ọdịnaya zoo
1 synapse EMB-S2-A Controller
2 Nkọwapụta
3 Ntụle imewe
4 Ihe achọrọ
5 Ntuziaka ntinye
6 NA-ebugo
7 Ịkwalite ihe ndozi na njikwa
8 Ozi iwu na asambodo
9 Akwụkwọ / akụrụngwa
9.1 Ntụaka
10 Ozi ndị metụtara

synapse-LOGO

synapse EMB-S2-A Controller

synapse-EMB-S2-A-njikwa-ngwaahịa

Onye njikwa EMB-S2-A

  • Ngosi ibu: 12 ruo 24VDC, +/- 10%, 700mW max
  • Okpomọkụ arụ ọrụ: -40 ruo +80 C / iru mmiri na-arụ ọrụ: 10 ruo 90%, anaghị ekpo ọkụ

Ịdọ aka ná ntị na ịdọ aka ná ntị:

  • Izere Ọkụ, Ụjọ, ma ọ bụ Ọnwụ: Gbanyụọ Ike n'ọgbanye okirikiri ma ọ bụ fuse wee nwalee ike ahụ agbanyụrụ tupu ịwụnye!
  • NKWUKWU OKWU KWESỊRỊ KA EZINỤRỤ ỌSỤSỤ STOTIC nke nwere ike imebi ndị njikwa n'oge ntinye.

Ịdọ aka ná ntị na ịdọ aka ná ntị:

  • Izere Ọkụ, Ụjọ, ma ọ bụ Ọnwụ: Gbanyụọ Ike n'ọgbanye okirikiri ma ọ bụ fuse wee nwalee ike ahụ agbanyụrụ tupu ịwụnye!
  • NKWUKWU OKWU KWESỊRỊ KA EZINỤRỤ ỌSỤSỤ STOTIC nke nwere ike imebi ndị njikwa n'oge ntinye.

Nkọwapụta

  • Ibu njikwa dim 30 mA Isi iyi/Sink
  • Oge Radio: 2.4GHz (IEEE 802.15.4)
  • Ike Mbupute RF: + 19dBM
  • Okpomọkụ arụ ọrụ: -40 ka +80 C
  • Iru mmiri na-arụ ọrụ: 10 ruo 90%, na-abụghị condensing
  • Ndị ọkwọ ụgbọ ala kacha D4i: Oke na ndị ọkwọ ụgbọ ala 6 D4i LED kacha, ndị ọkwọ ụgbọ ala D4i LED ọ bụla> 4 ga-achọ ndị nrụpụta ike nwere nkwarụ.
  • Ogo waya: 20 AWG, 7" waya, 600V
  • Akụkụ: 3.05" L x 2.21" W x .47" H (77.6 x 56.1 x 11.8 mm)

kpachara anya
EMB-S2-A ga-etinyerịrị ndị na-ahụ maka njikwa dịka koodu eletriki obodo, steeti na mpaghara si dị na ihe achọrọ.

Ntụle imewe

N'okpuru bụ ndụmọdụ ụfọdụ maka ịbelata nke ọma site na iji EMB-S2-A. A na-ezo aka na waya njikwa na-ebelata ka DIM+ na DALI-/COM. Ihe nrịbama ndị na-eme nchacha nwere oke voltagnke 10V DC.

  • Akwụsịla waya DALI-/COM na ala chassis; nke a bụ mgbama nloghachi ma dị oke mkpa maka ntuchasị nke ọma.
  • Mee ka wires na-emepe emepe pụọ na ahịrị AC ma ọ bụrụ na ọ ga-ekwe omume.
  • Kachasị nke 4 DALI-2/D4i LED ọkwọ ụgbọala maka njikwa maka DALI-2/D4i Designs.
  • Kachasị 0f 8 DIM ka ọ bụrụ ndị ọkwọ ụgbọ ala ọkụ maka DIM ka gbanyụọ atụmatụ.
  • Abanyela na heatsink ma ọ bụ na onye ọkwọ ụgbọ ala LED.
  • Mgbe ị na-etinye EMB-S2-A n'ime mkpuchi, a chọrọ nlebara anya ọnọdụ antenna mpụga na nnyonye anya iji nye ike mgbama ikuku kacha mma. Tupu itinye ya na-adịgide adịgide, jide n'aka na antenna na-atụ aka elu ma ọ bụ ala na enweghị ihe ọla ọ bụla dị n'ime 12 in. nke antenna (Foto 1).synapse-EMB-S2-A-Controller-FIG-1

