Akwụkwọ ntuziaka onye ọrụ dị iche iche nke Sindoh D332A

Sindoh-D332A-Multi-Function-Peripherals-featured

Sindoh-logo

Akụkụ dị iche iche nke Sindoh D332A

Sindoh-D332A-Otutu-ọrụ-Mpụta-

Akụkụ nhọrọ

Ndepụta akụrụngwa nhọrọ Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-1

Mba. Aha Nkọwa
1 Isi nkeji Na-enyocha ihe izizi dị na ngalaba nyocha, wee bipụta onyonyo enyochagoro na ngalaba nbipute. A na-akpọ nkeji a "igwe a" or "isi unit" na ntuziaka.
2 Mkpuchi mbụ OC-513 A na-eji emezi ihe izizi ebugoro.
3 Weghachite akwụkwọ nri akpaaka DF-633 Na-enye nri na akpaghị aka na nyocha site na ibe. Nkeji a na-atụgharị ma na-enyocha ihe izizi nwere akụkụ abụọ. A na-akpọ nkeji a dị ka ADF na ntuziaka.
4 Ngwa fax FK-513 Ejiri igwe a rụọ ọrụ dị ka igwe fax.

Mgbe ị na-eji igwe a dị ka igwe fax, nhọrọ

Ngalaba ebe nchekwa gbasaara a ga-etinyekwa n'igwe a.
5 Nkeji dị ọcha CU-101 Na-anakọta ụmụ irighiri ihe (UFP) emepụtara n'igwe a ka ha ghara ịgbanarị igwe a. Nke Ugwu Kit MK-748 achọrọ uhie iji wụnye ya Nkeji dị ọcha CU-101.
6 Ugwu Kit MK-748 Nke a unit a chọrọ iji wụnye Nkeji dị ọcha CU-101.
Mba. Aha Nkọwa
7 Ngalaba nyocha AU-102 Na-eme nnwapụta onye ọrụ site na inyocha usoro akwara dị na mkpịsị aka. Nke Tebụl ọrụ WT-515 achọrọ iji wụnye ya Ngalaba nyocha AU-102.

Iji wụnye, ndị Ngwa Interface Mpaghara EK-608 ma ọ bụ Interface Mpaghara Akụkụ EK-609 ihe achọrọ.
8 Ngalaba nyocha AU-201S Na-eme nyocha onye ọrụ site na nyocha ozi edere na kaadị IC ma ọ bụ NFC gam akporo dakọtara.

Nke Ugwu Kit MK-735 achọrọ iji wụnye ya Ngalaba nyocha AU-201S. Nke a unit nwekwara ike arụnyere na Tebụl ọrụ WT-515.

Iji wụnye, ndị Ngwa Interface Mpaghara EK-608 or Ngwa Interface Mpaghara EK-609 ihe achọrọ.
9 Tebụl ọrụ WT-515 A na-eji nke a eme ihe mgbe emechara Ngalaba nyocha AU-102 or

Ngalaba nyocha AU-201S arụnyere.
10 Ahụigodo KP-101 A kwadebere ya n'akụkụ nke Ogwe njikwa.

Na-enye gị ohere iji igwe a rụọ ọrụ ma ọ bụ tinye nọmba site na iji igodo siri ike.
11 Ụlọ ọrụ DK-518 Ejiri iji wụnye igwe a n'ala.
12 Akwụkwọ nri Cabinet PC-418 Na-enye gị ohere ibu ihe ruru 2500 mpempe akwụkwọ nke 8-1/2 e 11 (A4) nha.
13 Akwụkwọ nri Cabinet PC-218 Na-enye gị ohere ịkwanye ihe ruru mpempe akwụkwọ 500 n'otu n'otu n'ime traị elu na ala.
14 Akwụkwọ nri Cabinet PC-118 Na-enye gị ohere ịkwanye ihe ruru 500 mpempe akwụkwọ n'elu tray dị n'elu wee jiri tray ala dị ka igbe nchekwa.
15 Onye nchacha FS-539 Ụdị, otu na staples ebipụtara akwụkwọ tupu iwepụta ya.

