SMARTEH LPC-2.DX1 Longo njikwa mmemme

Nkọwapụta

• Aha ngwaahịa: Longo Programmable Controller LPC-2.DX1 Module Relay
• Ụdị: 2
• Onye nrụpụta: SMARTEH doo
• Nrụ ọrụ Voltage: 100 - 240 V AC
• Mmepụta: Nyefee mmepụta dijitalụ site na iji kọntaktị (MỤTỤ)
• Atụmatụ: Inrush nchebe ugbu a, galvanic dịpụrụ adịpụ mmepụta, akara ngosi LED, nchọpụta ọnọdụ fuse
• Ịkwanye: Standard DIN EN50022-35 okporo ígwè na-agbago

FAQ

Ajụjụ: Enwere ike iji modul LPC-2.DX1 na ibu inductive na capacitive?

A: Ee, LPC-2.DX1 modul dị mma maka iji ma ibu ọrụ na-emepụta ihe na nke capacitive dị ka ndị na-atụgharị uche, ndị ọrụ nkwekọrịta, na moto.

Q: Olee otú modul LPC-2.DX1 kwadoro?

A: The LPC-2.DX1 modul na-kwadoro site na isi modul (eg, LPC-2.MU1, LPC-2.MC9) site Right esịtidem ụgbọ ala.

Q: Olee ụdị arịọnụ ka LPC-2.DX1 modul na-akwado?

A: The LPC-2.DX1 modul na-akwado ọkọlọtọ DIN EN50022-35 okporo ígwè arịọnụ maka mfe echichi.

SMARTEH doo dere
Nwebiisinka © 2024, SMARTEH doo
Akwụkwọ ntuziaka onye ọrụ
Ụdị akwụkwọ: 2
Mee, 2024

Ịdọ aka ná ntị

• Ọkọlọtọ NA NKE : Ụkpụrụ, ndụmọdụ, ụkpụrụ na ndokwa nke mba nke ngwaọrụ ga-arụ ọrụ, ga-atụle mgbe ị na-eme atụmatụ na ịmepụta ngwaọrụ eletriki. Na-arụ ọrụ na 100 .. 240 V AC netwọk ka a na-anabata maka naanị ndị ọrụ ikike.
• Ịdọ aka ná ntị dị ize ndụ: Ngwaọrụ ma ọ bụ modul ga-echebe site na mmiri mmiri, unyi na mmebi n'oge njem, nchekwa na arụ ọrụ.
• Ọnọdụ ikike: Maka modul niile LONGO LPC-2 - ọ bụrụ na emeghị mgbanwe ọ bụla na ndị ọrụ nyere ikike jikọtara ya nke ọma - n'ihe gbasara ikike njikọ njikọ kacha, akwụkwọ ikike nke ọnwa 24 dị irè site na ụbọchị ire ere na onye na-azụ ahịa, mana ọ bụghị ihe karịrị ọnwa 36 mgbe nnyefe sitere na Smarteh. N'ihe gbasara nkwupụta n'ime oge ikike, nke dabere na ihe adịghị arụ ọrụ, onye nrụpụta na-enye nnọchi n'efu. Usoro nloghachi nke modul arụghị ọrụ, yana nkọwa, nwere ike ịhazi ya na onye nnọchi anya anyị nyere ikike. Akwụkwọ ikike anaghị agụnye mmebi n'ihi njem ma ọ bụ n'ihi ụkpụrụ kwekọrọ na obodo, ebe etinyere modul.
• Ekwesịrị ijikọ ngwaọrụ a nke ọma site na atụmatụ njikọ enyere na akwụkwọ ntuziaka a. Njikọ na-ezighi ezi nwere ike bute mmebi ngwaọrụ, ọkụ ma ọ bụ mmerụ ahụ nkeonwe.
• Egwu dị egwutage n'ime ngwaọrụ ahụ nwere ike ịkpata ujo eletrik ma nwee ike bute mmerụ ahụ ma ọ bụ ọnwụ nke onwe ya.
• Ejila ngwa ahịa a rụọ n'onwe gị!
• Agaghị etinye ngwaọrụ a na sistemụ dị mkpa maka ndụ (dịka ngwaọrụ ahụike, ụgbọ elu, wdg).
• Ọ bụrụ na ejiri ngwaọrụ ahụ n'ụzọ onye nrụpụta akọwapụtaghị ya, ogo nchekwa nke akụrụngwa nyere nwere ike imebi.
• A ga-anakọtarịrị ngwa eletriki na akụrụngwa eletrọnịkị (WEEE) iche iche!
• LONGO LPC-2 na-agbaso ụkpụrụ ndị a:
  • EMC: EN 61000-6-3: 2007 + A1: 2011, EN 61000-6-1: 2007, EN 61000- 3- 2: 2006 + A1: 2009 + A2: 2009, EN 61000-3-3:
  • LVD: IEC 61010-1: 2010 (3rd Ed.), IEC 61010-2-201:2013 (1st Ed.)
• Smarteh doo na-arụ ọrụ amụma nke mmepe na-aga n'ihu. Ya mere, anyị na-edobe ikike ime mgbanwe na ndozi na ngwaahịa ọ bụla akọwara n'ime akwụkwọ ntuziaka a na-enweghị ọkwa ọ bụla.

