Ntuziaka onye ọrụ mmemme XTOOL X2TPU Module

Ndakọrịta: Ndị ọkachamara ụgbọ ala tuners ma ọ bụ mechanists maka
module cloning, modification, or replacements
Achọrọ ngwaọrụ:
- Ngwa XTool: ụdị APP V5.0.0 ma ọ bụ karịa
- PC: Windows 7 ma ọ bụ karịa, 2GB Ram

Ntuziaka ojiji:

1. Njikọ ngwaọrụ:

Connect the X2Prog to XTool device using the provided cables and
expansion modules as needed.

2. How to Read & Write EEPROM:

Use the EEPROM Board included in the standard pack. Remove the
chip from the ECU and solder it onto the EEPROM board for
ịgụ akwụkwọ.

3. How to Read & Write MCUs:

Utilize the BOOT method for MCU chip data manipulation. Connect
to a PC for this operation.

4. Modul Mgbasawanye:

X2Prog supports additional expansion modules for extra functions
like BENCH programming and transponder coding. Connect these
modules to X2Prog using the expansion ports or the DB26 port as
achọrọ.

5. Ozi nnabata:

Follow RF Exposure Warning Statements for safe operation.
Maintain a minimum distance of 20cm between the radiator and body
n'oge eji.

Ajụjụ:

Q: Can I use X2Prog with devices running older versions of the
XTool app?

A: X2Prog requires XTool devices with APP version V5.0.0 or
higher for proper functionality.

Q: Is it possible to install multiple expansion modules
simultaneously on X2Prog?

A: Yes, you can install multiple expansion modules on X2Prog at
the same time to enhance its capabilities.

Q: How do I ensure proper connection while using expansion
modules for reading EEPROM?

A: Refer to the diagrams on the app to understand how to connect
to the chip using the expansion modules.

View Fullscreen

Ntuziaka mmalite ngwa ngwa
X2TPU Module Mmemme
Nkwuputa
Biko gụọ akwụkwọ ntuziaka a nke ọma tupu i jiri X2Prog Module Programmer (nke a na-akpọ X2Prog). Shenzhen Xtooltech Intelligent Co., Ltd. (nke a na-akpọ "Xtooltech") anaghị ewere ụgwọ ọ bụla ma ọ bụrụ na ejiri ngwaahịa ahụ eme ihe n'ụzọ na-ezighị ezi. Foto ndị egosiri ebe a bụ maka naanị akwụkwọ ntuziaka onye ọrụ a nwere ike ịgbanwe na-enweghị ọkwa mbụ.
Nkọwa ngwaahịa
X2Prog bụ Module Programmer nke nwere ike ịgụ, dee na gbanwee data mgbawa EEPROM na MCU site na usoro BOOT. Ngwaọrụ a dabara adaba maka ndị na-emegharị ụgbọ ala ma ọ bụ ndị na-arụ ọrụ, nke na-enye ọrụ dị ka cloning modul, mgbanwe ma ọ bụ nnọchi maka ECU, BCM, BMS, dashboards ma ọ bụ modul ndị ọzọ. X2Prog nwekwara ike na modul mgbasawanye ndị ọzọ nke Xtooltech na-enye, na-eme ka ọrụ ndị ọzọ dị ka mmemme BENCH, transponder codeing na ọtụtụ ndị ọzọ.
Ngwaahịa View
1
2
3 4
7
5 6
Port DB26: Jiri ọdụ ụgbọ mmiri a jikọọ na eriri ma ọ bụ eriri wiring. Ihe ngosi: 5V (Red / Le): A ga-agbanye ọkụ mgbe X2Prog na-enweta ntinye ike 5V. Nkwukọrịta (Green / Middle): Ìhè a ga-enwu mgbe ngwaọrụ na-ekwurịta okwu. 12V (Red / Right): A ga-agbanye ọkụ mgbe X2Prog nwetara ntinye ike 12V. Ọdụ ụgbọ mmiri Mgbasawanye: Jiri ọdụ ụgbọ mmiri ndị a jikọọ na modul mgbasawanye ndị ọzọ. 12V DC Port Port: Jikọọ na 12V ike ọkọnọ mgbe ọ dị mkpa. Ọdụ ụgbọ mmiri Ụdị-C: Jiri ọdụ ụgbọ USB jikọọ na ngwaọrụ XTool ma ọ bụ PC. Mpempe aha: Gosi ozi ngwaahịa.
Achọrọ ngwaọrụ
Ngwaọrụ XTool: ụdị APP V5.0.0 ma ọ bụ karịa; PC: Windows 7 ma ọ bụ karịa, 2GB Ram

Njikọ ngwaọrụ

(Jikọọ na ngwaọrụ XTool)
Mgbasawanye & Njikọ eriri

Mgbasawanye A

Mgbasawanye B

Igwe USB C
Otu esi agụ na dee EEPROM
Site na bọọdụ EEPROM

* EEPROM Board na-abịa na ngwugwu ọkọlọtọ X2Prog. Mgbe ị na-agụ EEPROM na usoro a, a ga-ewepụ mgbawa ahụ na ECU ma chọọ ka a na-ere ya na bọọdụ EEPROM.
Otu esi agụ na dee MCU
buut
ECU

