VIMAR 01489 Smart Automation By-Me Plus

Ntuziaka

Ngwa njikwa akpaaka ụlọ nwere bọtịnụ ntinye anọ, 1 0/1-10 V SELV mmepụta, 1 NO kọntaktị relay mmepụta 2A 120-240 V ~ 50/60 Hz maka ballast na LED ọkwọ ụgbọ ala, na-ahụ n'ọchịchịrị na RGB LEDs na ike mgbanwe, a ga-emecha ya na okpu bọtịnụ ọkara nwere ike ịgbanwe nke nwere modul 1 ma ọ bụ 2 Linea, Eikon, Arkè ma ọ bụ Plana – modul 2.
Ngwaọrụ ahụ nwere bọtịnụ ntinye onwe ya nke nwekwara ike ịhazi dị ka bọtịnụ rocker, 0 / 1-10 V SELV proportional actuator maka ballast na onye ọkwọ ụgbọ ala LED (nrịgharị ahụ na-ebipụ ibu), 0/1-10 V SELV njikwa ihu igwe nha nha. relay for motorized proportal valves (nfefe anaghị ebipụ ibu), RGB LED nwere agba nhazi, maka ịtọ na njikwa ọrụ na By-me home automation systems. Ihe mmepụta 0/1-10 V bụ nke galvanically dịpụrụ adịpụ (ihe mkpuchi okpukpu abụọ ma ọ bụ ihe mkpuchi siri ike) site na isi ọkụ ọkụ yana site na BUS. Maka usoro Linea, Eikon na Arkè, mkpuchi bọtịnụ niile, ma sitere na katalọgụ ma ọ bụ ahaziri, nwere akara nke enwere ike iji agba RGB nwere ike ịhazi ya.

Atụmatụ

• Ọnụọgụ ọkọnọ voltage: 29V ụgbọ ala
• Ntinye site na bọs: 25mA
• Anya n'etiti 0/1-10 V mmepụta na ibu: max 50 m na eriri gbagọrọ agbagọ
• Ọnụ:
  • ụgbọ ala TP,
  • kọntaktsị agbagharị (C, NO)
  • 0/1-10 V njikwa SELV
  • 0/1-10 V SELV kacha mmepụta ugbu a:
  • 30 mA absorption (ibu na 0/1-10 V SELV interface na-arụ ọrụ)
  • 10 mA nnyefe (ibu na 0/1-10 V SELV interface passive)
• 0/1-10 V SELV echekwabara oke ibu
• 4 pịa bọtịnụ nke nwekwara ike hazie dị ka bọtịnụ rocker
• 4 RGB LED nwere agba nhazi
• Ikanam uhie na bọtịnụ ntinye nhazi
• Okpomọkụ na-arụ ọrụ: -5 °C ÷ + 45 °C (iji ime ụlọ)
• Ogo nchekwa: IP20
• Ekwesịrị ịhazi ngwaọrụ 30489-01489 na ọnụ ụzọ Automation 01410-01411 na ngwa. View Pro.
• Ekwekọrịtaghị na ogwe njikwa By-me 21509 na EasyTool Professional.

ỌRỊA NA-ejikwa

• Mwepụta nnyefe (120 - 240 V ~ ibu a na-achịkwa ya, enweghị kọntaktị):
  • ballast na 2 A LED ọkwọ ụgbọala (5,000 okirikiri)
• 0/1-10 V mmepụta SELV:
  • ballast na onye ọkwọ ụgbọ ala LED nwere ntinye 0/1-10 V SELV
  • valvụ nha nha moto nwere ntinye 0/1-10 V SELV

Nkwụnye&Kpọọ

kpachara anya: Ụdị nkwụnye & egwuregwu chọrọ ka sistemụ ahụ tinye naanị ngwa plọg&egwu ọ bụghị ngwaọrụ ahaziri na sistemụ By-me Plus.
Maka ịrụ ọrụ na ọnọdụ Plug&Play, wụnye naanị okpu bọtịnụ ọkara 1-modul na ngwaọrụ ahụ.
Na enweghị nhazi, a na-ahazi ngwaọrụ ahụ ka ọ bụrụ 0/1-10V proport-tional actuator:

• obere oge pịa B iji mee ka onye na-arụ ọrụ relay nke ngwaọrụ ahụ rụọ ọrụ;
• pịa B maka ogologo oge iji mee mgbanwe n'elu (mmụba);
• obere oge pịa C ka gbanyụọ onye na-emegharị ngwaọrụ ahụ;
• pịa C maka ogologo oge iji mee mgbanwe na ala (mbelata);
• pịa F ka izipu ọnọdụ "Ọkụkụ ọkụ" n'elu ụgbọ ala;
• pịa E ka izipu ọnọdụ "Ọkụ ọkụ na ihe mkpuchi mkpuchi ala" n'elu ụgbọ ala.
  Mgbe ịpịrị bọtịnụ ntinye, LED na-agbanye maka 3 s.

Ịtọlite ​​agba nke LEDS

Ụdị nkwụnye & PLAY.

• Usoro ịgbalite: n'otu oge pịa bọtịnụ ntinye E na F maka ogologo oge; LEDs niile ga-enwu na agba edobere ugbu a.
• Nhọrọ agba: obere oge pịa bọtịnụ push E ma ọ bụ F ka view agba na-esote.
• Ịchekwa agba na ịpụ usoro: pịa bọtịnụ bọtịnụ F ma ọ bụ E ruo ogologo oge.
• Wepụ usoro ahụ na-echekwaghị agba: akpaka ka oge gwụchara nke 5 s.

Site-me Plus SYSTEM. 

• A na-edozi agba ahụ site na ngwa site na iji nchịkọta nhọrọ dị iche iche.

