Ntuziaka Ngwa Ntuchi Slime Tube

slime Tube Patch Kit

Ntuziaka ojiji ngwaahịa

• Nzọụkwụ 1
  • Use the scuffer to lightly scuff the area around the puncture.
  • The area to be covered by the patch should feel rough to the touch.
• Nzọụkwụ 2
  • Apply rubber cement onto the roughened surface.
  • Gently work the rubber cement into the tube, spreading it evenly and scraping off any excess.
• Nzọụkwụ 3
  • Remove the foil backing from the patch without touching the sticky surface.
• Nzọụkwụ 4
  • Apply the patch (sticky side down) centered over the puncture and press firmly, especially around the edges.
• Nzọụkwụ 5
  • Remove the clear plastic film and wait for the rubber cement to fully dry before reinflating your tube to the recommended pressure.

Ozi ndị ọzọ