Ntuziaka onye ọrụ Unitron TrueFit

Automatic REM automates the process of incorporating Real Ear Measurements (REM) into the fitting process. The solution provides seamless, step by step workflows that guide the user through the various steps of Real Ear Measurements and matching to targets from within the Unitron TrueFit™ fitting software. This creates an easy and effective way of incorporating Real Ear Measurement into the fitting process.
The fitting software will automatically identify the correct workflow based on the measurement system installed. For additional details on the REM systems supported, programming and fitting Unitron hearing instruments, please refer to the Unitron TrueFit user guide.

Usoro ọrụ REM akpaaka

Automatic REM can be accessed via the Fitting tab. It is accessible within Unitron TrueFit™ fitting software when running Noah and connected to a compatible system. If there are Automatic REM results from a previous session, they will be visible regardless of connection status.

Enwere ike ịgba ọsọ na-arụ ọrụ maka aka ekpe ma ọ bụ aka nri ma ọ bụ ntị abụọ. Pịa R / Malite ma / L ka ịmalite REM akpaaka.

Nkwadebe - nhazi
Ka ị na-agba ọsọ REM akpaaka na nke mbụ, naanị nhọrọ bụ ịhọrọ Tụta ezigbo data ntị ọhụrụ. Akụrụngwa ga-eduzi gị site na usoro iji dozie tube nyocha, tụọ REUG, Acoustic Coupling, REOG, na MLE (Mmetụta Ebe Igwe Igwe). Maka nnọkọ nsonye na Automatic REM, ị nwere nhọrọ ịmegharị nha maka otu ma ọ bụ ntị abụọ. Họrọ Jigharịa ezigbo data ntị gara aga wee bụrụ otu n'ime nhọrọ abụọ ndị a:

Megharia nha REUG ma mee usoro ọrụ site na njikọta ụda na REOG

Jigharịa nha niile iji megharịa naanị akụkụ egwuregwu akpaka nke usoro ọrụ ahụ

Mara: Ọ bụrụ na a na-agba ọsọ REM akpaaka mgbe njikwa ngbanwe akpaaka erubeghị na 100%, pasent ahụtage ga-edozi na 100% maka ogologo oge nke ọrụ REM Automatic. Na mgbakwunye, a ga-edobe ụkpụrụ nhazi ngwa ka ọ bụrụ efu maka ogologo oge nke usoro ọrụ ahụ. A ga-eweghachi ha abụọ n'ụkpụrụ mbụ ha ma emechaa usoro ọrụ ahụ.

Nkwadebe - nyocha tube calibration

Soro ntuziaka na ihuenyo ka ịhazigharị tubes nyocha. Pịa nso ka gaba n'ihu.

Mgbanwe nke REUG

Soro ntuziaka nkwadebe REUG na ihuenyo wee pịa R Start / L Malite ịmalite nha REUG.

Debe ọnụ nchọcha nso na ntị ntị wee pịa Malite.
When the results of the REUG measurement are displayed, a green check mark indicates that the measurements were completed successfully.
If there were any issues encountered with the measurements, a warning icon will be shown with a brief status message. The user then has the option to repeat the measurement if needed.

Ezigbo Ntị: njikọta ụda, REOG, na MLE

Soro ntuziaka nkwadebe:

Mara: Biko gbaa mbọ hụ na ọnọdụ tube nyocha anaghị agbanwe mgbe ị na-etinye ngwaọrụ ntị.
Pịa Measure ka ịrụ njikọ ụda olu, REOG, na MLE.
Na nchịkọta nke nsonaazụ ya, ngosipụta ọkwa n'atụghị egwu nwere ịdọ aka ná ntị ma ọ bụ akara mperi na-egosi otu okwu mere n'oge otu ma ọ bụ karịa n' nha yana akara ngosi yiri ya n'akụkụ ntu ahụ akọwapụtara na-egosi ma ọ metụtara. Akara nleba anya akwụkwọ ndụ akwụkwọ ndụ na-egosi na nha ndị a mechara nke ọma.

N'ọnọdụ dị n'elu, nha REOG na MLE gwụchara nke ọma, mana oke mkpọtụ gburugburu emetụtara nha njikọta ụda. Ịpị na bọtịnụ Nkọwa ga-enye nkọwa ndị ọzọ na ndụmọdụ.

Tụọ ma dakọọ ebumnuche

Họrọ mmemme nke ga-arụ ọrụ n'oge nkwenye.

Tọọ ọkwa kachasị elu na earardrum ebe a ga-akwụsị nha.

Pịa Measure ka itinye ozi ụda na-akpaghị aka (ya bụ REUG, njikọ ụda olu, na REOG), mee nha nzaghachi enyemaka, gbanwee mmepụta akụrụngwa ịnụ ka ọ dabara na ebumnuche wee nweta nzaghachi ngwa ntị.

N'elu example, the green check marks indicate that all measurements completed successfully. If any one or more of the measurements encounter an issue, an appropriate warning/error icon and status message will be displayed. Select Details for each of the measurements to see an explanation of the results.

