UBiBOT WS1 Wifi Temperature Sensor
Ntuziaka onye ọrụ
Okwu Mmalite ngwaahịa
The sensor, with its stable performance and high sensitivity, is an important tool for observing and studying the occurrence, evolution and improvement of saline soils and water-salt dynamics. Measurement of the dielectric constant of the soil provides a direct and stable reflection of the true water content of various soils, as well as a measurement of the volume percentage of soil moisture.
Jiri Ọnọdụ Ọnọdụ
The sensor is suitable for soil moisture monitoring, scientific experiments, water-saving irrigation, greenhouses, flowers and vegetables, meadows and pastures, rapid soil measurement, plant cultivation, wastewater treatment, fine agriculture and other occasions.
Atụmatụ
- Soil water content, conductivity and temperature in one.
- Completely sealed, acid and alkali corrosion resistant, can be buried in the soil or directly into the water for long-term dynamic detection.
- High precision, fast response, good interchangeability, probe insertion design ensures accurate measurement and reliable performance.
Nkọwapụta ngwaahịa
| Nkọwapụta | |
| Nlereanya | UB-SEC-N1 |
| Ịnye ọkụ | DC 4.5 ~ 30V |
| Max Ugbu a | 110mA (@5V) |
|
Oke nso |
EC: 0~20000μS/cm Temperature: -40~80℃ Humidity: 0~100% |
|
Izi ezi |
EC: ±3%FS (0~10000μS/cm), ±5%FS (10000~20000μS/cm)
Okpomọkụ: ± 0.5 ℃ Humidity: ±2% (@0~50%, palm soil+30%+25℃) ; ±3% (@50~100%, palm soil+60%+25℃) |
|
Mkpebi |
EC: 1μS/cm Temperature: 0.1℃
Iru mmiri: 0.1% |
| Ọkwa nchedo | IP68 |
| Njikọ | Audio |
| Ogologo eriri USB | 3m |
| Protocol nzikọrịta ozi | RS485 Modbus RTU Protocol |
| RS485 adreesị | 0XD6 |
| Ọnụego Baud | 1200 bit/s, 2400 bit/s, 4800 bit/s (ndabere), 9600 bit/s, 19200 bit/s |
Ntuziaka wiring
Mpaghara Ihe
Measurement area: Inside a 5cm diameter cylinder of equal height to the probes, centred on the centre of the two probes.
Quick Test Method
Select a suitable measurement site, avoid rocks and ensure that the steel needle does not touch hard objects. Throw away the top layer of soil according to the required measuring depth, keep the original tightness of the soil underneath, and insert the sensor vertically into the soil by holding it tightly. Do not shake the sensor from side to side when inserting it. It is recommended to take several measurements within a small area of one measurement point to find the average value.
Ụzọ ntinye n'ime ala
Gwuo olulu kwụ ọtọ nke nwere dayameta nke>20cm. Fanye ntụtụ ihe mmetụta kwụ n'ahịrị n'ime mgbidi olulu ahụ na omimi nke etinyere ma jupụta olulu ahụ nke ọma. Mgbe oge nkwụsi ike gasịrị, enwere ike ịme nha na ndekọ n'ime ụbọchị, ọnwa ma ọ bụ karịa.
Usoro nzikọrịta ozi
- Nkwurịta okwu bụ isi parameters
Nkwukọrịta Basic Parameter Sistemụ koodu 8-bit ọnụọgụ abụọ Bit data 8 ibeji Nleba anya nha anya Bit onweghi Kwụsị Bit 1 bit Itule mperi Lelee CRC Ọnụego Baud 1200 bit/s, 2400 bit/s, 4800 bit/s (ndabere), 9600 bit/s, 19200 bit/s - Ọdịmma Frame Data
A na-eji ụkpụrụ nkwukọrịta Modbus-RTU n'ụdị a:- Nhazi mmalite ≥ 4 bytes n'ime oge.
- Address code: 1 byte, default 0xE1.
- Koodu ọrụ: 1 byte, koodu ọrụ nkwado 0x03 (naanị ọgụgụ) na 0x06 (gụọ / dee).
- Ebe data: N bytes, data 16-bit, nnukwu byte na-abịa na mbụ.
- Lelee mperi: koodu CRC 16-bit.
- Nhazi ngwụcha ≥ 4 bytes nke oge.
Arịrịọ Adreesị Ohu Koodu ọrụ Adreesị ndebanye aha Nọmba nke ndekọ CRC LSB CRC MSB 1 byte 1 byte 2 bytes 2 bytes 1 byte 1 byte Nzaghachi Adreesị Ohu Koodu ọrụ Nọmba nke Bytes 1 1 … Ọdịnaya n CRC 1 byte 1 byte 1 byte 2 bytes 2 bytes … 2 bytes 2 bytes
- Adreesị ndebanye aha
Adreesị ndebanye aha Adreesị Ọdịnaya Ogologo Ndebanye aha Koodu ọrụ Nkọwa nkọwa 0x0000 iru mmiri 1 03 Data integer na-edebanyeghị aha, kewara site na 10 0x0001 Okpomọkụ 1 03 Signed integer data, divided by 10 0x0002 EC 1 03 Ọnụọgụ 0x07D0 Adreesị 1 03/06 1–255 0x07D1 Ọnụego Baud 1 03/06 0:2400, 1:4800, 2:9600
IHE
- The probe must be fully inserted into the soil when measuring.
- Pay attention to the lightning protection when using in the field.
- Do not violently bend the probe, do not pull the sensor lead wire, do not drop or hit the sensor violently.
Ajụjụ a na-ajụkarị
Q: How deep should the sensor be inserted into the soil for accurate measurements?
A: The sensor should be fully inserted into the soil for accurate measurements.
Ajụjụ: Enwere ike iji ihe mmetụta na gburugburu n'èzí?
A: Yes, the sensor can be used in outdoor environments. However, it is important to pay attention to lightning protection when using it in the field.
Ajụjụ: Gịnị bụ nkwurịta okwu protocol nke ihe mmetụta na-eji?
A: Ihe mmetụta na-eji RS485 Modbus RTU Protocol maka nzikọrịta ozi.
Akwụkwọ / akụrụngwa
 |
UBiBOT WS1 Wifi Temperature Sensor [pdf] Ntuziaka onye ọrụ WS1, WS1 Pro, UB-SEC-N1, WS1 Wifi Temperature Sensor, WS1, Wifi Temperature Sensor, Temperature Sensor, Sensor |