1009TYWi5C

4 n'ime 1 RF + WiFi LED Controller

Ihe dị mkpa: Gụọ Ntuziaka niile Tupu nwụnye

Ntinye ọrụ

1. Ntinye ike 12V/24VDC
2. Mmepụta Anode nkịtị(+)
3. CH1: R/R/WW/1 mmepụta (-)
4. CH2:G/G/CW/2 mmepụta(-)
5. CH3:B/B/WW/3 mmepụta(-)
6. CH4:CW/W/CW/4 mmepụta(-)
7. CH5: WW/NC/NC/NC mmepụta(-)
   NC = Enweghị njikọ
8. "Prog" bọtịnụ, nke a na-eji ijikọ ma ọ bụ hichapụ njikọ na RF remote, iji tinye ọnọdụ njikọ WiFi
9. Ịkpọ oku maka nhọrọ ọnọdụ ngwaọrụ, ụdị DIM, CCT, RGBW na RGB+CCT 4 dị, ndabara ụlọ ọrụ bụ ọnọdụ RGB+CCT.
10. Nna-ukwu/Ntọala ohu jumper

Data ngwaahịa

Mba.	Ntinye Voltage	Mmepụta ugbu a	Ike mmepụta	Okwu	Nha(LxWxH)
1	12-24VDC	5x4A	5x (48-96) W	Voltage	145 × 46.5x16mm

• Onye njikwa RF + WiFi LED
• Ọwa 5 12/24V mgbe niile voltage mmepụta
• Oke. 4A mmepụta kwa ọwa
• Ugboro RF: 434/869.6/916.5MHz
• Dakọtara na ihe nketa RF ụwa niile
• Ọkwa mkpuchi mmiri: IP20

Nchekwa & ịdọ aka ná ntị

• Ejila ike etinyere na ngwaọrụ wụnye ya.
• Ekpughepụla ngwaọrụ ahụ na mmiri mmiri.

Ọrụ

1. Mee wiring dị ka eserese wiring.

2. Jikọọ WiFi LED njikwa na smart ekwentị ma ọ bụ mbadamba:

Nzọụkwụ 1: Budata “TuyaSmart” APP site na ụlọ ahịa APP ma ọ bụ google play, wee debanye aha akaụntụ dịka enyere ya, wee banye na akaụntụ ahụ. Biko gbanye bluetooth na smart ekwentị gị tupu oge eruo.

    

1. Pịa iji mee ngwa ahụ.
2. Pịa Debanye aha.
3. Pịa kwenye.
4. Họrọ mpaghara gị wee tinye adreesị ozi-e gị.
5. Pịa iji nweta koodu nkwenye.
6. Jiri akaụntụ ị debanyere aha banye.
7. Pịa ka ịbanye.

Nzọụkwụ 2: Pịa bọtịnụ “Prog” ugboro 5 na-aga n'ihu (ma ọ bụ tọgharịa ike onye njikwa ugboro 5) ka ịtọgharịa WiFi LED njikwa wee tọọ ya na ọnọdụ njikọta WiFi, ọkụ ọkụ ga-enwu ngwa ngwa, wee pịa “Tinye ngwaọrụ” iji jikọta WiFi. Onye njikwa LED na ekwentị smart.

   

1. Pịa ka ịgbakwunye ngwaọrụ.
2. Pịa ọkụ.
3. Pịa Isi Iyi ọkụ (Wi-Fi).
4. Họrọ netwọk WiFi nke smart ekwentị ejikọrọ.
5. Pịa ka ịga n'ihu.

Nzọụkwụ 3: Kwenye na onye ọkwọ ụgbọ ala ahụ atọrọ ka ọ bụrụ ọnọdụ njikọta na ọkụ ikanam na-enwukwa ngwa ngwa. Njikọ na-amalite, WiFi LED njikwa ga-apụta na APP interface ozugbo agbakwunyere nke ọma.

      

1. Pịa akara iji gosi.
2. Pịa ka ịga n'ihu.
3. Pịa iji mechaa gbakwunye.

Nzọụkwụ 4: Ị nwere ike ijikwa WiFi LED njikwa site APP.

