ZKTECO SenseFace 3 Series Multi-Biometric Access Control Terminal

gafereview

1. Igwe okwu
2. Igwefoto
3. Flash infrared dị nso
4. Ihuenyo mmetụ 2.8-inch
5. Sensọ akara mkpịsị aka
6. Mpaghara Ọgụgụ Kaadị
7. Tọgharia
8. USB Interface
9. Ọkà okwu
10. Tampnke Switch
11. Ngọngọ na-enweghị njedebe

Rịba ama: Not all products have the function with, the real product shall prevail.

Gburugburu nwụnye

Ntinye ngwaọrụ

Wụnye na mgbidi

1. Tinye ihe mmado nke template arịọnụ n'ahụ mgbidi ahụ, ma gbanye oghere dịka akwụkwọ nkwụnye ahụ si dị.
2. Idozi azụ azụ na mgbidi na skru na-ebuli mgbidi.
3. Mgbe ị gafechara wires site na oghere wiring wee jikọọ ha na ngwaọrụ ahụ, wee jide ngwaọrụ ahụ na efere azụ wee kwaba ya n'ime ebe.
4. Jiri ihe nchekwa kechie ngwaọrụ ahụ na efere azụ.

Nwụnye nke kwụụrụ onwe ya

Ngọngọ na-enweghị njedebe

Njikọ Ethernet

Mepụta njikọ dị n'etiti ngwaọrụ na ngwanrọ site na iji eriri Ethernet. Ihe atụ exampA na-enye ya n'okpuru:

Pịa ịbanye na isi menu. Wee pịa [Comm.]> [Ethernet]> [Adreesị IP] ka itinye adreesị IP.

Rịba ama: Na LAN, adreesị IP nke ihe nkesa (PC) na ngwaọrụ ahụ ga-adị n'otu mpaghara netwọk mgbe ị na-ejikọta na ngwanrọ.

Njikọ Ike

Bọtịnụ Wepụ, Ihe mmetụta Ọnụ ụzọ & Njikọ Enyemaka

RS485 njikọ

Njikọ Mgbasa Ozi Mkpọchi

Sistemu na-akwado ma Mkpọchi emepere nke ọma yana Mkpọchi emechiri nke ọma. Ejikọtara NO LOCK (nke a na-emeghekarị na ọkụ) na njedebe 'NO' na 'COM', yana NC LOCK (na-emechikarị na ọkụ) jikọtara ya na ọdụ 'NC' na 'COM'. Were NC Lock dị ka onye mbụampn'okpuru:

1. Ngwaọrụ anaghị ekekọrịta ike na mkpọchi
2. Ike ikesa ngwaọrụ na mkpọchi

Njikọ Wiegand Reader

Rịba ama: A na-ekekọrịta Wiegand interface, onye ọrụ nwere ike ịhọrọ iji ma ọ bụ ntinye Wiegand ma ọ bụ ọrụ mmepụta Wiegand iji jiri ngwaọrụ Wiegand dị iche iche jikọọ.

Ndebanye aha onye ọrụ

Pịa to enter the Main Menu screen. When a super administrator is set up, administrator verif ication is required when entering the menu. For security purposes, it is recommended to register a super administrator when using it for the f irst time.

Usoro 1: Ịdenye aha na ngwaọrụ

Pịa > [User Mgt.] > [New User] to register a new user. The options include enter-ing the user ID and Name, setting User Role and Access Control Role, registering Face, Fingerprint, Card Number, Password and Profi le Photo.

Usoro 2: Debanye aha na ZKBio CVA Access software

Biko tọọ adreesị IP na adreesị ozi igwe ojii na COMM. nhọrọ menu na ngwaọrụ.

1. Pịa [Nnweta]> [Ngwaọrụ Nweta]> [Ngwaọrụ]> [Chọọ] ka ịchọọ ngwaọrụ dị na ngwanrọ. Mgbe edobere adreesị ihe nkesa na ọdụ ụgbọ mmiri kwesịrị ekwesị na ngwaọrụ ahụ, ngwaọrụ ndị achọtara na-egosipụta na-akpaghị aka.
2. Pịa [Tinye] na kọlụm ọrụ, windo ọhụrụ ga-apụta. Họrọ ụdị akara ngosi, Mpaghara, na Tinye na ọkwa site na mkpọda ọ bụla wee pịa [OK] ka ịgbakwunye ngwaọrụ. Pịa [Onye ọrụ]> [Onye]> [Ọhụrụ] wee dejupụta mpaghara niile achọrọ ka ịdebanye aha ndị ọrụ ọhụrụ na ngwanrọ ahụ.
3. Pịa [Nnweta]> [Ngwaọrụ]> [Njikwa]> [Mekọrịta data niile na ngwaọrụ] iji mekọrịta data niile na ngwaọrụ ahụ gụnyere ndị ọrụ ọhụrụ.
4. Maka nkọwa ndị ọzọ, biko rụtụ aka na ntuziaka onye ọrụ ZKBio CVAccess.

