SMARTEM LPC-3.GOT.112 Onye njikwa mmemme

Ntuziaka ojiji ngwaahịa

• Nwụnye
  • Ihe Ngosi
    • Rụtụ aka na eserese ngọngọ dị n'akwụkwọ ntuziaka onye ọrụ maka nleba anya nke akụkụ na njikọ ngwaọrụ.
  • Ntinye & Mmepụta Njikọ Njikọ
    • Jikọọ ngwaọrụ ntinye na mmepụta na oghere ndị akọwapụtara dị ka akọwapụtara n'akwụkwọ ntuziaka onye ọrụ iji hụ na arụ ọrụ kwesịrị ekwesị.
  • Ntuziaka mgbakwasa
    • Soro ntuziaka nrịgo enyere ka ịwụnye njikwa na nchekwa na ebe ahọpụtara.
  • Ohere ime ala
    • Review nhọrọ ntọ ala dị ma họrọ usoro kwesịrị ekwesị iji hụ na nchekwa eletriki.
• Mmemme Nduzi
  • Nrụrụ ọrụ nke ọma
    • Ghọta ma jiri ọrụ ndị bụ isi nke onye njikwa dị ka akọwapụtara na ngalaba ntuziaka mmemme nke akwụkwọ ntuziaka.
  • Nhazi WiFi
    • Hazie ntọala WiFi na-eso ntuziaka enyere iji mee ka njikọ ikuku nwee ike.
  • Nhazi Ethernet
    • Tọlite ​​njikọ Ethernet site n'ịgbaso usoro nhazi nke edepụtara na ntuziaka.
  • Nhazi na mmemme GUI
    • Mepụta ma hazie ihu onye ọrụ eserese eserese site na iji ntuziaka mmemme akọwapụtara na ntuziaka.
• Nkado modul
  • Rụtụ aka na ngalaba akara modul maka ozi gbasara otu esi akpọ aha na chọpụta akụkụ dị iche iche nke njikwa ahụ.

Ajụjụ

• Ajụjụ: Ndị ọrụ na-enweghị ikike nwere ike ịrụ ọrụ na njikwa ejikọrọ na netwọk AC 100-230 V AC?
  • A: Mba, naanị ndị ọrụ ikike kwesịrị ịrụ ọrụ na ngwaọrụ eletrik na-arụ ọrụ na netwọk 100-230 V AC iji hụ na nchekwa.
• Ajụjụ: Kedu ihe a ga-eme na ngwa eletriki na eletrik (WEEE) n'efu?
  • A: A ghaghị ịnakọta WEEE iche iche maka mkpofu na imegharị ya nke ọma iji belata mmetụta gburugburu ebe obibi.

MKPEBI

• SOM Sistemụ na modul
• ARM Igwe RISC dị elu
• OS Sistemụ nrụọrụ
• TCP Usoro njikwa nnyefe
• SSL Nchekwa oyi akwa sọket
• IEC International Electrotechnical Commission
• COM Nkwukọrịta
• USB Ụgbọ ala serial Universal
• USB Ụgbọ ala serial OTG Universal Na-aga
• PLC Ihe njikwa mgbagha nwere ike ime
• Ikanam diode na-enye ọkụ
• RAM Ebe nchekwa ohere ohere
• NV Na-adịghị agbanwe agbanwe
• PS Ịnye ọkụ
• GUI Orụ ọrụ eserese
• RTU Nkeji ọdụ ụgbọ ala
• RTC Ezigbo oge elekere
• IDE gburugburu mmepe agbakwunyere
• PBF Eserese ngọngọ ọrụ
• LD Eserese ubube
• SFC chaatị ọrụ usoro
• ST Ederede ahaziri
• IL Ndepụta ntuziaka

