SYNCMIC Ai Mini Printer Instruction Manual

SYNCMIC Ai Mini Printer

Okwu mmeghe

Power button: Press and hold for 3 seconds to turn on/off the device.

Bọtịnụ AI:

1. Long press to trigger the generation of a visual effect based on the sound, short press to return to the style mode.
2. Click to switch the style mode.
3. Double-click to print the APP QR code.

Print button: Press briefly after generating the image to start the printing process.
Reset hole: If the device freezes and cannot be powered on, you can use a sharp object to rub it.

APP Download &Device Connection Steps

Budata APP

1. Method 1: Scan the QR code below and follow the on-screen instructions to download the corresponding App;
2. Usoro 2: Chọọ maka “Friend Al” in the official app storeon your mobile device, then download and install the app. IPhone: Open the App Store, search “Friend Al” and  install ;Android: Open your app store or Google Play, search “Friend Al” and install.

((Note: 5G WiFi is not currently supported)

Mepụta ọdịnaya
Hold down the [Ai] key to talk – Create content. After the network is successfully set up, the page displays the words “Press to talk” .At this time, you can press and hold the [Ai] button at the top of the device for a creative experience. For example: “Print a of a little dog running in the field”.Specific operation: press and hold the [Ai] key with out releasing it – speak the command – release the key after the command, and the print will be displayed.

Ederede ịdọ aka ná ntị batrị

1. Biko jiri chaja 5V kwụọ ụgwọ dịka nkọwapụta siri dị ka ịzenarị mmebi nke igwe.
2. Amachibidoro ịkwasa, mmetụta, mkpochapụ ma ọ bụ ọkụ;
3. Ọ bụrụ na mgbawa siri ike emee, aga n'ihu iji;
4. Etinyela na gburugburu okpomọkụ dị elu, batrị ka amachibidoro imikpu ya;
5. Ngbanwe na ụdị batrị na-ezighi ezi nwere ike ịbụ ihe mgbawa, jide n'aka na ị ga-agbaso ntuziaka ka ị tụfuo batrị ejiri.

Ihe ndị chọrọ nlebara anya

1. When charging, please gently insert or unplug the charging cable to prevent excessive force from damaging the port;
2. After charging, please unplug the charging calebin time;
3. To avoid danger, do not use or charge IN environments with hightemperature, high humidity ,excessive smoke and dust, such as: bathrooms, steam rooms, open flames, etc.;
4. Improper charging may cause damage to the printhead;
5. Do not touch the print head to prevent overheating and burns;
6. The tearing blade is sharp, be careful not to touch it.

FCC ọkụ:

Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:

1. Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana
2. Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.

Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ọrụ ahụ.

Rịba ama: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Megharịa ma ọ bụ bugharịa antenna nnata.
• Mee ka nkewa dị n'etiti akụrụngwa na nnata.
• Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata.
• Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.

Ịdọ aka ná ntị RF maka ngwaọrụ mkpanaka:
Atụlela ngwaọrụ a ka o gboo mkpa mkpughe RF izugbe.
Enwere ike iji ngwaọrụ ahụ na ọnọdụ mkpughe na-enweghị mmachi.