Iji wụnye Onye nchacha FS-539, nke Nkeji agbagharị RU-514 na Ugwu Kit MK-603 achọrọ. Na mgbakwunye, ndị Mpempe akwụkwọ nri PC- 118, PC-218, or PC-418 or Ụlọ ọrụ DK-518 a ga-etinyerịrị na nke a

igwe.
16 Finisher FS-539 SD Hazie, otu, staples, folds, na kechie akwụkwọ ebipụtara tupu iwepụta ya. Iji wụnye Finisher FS-539 SD, nke Nkeji agbagharị RU-514 na Ugwu Kit MK-603 achọrọ. Na mgbakwunye, ndị Akwụkwọ nri Cabinet PC-118, PC-218, ma ọ bụ PC-418 or Ụlọ ọrụ DK-518 a ga-etinyerịrị n'igwe a.
17 Ngwa Punch PK-524 Wụnye unit a na Finisher FS-539/FS-539 SD. Nkeji a na-akwado ọrụ ịkụ ọkpọ.
18 Nkeji agbagharị RU-514 Nke a unit a chọrọ iji wụnye Finisher FS-539/FS-539 SD na igwe a.
19 Onye nchacha FS-533 Wụnye nkeji a n'elu traị mmepụta nke igwe a.

Ụdị, otu na staples ebipụtara akwụkwọ tupu iwepụta ya.

Nke Ugwu Kit MK-602 na Ugwu Kit MK-603 achọrọ ka itinye ya Onye nchacha FS-533.
20 Ugwu Kit MK-602 Nke a unit a chọrọ iji wụnye Onye nchacha FS-533.
Mba. Aha Nkọwa
21 Ngwa Punch PK-519 Wụnye unit a na Onye nchacha FS-533. Nkeji a na-akwado ọrụ ịkụ ọkpọ.
22 Onye na-eke ọrụ JS-506 Wụnye nkeji a n'elu traị mmepụta nke igwe a. Nkeji a na-ahazi mpempe akwụkwọ ebipụtara.

Nke Ugwu Kit MK-603 achọrọ iji wụnye ya Onye na-eke ọrụ JS-506.
23 Ugwu Kit MK-603 Nke a unit a chọrọ iji wụnye Finisher FS-539/FS-539 SD/FS- 533 or Onye na-eke ọrụ JS-506 na igwe a.
Ndepụta akụrụngwa nhọrọ ndị ọzọ

A na-ewu nhọrọ ndị a n'ime igwe a ma egosighi ya na foto a.

Mba. Aha Nkọwa
1 Ngwa Interface Mpaghara EK-608 Wụnye nkeji a mgbe ị na-eji ọrụ nduzi olu. A na-agbakwunye igwe okwu na ọdụ ụgbọ USB.
2 Ngwa Interface Mpaghara EK-609 Wụnye otu a mgbe ị na-eji ọrụ ntụzịaka olu ma ọ bụ ọrụ njikọ ya na ọdụ Bluetooth LE dakọtara na iOS.

Agbakwunyere igwe okwu, ọdụ ụgbọ USB, na ngwaọrụ nnata maka nzikọrịta ozi Bluetooth LE.
3 i-Nhọrọ LK-102 Na-enye gị ohere ịgbakwunye ọrụ nhazi PDF.
4 i-Nhọrọ LK-104 Na-enye gị ohere ịgbakwunye ọrụ nduzi olu.
5 i-Nhọrọ LK-105 Na-enye gị ohere ịgbakwunye ọrụ PDF enwere ike ịchọ.
6 i-Nhọrọ LK-106 A na-eji ya gbakwunye mkpụrụedemede koodu mmanya bụ otu n'ime mkpụrụedemede pụrụ iche.
7 i-Nhọrọ LK-107 A na-eji tinye mkpụrụedemede Unicode bụ otu n'ime mkpụrụedemede pụrụ iche.
8 i-Nhọrọ LK-108 Eji gbakwunye mkpụrụedemede OCR bụ otu n'ime mkpụrụedemede pụrụ iche.

N'ọkọlọtọ, mkpụrụedemede OCR-B (PostScript) dị. Ịwụnye nhọrọ a na-enye ohere iji font OCR-A (PCL).
9 i-Nhọrọ LK-110 Na-enye gị ohere ịtụgharị a file n'ime ụdị DOCX ma ọ bụ XLSX ma ọ bụ mepụta ọrụ dị elu yana ọrụ nrụpụta data dị elu.

Nhọrọ a gụnyere ikikere ọrụ maka i-Nhọrọ LK-102 na i- Nhọrọ LK-105. Ịzụta nhọrọ a, ịkwesighi ịzụrụ i-Nhọrọ LK-102 na i-Nhọrọ LK-105.