Nkọwa

• Smarteh LPC-3.GOT.112 Ọnụ ọrụ eserese dabere na PLC na-enye arụmọrụ ka mma yana ọtụtụ atụmatụ ọhụrụ n'ime otu ngwugwu dabere na SOM. Ọnụ ọrụ eserese eserese dabere na ihe nrụpụta ARM na-agba ọsọ OS dabere na Linux na-agbakwunye ike ịgbakọ, njikwa karịa, yana njikọ interface ọzọ na-enye ikike maka nkwalite SOM modul ọdịnihu na-enweghị mgbanwe ngwaike.
• LPC-3.GOT.112 nwere ihe jikọrọ USB mmemme na debugging ọdụ ụgbọ mmiri, njikọ maka Smarteh nwere ọgụgụ isi peripheral modul, abụọ Ethernet ọdụ ụgbọ mmiri, na WiFi Njikọta nke a pụrụ iji dị ka a mmemme na debugging ọdụ ụgbọ mmiri, dị ka a Modbus TCP/IP Master na / ma ọ bụ ohu ngwaọrụ, na dị ka BACnet. IP (B-ASC). LPC-3.GOT.112 nwekwara RS-485 ọdụ ụgbọ mmiri maka Modbus RTU Master ma ọ bụ ohu nkwurịta okwu na ndị ọzọ Modbus RTU akụrụngwa. A na-eme nhazi ngwaike site na iji ngwa mmemme Smarteh IDE, nke a na-eji họrọ ọdụ ọrụ eserese achọrọ.

Akụrụngwa a na-enye gị ntinye dị mfe na asụsụ mmemme IEC dịka:

• Ndepụta ntuziaka (IL)
• Eserese ngọngọ ọrụ (FBD)
• Eserese ubube (LD)
• Ederede ahaziri (ST)
• Chart ọrụ usoro (SFC).

Nke a na-enye ọnụ ọgụgụ buru ibu nke ndị ọrụ dịka:

• Ndị na-arụ ọrụ mgbagha dị ka AND, OR,…
• Ndị na-arụ ọrụ arịthmetic dị ka ADD, MUL,…
• Ndị na-arụ ọrụ atụnyere dị ka <, =,>
• Ndị ọzọ…

A na-eji sọftụwia mmemme mepụta, ihichapụ, nwalee, na idekọ ọrụ. Ọrụ maka nhazi analọgụ, njikwa aka mechiri emechi, yana mgbochi ọrụ dị ka oge na counter na-eme ka mmemme dị mfe. Ngwanrọ mmemme Smarteh IDE na-enyekwa gị ntinye dị mfe na ngwa imewe GUI na-akwado nnukwu njikwa ike sitere na bọtịnụ gaa na egosi ma na-eme ka njikọta n'etiti mmemme PLC na interface onye ọrụ eserese.

Atụmatụ

Tebụl 1: Atụmatụ

• Ihuenyo enyo na-enweghị Frameless nwere 4.3 ″ LCD na ihuenyo mmetụ capacitive,
• landscape or portrait orientation
• Ezigbo modul dabeere na Linux os ARM
• Onye ọrụ nwere onye editọ GUI na ngwa Smarteh IDE chepụtara ihe eserese eserese ahụ
• Njikọ Ethernet & WiFi maka nbipu na mbufe ngwa, Modbus TCP/IP Slave
• (ihe nkesa) na / ma ọ bụ Master (onye ahịa) ọrụ, BACnet IP (B-ASC), web ihe nkesa, na akwụkwọ SSL
• Njikọ Wi-Fi maka antenna mpụga
• USB ọdụ ụgbọ mmiri maka debugging na ngwa nyefe, USB OTG
• Modbus RTU Master ma ọ bụ ohu
• Ụgbọ ala Smarteh maka njikọ na LPC-2 Smarteh modul nwere ọgụgụ isi
• Nnweta dịpụrụ adịpụ yana nyefe ngwa
• RTC na 512 kB NV RAM nwere supercapacitor maka nchekwa ike dị mkpa
• Buzzer arụnyere n'ime ya bụ mmemme PLC na-achịkwa
• Gosi ọkwa nchapụta nke mmemme PLC na-achịkwa
• Ihuenyo ọcha ma ọ bụ ojii
• Ụlọ azụ metal
• Ọnọdụ LED
• Nhazi dị mma

