Altronix Maximal3D Otu Nnweta Ike Nweta Ntuziaka nwụnye ndị njikwa ike

Ndị na-ahụ maka ohere ịnweta ike na-ekesa ma gbanwee ike iji nweta sistemụ njikwa na ngwa. Ha na-atụgharị ntinye 115VAC 60Hz ka ọ bụrụ iri na isii (16) na-achịkwa 12VDC ma ọ bụ 24VDC Class 2 nke nwere oke ikike PTC kwadoro. A na-arụ ọrụ mmepụta ya site na sink onye na-anakọta oghe ma ọ bụ na-emeghekarị (NO) ntinye ọkụ ọkụ sitere na Sistemụ Njikwa Nweta, ahụigodo, bọtịnụ Push, REX PIR, wdg. nkeji ga-ebufe ike gaa n'ọtụtụ ngwaọrụ njikwa ngwaike gụnyere: Mag Locks , Eletriki Strikes, Magnetic Door Holders, wdg FACP Interface na-enyere aka Mberede Mberede, Oti mkpu, ma ọ bụ enwere ike iji kpalite ngwaọrụ inyeaka ndị ọzọ. A na-ahọrọ njirimara nkwụsị ọkụ ọkụ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke iri na isii (16). Ngwa niile ejikọrọ ga-abụ UL Edepụtara.

Chaatị nhazi nhazi usoro D kacha:

*ANSI/UL 294 7th Ed. Nweta ọkwa arụmọrụ njikwa:
Mwakpo mbibi – I; Ntachi obi - I; Nchekwa ahịrị - I; Ikike guzoro - I, IV.

Atụmatụ usoro MaximalD:

Iri na isii (16) na-ebute nsonaazụ a na-achịkwa n'onwe ya. Nhọrọ mmepụta:
a) Iri na isii (16) Mwepụta ike nzacha na nke eletrọnịkị na-achịkwa nke dara ada.
b) Iri na isii (16) Mwepụta ike nzacha na nke eletrọnịkị na-achịkwa nke dara ada.
c) Ngwakọta ọ bụla nke dị n'elu.

Iri na isii (16) Ntinye njikwa sistemụ na-akpalite ntinye. Nhọrọ ịkpalite ntinye:
a) Iri na isii (16) na-emeghekarị (MHỤKWU) ntinye mkpali akọrọ.
b) Ntinye iri na isii (16) ghe oghe.
c) Ngwakọta ọ bụla nke dị n'elu.
Iri na isii (16) nzacha na nzacha eletrọnịkị aux. mmepụta ike (a na-edepụta mmepụta @ 2.5A).

Igwe ọkụ na-acha uhie uhie na bọọdụ ACM8CB na-egosi na a na-ebute nsonaazụ nke onye ọ bụla (gbanye ọkụ).
Mwepu mkpu oku ọkụ (latching ma ọ bụ enweghị nkwụsị) bụ nke a na-ahọrọ n'otu n'otu maka ihe ọ bụla ma ọ bụ niile nke iri na isii (16).
Nhọrọ ntinye ihe mgbanye mgbanyụ ọkụ:
a) Ndenye mkpalite akọrọ na-emepe nke ọma (MENWEE) ma ọ bụ mechiri emechi (NC).
b) Ntinye ngbanwe polarity sitere na sekit mgbama FACP.

Green LED na bọọdụ ACM8CB na-egosi nkwupu FACP kpalitere.
Mgbasa ozi FACP na-egosi na ntinye FACP na-akpalite (ụdị kọntaktị “C” nwere akara @ 1A/28VDC, UL anaghị enyocha ya).

Awụnyela ihe ntinye ọkụ ọkụ ụlọ nrụpụta. Ọ na-enye ike nkịtị maka bọọdụ ACM8CB yana ngwaọrụ njikwa ohere niile ejikọrọ.
ACM8CB bọọdụ isi fuses ka akara @ 10A. A na-edepụta PTCs @ 2.5A.

Chaja arụnyere n'ime maka acid a na-emechi ma ọ bụ batrị ụdị batrị.
- Kachasị ụgwọ ugbu a bụ 0.7A maka AL600ULXB na AL1012ULXB ike ọkọnọ mbadamba.
- Kacha cha cha ugbu a bụ 3.6A maka AL1024ULXB2 ike ọkọnọ osisi.
Gbanwee akpaaka ka batrị nọrọ na-echere mgbe AC dara.
Zero voltage dobe mgbe unit gafere na ndabere batrị (ọnọdụ ọdịda AC).