Emecha REM akpaaka

Pịa Chekwa ka itinye mgbanwe na dabara adaba wee chekwaa nha niile n'ime oge dị ugbu a na sọftụwia dabara adaba Unitron TrueFit yana nhọrọ ịgbakwunye ndetu.
Ozugbo echekwara, ị nwere ike view nsonaazụ maka REUG, REOG, njikọta ụda na nha enyemaka na ihuenyo Fitting> Akpaaka REM.

Mara: A na-egosipụtakwa nha REUG na ihuenyo Client> REUG.

Usoro ọrụ REM 2 akpaaka

Enwere ike ịnweta REM 2 akpaaka site na taabụ Fitting. A na-enweta ya n'ime sọftụwia dabara adaba na Unitron TrueFit mgbe ọ na-agba Noa ma jikọọ ya na sistemụ dakọtara. Ọ bụrụ na enwere nsonaazụ REM 2 akpaaka sitere na nnọkọ gara aga, a ga-ahụ ha n'agbanyeghị ọkwa njikọ.Enwere ike ịgba ọsọ na-arụ ọrụ maka aka ekpe ma ọ bụ aka nri ma ọ bụ ntị abụọ. Pịa R / Malite ma / L ka ịmalite REM 2 akpaaka.

Nkwadebe

Họrọ usoro dabara adaba ma họrọ usoro REM a na-eji. Ọ bụrụ na ịmalite usoro ọrụ n'ime oge ọzụzụ, 'Ngwaọrụ Ọzụzụ' ga-edepụta n'okpuru usoro REM, dị ka e sere n'okpuru. nhazi nhazi
Soro ntuziaka na ihuenyo ka ịhazigharị tubes nyocha ma ọ bụ họrọ Kwuo ka ịkwaga nzọụkwụ ọzọ.

Lelee nsonaazụ mmezi wee kwugharịa ma ọ dị mkpa. Enwere ike ịmegharị nha ugboro abụọ, ma ọ bụ n'otu akụkụ dịka achọrọ.

Enyereghị ya aka
Nke a bụ nha REUG. Soro ntuziaka nkwadebe na ihuenyo wee pịa R / Malite ma / L ka ịmalite nha ma ọ bụ họrọ Kwuo ka ịkwaga nzọụkwụ ọzọ.

When the results of the REUG measurement are displayed, a green check mark indicates that the measurements were completed successfully.
If there were any issues encountered with the measurements, a warning icon will be shown with a brief status message. The user then has the option to repeat the measurement if needed. Enyere aka
Soro ntuziaka nkwadebe na ihuenyo. Họrọ ọkwa ntinye achọrọ (65 dB bụ iwu), wee pịa Malite ka ịmalite nha.

Mara: Biko gbaa mbọ hụ na ọnọdụ tube nyocha anaghị agbanwe mgbe ị na-etinye akụrụngwa anụ ihe.
A ga-atụle mkpọtụ gburugburu, njikọta ụda, REOG na MLE n'oge usoro a, tupu ịmalite na-akpaghị aka ka ọ dabara na ebumnuche.
Mgbe emechara nha, a ga-egosipụta nsonaazụ maka review. Enwere ike ikwugharị nha ahụ maka ọkwa ntinye ọ bụla ma ọ bụ niile sitere na ihuenyo a.

Kwenye
The Automatic Adaptation Manager will be set to 100% upon completion of the workflow. Should adjustments to the Automatic Adaptation Manager be required, navigate to Fitting > Tuning.

Chekwa
Nzọụkwụ ikpeazụ na-egosi nchịkọta nke nha, ihe na-echetara na ọkwa uru ka edobere 100%, yana nhọrọ ịhapụ ndetu na nnọkọ ahụ. Pịa Chekwa na Wepụ ka mezue usoro ọrụ.

Ozugbo echekwara, ị nwere ike view nsonaazụ maka REUG, REOG, Acoustic Coupling na Aided Measurements na Fitting> Akpaaka REM 2 ihuenyo.

Mara: A na-egosipụtakwa nha REUG na ihuenyo Client> REUG.

Nkọwa okwu

Acoustic njikọ – ihe a na-eme iji mara mmetụta ụda nke njikọta anụ ahụ nke ngwa ntị na ntị onye ahịa. A makwaara nke a dị ka ọdịiche ọkwa ntị na-ejikọta ọnụ (ECLD).
Ntụnye aka - Ezigbo Ntị (REM) emere na ngwa ntị etinyere na ntị ndị ahịa wee gbanye.
Automatic REM and Automatic REM 2 – automated system for REM that provides users with a seamless, step by step workflow that incorporates Real Ear Measurements into the fitting process, directly in Unitron TrueFit fitting software.

MLE – Mmetụta Ebe igwe okwu
REOG - uru enwetara ezigbo ntị
REUG - ezigbo ntị na-enwetaghị enyemaka

Usoro chọrọ

For details on system requirements and supported Automatic REM systems, please refer to the Unitron TrueFit user guide or navigate to www.unitron.com/truefit-compatibility

Akwụkwọ / akụrụngwa

Unitron TrueFit Software [pdf] Ntuziaka onye ọrụ
TrueFit Software, TrueFit, Software

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Unitron TrueFit Software

Okwu mmalite