SMARTRISE C4 Njikọ 2 Onye mmemme

gafereview

Akwụkwọ a na-enye ntuziaka nzọụkwụ site na nbudata, wụnye, na iji Link2 Programmer na C4 njikwa. Ọ na-akọwa otu esi etinye ngwanrọ na njikwa C4 site na iji Link2 Programmer.

Required Tools for Software Programming

Ngwa ndị a chọrọ iji hazie ngwanro a:

1.  Laptọọpụ nwere sistemụ arụmọrụ dabere na Windows.
2. Onye mmemme Link2.
3. Controller software: The original controller software is stored on a flash drive inside the white job binder. If the flash drive is missing or contains outdated prints and software, Smartrise can provide a webnjikọ iji nweta ngwanrọ na mbipụta kachasị ọhụrụ.

Application Download Instructions

Ka ibunye ngwanrọ na njikwa Smartrise, a ga-ebudatarịrị ngwa mmemme na laptọọpụ. Ngwa a dị na draịva flash. Soro usoro ndị a ka ibudata ngwa C4 Link2 Programmer:

1. Mepee flash mbanye.
2. Navigate to (5) – Smartrise Programs and open the folder
3. Chọta wee mepee folda C4 Programmer.
4. Download and run both applications on the laptop. Some laptops may have firewalls that prevent applications from downloading. For assistance, contact the system administrator.
5. Once completed, the two applications should appear on the desktop.
   NOTE: MCUXpresso does not need to be opened, only installed on the laptop.

Software Loading Instructions

Iji hụ na ọ na-arụ ọrụ nke ọma, a ga-ebunye sọftụwia njikwa na njikwa Smartrise site na iji Link2 Programmer. Soro usoro n'okpuru iji mezue usoro:

1. Connect the Link2 Programmer to the laptop via the USB port.
2. Open the C4 Link2 Programmer by double-clicking its icon. The application will automatically update to the latest version if connected to the internet. Ensure the application is up to date before proceeding.
3. Chọgharịa maka ngwanrọ njikwa:
   1. Open (1) – Controller Software.
   2. Họrọ folda nwere aha ọrụ.
   3. Họrọ ụgbọ ala ị ga-ebu software maka.
   4. Pịa Họrọ nchekwa na ala nke mpio ahụ.
   5. Select the processor to update using the dropdown menu. Processors can be updated in any order:
      • MR A: MR MCUA
      • MR B: MR MCUB
      • SRU A: CT na COP MCUA
      • SRU B: CT na COP MCUB
      • Riser/Mgbasawanye: Riser/Mgbasawanye osisi

Enwere ike ịhụ njikọ ihe nhazi na osisi.

Start the software loading process by clicking the Start button.

Ihe dị mkpa: Mgbe ị na-eme mmemme MR SRU, ụgbọ ala ndị ọzọ nọ na otu ahụ nwere ike imetụta. Iji gbochie nke a, kwupu njikọ ọnụ ọnụ na bọọdụ ahụ.

A new window will appear, and the software download will begin. Once complete, a confirmation message will be displayed.

IHE: Ọ bụrụ na ngwanro enweghị nbudata, nwaa ihe ndị a:

1. Retry the process.
2. Jiri ọdụ ụgbọ USB dị iche.
3. Power cycle the controller.
4. Ensure the Link2 Programmer is properly connected.
5. Malitegharịa ekwentị ahụ.
6. Try a different Link2 Programmer.
7. Use a different laptop.
8. Contact Smartrise for assistance.

• Click Edit to continue loading software for the remaining processors and follow the previous steps.
• Once all software uploads are complete, reconnect the group terminals and power cycle the controller.
• Verify the software version under Main Menu | About | Vers.
• Pịgharịa gaa na view nhọrọ niile ma gosi na egosipụtara ụdị a tụrụ anya ya.

FAQ

Ajụjụ: Gịnị ka m ga-eme ma ọ bụrụ na m zutere njehie n'oge nbudata software?

A: If you encounter errors during software loading, ensure that all connections are secure and try restarting the process. If issues persist, contact Smartrise support for assistance.

Akwụkwọ / akụrụngwa

SMARTRISE C4 Njikọ 2 Onye mmemme [pdf] Ntuziaka C4 Link 2 Programmer, C4, Link 2 Programmer, Programmer

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