Mkpirisi sekit na nchekwa oke ọkụ yana nrụpụta akpaaka.
Ntinye aka Green AC na ihe ngosi ọkụ DC na-acha uhie uhie na bọọdụ ọkọnọ ike.
AC dara nleba anya (ụdị kọntaktị “C” nwere akara @ 1A/28VDC).
Batrị dara na nlekọta ọnụnọ batrị (ụdị kọntaktị “C” nwere akara @ 1A/28VDC).

Mkpọchi na-anabata ihe ruru batrị anọ (4) 12VDC/12AH.
Akụkụ mkpuchi (H x W x D): 26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm).

Ntuziaka nwụnye MaximalD:

Ụzọ wiwi ga-adị n'ụzọ kwekọrọ na National Electric Code/NFPA 70/ANSI, yana koodu mpaghara na ndị ọchịchị niile nwere ikike. Ezubere ngwaahịa maka naanị ime ụlọ.

Nchọpụta Ọkụ Ọkụ Na-enye Ike LED Diagnostics
Ịnweta ihe nleba anya nke ọkụ ọkụ LED
Ngosipụta njedebe Board Supply Board
Nweta njirimara njedebe onye njikwa ike
Nkọwapụta batrị na-akwado bọọdụ na-eweta ike
Mpụta Board Na-enye Ike Voltage Ntọala
Nweta eserese ngwa ngwa njikwa ike
Eserese njikọ FACP

Wunye otu n'ime ebe achọrọ. Kaa akara na prerill oghere na mgbidi ka kwụ n'ahịrị na oghere igodo atọ dị n'elu n'ime ogige ahụ. Wụnye ihe nkwụnye elu atọ na skru na mgbidi na isi ihe nkedo na-apụta. Tinye oghere igodo elu nke ogige ahụ n'elu kposara elu atọ; larịị na nchekwa. Kaa akara ọnọdụ nke oghere atọ dị ala. Wepu ihe mkpuchi ahụ. Gwuo oghere ndị dị ala ma wụnye ngwa ngwa atọ. Tinye oghere igodo elu nke ogige n'elu skru atọ dị elu. Wụnye skru atọ dị ala ma jide n'aka na ị ga-eme ka skru niile sie ike ( Akụkụ mkpuchi, pg. 16).

A na-ebute ụzọ ọkụ ọkụ na ala (chassis). Jikọọ isi ala na-abata na ndu ndu n'ala akwụkwọ ndụ akwụkwọ ndụ enyere. Jikọọ ike AC akwụghị ụgwọ (115VAC 60Hz) na njedebe akara [L, N] na bọọdụ ọkọnọ ọkụ. Green “AC” LED na bọọdụ ọkọnọ ike ga-agbanye. Enwere ike ịhụ ọkụ a site na oghere LED na ọnụ ụzọ nke ogige ahụ. Jiri 14 AWG ma ọ bụ karịa maka njikọ ike niile.
Debe wiwi nwere oke ike na wiwi na-enweghị oke.
Opekempe 0.25" oghere ga-enyerịrị (Figs. 5-7, pgs. 10-12).
Ịkpachara anya: Emetụla akụkụ ọla ndị ekpughere ekpughere aka. Mechie ike sekit alaka ụlọ ọrụ tupu ịwụnye ma ọ bụ na-arụ ọrụ. Enweghị akụkụ ndị ọrụ nwere ike ịrụ ọrụ n'ime.
Tụtụ aka na nrụnye na ọrụ nye ndị ọrụ ruru eru.
Họrọ mmepụta DC chọrọ voltage site na ịtọ SW1 n'ọnọdụ kwesịrị ekwesị na ike ọkụ Maximal3D, (Fig 1 na 1a, pg. 8). Maximal5D ike ọkọnọ bụ factory atọrọ na 12VDC na Maximal7D ike
ọkọnọ bụ factory atọrọ na 24VDC.