Maka nkọwa gbasara ọrụ enwere ike ịgbakwunye, rụtụ aka na ntuziaka onye ọrụ HTML.
10 i-Nhọrọ LK-111 Na-enye gị ohere ịgbakwunye ọrụ ThinPrint.
11 i-Nhọrọ LK-114 Na-enye gị ohere itinye ọrụ obibi akwụkwọ ndọta enweghị ihe nkesa.
12 i-Nhọrọ LK-115 Na-enye gị ohere itinye TPM (Trusted Platform Module). A na-enweta nkwalite nchekwa site na izochi ozi nzuzo dịka asambodo na okwuntughe nke igwe a.
13 i-Nhọrọ LK-116 Na-enye gị ohere ịgbakwunye ọrụ nyocha nje virus.
Mba. Aha Nkọwa
14 i-Nhọrọ LK-117 Na-enye gị ohere ịgbakwunye ọrụ fax IP (SIP).
15 Nweta nkwalite Kit UK-221 Na-enye gị ohere iji igwe a na gburugburu netwọk ikuku.
16 Igwe ọkụ HT-509 Na-egbochi mpempe akwụkwọ dị na tray akwụkwọ iru mmiri na-emetụta ya. Enwere ike ịwụnye Heater HT-509 mgbe ịzụtara Cabinet Feed Paper PC-118, PC-218, ma ọ bụ PC-418.
17 Igbe Ike MK-734 Ejiri ya gbanye ma ọ bụ gbanyụọ ọrụ Heater HT-509 maka kabinet ndepụta akwụkwọ. Nke Igbe Ike MK-73Enwere ike itinye 4 mgbe ịzụrụ ihe Akwụkwọ nri Cabinet PC-118, PC-218 or PC-418 or Ụlọ ọrụ DK-518.
18 Ugwu Kit MK-735 Achọrọ inwe Ngalaba nyocha AU-201S wuru na isi unit.
19 Ngalaba ebe nchekwa gbasaara EM-907 A na-eji iji bulie ikike nchekwa iji gbakwunye ọrụ.

Aha akụrụngwa nke ọ bụla (isi unit)

N'ihu
Ọnụọgụ a na-egosi ngalaba nke nwere Reverse Automatic Document feeder DF-633. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-2

Mba. Aha Nkọwa
1 Weghachite akwụkwọ nri akpaaka Na-enye nri na akpaghị aka site na ibe.

Nkeji a na-atụgharị ma na-enyocha ihe izizi nwere akụkụ abụọ. A na-akpọ nkeji a dị ka ADF na akwụkwọ ntuziaka.
2 Mwepu mkpuchi aka ekpe Eji meghee mkpuchi aka ekpe.
3 Mkpuchi aka ekpe Mepee mkpuchi aka ekpe mgbe ị na-ehichapụ jam akwụkwọ.
4 Nduzi n'akụkụ Gbanwee ntuziaka a n'akụkụ obosara nke mbụ.
5 Tray izizi Budata ihu mbụ n'ime traị a.
6 Tray mmepụta izizi A na-ewepụta ihe izizi nyochara na traị a.
7 Ogwe njikwa A na-eji hazie ntọala dị iche iche na igwe a.
8 Stylus Pen A na-eji họrọ menu na Panel aka, ma ọ bụ tinye mkpụrụedemede.
9 Ọdụ ụgbọ mmiri USB (Ụdị A) USB2.0/1.1 Eji jikọọ eriri USB na igwe a.
10 Ọnụ ụzọ aka nri Mepee ụzọ a iji kpochapụ jam akwụkwọ.
11 Tray gafere A na-eji ya bipụta data na mpempe akwụkwọ na-adịghị agafe agafe, akwụkwọ gbara ọkpụrụkpụ, ntụgharị okwu, kaadị ozi (4 e 6 (Kaadị A6)), envelopu, ma ọ bụ mpempe akwụkwọ.
12 Mpempe mwepu ụzọ aka nri A na-eji akpọchi ụzọ ziri ezi.
13 Isi Ike Gbanye Pịa mgba ọkụ a ka ịgbanwuo ma ọ bụ gbanyụọ igwe.
14 Mpempe akwụkwọ 1, tray 2 Na-enye gị ohere ibu ihe ruru 500 mpempe akwụkwọ nkịtị.
15 Ọnụ ụzọ ihu Mepee ụzọ a iji dochie Toner Cartridge, Waste Toner Box, ma ọ bụ Drum Unit, na iji hichaa iko Bipụta Isi.
16 Mpaghara Touch Mobile A na-eji mpaghara a na-ejikọta igwe a na njedebe gam akporo NFC dakọtara ma ọ bụ ọdụ iOS dakọtara na Bluetooth LE.
17 Igodo ike Na-atụgharị igwe a na ọnọdụ nchekwa ike.