Ọrụ

Ngwa akpaaka ụlọ na-arụ ọrụ dị ka onye na-arụ ọrụ nha nhata.

• Ọrụ enwere ike:
  • Mbelata njikwa / mmezi nke ballast na onye ọkwọ ụgbọ ala LED nwere njikwa njikwa 0 / 1-10 V SELV (enwere ike ibipụ ibu ahụ site na agba agba agba).
  • valvụ nha nha na-arụ ọrụ na 0/1-10 V SELV njikwa njikwa maka sistemụ njikwa okpomọkụ (enweghị ike ibipụ ibu ahụ site na agba agba agba).

N'oge agba agba agba agba agba agbanyụrụ ọkwa. Ọkwa na-esote na-adịgasị iche dabere na oke nhazi nhazi.

Nhazi

Maka ịrụ ọrụ nhazi, hụ ntuziaka sistemụ By-me Plus.

• Nkeji arụ ọrụ: 7
  • Otu bọtịnụ arụ ọrụ bọtịnụ elu akaekpe
  • Akụkụ arụ ọrụ bọtịnụ mgbada aka ekpe
  • Otu bọtịnụ arụ ọrụ n'elu aka nri
  • Ngwunye bọtịnụ arụ ọrụ n'ala nri
  • Ngalaba na-arụ ọrụ bọtịnụ rocker
  • Ngalaba na-arụ ọrụ bọtịnụ rocker akanri
  • Nkeji na-arụ ọrụ na-arụ ọrụ nke ọma

Iwu ntinye

• Ọ bụrụ na ejikọrọ valvụ moto, ndị a ga-abụrịrị klas III ma nwee akara ngosi.
• Ọ bụrụ na ejikọtara ballasts ma ọ bụ ndị ọkwọ ụgbọ ala LED, ndị a nwere ike ịbụ klas I ma ọ bụ klaasị II nwere mmepụta 0/1-10V SELV.
• Ihe ntanetị 0 / 1-10 V nke ibu ndị a na-achịkwa ga-adịpụrụ adịpụ site na ọkụ ọkụ site na mkpuchi okpukpu abụọ ma ọ bụ site na mkpuchi siri ike.
• Ndị ruru eru ga-arụrịrị nrụnye na nrubeisi n'usoro iwu ugbu a gbasara ntinye ngwa eletrik na mba ebe etinyere ngwaahịa.
• A ga-echebekwa sekit nrụpụta ike relay ka ọ ghara ibufe ibu site na ịwụnye ngwaọrụ, fuse ma ọ bụ mgba ọkụ ụzọ 1 akpaka, yana akara ugbu a na-agaghị agafe 10 A.
• Nwụnye n'ime igbe nkwụnye ọkụ. N'ihe omume ntinye na ngalaba njikwa, jiri nka ngwa ngwa yiri ya. V51922.
• Ọ bụrụ na ejiri ngwaọrụ a maka ebumnuche ndị ọzọ na-abụghị nke ndị nrụpụta kwuru, enwere ike imebi nchedo enyere.
• Lelee kacha ugbu a na voltage ụkpụrụ nyere maka ngwaọrụ.

Nkwekọrịta iwu.
Ntuziaka LV. Ntuziaka EMC. Ntuziaka RoHS.
Ụkpụrụ EN IEC 60669-2-1, EN IEC 63044, EN 50491, EN IEC 63000.
REACH (EU) Regulation No. 1907/2006 - Art.33. Ngwaahịa ahụ nwere ike ịnwe akara ndu.

WEEE - Ozi onye ọrụ
Akara akara gafere na ngwa ma ọ bụ na nkwakọ ngwaahịa ya na-egosi na ngwaahịa ahụ na njedebe nke ndụ ya ga-anakọta ya iche na ihe mkpofu ndị ọzọ. Ya mere, onye ọrụ ga-enyefe akụrụngwa na njedebe nke ndụ ya n'aka ụlọ ọrụ ime obodo kwesịrị ekwesị maka nchịkọta dị iche iche nke ihe mkpofu ọkụ na eletrik. Dị ka ihe ọzọ na njikwa onwe onye, ​​​​ị nwere ike ibuga akụrụngwa ịchọrọ ịtụfu n'efu na onye nkesa mgbe ịzụrụ.asing a new appliance of an equivalent type. You can also deliver electronic products to be disposed of that are smaller than 25 cm for free, with no obligation to purchase, to electronics distributors with a sales area of at least 400 m2. Proper sorted waste collection for subsequent recycling, processing and environmen-tally conscious disposal of the old equipment helps to prevent any possible negative impact on the environment and human health while promoting the practice of reusing and/or recycling materials used in manufacture.

N'ihu na azụ VIEW

• A: bọtịnụ ntinye nhazi
• B. Pịa bọtịnụ 1
• C. Pịa bọtịnụ 2
• D. LED
• E: Pịa bọtịnụ 3
• F: Pịa bọtịnụ 4

Njikọ

1. Njikọ na valvụ nha nhata nke moto
   
2. Njikọ na ballast ma ọ bụ onye ọkwọ ụgbọ ala LED

Ebe dị anya n'etiti actuator na valvụ: 50 m. Jiri eriri gbagọrọ agbagọ nwere akụkụ obe kacha nta nke 0.5 mm2 (art. 01840).

Viale Vicenza, 14
36063 Marostica VI - Ịtali
www.vimar.com

Akwụkwọ / akụrụngwa

VIMAR 01489 Smart Automation By-Me Plus [pdf] Akwụkwọ ntuziaka onye ọrụ 30489, 01489, 01489 Smart Automation By-Me Plus, 01489, Smart Automation By-Me Plus, Automation By-Me Plus, By-M Plus, Plus

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