Onye nrụpụta:
SMARTEH doo
Poljubinj 114
5220 Tolmin
Slovenia

MKPEBI

• DC Direct Ugbu a
• AC Na-agbanwe ugbu a
• RX Nara
• TX Nyefee
• UART Ihe nfefe niile anaghị arụkọ ọrụ ọnụ
• Mba Na-emepe emepe
• PLC Ihe njikwa mgbagha mmemme

Nkọwa

LPC-2.DX1 bụ a ọsọ agba anọ mmepụta modul na inrush ugbu a nchebe na galvanic dịpụrụ adịpụ mmepụta. Enwere ike iji ya mee ihe n'ọtụtụ ọrụ. Ọ dabara adaba iji ya na ibu inductive ma ọ bụ capacitive (dịka reflectors, ndị ọrụ ngo, moto).
Ikanam na-egosi mgbama nọ n'ọrụ dị na mmepụta modul yana ọkwa fuse.
A na-achịkwa LPC-2.DX1 ma kwadoro ya site na modul bụ isi (dịka LPC-2.MU1, LPC-2.MC9, ...) site na ụgbọ ala ime ụlọ ziri ezi.

Atụmatụ

Tebụl 1: data teknụzụ

• Relay dijitalụ mmepụta na-eme ka kọntaktị (NO), inrush ugbu a nwere oke, galvanic dịpụrụ adịpụ
• Ihe mgbaàmà LED
• Nchọpụta fiusi gbawara agbawa
• Enyere ya site na modul isi
• Obere akụkụ na ọkọlọtọ DIN EN50022-35 mgbago ụgbọ okporo ígwè

Ọrụ

• Enwere ike ịchịkwa modul LPC-2.DX1 site na modul PLC isi (dịka LPC-2.MC9, LPC-2.MM1). Enwere ike ịgụ ma ọ bụ dee paramita modul site na ngwa Smarteh IDE.
• E nwekwara ike ijikwa modul LPC-2.DX1 site na modul ntinye ntinye dịpụrụ adịpụ (dịka LPC-2.MU1).
• ỊDỌ AKA NA NTỊ: Mgbe arụ ọrụ nke mmepụta, ugbu a na-agafe na thermistor NTC, na-amachi inrush ugbu a. N'ihi ya, thermistor NTC na-ekpo ọkụ n'oge nrụpụta mmepụta. Iji hụ na arụ ọrụ a pụrụ ịdabere na ya, oge n'etiti usoro mmepụta ihe ga-ezuru iji kwe ka thermistor NTC dị jụụ kpamkpam.
• Ngwa ngwa akọwapụtara obere oge igbu oge n'etiti mwepu arụ ọrụ na mweghachi ka atọrọ ka 20 sekọnd. Agbanyeghị, ọnụ ahịa oge agwụchabeghị ka ọ bụrụ oke kacha. Ọ na-eje ozi dị ka ihe ncheta ka ị tụlee ihe jụrụ oyi chọrọ nke NTC thermistor mgbe ị na-emepụta usoro ọrụ nke ngwa gị.
• Rụtụ aka na eserese oge agụnyere maka ihe ngosi anya nke mmepụta ON igbu oge (toff) mgbe ike ngwaọrụ na ON igbu oge (toff) n'etiti mmepụta okirikiri.
• Ọ bụrụ na okpomọkụ a tụrụ site n'ihe NTC thermistor na-atụ gafere 80 Celsius, a ga-emenyụ mmepụta ya.