Tule mmepụta voltage nke unit tupu ijikọ ngwaọrụ ọ bụla iji hụ na arụ ọrụ kwesịrị ekwesị. Na-ezighi ezi ma ọ bụ elu voltage ga-emebi ngwaọrụ ndị a.
Nhọrọ mmepụta (Fig. 2, pg. 8):
Ngalaba ahụ ga-enye ma ọ bụ ihe ọkụ ọkụ iri na isii (16).
(a) Mbupute ọkụ agbanweela nke ọma:
Maka arụmọrụ Fail-Safe jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na njedebe akara [NC]. Jikọọ ntinye adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].
(b) Mbupute ọkụ agbanweela nke dara ada:
Maka ọrụ Fail-Secure jikọọ ndenye dị mma (+) nke ngwaọrụ njikwa ohere na njedebe akara [NO]. Jikọọ ntinye adịghị mma (-) nke ngwaọrụ njikwa ohere na njedebe akara [COM].

Nsonaazụ ike inyeaka (anaghị agbanwe):
Jikọọ ngwaọrụ njikwa ohere nke chọrọ ike mgbe niile na njedebe akara [C] nti (+) na [COM] adịghị mma (-).
Nhọrọ ntinye ntinye (Fig. 2, pg. 8):
(a) Na-emepekarị mkpalite ntinye [NO]:
Ntinye 1-8 na-arụ ọrụ site na ntinye sink na-emeghe ma ọ bụ mepere emepe.
Jikọọ ntinye njikwa njikwa ohere, ahụigodo, bọtịnụ ntinye, REX PIRs, wdg na njedebe akara [IN] na [GND]. (b) Mepee ihe ntinye ihe mkpokọ mkpokọta:
Jikọọ ogwe njikwa ohere mepere onye na-anakọta sink positive (+) na ọdụ akara akara [IN] yana nke ọjọọ (-) na njedebe akara [GND].

Nhọrọ Interface Oti mkpu (fig. 8-12, pg. 14):
Ntinye ntinye nke emechiri emechi [NC] ma ọ bụ nke na-emeghe [NO] site na ogwe njikwa ọkụ ma ọ bụ ndenye ngbanwe polarity sitere na sekit mgbama FACP ga-emetụta nsonaazụ ahọpụtara.
Iji mee ka FACP kwupu maka mmepụta, gbanye mgba ọkụ kwekọrọ na bọọdụ ACM1CB ọ bụla. Iji gbanyụọ nkwụsị FACP maka mmepụta, tụgharịa mgba ọkụ kwekọrọ na bọọdụ ACM8CB ọ bụla.
(a) Ntinye [NO] na-emepe nke ọma:
Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 9, pg. 14. N'ihi na latching nko-elu na-ezo aka na Fig. 10, pg. 14.
(b) Ntinye [NC] na-emechikarị:
Maka nko-elu na-adịghị ejigide na-ezo aka na Fig. 11, pg. 14. N'ihi na latching nko-elu na-ezo aka na Fig. 12, pg. 14.
(c) FACP mgbama mgbanye mgbanye mgbanye sekit:
Jikọọ ihe dị mma (+) na nke na-adịghị mma (-) site na mmepụta sekit mgbama FACP na njedebe akara [+ INP -]. Jikọọ FACP EOL na njedebe akara [+ RET -] (a na-ezo aka na polarity na ọnọdụ mkpu). Jumper dị n'akụkụ TRG LED ga-ebipụ (Fig 2a, pg. 7 na Fig. 8, pg. 14).
Ụdị akọrọ FACP “C” mmepụta (Fig. 2b, pg. 7):
FACP ụdị "C" nwere ike iji kpalite mkpesa ma ọ bụ ngwaọrụ mgbaàmà.
Kọntaktị ndị a na-agbanye n'elu ntinye oti mkpu ọkụ na-akpalite na bọọdụ ACM8CB.