Akụkụ/azụ
Ihe atụ a na-egosi akụkụ bụ isi nwere Reverse Automatic Document Feeder DF-633 na Fax Kit FK-513. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-3

Mba. Aha Nkọwa
1 Ụdọ ọkụ Eji enye ike n'igwe a.
2 Ọdụ ụgbọ mmiri USB (ụdị B) USB2.0/1.1 Jikọọ na ọdụ ụgbọ mmiri a mgbe ị na-eji igwe a dị ka ngwa nbipute ejikọrọ USB.
3 Njikọ netwọk (10Base-T/100Base- TX/1000Base-T) Jikọọ na ọdụ ụgbọ mmiri a mgbe ị na-eji igwe a dị ka ngwa nbipute netwọk ma ọ bụ nyocha netwọkụ.
4 Jack maka ijikọ ekwentị (TELPORT1) Eji jikọọ eriri ekwentị.
5 Ekwentị Jack 1 (LINE PORT1) Ejiri iji jikọọ ahịrị ndị debanyere aha ekwentị n'ozuzu.

Ndụmọdụ
Ọdụ ụgbọ mmiri nke ngwaahịa a na-agbaso No.2 na No.3. A na-arụ ọrụ ọdụ ụgbọ mmiri mgbe ọdụ ụgbọ mmiri na-etinye eriri.

Ịnye ọkụ

Igwe a na-enye isi ọkụ ọkụ na igodo ọkụ. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-4

Mba. Aha Nkọwa
1 Isi Ike Gbanye Na-agbanye ma ọ bụ gbanyụọ isi ike igwe a. Maka nkọwa gbasara otu esi agbanyụ ma ọ bụ gbanyụọ isi ike, rụtụ aka na peeji nke 17.
2 Igodo ike Na-atụgharị igwe a na ọnọdụ nchekwa ike.

Ọrụ a na-ebelata

oriri ike ma nwee mmetụta nchekwa ike ka ukwuu.

Maka nkọwa gbasara otu esi eji igodo ike, rụtụ aka na ntuziaka onye ọrụ HTML.

Mara

  • Mgbe ị na-ebi akwụkwọ, agbanyụla ọkụ isi ma ọ bụ pịa igodo ọkụ. Ma ọ bụghị ya, ọ nwere ike iduga jam akwụkwọ.
  • Ọ bụrụ na agbanyụrụ Main Power Switch ma ọ bụ pịa igodo ọkụ ka igwe a na-arụ ọrụ, sistemụ ahụ na-ehichapụ data nke etinyere ugbu a ma ọ bụ na-ekwurịta okwu yana ọrụ ndị kwụ n'ahịrị.

Na-agbanye ike ma gbanyụọ 

  1. Mgbe ị na-agbanye isi ike, pịa nke Mgba ọkụ Main.
    Igodo mmalite na-enwu na oroma, na ihuenyo mmalite na-egosipụta na Touch Panel.
  2. Mgbe ị na-agbanyụ isi ike, pịa nke Main Power Switch.
    Mara Mgbe ị na-amalitegharị igwe a, gbanyụọ Main Power Switch ma gbanye ọzọ ka sekọn 10 ma ọ bụ karịa gafere. Emeghị otu a nwere ike bute ọdịda ọrụ.

Banyere Panel

Ogwe njikwa Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-6

Mba. Aha Nkọwa
1 Ogwe aka Na-egosiputa ihuenyo ntọala na ozi. Pịa panel ozugbo ka ọ rụọ ọrụ.
2 Mpaghara Touch Mobile A na-eji mpaghara a na-ejikọta igwe a na njedebe gam akporo NFC dakọtara ma ọ bụ ọdụ iOS dakọtara na Bluetooth LE.
3 Malite Pịa igodo a ka ịmalite ọrụ dịka mbipụta.
4 Kwụsị Pịa igodo a ka ịkwụsị ọrụ mbipụta na-arụ ọrụ nwa oge.

● Ka ịmalitegharịa, pịa Malite igodo.

● Ka ihichapụ, họrọ ọrụ ebumnuche na ihuenyo akwụsịla ugbu a, na

kpatụkwa [Hichapụ].
5 Tọgharia Weghachite ntọala nke itinyere ma ọ bụ gbanwee na ndabara.
6 Nweta Jiri igodo a rụọ nyocha na ihuenyo nbanye ma ọ bụrụ na etinyere njirimara onye ọrụ ma ọ bụ egwu akaụntụ n'igwe a.

Na ịpị Nweta igodo mgbe ịbanye ga-ewepụ gị na igwe a.
7 Ụlọ Na-egosiputa ihuenyo ụlọ.
8 Ike igodo Na-atụgharị igwe a na ọnọdụ nchekwa ike. Maka nkọwa gbasara otu esi eji Ike igodo, rụtụ aka na ntuziaka onye ọrụ HTML.
9 Ihe ngosi ịdọ aka na ntị Na-egosi ọkwa igwe a site na lamp agba, na-egbuke egbuke, ma ọ bụ a

lamp na-enwu ọkụ.