Ịwụnye

Ihe osise ngọngọ

Njikọ ntinye na mmepụta ihe

Tebụl 2: PS1 Ike ọkọnọ1

PS1.1 (+)	+	Ntinye ọkụ, 8 .. 30 V DC, 2 A
PS1.2 (-)	-	GND

Tebụl 3: COM1 RS-4852

• COM1.1 RS-485 (B) Modbus RTU 0 .. 3.3 V
• COM1.2 RS-485 (A) Modbus RTU
• COM1.3 - GND
• COM1.4 +U Mbupute ọkọnọ ike

1. Waya ejikọrọ na modul ga-enwerịrị mpaghara mpaghara opekata mpe 0.75 mm2. Opekempe okpomọkụ nke mkpuchi waya ga-abụrịrị 85 Celsius.
2. Enwere ike ịhọrọ usoro dị iche iche dị ka Modbus RTU Master n'ime Smarteh IDE. Waya ejikọrọ na modul ga-enwerịrị mpaghara akụkụ nke opekata mpe 0.14 mm2. Jiri eriri gbagọrọ agbagọ nke ụdị CAT5+ ma ọ bụ ka mma, a na-atụ aro mkpuchi.

Ntuziaka ntinye

• Mgbanwe Mpụga ma ọ bụ ihe mgbawa okirikiri na ihe nchekwa dị n'èzí: A na-ahapụ unit ahụ ka jikọọ ya na nrụnye yana nchebe dị ugbu a nke nwere uru aha 6 A ma ọ bụ obere. Njikọ niile, Mgbakwụnye PLC, na mgbakọ ga-emerịrị mgbe
• LPC-3.GOT.112 adịghị ejikọrọ na isi ike ọkọnọ. Ekwesịrị idowe modul ahụ na mgbidi n'ime ụlọ ahụ. Zere ìhè anyanwụ kpọmkwem, n'ọnọdu nso ihe ndị na-ekpo ọkụ ma ọ bụ n'okpuru ọkụ ọkụ dị elu maka ịrụ ọrụ kacha mma nke sensọ nọ n'ụgbọ. A ghaghị mechie igbe njikọ na tubes dị na mgbidi iji gbochie ikuku. Okpomọkụ egosiri zuru oke na okpomọkụ ihe ruru. 10 cm n'okpuru modul na 1 cm pụọ na mgbidi. Ogologo nrụnye akwadoro bụ 1.5 m n'elu ọkwa ala. Nhazi eserese nke modul ahụ nwere ike iwepụta mperi mperi na nha okpomọkụ.
• Waya jikọọ na PLC ga-enwerịrị mpaghara cross-section nke opekata mpe 0.75 mm2. Opekempe okpomọkụ nke mkpuchi waya ga-abụrịrị 85 Celsius.

Ntuziaka ntinye n'ọnụ ụzọ mkpuchi

1. Gbanyụọ ọkụ ọkụ.
2. Mee oghere ndị a kpụrụ akpụ na ịkwanye - lee foto 4.
3. Ugwu LPC-3.GOT.112 n'ime bechapụ ma kechie ya na kposara.
4. Jikọọ ike ọkọnọ na nkwurịta okwu wires.
5. Gbanwee ọkụ ọkụ.

Ndabere ohere

Foto 5: Ndabere ohere

LPC-3.GOT.xxx pole ọkọnọ ike na-adịghị mma jikọtara ya na Earthing na-arụ ọrụ nke nchekwa (PE).

LPC-3.GOT.xxx okporo osisi na-enye ike na-adịghị mma anaghị ejikọta ya na Earthing na-arụ ọrụ nke nchebe (PE).