 

1. Kpatụ ka ịgbanwuo/gbanye onye ọkwọ ụgbọ ala, pịa ma jide ka ịbanye interface njikwa.

3. Wepu WiFi LED njikwa si APP interface.

      

1. Kpatụ iji tinye interface dezie ngwaọrụ.
2. Pịa iji wepụ.

4. Jikọọ LED Controller na RF Remote (biko rụtụ aka na ntuziaka onye ọrụ nke kwekọrọ ekwekọ RF remote)

Nzọụkwụ 1: mee ka ebe nchekwa RF rụọ ọrụ site na ịpị bọtịnụ mkpirisi.
Nzọụkwụ 2: họrọ mpaghara dị na mpaghara RF site na ịpị obere mpaghara nọmba mpaghara ma ọ bụrụ na ọ bụ ime ime ọtụtụ mpaghara.
Nzọụkwụ 3: obere pịa "Prog". igodo dị na njikwa ikanam (ma ọ bụ tọgharịa ike ugboro 3) ka ịtọọ ya na ọnọdụ njikọta RF.
Nzọụkwụ 4: ozugbo metụ wheel agba ma ọ bụ mkpụmkpụ pịa bọtịnụ ọ bụla ọzọ ma e wezụga bọtịnụ mgbanyụ / gbanyụọ na remote.
Nzọụkwụ 5: Ọkụ ọkụ ikanam ejikọrọ na onye njikwa na-amapụ anya otu ugboro iji gosi njikọta na-aga nke ọma.

5. Hichapụ njikọ na RF Remotes

Nzọụkwụ 1: pịa ma jide "Prog". bọtịnụ ihe karịrị 3 sekọnd ruo mgbe ọkụ ikanam ejikọrọ na-egbuke egbuke, nke pụtara na ehichapụrụ njikọ ahụ nke ọma.

6. Ntọala Nna-ukwu na Ohu:

1. Onye nnata nwere ma nna ukwu na ọrụ ohu nke enwere ike ịtọ ya na jumper. Obere sekit nke jumper pụtara ọrụ nna ukwu, na sekit mepere emepe pụtara ọrụ ohu. Ozugbo nkenke sekit jumper na a nnata, biko gbanyụọ na ike na nnata ka ọ rụọ ọrụ nke ukwu. Ịtọlite ​​nna ukwu na ohu na-enyere aka mmekọrịta zuru oke nke mmetụta mgbanwe agba.
2. Tọọ otu onye nnata ka ọ bụrụ nna ukwu wee jikọta ya na mpaghara ọ bụla dịpụrụ adịpụ, mpaghara a ga-enwe naanị otu nnata nke na-arụ ọrụ dịka nna ukwu. Tọọ ndị nnata ndị ọzọ ka ọ bụrụ ohu wee jikọta ha na mpaghara ndị ọzọ nke ime ime, yana ọtụtụ ndị nnata nwere ike jikọta na mpaghara ọ bụla. Wee họrọ mpaghara niile dị n'ime ime ma kpọọ mmetụta na-agbanwe agba, nna ukwu ga-ezigara ndị ohu ahụ mgbaama mmekọrịta iji nweta mmekọrịta zuru oke. Nke kacha. anya mmekọrịta dị n'etiti nna ukwu na ohu ọ bụla dị n'ime 30m.

Eserese waya

1) Ọnọdụ RGB + CCT

Mara: biko jide n'aka na mgbanaka ngbanwe dị n'ọnọdụ maka RGB+CCT dị ka egosiri na eserese dị n'elu.

2) Ọnọdụ RGBW

Mara: biko jide n'aka na mgba ọkụ ọkpụkpọ dị n'ọnọdụ maka ọnọdụ RGBW dị ka egosiri na eserese dị n'elu.

3) Ụdị CCT

Mara: biko jide n'aka na mgba ọkụ ọkpụkpọ nọ n'ọnọdụ maka ọnọdụ CCT dị ka egosiri na eserese dị n'elu.

4) Ọnọdụ DIM

Mara: biko jide n'aka na ngbanwe ngbanwe dị n'ọnọdụ maka ọnọdụ DIM dị ka egosiri na eserese dị n'elu.

Akwụkwọ / akụrụngwa

SUNRICHER 1009TYWi5C 4 na 1 RF Plus WiFi LED Controller [pdf] Ntuziaka 1009TYWi5C, 4 na 1 RF Plus WiFi LED Controller, 1009TYWi5C 4 na 1 RF Plus WiFi LED Controller, RF Plus WiFi LED Controller, WiFi LED Controller, LED Controller, Controller.

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