● Flash (oroma): ịdọ aka ná ntị

● Light-up (oroma): Akwụsịla igwe.
Ogwe aka

Ihuenyo mbu
Nhazi nke ihuenyo ụlọ bụ nke a. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-7

Mba. Aha Nkọwa
1 Aha njirimara/Akaụntụ Egosipụtara mgbe agbanyere njirimara onye ọrụ na egwu akaụntụ. Imepe mpaghara aka ekpe na-egosiputa aha onye ọrụ nbanye ugbu a ma ọ bụ aha akaụntụ.

Ịpị akaSindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-8 na-apụ apụ.
2 [Ndepụta ọrụ] Na-egosiputa ọrụ nọ n'ọrụ ma ọ bụ nọrọ njikere. Ọ bụrụ na ọ dị mkpa, ịnwere ike ịlele ndekọ ọrụ ma ọ bụ bipụta akụkọ nzikọrịta ozi.

Ndepụta a na-egosiputa ọkwa ọrụ nke ọrụ dị ugbu a na igodo [Ndepụta Job] mgbe ọ na-agba ọsọ. Ọ bụrụ na ọ dị mkpa, ịnwere ike ịkwụsị ọrụ na-arụ ọrụ site na iji igodo nkwụsị egosiri n'akụkụ [Ndepụta ọrụ] igodo.
3 Ngosi ngosi Ị nwere ike ịlele ịdọ aka ná ntị ma ọ bụ ọkwa gbasara ọkwa nke igwe a.
4 Akara ngosi ngwaọrụ Ị nwere ike ịlele ụbọchị na oge dị ugbu a, ohere efu na ebe nchekwa yana ọkwa toner.

A na-egosipụta ozi ngwaọrụ kwekọrọ mgbe:

● Ejikọrọ draịva USB na-abụghị ọkọlọtọ na igwe a;

● A na-akụda ndekọ ozi ngwaọrụ;

● A na-ebufe ndekọ ihe oyiyi;

● Igwe a nọ na faksị redial nchere;

● Igwe a na-enweta data;

● Igwe a na-eziga data;

● Njehie njikọ nke ihe nkesa E-mail (POP) pụtara; ma ọ bụ

● Agbanyere ọnọdụ nchekwa emelitere.
5 Ihe omuma nke ihe omuma Na-egosiputa ozi maka ndị ọrụ.
6 igodo ọrụ Na-egosiputa igodo ụzọ mkpirisi ekenyere ọrụ ọ bụla.
7 Ihe ngosi Peeji Ị nwere ike ịlele nọmba ibe egosipụtara ugbu a.
Mba. Aha Nkọwa
8 Mpaghara aka ekpe mepere/ mechie akara ngosi Mepee ma ọ bụ mechie mpaghara aka ekpe.

Imepe mpaghara aka ekpe na-egosiputa aha akara ngosi dị na mpaghara aka ekpe.
9 [Hazie ihuenyo ụlọ] Na-edozi igodo ọrụ ka ọ gosipụta na ihuenyo ụlọ.
10 [Asụsụ] Na-agbanwe asụsụ a ga-egosipụta na panel nwa oge. A na-egosipụta nhọrọ a mgbe [Gbanwee Asụsụ nwa oge] atọrọ na ON.
11 [Utility] Hazie ntọala igwe a ma ọ bụ lelee ọkwa ojiji nke igwe a.

Ụzọ nbanye

Mgbe agbanyere njirimara onye ọrụ:
Mgbe agbanyere njirimara onye ọrụ na igwe a, a ga-egosipụta ihuenyo nbanye. Tinye aha njirimara na paswọọdụ, wee mee nyocha njirimara.

  • Ọdịnaya nke ihuenyo nbanye nwere ike ịdị iche dabere na ntọala nyocha
    nke igwe a.
  • Ọ bụrụ na agbanyere ohere ọhaneze (ndị ọrụ na-edebanyeghị aha), ị nwere ike pịa [Onye ọrụ ọha na-eji] na ihuenyo nbanye iji rụọ ọrụ igwe a na-enweghị nyocha.
  1. Tinye aha njirimara na paswọọdụ. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-9
  2. Mgbe egosiri [Aha ihe nkesa], họrọ ihe nkesa iji mee nyocha.
    A na-ahọrọ ihe nkesa nyocha ndabara na ndabara.
  3. Mgbe egosiri [Operation Rights], họrọ ikike ọrụ onye ọrụ nbanye.
    • Ka ịbanye dịka onye ọrụ edebanyere aha, họrọ [Onye ọrụ].
    • Ka ịbanye dị ka onye nchịkwa, họrọ [Administrator].
    • Iji banye dị ka onye nchịkwa igbe onye ọrụ, họrọ [Onye nchịkwa igbe onye ọrụ].
  4. Mgbe egosiri [Ụzọ nyocha], họrọ usoro nyocha.
  5. Pịa [Nbanye].
    Mgbe nyocha ga-aga nke ọma, ịnwere ike iji igwe a rụọ ọrụ. Aha njirimara na-egosipụta na ihuenyo mgbe nbanye. Ọ bụrụ na egosiri ihuenyo nbanye maka egwu akaụntụ, mee egwu akaụntụ mgbe nke a gasịrị. Maka nkọwa gbasara ọrụ egwu akaụntụ, rụtụ aka na ibe 21.
  6. Mgbe arụchara ọrụ ebumnuche, họrọSindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-8 ịpụ.
    • Ọ bụrụ na ahapụ igwe a ruo oge ụfọdụ n'oge nbanye (ndabere: [1] min.), ị na-apụ na-akpaghị aka.
  7. Pịa [Ee] na ihuenyo nkwenye ọpụpụ.

