Akwụkwọ ntuziaka
Zigbee Switch Module-L
1CH,2CH,3CH,4CH
（No Neutral Wire Required）
1CH Switch Module-L
Nkọwapụta nka nka
| Ụdị ngwaahịa | Zigbee Switch Module-L |
| Voltage | AC200-240V 50 / 60Hz |
| Oke. ibu | 1CH: 10-100W 2CH: 2x (10-100W) 3CH: 3x (10-100W) 4CH: 4x (10-100W) |
| Ugboro ugboro | 2.405GHz-2.480GHz |
| Ọnọdụ ọrụ. | -10 ℃ + 40 ℃ |
| Protocol | IEEE802.15.4 |
| Oke ọrụ | <100m |
| Dims (WxDxH) | 39.2×39.2×18mm |
| Ogo IP | IP20 |
| Akwụkwọ ikike | afọ 2 |
| Asambodo | CE ROHS |
with a mounting clip
Ịwụnye
Ịdọ aka ná ntị:
- A ga-arụrịrị nrụnye site n'aka onye ọrụ ọkụ eletrik ruru eru dịka iwu obodo siri dị.
- Debe ngwaọrụ ahụ ka ụmụaka ghara iru ya.
- Debe ngwaọrụ ahụ na mmiri, damp ma ọ bụ gburugburu na-ekpo ọkụ.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, resulting to abnormal operation of the device.
- Mgbochi site na mgbidi konkịtị ma ọ bụ ihe ọla nwere ike ibelata oke ọrụ nke ngwaọrụ ahụ ma ekwesịrị ịzere ya.
- Anwala ịkwasa, rụkwaa, ma ọ bụ gbanwee ngwaọrụ.
FAQ
Q1: Kedu ihe m ga-eme ma ọ bụrụ na enweghị m ike ịhazi modul mgba ọkụ?
a. Please check whether the device is powered on. b. Make sure the Zigbee Gateway is available. c. Whether it’s in good internet conditions. d. Make sure the password entered in App is correct. e. Make sure the wiring is correct.
Q2: Kedu ngwaọrụ enwere ike ijikọ na modul mgba ọkụ Zigbee a?
such as a ceiling lamp, panel light, etc.
Q3: Kedu ihe ga - eme ma ọ bụrụ na WIFI apụ?
You can still control the device connected to the switch module with your traditional switch, and once WIFI is active again, the device connected to the module will connect automatically to your WIFI network.
Q4: Gịnị ka m ga-eme ma ọ bụrụ na m agbanwee netwọk WIFI ma ọ bụ gbanwee paswọọdụ?
You have to reconnect our Zigbee switch module to the new Wi-Fi network accordingly, as per the App User
Q5: Kedu ka m ga-esi tọgharịa ngwaọrụ ahụ?
1. Switch on/off the traditional switch 5 times until the indicator light flashes. 2. Press the reset key for about 10 seconds until the indicator light flashes.
Ntuziaka wiring na eserese
- Gbanyụọ ọkụ ọkụ tupu ịrụ ọrụ nrụnye ọkụ eletrik ọ bụla.
- Jikọọ wires dị ka eserese wiring si dị.
- Fanye modul n'ime igbe nkwụsị.
Turn on the power supply and follow the switch module configuration instructions. - Flash after the lights are off. Please attach accessories.
Ịdọ aka ná ntị: Do not connect the neutral line; otherwise, it will be permanently damaged.
1CH Zigbee Switch Module-L
2CH Zigbee Switch Module-L
Ihe osise wiring nke ihe ndozi (L1 L2 Otu n'ime ha)
3CH Zigbee Switch Module-L
Wiring diagram of fittings (L1 L2 L3 One of them)
4CH Zigbee Switch Module-L
Akwụkwọ ntuziaka APP
http://smart.tuya.com/download
IOS APP / gam akporo APP
Scan the QR code to download the Tuya Smart App, or you can also search the keyword “Tuya Smart” on App Store or Google Play to download the App.
Log in or register your account with your mobile number or e-mail address. Type in the verification code sent to your mobile or email, then set your login password. Click “Create Family” to enter the APP.
Mepee ogwe njikwa nke ọnụ ụzọ ZigBee na ngwa
Before making the reset operation, pls make sure the Zigbee Gateway is added and installed to the WIFI network. Ensure that the product is within the range of the Zigbee Gateway Network.
After the wiring of the switch module is done, press the reset key for about 10 seconds or turn on/off the traditional switch 5 times until the indicator light inside the module is flashing quickly for pairing.
Click “+” (Add sub-device) to select the suitable product gateway and follow the on-screen instructions for pairing.
The connection will take about 10-120 seconds to complete, depending on your network conditions.
N'ikpeazụ, ị nwere ike ijikwa ngwaọrụ site na ekwentị mkpanaaka gị.
Achọrọ usoro
WIFI® rawụta
Ọnụ ụzọ ZigBee
iPhone, iPad (iOS 7.0 ma ọ bụ karịa)
Android 4.0 ma ọ bụ karịa
Akwụkwọ / akụrụngwa
 |
Zigbee 1CH Switch Module-L [pdf] Akwụkwọ ntuziaka 1CH Switch Module-L, Switch Module-L, Module-L |