Nkọwapụta nka nka

Tebụl 9: Nkọwa nka na ụzụ

• Enyere ọkụ ọkụ PS1 24 V DC, 2A
• Ike ọkọnọ arụ ọrụ PS1 8 .. 30 V DC
• Oriri ike PS1 max. 5 W
• Ụdị njikọ maka PS1 disconnectable mmiri ụdị njikọ maka strands waya 0.75 ka 1.5 mm2
• Ụdị njikọ maka Ụdị njikọ mmiri nke COM1 na-ewepụ maka eriri eriri 0.14 ruo 1.5 mm2
• Ụdị njikọ maka COM2 RJ-12 6/4
• COM1 RS-485 ọdụ ụgbọ mmiri na-adịghị, 2 waya
• Ụgbọ ala COM2 Smarteh anọghị ya Ethernet RJ-45, 10/100/1000T IEEE 802.3
• WiFi IEEE 802.11 b/g/n, njikọ nwanyị SMA
• Ụdị USB mini B, ọnọdụ ngwaọrụ ma ọ bụ ọnọdụ nnabata (USB On-The-Go), oke ọsọ/ọsọ zuru oke
• RTC capacitor kwadoro ya na njigide nke cca. Ụbọchị 14
• Sistemụ nrụọrụ Linux
• CPU i.MX6 Single (ARM® Cortex™-A9) @ 1GHz
• RAM 1 GB DDR3
• Flash 4GB eMMC 8bits (ụdị MLC)
• NV RAM 512 kB, capacitor kwadoro ya na njigide cca. Ụbọchị 14
• Ngosipụta 4.3 ″, 480 × 272 mkpebi
• LCD viewakụkụ n'akuku (R/L/T/B) 70°/70°/50°/70°
• Akụkụ (L x W x H) 106 x 160 x 39 mm
• Ngosipụta akụkụ (L x W) 54 x 95 mm
• Ibu 650 g
• Ọnọdụ okpomọkụ 0 ruo 50 Celsius
• iru mmiri nke ukwuu. 95%, enweghị condensation
• Oke kachasị elu 2000 m
• Ịkwanye ọnọdụ vetikal
• Ụgbọ njem na ọnọdụ nchekwa -20 ruo 60 Celsius C
• ogo mmetọ 2
• N'elu voltage udi II
• Klas akụrụngwa eletrik II (mkpuchi okpukpu abụọ)
• Klas nchebe n'akụkụ ihu IP65
• Klas nchekwa azụ n'akụkụ IP30

Nduzi mmemme

• Ebumnuche nke isi a bụ ịnye onye mmemme maka ozi ndị ọzọ gbasara ụfọdụ ọrụ na nkeji agbakwunyere n'ọnụ ọnụ ọrụ eserese a.

Ọrụ ndị bụ isi

• Ngalaba RTC
  • Maka nkwado ndabere na mpaghara RTC yana maka ndị na-agbanwe agbanwe enwere Super Capacitor kama etinyere batrị n'ime PLC. N'ụzọ dị otú a, a na-ezere nnọchi nke batrị ewepụrụ. Oge njide bụ opekempe ụbọchị 14 site na mgbada ọkụ. Oge RTC na-enye ozi ụbọchị na oge.
• Ethernet
  • Enwere ike iji ọdụ ụgbọ mmiri ethernet dị ka ọdụ ụgbọ mmiri mmemme na debugging, dị ka Modbus TCP/IP Master na / ma ọ bụ ngwaọrụ ohu, yana BACnet IP (B-ASC).
• WiFi
  • Enwere ike iji ọdụ ụgbọ mmiri WiFi dị ka ọdụ ụgbọ mmiri mmemme na debugging, dị ka Modbus TCP/IP Master na/ma ọ bụ ngwaọrụ ohu, yana BACnet IP (B-ASC).
• Modbus TCP/IP master unit
  • Mgbe ahaziri maka Modbus TCP/IP Master / Client mode, LPC-3.GOT.112 na-arụ ọrụ dị ka ngwaọrụ nna ukwu, na-achịkwa nkwukọrịta na ngwaọrụ ohu ndị ọzọ dị ka sensọ, inverters, PLC ndị ọzọ, wdg LPC-3.GOT. 112 na-ezigara Modbus TCP/IP iwu ma nata nzaghachi Modbus TCP/IP site na nkeji ohu.