Mgbe agbanyere egwu akaụntụ:
Mgbe egwu akaụntụ gbanyere na igwe a, ihuenyo nbanye ga-egosipụta. Tinye aha akaụntụ na paswọọdụ ịme egwu akaụntụ.

  • Ọdịnaya nke ihuenyo nbanye nwere ike ịdị iche dabere na ntọala nyocha nke igwe a.
  1. Tinye aha akaụntụ na paswọọdụ.
    • Mgbe ị na-eme egwu akaụntụ site na iji naanị paswọọdụ, igodo ahụ ga-egosipụta na ihuenyo nbanye. Ọ bụrụ na paswọọdụ bụ ọnụọgụ naanị, ọ ga-ekwe omume iji ahụ igodo tinye paswọọdụ. Ọ bụrụ na paswọọdụ nwere agwa, kpatụ mpaghara ntinye [Paswọdu] wee tinye paswọọdụ. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-10
  2. Pịa [Nbanye].
    Mgbe nyocha ga-aga nke ọma, ịnwere ike iji igwe a rụọ ọrụ. A na-egosipụta aha akaụntụ ahụ na ihuenyo n'oge usoro nbanye. Mgbe agbanyere njirimara onye ọrụ na egwu akaụntụ ọnụ, aha njirimara ga-egosipụta na ihuenyo.
  3. Mgbe arụchara ọrụ ebumnuche, họrọSindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-8 ịpụ.
    •  Ọ bụrụ na ahapụ igwe a ruo oge ụfọdụ n'oge nbanye (ndabere: [1] min.), ị na-apụ na-akpaghị aka.
  4. Pịa [Ee] na ihuenyo nkwenye ọpụpụ.

Na-ebunye nke mbụ na akwụkwọ

Budata nke mbụ

A na-ekewa ụzọ ntinye mbụ n'ime ụdị abụọ: ibunye nke mbụ n'ime ADF (Automa-tic Document Feeder), na na-ebunye nke mbụ na Glass Original.
Họrọ nke dabara adaba maka ihe ị chọrọ.

Na-ebunye nke mbụ n'ime ADF
Ọrụ a bara uru mgbe ịchọrọ inyocha ihe izizi nwere ọtụtụ ibe, ma ọ bụ mpempe akwụkwọ izizi nke nha dị iche iche.

  • Debe ibe mbụ ka nke mbụ wee nọrọ n'elu.
  • Jiri akụkụ nyocha chere ihu n'elu buru ibu nke mbụ.
  • Gaa na ntuziaka mpụta ka ọ dabara nha mbụ. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-11

1.2 Ịtụkwasị ihe mbụ na Glass Original

Ọrụ a bara uru mgbe ịchọrọ iṅomi obere ihe mbụ dị ka akwụkwọ, akwụkwọ akụkọ, ma ọ bụ kaadị azụmahịa.

  • Debe nke mbụ na akụkụ nyocha chere ihu ala.
  • Hazie nke mbụ ya na akara dị n'azụ aka ekpe nke Glass izizi. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-12
Na-adọnye akwụkwọ

Enweghị ntọala akwụkwọ achọrọ n'ihi na a na-ebunye akwụkwọ a na-ejikarị eme ihe mgbe a na-eji ya eme ihe. Akụkụ a na-akọwa otu esi eji akwụkwọ na-adịghị etinyekarị na tray akwụkwọ.
Ụzọ e si ebubata envelopu, akwụkwọ ozi, mpempe akwụkwọ, na akwụkwọ ndeksi bụ ndị a.

 Na-ebunye akwụkwọ na Tray 1 gaa na Tray 2

Enwere ike ịkwanye ihe ruru mpempe akwụkwọ 500 n'ime traị ọ bụla.