Ihe achọrọ

  • Akụrụngwa arịọnụ: (2) #4 na skru M3 tụrụ aro
  • Antenna Kit: Maka nhọrọ antenna dị, biko rụtụ aka na akwụkwọ ọhụrụ anyị dị na anyị websaịtị. www.synapsewireless.com/documentation

Ntuziaka ntinye

Ịdọ aka ná ntị: Izere Ọkụ, Ụjọ, ma ọ bụ Ọnwụ: Gbanyụọ Ike n'ebe mgbanaka okirikiri ma ọ bụ fiusi ma chọpụta na ike ahụ agbanyụrụ TUPU IKE!

NA-ebugo

  1. Debe onye njikwa ahụ n'ebe achọrọ ma chekwaa ya site na iji skru #4 ma ọ bụ M3 na-eji oghere mgbago dị na nsọtụ azụ nke EMB-S2-A.
    Ịgbakwunye Antenna
  2. Gbanwee ike agbanyụrụ. Mgbe ị na-ejikwa eriri antenna, onye na-ahụ maka ọrụ ahụ ga-ejiri eriri ala kwesịrị ekwesị gbanye ya.
  3. Wepu mkpuchi uzuzu rọba na-acha uhie uhie, igwe na-asa ihe, na nut na njikọ antenna.
  4. Chọpụta ebe kacha mma maka ọnọdụ antenna mpụga wee mepụta oghere iji bulie antenna na isi nnukwu (Lee eserese 2 maka nha).
  5. Na-azụ nnukwu isi site na oghere na ntinye. (Rịba ama: akwadoro oke ọkpụrụkpụ nke mgbidi nrụnye bụ 6mm ma ọ bụ 0.25 sentimita asatọ. Nke a na-enye ohere eriri zuru oke n'èzí nke nkwụnye ahụ maka njikọ antenna dị mma.)
  6. Tinye ihe ncha na nut azụ na njikọ antenna ma chekwaa ka ọ kwado ya.
  7. Kpuchie aka antenna. Jiri ụzọ mkpọ agịga imi mee ka ntụgharị 1/4 sie ike. Akwụsịla nke ọma ma ọ bụ pin RF dị na nnukwu isi ga-agbawa, na-emepụta àgwà njikọ RF adịghị mma.synapse-EMB-S2-A-Controller-FIG-2
    WIRING EMB-S2-A njikwa
    Mara: Ọ gwụla ma akọwapụtara ya, njikọ na ọkọlọtọ Dim to Off LED ọkwọ ụgbọ ala yana onye ọkwọ ụgbọ ala DALI 2 bụ otu.
  8. Jikọọ mmepụta 12-24VDC Aux site na onye ọkwọ ụgbọala LED na (POWER = BROWN waya nke EMB-S2-A.
  9. Jikọọ waya (DALI-/COMMON = Pink/WHITE STRIPE) waya nke EMB-S2-A na COMMON/DALI- ma ọ bụ COMMON/DM- dabere na onye ọkwọ ụgbọala ikanam ị nwere.
    Ijikọ sensọ
    • Mara: Nzọụkwụ 10-14 bụ maka ịgbakwunye sensọ na EMB-S2-A njikwa; ma ọ bụrụ na ị naghị ejikọta sensọ gaa na ngalaba a. Enwere ntinye ihe mmetụta abụọ na EMB-S2-A emebere maka ụdị sensọ nwere ike dị ala (24V DC).
    • A na-eji waya (SENSOR A = YELLOW) jikọọ ihe mmetụta A.
    • A na-eji waya (SENSOR B = ORANGE) jikọọ ihe mmetụta B.
  10. Jikọọ waya ike ihe mmetụta na AUX na onye ọkwọ ụgbọ ala LED (ọkwọ ụgbọala na-enye ike ihe mmetụta).
  11. Jikọọ ihe mmetụta DALI-/COMMON na COMMON/DALI- ma ọ bụ COMMON/DIM- dabere na onye ọkwọ ụgbọala ikanam ị nwere.
  12. Jikọọ ihe mmetụta CTRL/Control waya na waya (SENSOR A = YELLOW) ma ọ bụ (SENSOR B = ORANGE) waya nke EMB-S2-A njikwa.
  13. Ọ bụrụ na ị na-eji ihe karịrị otu sensọ wee megharịa nrụnye dịka akọwara n'elu.
  14. Ekwesịrị ịhazi sensọ na ngwanrọ tupu ha arụ ọrụ na sistemụ SimplySnap. (Lee eserese 3 NA 4)
    Ijikọ okirikiri DIMMING
    Mara: Nzọụkwụ 15-17 bụ maka ijikọ ruo ọkọlọtọ Dim to Off LED ọkwọ ụgbọala; Ọ bụrụ na ị na-eji onye ọkwọ ụgbọ ala DALI 2 LED gaa nzọụkwụ 18-20.
  15. Jikọọ waya (DIM+ = PURPLE) site na EMB-S2-A na waya DIM+ na onye ọkwọ ụgbọala LED.
  16. Jikọọ waya (DALI-/COMMON = PINK/WHITE STRIPE) site na EMB-S2-A na waya DIM na onye ọkwọ ụgbọala LED.
  17. Okpu ejighi ya (DALI+ = PURPLE/WHITE STRIPE) waya. (Lee foto nke 3)
    Mara: Nzọụkwụ 18-20 bụ maka ijikọ ruo onye ọkwọ ụgbọ ala DALI 2 LED.
  18. Jikọọ EMB-S2-A (DALI-/COMMON = pink/WHITE STRIPE) na waya COMMON/DALI dị na onye ọkwọ ụgbọala LED.
  19. Jikọọ waya (DALI+ = PURPLE/WHITE STRIPE) site na EMB-S2-A na onye ọkwọ ụgbọ ala DALI+.
  20. Kpuchie waya ejighi ya (DIM+ = PURPLE). (Lee eserese 4)

