị 75DV

Foto nke 5 - Kachasị 77DV

Debe wiwi nwere oke ike na enweghị oke. Jiri opekempe 0.25" oghere. Ihe ruru batrị anọ (4) 12AH nwere ike ịchaji bụ batrị kacha ibu nwere ike dabara n'ogige a. Ekwesịrị iji mkpuchi batrị mpụga ma ọ bụrụ na ị na-eji batrị 40AH ma ọ bụ 65AH.

Achọrọ Wiring nwere oke ike NEC maka Maximal11DV:

Wiring sekit nwere oke na enweghị ike ga-anọrịrị iche na kọbọd. Wiring sekit niile nwere oke ike ga-anọrịrị opekata mpe 0.25 ″ site na wiwi sekit ọ bụla na-enweghị oke. Ọzọkwa, eriri sekit niile nwere oke ike na eriri sekit na-enweghị ike ga-abanye ma pụọ na kabinet site na ụzọ dị iche iche. Otu dị otú ahụ exampE gosipụtara nke a n'okpuru. Ngwa gị akọwapụtara nwere ike ịchọ ka a ga-eji mkpọpu ikuku dị iche iche. Enwere ike iji ọkpọ ọkpọ ọ bụla mee ihe. Maka ngwa nwere oke ike iji conduit bụ nhọrọ. A ga-emerịrị njikọ wiwi ubi niile na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie ya).

Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi wụnye waya CM ma ọ bụ FPL nwere jaketị (Fig 6a).

Achọrọ Wiring nwere oke ike NEC maka Maximal33DV na Maximal55DV:

Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi wụnye waya CM ma ọ bụ FPL nwere jaketị (Fig 7a).

Achọrọ Wiring nwere oke ike NEC maka Maximal75DV:

Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi wụnye waya CM ma ọ bụ FPL nwere jaketị (Fig 8a).

Achọrọ Wiring nwere oke ike NEC maka Maximal77DV:

Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi wụnye waya CM ma ọ bụ FPL nwere jaketị (Fig 9a).

Eserese FACP/Nhọrọ inye nkwado ike:

Foto.

Fig. 11 Ntinye ngbanwe nke polarity sitere na mmepụta sekit mgbama FACP (a na-ezo aka na polarity na ọnọdụ mkpu):

Fig. 12 Na-emepe emepe - ntinye FACP anaghị ejide ya:

Fig. 13 Mepee ngwa ntinye FACP Latching na-eji nrụpụtagharị:

Fig. 14 Emechiri nke ọma - ntinye FACP anaghị ejide ya:

Fig. 15 Emechiri emechi - Ndochi ntinye FACP na-emegharị ya na nrụpụta:

ndetu:
_________________________________

Akụkụ Mkpuchi (H x W x D ihe ruru):

26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm)

Altronix abụghị maka mmejọ ederede ọ bụla.
140 58th Street, Brooklyn, New York 11220 USA | ekwentị: 718-567-8181 | faksị: 718-567-9056
websaịtị: www.altronix.com | ozi-e: info@altronix.com | Akwụkwọ ikike ndụ

IIMaximal11DV/33DV/55DV/75DV/77DV Series
G27U
Maximal11DV/ Maximal33DV/ Maximal55DV/ Maximal75DV/ Maximal77DV Ntuziaka ntinye ike nchịkwa ohere (PTC)

Akwụkwọ / akụrụngwa

Altronix Maximal DV Series Dual Power Supply Access Controllers [pdf] Ntuziaka nwụnye
Kachasị DV Series Dual Power Supply Access Controllers Power Power, Maximal DV Series, Dual Power Supply Access Power Controllers, Power Supply Access Power Controllers, Access Power Controllers, Power Controllers, Controllers

Ntụaka

Akwụkwọ ntuziaka onye ọrụ