Ụdị akwụkwọ ọdabara
Akwụkwọ dị larịị, akwụkwọ nwere naanị otu akụkụ, akwụkwọ pụrụ iche, akwụkwọ gbara ọkpụrụkpụ, isi mkpụrụedemede, akwụkwọ nwere agba, akwụkwọ emegharịrị

Otu esi ebu akwụkwọ

  1. Wepụ traị ahụ.Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-13
    Mara - Kpachara anya ka ị ghara imetụ ihe nkiri ahụ aka.
  2. Gaa na ntuziaka mpụta ka ọ dabara nha nke akwụkwọ a kwajuru.Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-14
  3. Bunye akwụkwọ n'ime traị ahụ ka akụkụ mbipụta chere ihu n'elu. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-15
  4. Mgbe ị na-etinye akwụkwọ na-abụghị akwụkwọ nkịtị, kọwaa ụdị akwụkwọ ahụ.
    • Maka nkọwa gbasara otu esi akọwapụta ụdị akwụkwọ, rụtụ aka na ntuziaka onye ọrụ HTML.

Na-ebunye akwụkwọ n'ime tray Bypass

Mgbe ị na-ahọrọ nha akwụkwọ na-abụghị maka tray akwụkwọ ma ọ bụ ibipụta na envelopu ma ọ bụ transparencies, jiri Tray Bypass. Iji jiri Tray Bypass, kọwaa ụdị akwụkwọ na nha akwụkwọ.

Ụdị akwụkwọ ọdabara
Akwụkwọ dị larịị, akwụkwọ naanị otu akụkụ, akwụkwọ pụrụ iche, akwụkwọ gbara ọkpụrụkpụ, kaadị ozi (4 e 6 (A6 Card)), akwụkwọ ozi transparen, isi akwụkwọ ozi, akwụkwọ nwere agba, envelopu, mpempe akwụkwọ akara, akwụkwọ ndeksi, akwụkwọ emegharịrị, na akwụkwọ ọkọlọtọ.

Otu esi ebu akwụkwọ

  1. Mepee tray Bypass. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-16
    Ka ibunye akwụkwọ buru ibu, wepụ ihe ndọtị ahụ.
    Mara - Kpachara anya ka ị ghara iji aka gị emetụ elu elu akwụkwọ nri.
  2. Jikwaa akwụkwọ n'akụkụ ebipụta chere ihu ala, wee kwadoo Nduzi Lateral na akwụkwọ ahụ.
    • Fanye akwụkwọ n'ime tray ahụ ruo mgbe a na-agbanye akụkụ ha n'azụ. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-17
      Mara - Ejila ọnụ ọgụgụ dị ukwuu nke mpempe akwụkwọ nke mere na elu nke nchịkọta ahụ dị elu karịa , akara. Ọ bụrụ na akwụkwọ bụ curled, gbatuo ya tupu ebugo ya.
  3. Ezipụta ụdị akwụkwọ na nha akwụkwọ.
    • Maka nkọwa gbasara otu esi akọwapụta ụdị akwụkwọ na nha akwụkwọ, rụtụ aka na ntuziaka onye ọrụ HTML.

Na-ebunye envelopu
Akpachara anya mgbe ị na-eji envelopu

  • Wepu ikuku na envelopu, wee pịa na nchekwa n'akụkụ ahịrị mpịaji ahụ.
  • Ejila envelopu nwere gluu ma ọ bụ ntọhapụ akwụkwọ na flaapu ma ọ bụ akụkụ nke flaapu kpuchiri na ahụ.
  • Enweghị ike ibipụta akụkụ mkpọ nke envelopu na ya.
  • Mgbe ị na-ebunye envelopu nwere flaps meghere, họrọkwa nha ọkọlọtọ dabara na ha. Ị gaghị atụle nha nke envelopu ahụ na flap meghere iji tọọ nha dị ka envelopu nwere nha cus tom.Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-18
    Enwere ike itinye ihe ruru envelopu iri n'ime traị.
  • Bugharịa Fusing Adjustment Lever ruo n'ọnọdụ envelopu (n'elu).
  • Ibu ibu envelopu nwere akụkụ flap chere ihu n'elu.
  • Hazie ntuziaka mpụta na nha envelopu.
  • Họrọ nha nke envelopu chọrọ site na [Envelop/4 e6] ([Envelop/A6 Card]) nke [Size akwụkwọ].Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-19
    Mgbe ebipụtachara envelopu, weghachi Fusing Adjustment Lever na ebe obibi akwụkwọ nkịtị (n'okpuru).
    Ịkpachara anya - N'ime ngwaahịa a nwere ebe okpomọkụ dị elu, nke nwere ike ịkpata ọkụ. Mgbe ị na-elele n'ime unit maka malfunctions dị ka akwụkwọ misfeed, emetụla ebe (gburugburu fusing unit, wdg) nke e gosiri site "Akpachara anya HOT" akara. Ọkụ nwere ike ịpụta.