Ịkwalite ihe ndozi na njikwa

Mgbe ijikọchara njikwa na onye ọkwọ ụgbọ ala LED na sensọ ọ bụla, jide n'aka na ikpuchi wires ọ bụla na-ejighị ya. Gbanwee ike na nkwụnye ahụ. Ọkụ kwesịrị ịgbanwuo.synapse-EMB-S2-A-Controller-FIG-3

STATUS ikanam

Mara: Mgbe agbanyere njikwa ahụ, agba ndị a na-egosi ọkwa dị ugbu a.

  • Uhie = Enweghị netwọk ahụrụ (mkparịta ụka echefuola)
  • Green na-egbuke egbuke = Achọtara netwọkụ, ahazibeghị onye njikwa (arụnyebeghị ngwaọrụ na SimplySnap)
  • Green = Achọtara netwọkụ, ahaziri njikwa (ọrụ nkịtị)

Rụtụ aka na ntuziaka onye ọrụ SimplySnap maka ozi gbasara ịnye EMB-S2-A.

Onyonyo 3 – DIM ka Gbanyụọ eserese waya synapse-EMB-S2-A-Controller-FIG-4

Onyonyo 4 - DALI-2 eserese eserese synapse-EMB-S2-A-Controller-FIG-5

Ịdọ aka ná ntị: 

  • Ọ bụrụ na a na-eji otu Synapse njikwa d iji chụpụ ntinye DIM+ nke ọtụtụ ndị ọkwọ ụgbọ ala LED, mgbe ahụ, ahịrị DIM niile sitere na ndị ọkwọ ụgbọ ala niile ga-ejikọrịrị / mechie ọnụ iji nye onye njikwa nlọghachi / ala nkịtị.
  • Synapse agaghị akwụ ụgwọ ma ọ bụ bụrụ onye ga-akwụ ụgwọ maka imewe ya na ụzọ eletrọnịkị ọ bụla ọzọ nke couplin g DIM-ahịrị sitere na ọtụtụ ndị ọkwọ ụgbọ ala.