A na-akwado iwu ndị a:

• 01 - Gụọ ọnọdụ eriri igwe
• 02 – Gụọ ọnọdụ ntinye
• 03 – Gụọ Jide Ndebanye aha
• 04 – Gụọ ndebanye aha ndenye
• 05 - Dee otu eriri igwe
• 06 - Dee otu ndebanye aha
• 15 - Dee ọtụtụ eriri igwe
• 16 - Dee ọtụtụ ndebanye aha

Mara: nke ọ bụla n'ime iwu ndị a nwere ike ịgụ/dee ruo adreesị 10000.

Modbus TCP/IP ngalaba ohu
Modbus TCP ohu nwere adreesị 10000 na ngalaba ebe nchekwa ọ bụla:

• Ọkụkụ: 00000 ruo 09999
• Ntinye pụrụ iche: 10000 ruo 19999
• Ndebanye aha ntinye: 30000 ruo 39999
• Ndebanye aha na-ejide: 40000 ruo 49999

Na-akwado njikọ ruru 5 na nkeji ohu (akọwara ya na oke MaxRemoteTCPClient). Ọnụ ọgụgụ nyocha kachasị elu bụ 100 ms.

Modbus RTU master unit
Mgbe a haziri maka Modbus RTU Master mode, LPC-3.GOT.112 na-arụ ọrụ dị ka ngwaọrụ nna ukwu, na-achịkwa nkwukọrịta na ngwaọrụ ohu ndị ọzọ dị ka sensọ, inverters, PLC ndị ọzọ, wdg LPC-3.GOT.112 na-eziga Modbus. RTU nyere iwu ma nata nzaghachi Modbus RTU site na ngwaọrụ ohu.

A na-akwado iwu ndị a:

• 01 - Gụọ ọnọdụ eriri igwe
• 02 – Gụọ ọnọdụ ntinye
• 03 – Gụọ Jide Ndebanye aha
• 04 – Gụọ ndebanye aha ndenye
• 05 - Dee otu eriri igwe
• 06 - Dee otu ndebanye aha
• 15 - Dee ọtụtụ eriri igwe
• 16 - Dee ọtụtụ ndebanye aha

Mara: nke ọ bụla n'ime iwu ndị a nwere ike ịgụ/dee ruo 246 bytes nke data. Maka analọgụ (Input and Holding records) nke a pụtara ụkpụrụ 123, ebe maka dijitalụ (Ọnọdụ na Coils) nke a pụtara ụkpụrụ 1968. Mgbe achọrọ oke data dị elu, LPC-3.GOT.112 nwere ike ime ihe ruru 32 otu ma ọ bụ iwu akwadoro n'otu oge.

• oyi akwa anụ ahụ: RS-485
• Ọnụego baud akwadoro: 9600, 19200, 38400, 57600 na 115200bps
• Ịha nhata: Ọ dịghị, Odd, ọbụna.
• Kwụsị ntakịrị: 1

Modbus RTU ohu unit

• Modbus Ohu TCP nwere adreesị 1023 na ngalaba ebe nchekwa ọ bụla:
• Ọkụkụ: 00000 ruo 01023
• Ntinye pụrụ iche: 10000 ruo 11023
• Ndebanye aha ntinye: 30000 ruo 31023
• Ndebanye aha na-ejide: 40000 ruo 41023
• Ọnụ ọgụgụ nyocha kachasị elu bụ 100 ms.

