Gụọ ma ghọta akwụkwọ ntuziaka a na akara nchekwa niile tupu i jiri ngwa a. Debe akwụkwọ ntuziaka a maka ntụnye aka n'ọdịnihu.
Nkọwa
4-channel push button interface
OJI NA Nhazi
Ntụgharị bọtịnụ maka ijikọ ruo bọtịnụ ntinye 4 (ya na ọkụ nzaghachi nhọrọ) na sistemụ akpaaka ụlọ Velbus. Hazie site na iji ngwanrọ nhazi Velbus VelbusLink. (Lee ntuziaka nwụnye na www.velbus.eu.)
Enwere ike ijikọ abụọ LEDs nwere anode nkịtị yana nwere cathode nkịtị (nke a na-ahazi na VelbusLink). Njikọ nke njikọ LED (nhọrọ): lee fig. 2.Advanced: VMB4PB nwere ike iji dị ka modul I / O, nke LED mmepụta nwere ike jikọọ na njikwa njikwa nke usoro ọzọ (na-atụle nkọwa ndị akọwapụtara n'okpuru). Iji mee nke a, hazie VMB4PB dị ka modul I/O na VelbusLink, ma kenye omume na ọwa mmepụta.
Ọkwa ọkụ ọkụ:
- PS LED: ike voltage chọpụtara
- Rx LED: CAN ngwugwu ụgbọ ala enwetara
- Tx LED: Enwere ike izipu ngwugwu ụgbọ ala
Nkọwapụta nka nka nkenke
- Ọkụ ọkụ: 15 ± 3 VDC
- Oke. oriri ugbu a 50mA
- Akụkụ: 36 x 38 x 16 mm (L x W x D)
- Ogo nchekwa: IP10
Mpụta LED:
- max. mmepụta voltage 15 VDC, dabara maka LEDs ruo 24V (AC ma ọ bụ DC)
- arụnyere usoro resistor: 1.5k Ω
- max. mmepụta ugbu a: 10 mA @ 15V
Maka ndepụta zuru ezu nwere nkọwa nka, biko rụtụ aka na ibe ngwaahịa na www.velbus.eu.
NKWUKWỌ njikọ
- A. Njikọ nke bọtịnụ ntinye na-enweghị LED
Lee fig. 1
- B. Njikọ nke LED njikọ (dị mkpa naanị maka push bọtịnụ na LEDs)
Lee fig. 2
- C. Njikọ nke bọtịnụ ntinye na LEDs na anode nkịtị
Lee fig. 3
- D. Njikọ nke bọtịnụ push na LEDs na cathode nkịtị
Lee fig. 4
Ngwaahịa a na-akwado ụkpụrụ na ụkpụrụ European niile dị mkpa.
Velbus – Legen Heirweg 33, BE-9890 Gavere, Belgium – tel. +32 9 384 36 11 - e-mail: info@velbus.eu - www.velbus.eu
Akwụkwọ / akụrụngwa
 |
velbus VMB4PB 4-Channel Push Interface [pdf] Akwụkwọ ntuziaka VMB4PB, 4-Channel Push Interface |