Njikọ batrị guzoro n'akụkụ (fig. 3-7, pg. 9-13):
Maka ngwa njikwa nnweta batrị bụ nhọrọ. Ọ bụrụ na ejighị batrị, mfu nke AC ga-ebute mfu nke mmepụta voltage. Batrị ga-abụrịrị ụzọ acid ma ọ bụ ụdị gel. Jikọọ otu (1) 12VDC batrị na
ọnụ ọnụ akara [+ BAT -] maka ọrụ 12VDC (Fig 3a, pg. 9). Jiri batrị abụọ (2) 12VDC etinyere n'usoro maka ọrụ 24VDC.
Ihe nrụpụta batrị na AC (fig. 3-4, pg. 9-10):
Ọ chọrọ ijikọ ngwaọrụ mkpesa nsogbu nlekọta na mpụta akara ngosi [AC Fail, BAT FAIL] akara ngosi [NC, C, NO] na ngwaọrụ ngosi ngosi kwesịrị ekwesị.
Jiri 22 AWG ruo 18 AWG maka AC ọdịda & obere/enweghị mkpesa batrị.
Ntinye nke tamper mgba ọkụ (anaghị etinye ya) (Fig. 3b-4a, pg. 9-10):
Ugwu UL Edepụtara tamper mgba ọkụ (Altronix Model TS112 ma ọ bụ dakọtara) n'elu nke ogige. Gbanye tamper mgbanaka nkwado n'elu nsọtụ nke ihe mkpuchi ahụ dịka 2" site n'akụkụ aka nri (Figs. 3b na 4a, pgs. 9-10). Jikọọ tampgbanwee wiring gaa na ntinye Ogwe njikwa nnweta ma ọ bụ ngwaọrụ mkpesa UL Edepụtara kwesịrị ekwesị. Iji mee ka mgbaama mkpu rụọ ọrụ, mepee ọnụ ụzọ nke ogige ahụ.

Nlekọta:

A ga-anwale nkeji opekata mpe otu ugboro n'afọ maka ịrụ ọrụ kwesịrị ekwesị dịka ndị a:

Nchọpụta Ọkụ Ọkụ Na-eweta Ike LED Diagnostics:

Nchọpụta Ọkụkụ nke Onye njikwa ike nweta:

Ngosipụta ngwụcha Board Supply Power:

Nweta njirimara njedebe onye njikwa ike:

Nkọwapụta batrị na bọọdụ na-eweta ike:

Mpụta Board Na-enye Ike Voltage Ntọala:

Nweta eserese ngwa ngwa njikwa ike
(maka ACM8CB ọ bụla):

Maximal3D na Maximal5D

Ihe osise 3

Oke7D

Ihe osise 4

Achọrọ Wiring nwere oke ike NEC maka Maximal3D:

Wiwi sekit nwere oke na enweghị ike ga-anọrịrị iche na kọbọd. Waịkọ sekit niile nwere oke ike ga-anọrịrị opekata mpe 0.25” pụọ na wiwi sekit enweghị oke ike. Ọzọkwa, eriri sekit niile nwere oke ike yana eriri sekit na-enweghị ike ga-abanye ma pụọ na kabinet site na ụzọ dị iche iche. Otu dị otú ahụ exampE gosipụtara nke a n'okpuru. Ngwa gị akọwapụtara nwere ike ịchọ ka a ga-eji mkpọpu ikuku dị iche iche. Enwere ike iji ọkpọ ọkpọ ọ bụla mee ihe. Maka ngwa nwere oke ike iji conduit bụ nhọrọ. Ogige niile
A ghaghị ime njikọ wiring na-eji waya CM ma ọ bụ FPL nwere jaket dabara adaba (ma ọ bụ ihe dochie anya).
Mara: Rụtụ aka na eserese njikwa waya dị n'okpuru maka ụzọ kwesịrị ekwesị isi wụnye waya CM ma ọ bụ FPL nwere jaketị (Fig 5a).

Achọrọ Wiring nwere oke ike NEC maka Maximal5D:

Achọrọ Wiring nwere oke ike NEC maka Maximal7D:

Eserese FACP Hook Up:

Akụkụ Mkpuchi

(H x W x D ihe ruru):
26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm)

Altronix abụghị maka mmejọ ederede ọ bụla.
140 58th Street, Brooklyn, New York 11220 USA | ekwentị: 718-567-8181 | faksị: 718-567-9056
websaịtị: www.altronix.com | e-mail: info@altronix.com | Akwụkwọ ikike ndụ
Usoro IMaximal3D/5D/7D

Gụkwuo maka akwụkwọ ntuziaka a wee budata PDF:

Akwụkwọ / akụrụngwa

Altronix Maximal3D Single Power Supply Access Controllers [pdf] Ntuziaka nwụnye
Maximal3D, Maximal5D, Single Power Supply Access Power Controllers, Nweta ikike nchịkwa, nnweta ikike njikwa, Maximal3D, ike njikwa

Ntụaka

Akwụkwọ ntuziaka onye ọrụ