Ọgụgụ 2: Mpụta ON-egbu oge

SmartehIDE Parameters

Ntinye

Igwe ọkụ dị n'ime [DX1_x_ai_internal_temp]: Nleta okpomọkụ dị na PCB.

Ụdị: UNINT

Raw ka injinia data: 0 .. 65535 → 0 .. 655.35 °C

Ọkwa fiusi [DX1_x di_fuse_status]: Fịọ ọkwa ntinye dijitalụ.

Ụdị: BOOL

• 0 → Fuse fụrụ afụ
• 1 → Tinye OK

Mpụta

Mbupute dijitalụ nyefee [DX1_x_do_out]: Ọkwa mmepụta dijitalụ nyefee.

Ụdị: BOOL

Ihe omuma nke injinia:

• 0 → Gbanyụọ mmepụta dijitalụ
• 1 → Digital mmepụta ON

Ịwụnye

Atụmatụ njikọ

Ọgụgụ 3: Atụmatụ njikọ

Tebụl 2: IN

N'ime.3	L	Ntinye ọkụ ọkụ – ahịrị, 100 .. 240 V AC, 50/60 Hz
N'ime.4	N	Ntinye ọkụ ọkụ - na-anọpụ iche, 100 .. 240 V AC, 50/60 Hz
Tebụl 3: Ọpụpụ
Mpụ.1	L1	Mmepụta ọkụ ọkụ - ahịrị, 100 .. 240 V AC, 50/60 Hz
Mpụ.2	N1	Mmepụta ọkụ ọkụ - na-anọpụ iche, 100 .. 240 V AC, 50/60 Hz
Tebụl 4: Fuse
Fuse	4A (T-eji nwayọọ)	Cartridge fuse 5 × 20 mm
Isiokwu 5: LED
LED: green	Ọnọdụ LED	GBANYE: Mpụpụ agbanwuru na ike na mmepụta Gbanyụọ: Mpụpụ agbanyụrụ na enweghị ike na mmepụta Blinking: Enweghị ike na mmepụta, fuse fụrụ ma ọ bụ enweghị vol.tage na ntinye

Tebụl 6: K1
BUS dị n'ime	Data & DC ike ọkọnọ	Njikọ na modul I/O
Tebụl 7: K2
BUS dị n'ime	Data & DC ike ọkọnọ	Njikọ na modul I/O

Ntuziaka ntinye

Ọgụgụ 4: Akụkụ ụlọ

Akụkụ na millimeters.

Njikọ niile, mgbakwunye modul na mgbakọ ga-emerịrị ebe modul anaghị ejikọta ya na isi ike.

Ntuziaka ntinye:

1. Gbanyụọ isi ọkụ ọkụ.
2. Ugwu LPC-2.DX1 modul na ebe a na-enye n'ime panel eletriki (DIN EN50022-35 rail mounting).
3. Wụnye modul LPC-2 ndị ọzọ (ọ bụrụ na achọrọ ya). Buru ụzọ bulie modul nke ọ bụla na okporo ụzọ DIN, wee jikọta modul ọnụ site na njikọ K1 na K2.
4. Jikọọ eriri ntinye na mmepụta dịka atụmatụ njikọ dị na foto 2 si dị.
5. Gbanwee ọkụ ọkụ isi.