Usoro 3: Debanye aha na ekwentị

Ozugbo arụnyere ngwanrọ ZKBio CVAccess, ndị ọrụ nwere ike debanye aha ihu ha site na ngwa ihe nchọgharị na ekwentị mkpanaaka nke ha.

1. Pịa [Onye ọrụ]> [Parameters], tinye ''http://adreesị nkesa: Port'' na koodu QR URL mmanya. Akụrụngwa ga-ewepụta koodu QR na-akpaghị aka. Nyochaa koodu QR ma ọ bụ banye na ''http://adreesị nkesa: Port/app/v1/adreg'' site na ekwentị mkpanaaka ka ịdebanye aha ndị ọrụ.
2. A ga-egosipụta ndị ọrụ na [Personnel]> [Pending Review].

Ntọala Ethernet na igwe ojii

• Pịa > [COMM.] > [Ethernet] ịtọ ntọala netwọkụ. Ọ bụrụ na nkwurịta okwu TCP/IP nke ngwaọrụ ahụ na-aga nke ọma, na A ga-egosipụta akara ngosi n'akụkụ aka nri elu nke interface njikere.
• Pịa > [COMM.]> [Cloud Server Setting] ka ịtọọ adreesị ihe nkesa na ọdụ ụgbọ mmiri, ya bụ, adreesị IP na nọmba ọdụ ụgbọ mmiri nke ihe nkesa mgbe arụnyere ngwanrọ. Ọ bụrụ na ngwaọrụ na-ekwurịta okwu na ihe nkesa nke ọma, na A ga-egosipụta akara ngosi n'akụkụ aka nri elu nke interface njikere.

Rịba ama: Ka ị na-ejikọta ngwaọrụ na ngwanrọ ZKBio CVAccess. Jide n'aka na nhọrọ Kwado ngalaba aha enweghị nkwarụ yana adresị nkesa na ọdụ ụgbọ mmiri ziri ezi.

Configuring Wi-Fi★

Pịa ka view the menu. Click [COMM.] > [Wi-Fi Settings] to configuring Wi-Fi. When Wi-Fi is enabled, select the searched network. Enter the password, and click Connect to Wi-Fi (OK). The connection succeeds, with icon egosiri na ogwe ọkwa. Ị nwekwara ike họrọ Tinye netwọk Wi-Fi ka ịtinye Wi-Fi aka.

Jikọọ ọnụ ụzọ mgbịrịgba ikuku★

Ekwesịrị iji mgbịrịgba ọnụ ụzọ ikuku rụọ ọrụ a. Nke mbụ, ike na mgbịrịgba ọnụ ụzọ ikuku. Mgbe ahụ, pịa ma jide bọtịnụ egwu maka 1.5 sekọnd ruo mgbe ihe ngosi na-egbuke egbuke iji gosi na ọ nọ na ọnọdụ njikọta. Mgbe nke ahụ gasịrị, pịa akara ngosi ngwaọrụ. If the wireless doorbell rings and the indicator flashes, it means the connection is successful.

Mgbe ijikọ na-aga nke ọma, ịpị akara ngosi nke ngwaọrụ ga-akụ mgbịrịgba ọnụ ụzọ ikuku.

Rịba ama: N'ozuzu, ngwaọrụ ọ bụla na-ejikọta na otu mgbịrịgba ọnụ ụzọ ikuku.

Ntọala SIP

Ịtọ ntọala oku na ngwaọrụ

Pịa > [Intercom]> [Ntọala SIP]> [Nhọrọ oku] ka ịtọ ntọala SIP nkịtị.

Ụdị 1: Netwọk Mpaghara Mpaghara

Rịba ama: Mgbe arụnyere ọrụ nkesa SIP, anaghị egosipụta menu ndepụta kọntaktị. Ka ijiri Ndepụta kọntaktị, gbanyụọ sava SIP.

A na-akpọ site na adreesị IP

1. Tọọ adreesị IP n'ọdụ ime ụlọ, Kpatụ [NchNhr]> [Advanced]> [Network]> [1. Netwọk] > [1. IPv4].
   • Rịba ama: Adreesị IP ọdụ ime ụlọ na adreesị IP ngwaọrụ ga-abụrịrị n'otu mpaghara netwọkụ ahụ.
2. Pịa akara ngosi na ibe nọrọ na njikere ịbanye na ibe oku, ndị ọrụ nwere ike ịkpọ adreesị IP nke ọdụ ime ụlọ.

Oku site na ụzọ mkpirisi

1. Pịa > [Intercom]> [Ntọala SIP]> [Ndepụta kọntaktị].
2. Pịa [Tinye], tinye nọmba ngwaọrụ na adreesị oku ka ịgbakwunye onye otu kọntaktị ọhụrụ. Mara: Adreesị oku na ngwaọrụ ga-adịrịrị n'otu mpaghara netwọkụ ahụ.
3. Pịa [Ntọala SIP]> [Ntọala ụzọ mkpirisi ịkpọ oku], họrọ ihe ọ bụla ma e wezụga admin, wee tinye ozi ụdị ị bugoro.
4. Mgbe ahụ ị nwere ike tinye nọmba ngwaọrụ ma ọ bụ pịa igodo ụzọ mkpirisi na ihuenyo oku iji mejuputa intercom vidiyo ozugbo.