(Jikọọ na PC)
A na-emegharị X2Prog na modul mgbasawanye ma ọ bụ eriri dị iche iche maka ọrụ ndị ọzọ. A na-achọ modul dị iche iche na ọnọdụ dị iche iche. Iji wụnye modul mgbasawanye, jikọọ modul ozugbo na X2Prog site na iji ọdụ ụgbọ mmiri mgbasawanye (32/48PIN) ma ọ bụ ọdụ ụgbọ mmiri DB26. Enwere ike itinye modul mgbasawanye ọtụtụ na X2Prog n'otu oge. Mgbe ị na-arụ ọrụ, lelee ngwaọrụ ma hụ ụdị modul dị mkpa.
Site na modul mgbasawanye ndị ọzọ
Mgbasawanye
Enwere ụzọ ndị ọzọ iji gụọ EEPROM site na iji modul mgbasawanye. Biko lelee eserese dị na ngwa ahụ wee hụ ka ị ga-esi jikọọ na mgbawa ahụ.
BENCH
Mgbasawanye

Ozi nnabata
FCC nnabata FCC ID: 2AW3IM603 Ngwaọrụ a na-akwado akụkụ 15 nke iwu FCC. Arụ ọrụ dị n'okpuru ọnọdụ abụọ ndị a: 1) Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ emerụ 2) Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị. Mgbanwe ịdọ aka ná ntị ma ọ bụ mgbanwe ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ọrụ ahụ. Rịba ama ka anwalela ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ Klas B, dịka akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a nwere ike iwepụta, jiri na kpalite ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:
· Megharịa ma ọ bụ bugharịa antenna nnata. · Mee ka nkewa dị n'etiti akụrụngwa na onye nnata. · Jikọọ akụrụngwa na oghere dị na sekit dị iche na nke ejikọrọ onye nnata. Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.
Nkwupụta ịdọ aka na ntị RF Exposure: Ngwa a na-akwado oke mkpughe radieshon FCC ewepụtara maka gburugburu enweghị njikwa. A ga-arụnye akụrụngwa a ma rụọ ọrụ ya na anya kacha nta 20cm n'etiti radiator & ahụ.
Aha ụlọ ọrụ nwere aha: TianHeng Consulting, LLC Adreesị: 392 Andover Street, Wilmington, MA 01887, United States E-mail: tianhengconsulting@gmail.com
ISED Statement IC: 29441-M603 PMN: M603, X2TPU HVIN: M603 English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES (B) / NMB (B). French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés de licence d’Innovation, Sciences et Développement économique Canada. L’exploitation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d’interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l’appareil. This device meets the exemption from the routine evaluation limits in section 6.6 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme à l’exemption des limites d’évaluation courante dans la section 6.6 du cnr – 102 et conformité avec rss 102 de l’exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l’ exposition aux champs rf et la conformité. Ngwa a na-akwado oke mkpughe radieshon Canada nke edobere maka gburugburu ebe anaghị achịkwa ya. Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies pour un environnement non contrôlé.
Ngwa a na-akwado oke mkpughe IC nke edobere maka gburugburu ebe anaghị achịkwa ya. Ngwa a ga-arụnye ma rụọ ọrụ ya na opekempe 20cm n'etiti radiator & ahụ. Cet équipement est conforme aux limites d'exposition IC définies pour un environnement non contrôlé. Ọ bụrụ na e jiri ya mee ihe, a na-eji ya eme ihe dị ka 20cm n'ogologo na radiateur et la carrosserie.
Nkwuwapụta nke nkwekọ nke CE N'ebe a, Shenzhen XTooltech Intelligent Co., Ltd na-ekwupụta na onye mmemme Module a kwekọrọ n'ihe ndị dị mkpa achọrọ na usoro ndị ọzọ dị mkpa nke Ntuziaka 2014/53/EU. Dabere na Nkeji edemede 10(2) na Nkeji edemede 10(10), ngwaahịa a kwere ka ejiri ya na mba ndị otu EU niile.
UKCA N'ihi nke a, Shenzhen XTooltech Intelligent Co., Ltd na-ekwupụta na Module Programmer na-eju afọ ụkpụrụ teknụzụ niile dị na ngwaahịa ahụ n'ime oke nke UK Redio Equipment Regulations (SI 2017/1206); Ụkpụrụ eletriki eletriki (Nchekwa) UK (SI 2016/1101); na UK Electromagnetic Regulations Compatibility (SI 2016/1091) wee kwuwapụta na etinyeghị otu ngwa ahụ n'aka ụlọ ọrụ UK kwadoro.

ECU

Mgbe ị na-agụ MCU na usoro a, eriri wiring kwesịrị ịbụ
A na-ere ya na bọọdụ ECU dị ka eserese wiring, yana ike 12V kwesịrị ijikọ na X2Prog.

Mgbe ị na-agụ MCU na usoro a, a ga-etinye eriri wiring n'ọdụ ụgbọ mmiri ECU dị ka eserese wiring si dị, yana ike 12V kwesịrị ijikọ na X2Prog.

Kpọtụrụ anyị

Ọrụ ndị ahịa: supporting@xtooltech.com Official WebWeebụsaịtị: https://www.xtooltech.com/

Adreesị: 17&18/F, A2 Building, Creative City, Liuxian Avenue, Nanshan District, Shenzhen, China Corporate & Business: marketing@xtooltech.com © Shenzhen Xtooltech Intelligent Co., Ltd. Copyright, Ikike niile echekwabara

Akwụkwọ / akụrụngwa

XTOOL X2TPU Module Programmer [pdf] Ntuziaka onye ọrụ
M603, 2AW3IM603, X2TPU Module Programmer, X2TPU, Programmer, X2TPU Programmer, Module Programmer

Ntụaka

Akwụkwọ ntuziaka onye ọrụ