StarTech P2ADDH462-KVM-SWITCH 2 Port Dual Monitor HDMI DisplayPort KVM Gbanwee

2-Port Dual-Monitor HDMI/DisplayPort KVM mgbanwe - 4K 60Hz - USB 5Gbps

NJ ngwaahịa
P2ADDH462-KVM-gbanwee

Ozi ngwaahịa

Maka sọftụwia kachasị ọhụrụ, akwụkwọ ntuziaka, ozi ngwaahịa, nkọwa nka, na nkwupụta nkwenye, biko gaa na:  www.StarTech.com/P2ADDH462-KVM-SWITCH

Iwu Hotkey

Iwu hotkey bụ usoro igodo igodo na-ebute ọrụ kọmputa/ngwaọrụ enwere ike iji malite ọrụ KVM ịgbanwee. A ga-ebuterịrị usoro iwu hotkey site na HK_LCode (koodu na-eduga HotKey), igodo mkpịrị 1-2 ga-esochi ya. Ntinye iwu hotkey na-aga nke ọma na-ebute ụda ụda dị elu. Ntinye iwu hotkey na-eme nke ọma na-ebute ụda ụda dị ala.

ndetu:

• A ghaghị itinye nchikota igodo igodo niile n'usoro ngwa ngwa.
• Pịa ma hapụ igodo egosiri, ọ gwụla ma akọwapụtara ya ọzọ.

HK_LCode

1. Nhọrọ 1.1
   • Scr Lck + Scr Lck
2. Nhọrọ 1.2
   Ka ịgbanwee HK_LCode:
   • HK_LCode + H + Esc, Caps, ma ọ bụ F12
   • N'aka nke ọzọ, pịa ma jide bọtịnụ Nhọrọ Ọbịa n'ihu maka PC2, ruo mgbe ụda abụọ ga-apụta, wee pịa igodo ọkụ nke Scr Lck, ESC, Caps, ma ọ bụ F2.

Hotkey Iwu	Ọrụ
HK_LCode + 1 ~ 2 or HK_LCode + F1 ~ F2	Select PC 1 or PC 2.
HK_LCode + W	Disable the binding between PC (USB/Video) and Audio when switching between PC 1 or PC 2. Allows switching of PC Ports USB and Video functions, while Audio does not switch
HK_LCode + Q	Enable the binding of PC (USB/Video) and Audio switching. Audio will switch with the PC Ports USB and Video functions. Kwadoro na ndabara.
HK_LCode + F5 ~ F6	Audio Unbound: Selects only the audio and mic source between PC 1 or PC 2, does not switch USB and Video Audio Bound: Select PC 1 or PC 2 and their respective USB/Video/Audio Ports
HK_LCode + Up Ụka Igodo or HK_LCode + Ala igodo akụ	Select the next/previous PC Port. If Audio is unbound, the audio will not switch
HK_LCode + B	Disable the Beep that indicates HotKey Command Inputs.
HK_LCode + S	Enable Autoscan. Press any key to stop the Autoscan function.
HK_LCode + H + "x"	Define the Autoscan time delay. “x” = 1 – 10sec, 2 – 20sec, 3 – 30sec, 4 – 40sec, 5 – 50sec, 6 – 60sec, 7 – 70sec, 8 – 80sec, 9 – 90sec, 0 – 100sec

Iji view akwụkwọ ntuziaka, FAQs, vidiyo, ndị ọkwọ ụgbọ ala, nbudata, eserese teknụzụ, na ndị ọzọ, nleta www.startech.com/support

FAQ

• Ajụjụ: Kedu ka m ga-esi gbanwee n'etiti ngwaọrụ ejikọrọ na iji mgba ọkụ KVM?
  A: To switch between connected devices, use the hotkey command sequence specified in the user manual. Press the HK_LCode followed by the corresponding keys to switch seamlessly.

Akwụkwọ / akụrụngwa

StarTech P2ADDH462-KVM-SWITCH 2 Port Dual Monitor HDMI DisplayPort KVM Gbanwee [pdf] Ntuziaka onye ọrụ P2ADDH462-KVM-SWITCH, P2ADDH462-KVM-SWITCH 2 Port Dual Monitor HDMI DisplayPort KVM Switch, P2ADDH462-KVM-SWITCH, 2 Port Dual Monitor HDMI DisplayPort KVM Switch, Dual Monitor HDMI DisplayPort KVM Gbanwee, HDMI Gbanwee DisplayPort KVM Gbanwee, Ngbanwe KVM KVM, Ngbanwe KVM

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