Na-ebu akwụkwọ ozi
Akpachara anya mgbe ị na-eji kaadị ozi

  • Mgbe ị na-ebu curled akwụkwọ ozi, uncurl ha.
  • Mgbe ị na-eji akwụkwọ ozi ndị ọzọ karịa 4 e 6 (Kaadị A6), gosi nha ya, wee họrọ [Size akwụkwọ] -[Nha nkeonwe] iji kọwapụta nha.  Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-20
    Enwere ike itinye akwụkwọ ozi ruru 20 n'ime traị.
  • Buo akwụkwọ ozi ka akụkụ ebipụta chere ihu ala.
  • Hazie ntuziaka mpụta na nha kaadị ozi.
  • Họrọ nha akwụkwọ ozi achọrọ site na [Envelop/4×6] ([Envelop/A6 Card]) nke [Size akwụkwọ]. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-21

Na-ebunye mpempe akwụkwọ
Mpempe mpempe akwụkwọ nwere mpempe akwụkwọ n'ihu (n'akụkụ mbipụta), oyi akwa na-agbatị, na mpempe akwụkwọ (ụdị). Kpochapụ mbadamba nkume ahụ, mgbe ahụ ị nwere ike ịrapara akara na ihe ndị ọzọ. Enwere ike itinye ihe ruru mpempe akwụkwọ 20 n'ime traị ahụ.

  • N'akụkụ ebipụta chere ihu ala, buo mpempe akwụkwọ akara dịka egosiri na foto a.
  • Hazie ntuziaka mpụta na nha mpempe akwụkwọ.
  • Họrọ [Okpokoro 1+] site na [ụdị akwụkwọ].Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-22

Na-ebunye akwụkwọ ndeksi
Enwere ike itinye akwụkwọ ndeksi iri abụọ n'ime traị ahụ.

  • N'akụkụ ebipụta chere ihu ala, dozie akụkụ taabụ dị ka egosiri n'okpuru.
  • Hazie ntuziaka mpụta na nha mpempe akwụkwọ ndeksi.
  • Họrọ [Index Paper] site na [ụdị akwụkwọ]. Sindoh-D332A-Otutu-arụmọrụ-Peripherals-fig-23

Akwụkwọ / akụrụngwa

PDF thumbnailAkụkụ ọtụtụ ọrụ D332A
User Manual · D332A Multi-Function Peripherals, Multi-Function Peripherals, Function Peripherals

Ntụaka

Published: June 22, 2022

Ajụjụ na azịza

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Answered questions

How do I clear a paper jam in the Sindoh D332A?

To clear a paper jam in the Sindoh D332A, you should check the following access points as indicated in the manual:Left Cover: Use the Left Cover Release Lever (located on the side of the...

Read full answer

Ajụjụ & Azịza

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. ถ้ากระดาษติดในตัวเครื่องมีวิธีการแก้ไขอย่างไร

    ฉัตลฎา asks ถ้ากระดาษติดในตัวเครื่องมีวิธีการแก้ไขอย่างไร
    Manuals+ clarified question
    Ajụjụ

    How do I clear a paper jam in the Sindoh D332A?

    Zaa

    To clear a paper jam in the Sindoh D332A, you should check the following access points as indicated in the manual:

    • Left Cover: Use the Left Cover Release Lever (located on the side of the ADF) to open the Left Cover and clear any jammed paper in that section.
    • Ọnụ ụzọ aka nri: Use the Right Door Release Lever to open the Right Door to access and clear paper jams within the main unit.

    Ịdọ aka ná ntị nchekwa dị mkpa: The inside of the machine contains areas subject to high temperatures, particularly around the fusing unit. When clearing a misfeed, do not touch locations marked with a "Caution HOT" label to avoid burns.

    To prevent future jams, ensure you do not turn off the Main Power Switch or press the Power key while the machine is printing.

    Read the full Q&A page

    Zaghachi

Jụọ ajụjụ

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.

Akwụkwọ ntuziaka onye ọrụ Sindoh D330A Multi Function Peripherals Printer
Ọnwa Isii 22, 2022
Akwụkwọ ntuziaka Sindoh N610 A3 Multifunction Printer 220-240 V ntuziaka ntuziaka
Ọnwa Isii 22, 2022
Akwụkwọ ntuziaka onye ọrụ Sindoh TYPES530
Maachị 30, 2022