Ụdị ịkpọ oku ozugbo

1. Pịa > [Intercom]> [Ntọala SIP]> [Ndepụta kọntaktị].
2. Pịa [Tinye], tinye nọmba ngwaọrụ na adreesị oku ka ịgbakwunye onye otu kọntaktị ọhụrụ. Mara: Adreesị oku na ngwaọrụ ga-adịrịrị n'otu mpaghara netwọkụ ahụ.
3. Pịa [Ntọala SIP]> [Ntọala ụzọ mkpirisi ịkpọ oku]> [Ụdị oku]> [Ụdị ịkpọ oku ozugbo]> [Tinye]. Họrọ adreesị IP nke ọdụ ime ụlọ nke ịchọrọ ịkpọ, mgbe ahụ, a ga-egosipụta ọdụ ụgbọ mmiri na ndepụta ahụ.
4. Mgbe ahụ ị nwere ike pịa ya akara ngosi na ngwaọrụ iji kpọọ ọdụ ime ụlọ n'otu oge.

Ụdị 2: sava SIP

1. Pịa > [Intercom]> [Ntọala SIP]> [Ntọala Mpaghara] iji mee ka sava SIP nwee ike.
2. Pịa [Ntọala Akaụntụ Nna-ukwu] / [Ntọala Akaụntụ ndabere] ka ịtọọ paramita nkesa SIP.
3. Pịa akara ngosi dị na ibe nọrọ na njikere ịbanye na ibe oku, ozugbo edobere SIP nke ọma, ntụpọ akwụkwọ ndụ akwụkwọ ndụ ga-apụta n'akụkụ aka nri elu nke ibe oku iji gosi na ejikọrọ ngwaọrụ ahụ na ihe nkesa. Ị nwere ike ịkpọ aha akaụntụ ọdụ ime ụlọ.

Rịba ama: Mgbe ndị ọrụ kwesịrị ime ka ihe nkesa SIP nwee ike, ha kwesịrị ịzụta adreesị ihe nkesa na paswọọdụ site na nkesa, ma ọ bụ wuo ihe nkesa ahụ na obi ike.

Ntọala ONVIF

Ekwesịrị iji ọrụ a na ndekọ vidiyo netwọkụ (NVR).

1. Tọọ ngwaọrụ ahụ n'otu mpaghara netwọkụ dị ka NVR.
2. Click > [Intercom] > [ONVIF Settings] to set the User Name and Password.
   • Rịba ama: Ọ bụrụ na arụghị ọrụ nyocha ahụ, ọ dịghị mkpa itinye aha njirimara na paswọọdụ mgbe ị na-agbakwunye ngwaọrụ na NVR.
3. Na sistemụ NVR, pịa [Malite]> [NchNhr]> [Channel Jikwaa]> [Tinye ọwa]> [Tinye ọhụrụ] iji chọọ ngwaọrụ ahụ.
4. Họrọ igbe nlele maka ngwaọrụ ịchọrọ ịgbakwunye wee dezie paramita dị na mpaghara ederede kwekọrọ, wee pịa [OK] ka ịgbakwunye ya na listi njikọ.
5. Mgbe agbakwunyere nke ọma, onyonyo vidiyo na-enweta site na ngwaọrụ nwere ike ịbụ viewed na ezigbo oge.

Maka nkọwa ndị ọzọ, biko rụtụ aka na ntuziaka onye ọrụ NVR.

Ozi ndị ọzọ

• ZKTeco Industrial Park, Nke 32, Industrial Road,
• Obodo Tangxia, Dongguan, China.
• Ekwentị: +86 769 – 82109991
• Faksị: +86 755 - 89602394
• www.zkteco.com

Ajụjụ

• Ajụjụ: Gịnị ka m ga-eme ma ọ bụrụ na ngwaahịa anaghị arụ ọrụ nke ọma?
  • A: If you encounter any issues with the product’s operation, refer to the troubleshooting section in the user manual or contact our customer support for assistance.
• Ajụjụ: Enwere ike iji ngwaahịa a na gburugburu n'èzí?
  • A: It is recommended to use the product in indoor environments to prevent exposure to extreme conditions that may affect its performance.

Akwụkwọ / akụrụngwa

	ZKTECO SenseFace 3 Series Multi-Biometric Access Control Terminal [pdf] Akwụkwọ ntuziaka onye ọrụ 21010, 2AJ9T-21010, 2AJ9T21010, SenseFace 3 Series Multi-Biometric Access Control Terminal, SenseFace 3 Series, Multi-Biometric Access Control Terminal, Access Control Terminal, Control Terminal, Terminal
	ZKTECO SenseFace 3 Series Multi Biometric Access Control Terminal [pdf] Ntuziaka onye ọrụ SenseFace 3 Series Multi Biometric Access Control Terminal, SenseFace 3 Series, Multi Biometric Access Control Terminal, Biometric Access Control Terminal, Access Control Terminal, Control Terminal

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