Wetuo n'usoro ọzọ. Maka modul na-ebuli / ịkwatu na / site na DIN rail a ga-ahapụrịrị ohere efu nke opekata mpe otu modul n'ọdụ ụgbọ okporo ígwè DIN.
IHE: LPC-2 isi modul kwesịrị ịkwado iche na ngwa eletriki ndị ọzọ ejikọrọ na sistemụ LPC-2. A ghaghị ịwụnye wires mgbaàmà iche iche site na ike na elu voltage wires dị ka izugbe ụlọ ọrụ eletriki nwụnye ọkọlọtọ.

Onyonyo 5: Mwepu kacha nta

A ga-atụle nchapụta ndị dị n'elu tupu ịtinye modul.

Onyonyo 6: Fose nnọchi

Nkọwapụta nka nka

• Ọkụ ọkụ Site na modul isi site na ụgbọ ala ime
• Oke. ike oriri 0.5 W
• Ntinye aka voltage 100 .. 240 V AC, 50/60 Hz
• Kachasị arụ ọrụ ugbu a 4A
• SW-akọwapụtara opekempe mgbụsị akwụkwọ1 20 s
• Fuse 4 A (T-eji nwayọọ), 250 V, Cartridge fuse 5 × 20 mm
• Njikọ ụdị ịghasa ụdị njikọ maka eriri eriri 0.75 ka 2.5 mm2
• Akụkụ (L x W x H) 90 x 18 x 60 mm
• Ibu 70 g
• Ambient okpomọkụ 0 ruo 50 Celsius
• iru mmiri nke ukwuu. 95%, enweghị condensation
• Oke kacha elu 2000 m
• Ọkwa nkwụnye kwụ ọtọ
• Ụgbọ njem na nchekwa okpomọkụ -20 ruo 60 Celsius
• ogo mmetọ 2
• Mfefetage ụdị II
• Ngwa eletriki Klas II (mkpuchi okpukpu abụọ)
• Klas nchekwa IP30

MỤLỤ MODULE

Labelụ (sample):

XXX-N.ZZZ
P/N: AAABBBCCDDDEEE
S/N: SSS-RR-YYXXXXXXXXX
D/C: WW/YY

Nkọwa akara:

1. XXX-N.ZZZ - aha ngwaahịa zuru oke.
   • XXX-N - Ezinụlọ ngwaahịa
   • ZZZ - ngwaahịa
2. P/N: AAABBBCCDDDEEE - nọmba akụkụ.
   • AAA - koodu izugbe maka ezinụlọ ngwaahịa,
   • BBB - aha ngwaahịa dị mkpụmkpụ,
   • CCDDD - koodu usoro,
   • CC - afọ nke imeghe koodu,
   • DDD - koodu mmepụta,
   • EEE – koodu ụdị (dobere maka nkwalite HW na/ma ọ bụ SW n'ọdịnihu).
3. S/N: SSS-RR-YYXXXXXXXXX - nọmba nsonazụ.
   • SSS - aha ngwaahịa dị mkpụmkpụ,
   • RR - koodu njirimara (usoro ule, dịka Smarteh onye xxx),
   • YY - afọ,
     ◦ XXXXXXXXX - nọmba nchịkọta dị ugbu a.
4. D/C: WW/YY - koodu ụbọchị.
   • WW - izu na
   • YY - afọ mmepụta.

Nhọrọ

1. MAC
2. Akara
3. WAMP
4. Ndị ọzọ

Mgbanwe

Tebụl na-esonụ na-akọwa mgbanwe niile na akwụkwọ ahụ.

Ụbọchị	V.	Nkọwa
10.05.24	1	Ụdị nke mbụ, nyere dị ka LPC-2.DX1 modul Onye ọrụ ntuziaka.

Akwụkwọ / akụrụngwa

SMARTEH LPC-2.DX1 Longo njikwa mmemme [pdf] Akwụkwọ ntuziaka onye ọrụ LPC-2.DX1 Longo Programmable Controller, LPC-2.DX1, Longo Programmable Controller, Programmable Controller, Controller

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