Ozi iwu na asambodo

Nkwupụta Mkpughe RF: Ngwa a na-akwado oke ikpughe radieshon FCC nke edobere maka gburugburu ebe anaghị achịkwa ya. Ekwesịrị ịwụnye akụrụngwa a ma rụọ ọrụ ya na anya kacha nta nke 20cm n'etiti radiator na ahụ gị. Agaghị ejikọta ihe nnyefe a ma ọ bụ na-arụ ọrụ na njikọ antenna ma ọ bụ nnyefe ọ bụla ọzọ.

Asambodo ụlọ ọrụ Canada (IC): Ngwa dijitalụ a anaghị agafe oke klaasị B maka mkpọtụ ụda redio sitere na ngwa dijitalụ nke edobere na Iwu nnyonye anya Redio nke Ngalaba Nkwukọrịta nke Canada. Le present appareil numerique n'emet pas de bruits radioelectriques depassant les limites applicable aux appareils numeriques de la class B prescrites dans le Reglement sur le brouillage radioelectrique edicte par le ministere des Communications du Canada.

Asambodo FCC na ozi nchịkwa (naanị USA)

FCC Nkebi 15 Klas B: Ngwaọrụ a na-akwado akụkụ 15 nke iwu FCC. Ọrụ dị n'okpuru ọnọdụ abụọ ndị a: (1) Ngwaọrụ ndị a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana (2) Ngwa ndị a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ịkpata arụrụ arụ.

NTỤKWỤKWỌ ỤZỌ RADIO (RFI) (FCC 15.105): A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị B, dabere na akụkụ 15 nke iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta, na-eji, ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site n'otu ma ọ bụ karịa n'ime usoro ndị a: (1) Re-orient. ma ọ bụ bugharịa antenna nnata; (2) Mee ka nkewa dị n'etiti akụrụngwa na onye nnata; (3) Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata; (4) Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.

Nkwupụta nke Nkwekọrịta (FCC 96-208 & 95-19): Synapse Wireless, Inc. na-ekwupụta na aha ngwaahịa "EMB-S2-A" nke nkwupụta a metụtara, mezuo ihe achọrọ nke Federal Communications Commission akọwapụtara dị ka nkọwa zuru ezu na nkọwa ndị a:

  • Nkeji 15, Nkebi nke B, maka akụrụngwa klaasị B
  • FCC 96-208 dị ka ọ na-emetụta kọmpụta B nkeonwe na mpụta
  • A nwalere ngwaahịa a na ụlọ nyocha Mpụga nke akwadoro maka iwu FCC wee hụ na ọ zutere FCC, akụkụ 15, oke ikuku. Agbanyere akwụkwọ file dị na Synapse Wireless, Inc.

Ọ bụrụ na FCC ID maka modul n'ime mkpuchi ngwaahịa a anaghị ahụ anya mgbe etinyere ya n'ime ngwaọrụ ọzọ, mgbe ahụ n'èzí ngwaọrụ etinyere ngwaahịa a ga-egosipụtakwa akara na-ezo aka na FCC ID modul agbakwunyere. Mgbanwe (FCC 15.21): Mgbanwe ma ọ bụ mgbanwe na akụrụngwa a nke Synapse Wireless, Inc., akwadoghị nke ọma, nwere ike imebi ikike onye ọrụ iji rụọ akụrụngwa a.

Asambodo

  • Nlereanya : EMB-S2-A
  • Nwere FCC ID: U9O-SM520
  • Nwere IC: 7084A-SM520
  • UL File Mba: E346690

Onye njikwa ngwa DALI-2 enwetara ikike

Kpọtụrụ Synapse maka Nkwado- 877-982-7888

Enyere ikike ikike - akara ngosi mebere na https://www.synapsewireless.com/about/patents

Akwụkwọ / akụrụngwa

synapse EMB-S2-A Controller [pdf] Ntuziaka nwụnye
Onye njikwa EMB-S2-A, EMB-S2-A, njikwa

Ntụaka

Ozi ndị metụtara

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *