STMicroelectronics STM32Cube Ikuku Industrial Node SensorTile Igbe

Akụrụngwa na ngwanrọ agwụlaview

Ngwaike karịrịview

1. Sample mmejuputa iwu dị maka:
2.  STEVAL-STWINBX1 STWIN.box – SensorTile Wireless Industrial Node Development Kit
3.  STEVAL-MKBOXPRO SensorTile.box-Pro ọtụtụ ihe mmetụta na ngwa mmepe njikọ ikuku maka ọnụ ọgụgụ IoT ọ bụla nwere ọgụgụ isi.
4. STEVAL-STWINKT1B STWIN – SensorTile Wireless Industrial Node Development Kit

Ngwaike karịrịview (2/2)

• STWIN.box – SensorTile Ikuku Industrial Node
• STWIN.box (STEVAL-STWINBX1) bụ ngwa mmepe na nrụtụ aka nke na-eme ka prototyping na nnwale nke ngwa nhụta ụlọ ọrụ dị elu na ọnọdụ IoT dị ka nlekota ọnọdụ na amụma amụma.
• Ọ bụ mgbanwe nke ngwa STWIN mbụ (STEVAL-STWINKT1B) yana njiri arụmọrụ dị elu dị elu na nha nke mkpọtụ, ike siri ike, BoM emelitere iji gosipụta MCU kachasị ọhụrụ na nke kacha mma na klaasị ụlọ ọrụ yana ihe mmetụta dị mfe iji maka mgbakwunye mpụga.
• Ngwa STWIN.box nwere usoro isi STWIN.box, batrị LiPo 480mAh, ihe nkwụnye maka ST-LINK debugger (STEVAL-MKIGIBV4), akpa rọba, mbadamba ihe nkwụnye maka DIL 24 sensọ na eriri na-agbanwe agbanwe.

Atụmatụ igodo

• Multi-sensing wireless n'elu ikpo okwu maka vibration nlekota na ultrasound nchọpụta
•  Ewuru gburugburu bọọdụ isi sistemụ STWIN.box nwere nhazi, nghọta, njikọta na ikike mgbasawanye.
• Oke dị ala Arm® Cortex®-M33 nwere FPU na TrustZone na 160 MHz, 2048 kBytes Flash ebe nchekwa (STM32U585AI)
• Oghere kaadị MicroSD maka ngwa ndekọ data kwụ ọtọ
• Nka na ụzụ Bluetooth® dị ala v5.0 teknụzụ ikuku (BlueNRG-M2), Wi-Fi (EMW3080) na NFC (ST25DV04K)
•  Nnukwu ihe mmetụta IoT nke ụlọ ọrụ mmepụta ihe: bandwidth Ultra-wide (ruo 6 kHz), mkpọtụ dị ala, 3-axis digital vibration sensọ (IIS3DWB), 3D accelerometer + 3D gyro iNEMO inertial nha unit (ISM330DHCX) na Machine Learning Core, High-performance ultra-meter industrial application accele3. (IIS2DLPC), Ultra-obere ike 3-axis magnetometer (IIS2MDC), Dual zuru-ọnụ ọgụgụ, 1.26 mmanya na 4 mmanya, zuru oke dijitalụ mmepụta barometer na zuru-ebu ngwugwu (ILPS22QS), Low-vol.tage, ultra ala ike, 0.5°C izi ezi I²C/SBus 3.0 okpomọkụ sensọ (STTS22H), Industrial ọkwa dijitalụ MEMS igwe (IMP34DT05), Analog MEMS igwe na nzaghachi ugboro ugboro ruo 80 kHz (IMP23ABSU)
• Enwere ike ịgbasawanye site na njikọ FPC 34-pin
• Ozi kacha ọhụrụ dị na www.st.com/stwinbx1

Ngwaike karịrịview (2/2)

• Ngwa mmepe STEVAL-STWINBX1 gụnyere:
• Sistemụ isi STEVAL-STWBXCS1 STWIN.box (isi bọọdụ)
• Akpa plastik nwere bolts M3
• Batrị LiPo 480mAh 3.7V
• Ihe nkwụnye STEVAL-MKIGIBV4 ST-LINK nwere eriri mmemme
• Ihe nkwụnye ihe nkwụnye STEVAL-C34DIL24 maka sensọ DIL24 nwere eriri STEVAL-FLTCB01 na-agbanwe agbanwe.

• Ngwaike karịrịview (1/2) 

SensorTile.box-Pro – ọtụtụ ihe mmetụta na ngwa mmepe njikọ ikuku maka ọnụ ọgụgụ IoT ọ bụla nwere ọgụgụ isi.

• SensorTile.box-Pro (STEVAL-MKBOXPRO) bụ ngwa igbe ikuku ikuku dị njikere maka iji mepụta ngwa IoT ọ bụla dabere na mkpokọta data dịpụrụ adịpụ, na-erigbu ikike zuru oke site n'ịkwalite ma ngagharị na data gburugburu ebe obibi, yana igwe igwe dijitalụ, wee kwalite njikọta na amamihe nke gburugburu ebe ọ bụla ị chọtara onwe gị.
•  Ihe SensorTile.box-Pro mejupụtara SensorTile.box-Pro core system, batrị LiPo 480mAh, ihe nkwụnye maka ST-LINK debugger (STEVAL-MKIGIBV4), akpa rọba, QVAR electrodes, ikuku na-anata chaja ikuku na eriri na-agbanwe agbanwe.

Atụmatụ igodo

• Ultra-obere ike nwere FPU Arm-Cortex-M33 nwere TrustZone® microcontroller (STM32U585AI)
• Igwe ihe mmetụta dị elu iji kpokọta data dị elu: obere voltajitage local dijitalụ okpomọkụ sensọ (STTS22H), isii-axis inertial nha unit (LSM6DSV16X), atọ-axis obere ike accelerometer (LIS2DU12), 3-axis magnetometer (LIS2MDL), mgbali ihe mmetụta (LPS22DF) na dijitalụ igwe / audio sensọ (MP23DB01HP)
• HW ike mgba ọkụ, 4 programmable ọnọdụ LEDs (acha akwụkwọ ndụ akwụkwọ ndụ, ọbara ọbara, oroma, acha anụnụ anụnụ), 2 mmemme push-bọtịnụ, audio buzzer – Tọgharia bọtịnụ, qvar na electrodes maka njirimara interface onye ọrụ.
• Interface maka J-Link/SWD debug-probe, Interface maka ndọtị osisi na oghere maka DIL24 ihe nkwụnye ihe mmetụta.
• Njikọta: oghere kaadị microSD, Bluetooth® obere ike 5.2 (BlueNRG 355AC), NFC tag (ST25DV04K)
• Nhọrọ ike na nchaji: USB Type-C® chaja na njikọ, chaja ikuku 5W na batrị 480mAh
• Ozi kacha ọhụrụ dị na www. https://www.st.com/en/evaluation-tools/stevalmkboxpro.html

Ngwaike karịrịview (2/2)

• Ngwa mmepe STEVAL-MKBOXPRO gụnyere:
• SensorTile.Box Pro (isi bọọdụ)
•  akpa rọba nwere skru M2.5
• batrị 480mAh 3.7 V LiPo
• Qvar electrodes
• sekit nnabata chaja ikuku
• NFC mmemme tag
• microSD kaadị
• STEVAL-MKIGIBV4 STLINK nkwụnye nwere eriri mmemme

Ngwanrọ Ngabigaview

• Nkọwa sọftụwia FP-SNS-STAIOTCFT
• FP-SNS-STAIOTCFT bụ ngwugwu ọrụ STM32Cube arụnyere ka ejiri ya na Web ngwa ST AIoT Craft.
• Ebumnuche nke ngwugwu a na-arụ ọrụ bụ ịnye ngwa dị mfe nke na-egosi otu esi ewuo ngwa ọdịnala maka bọọdụ STEVAL-MKBOXPRO, STEVAL-STWINBX1 na STEVAL-STWINKT1B.
• Ewubere mgbasawanye ahụ na teknụzụ sọftụwia STM32Cube iji mee ka ọ dị mfe ibugharị n'ofe microcontrollers STM32 dị iche iche.

Njirimara isi

• Ngwa zuru ezu maka otu esi eji:
• Algọridim AI na MCU, MLC na ISPU
• Iji PnPL protocol na-ekwurịta okwu na izipu iwu/telemetries/properites
• Iji nzikọrịta ozi USB iji gosipụta nsonaazụ nrịbama
• Na-erigbu X-CUBE-MEMS1/ISPU dị adịlarị iji kwado ihe mmetụta dị iche iche
• Na-erigbu X-CUBE-AI iji bubata netwọkụ akwara ahọpụtara
• Mfe ibufe n'ofe ezinụlọ MCU dị iche iche, ekele maka STM32Cube
• Usoro ikike efu, enyi na enyi.
• Ozi kacha ọhụrụ dị na www.st.com FP-SNS-STAIOTCFT

Ngwa nhazi & ngosi

Ngwanrọ na ihe ndị ọzọ achọrọ

FP-SNS-STAIOTCFT
Detuo .zip file ọdịnaya n'ime nchekwa na PC gị. Ngwugwu a ga-enwe koodu isi mmalite example (Keil, IAR, STM32Cube IDE) dabere na STEVAL-STWINKT1B, STEVAL-STWINBX1 na STEVAL-MKBOXPRO.

Ntọalaview

Ihe achọrọ na nhazi HW maka STEVAL-STWINKT1B

• 1 x STEVAL-STWINKT1B bọọdụ nyocha
• Laptọọpụ / PC nwere Windows 10, 11
• 2 x microUSB eriri
• 1x ST-LINK-V3SET (ma ọ bụ ST-LINK-V3MINI) ihe nbibi/mmemme

Ihe achọrọ na nhazi HW maka STEVAL-STWINBX1

• 1 x STEVAL-STWINBX1 bọọdụ nyocha
• Laptọọpụ / PC nwere Windows 10, 11
• 1 x microUSB eriri
• 1 x ụdị-C eriri USB
• 1x ST-LINK-V3SET (ma ọ bụ ST-LINK-V3MINI) ihe nbibi/mmemme

Ihe achọrọ na nhazi HW maka SEVAL-MKBOXPRO

• 1x bọọdụ nyocha STEVAL-MKBOXPRO
• Laptọọpụ / PC nwere Windows 10, 11
• 1 x microUSB eriri
• 1 x ụdị-C eriri USB
• 1x ST-LINK-V3SET (ma ọ bụ ST-LINK-V3MINI) ihe nbibi/mmemme

Malite itinye koodu n'ime nkeji ole na ole

www.st.com/stm32ode

Nchọpụta nsogbu maka STEVAL-MKBOXPRO

Mgbe bọọdụ ahụ malitere, maka ndị exampOtú ọ dị, osisi ahụ ga-eji Oroma LED maka igosi na ihe niile dị nke ọma na ọ na-arụ ọrụ.

Ngwa ngosi: AI Inertial

FP-SNS-STAIOTCFT (AI Inertial)

STEVAL-MKBOXPRO – STWINKT1B – STWINBX1

Ebumnuche nke ngwa a bụ igosi ngwa ntinye aka na Machine Learning Core yana na MCU, ISPU. Maka bọọdụ mmepe niile, ngwa ahụ na-amalite mgbasa ozi ozugbo gbasara nhazi ọkwa nke ọnọdụ Ndepụta Akụrụngwa, mana n'ụkpụrụ enwere ike iji ngwa MLC ọ bụla site na itinye nhazi ọhụrụ site na otu iwu PnPL akọwapụtara Smart Asset Tracking scenario bụ otu egosiri na Portal nke ST AIoT Craft.

Akwụkwọ & Ihe ndị metụtara ya

Akwụkwọ niile dị na taabụ DESIGN nke ngwaahịa ndị emetụtara webibe

• FP-SNS-STBOX1:
• DB: mkpọ ọrụ STM32Cube - databrief
• UM: Malite na ngwugwu ọrụ STM32Cube – akwụkwọ ntuziaka onye ọrụ
• Ntọlite ​​ngwanrọ file

Gburugburu mmepe mepere emepe STM32

gafereview

STM32 mepere emepe gburugburu ngwa ngwa, nhazi na mmepe dị ọnụ ala

The STM32 Open Development Environment (STM32 ODE) bụ ụzọ mepere emepe, na-agbanwe agbanwe, dị mfe na ọnụ ọnụ iji mepụta ngwaọrụ na ngwa ọhụrụ dabere na ezinụlọ STM32 32-bit microcontroller jikọtara ya na akụrụngwa ST ọgbara ọhụrụ jikọtara site na bọọdụ mgbasawanye. Ọ na-enyere ngwa ngwa prototyping na-eduga-ọnụ mmiri nwere ike ngwa ngwa ghọọ ikpeazụ aghụghọ.

Maka ozi ndị ọzọ, biko gaa na www.st.com/stm32ode

Daalụ

© STMicroelectronics – Ikike niile echekwabara.
Akara ụlọọrụ STMicroelectronics bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke otu ụlọ ọrụ STMicroelectronics. Aha ndị ọzọ niile bụ ihe onwunwe nke ndị nwe ha.

FAQS

Q: Gịnị bụ isi atụmatụ nke FP-SNS-STAIOTCFT?

A: FP-SNS-STAIOTCFT na-enye ngwa dị mfe maka mmepe omenala na bọọdụ akọwapụtara ma wuo ya na teknụzụ ngwanrọ STM32Cube maka ibugharị.

Ajụjụ: Ebee ka m nwere ike ịhụ ozi ndị ọzọ gbasara ihe achọrọ ngwaike na ngwanrọ?

A: Enwere ike ịchọta ozi gbasara ngwaike na ngwa ngwanrọ na nhazi n'eluview ngalaba nke ntuziaka onye ọrụ.

Ajụjụ: Kedu ka m ga-esi malite itinye koodu site na iji FP-SNS-STAIOTCFT?

A: Iji malite itinye koodu na FP-SNS-STAIOTCFT, soro ntuziaka ntọlite ​​​​nyere n'akwụkwọ ntuziaka onye ọrụ wee rụtụ aka na akwụkwọ nhazi ngwugwu maka nduzi.

Akwụkwọ / akụrụngwa

STMicroelectronics STM32Cube Ikuku Industrial Node SensorTile Igbe [pdf] Ntuziaka onye ọrụ STM32Cube, STM32Cube Ikuku Industrial Node SensorTile Igbe, Ikuku Industrial Node SensorTile Igbe, Industrial Node SensorTile Igbe, SensorTile Igbe

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