Ụgbọ ala Smarteh RS485 maka njikọta na sistemụ LPC-2

• A na-eji Port COM2 maka nkwukọrịta ya na modul ohu LPC-2. Ahaziri ntọala nzikọrịta ozi niile na mmemme sọftụwia SmartehIDE.

Ngalaba IP BACnet

• Mgbe ahaziri maka BACnet IP (B-ACS), iwu ndị a na-akwado:

Ịkekọrịta data

• ReadProperty-B (DS-RP-B)
• WriteProperty-B (DS-WP-B)

Ngwaọrụ na njikwa netwọkụ

• Ejikọ ngwaọrụ dị egwu-B (DM-DDB-B)
• Ihe na-agbanwe agbanwe-B (DM-DOB-B)
• Njikwa nzikọrịta ngwaọrụ-B (DM-DCC-B)
• Mmekọrịta oge-B (DM-TS-B)
• UTCTimesynchronization-B (DM-UTC-B)
• Maka ozi ndị ọzọ, biko kpọtụrụ onye nrụpụta.

Gbaa/Kwụsị Mgbanwe

• Gbaa ọsọ: Ọnọdụ RUN LED “na” na-egosi na ngwa eserese onye ọrụ dị elu yana mmemme onye ọrụ na-arụ ọrụ.
• Kwụsị: Mgbe agbanwuru ọkụ ahụ na steeti Kwụsị, RUN ọnọdụ LED “gbanyụọ” ma kwụsịchaa ngwa ahụ.

PLC ọrụ okirikiri oge

• Isi oge ọrụ PLC (n'okpuru Project tab -> Resource Tasks Interval) oge → → adịghị atụ aro ka ịtọọ ala karịa 50 ms.

Nhazi WiFi

1. Jikọọ modul na PC site na eriri USB wee gbanye ọkụ ọkụ.
2. In the address bar, type the module’s default IP address: 192.168.45.1 followed by the port number: 8009 (e.g., http://192.168.45.1:8009). Refer to Figure 6: Web interface.
3. Pịa na bọtịnụ "Ntọala" na web interface.
4. The Settings page opens. In the “Network Settings for wlan0 interface (wireless),” section set the parameters of the wireless network to which you want to connect: “Configuration type”, “Authentication type”, “Network name” and “Password”. Refer to Figure 7: Web ntọala interface.
5. Pịa bọtịnụ “Ntọala” na ala nke ngalaba ka itinye mgbanwe ndị ahụ.

Nhazi Ethernet

1. Jikọọ modul na PC site na eriri USB wee gbanye ọkụ ọkụ.
2. Mepee a web ihe nchọgharị na PC gị.
3. In the address bar, type the module’s default IP address: 192.168.45.1 followed by the port number: 8009 (e.g., http://192.168.45.1:8009). Press Enter. Refer to Figure 7: Web ntọala interface.
4. Pịa na bọtịnụ "Ntọala" na web interface.
5. The Settings page will display two sections for configuring network connections (Ethernet and Wi-Fi). The “Network Settings for eth0 interface (wired)” section allows you to set parameters for the module’s RJ45 Ethernet port. Enter the desired network parameters for your specific network configuration. Ethernet port and WiFi must use the same Gateway. So if we select the first port on DHCP, we must set the second one to DHCP (address only). Refer to Figure 7: Web ntọala interface
6. Ozugbo ị haziela ntọala ahụ, jikọọ eriri UTP na ọdụ ụgbọ mmiri achọrọ.
7. Pịa bọtịnụ “Ntọala” na ala nke ngalaba ka itinye mgbanwe ndị ahụ.

GUI imewe na mmemme

Onye ọrụ nwere onye editọ GUI na SmartehIDE (Inkscape 0.92) chepụtara ihe ngosi eserese ahụ.

IHE: A na-atụ aro ka naanị otu Ethernet ma ọ bụ Wifi jikọọ na Smarteh PLC GUI site na iji ihe nchọgharị ịntanetị, guzobe ma jiri ya n'otu oge. Enwere ike ịmepụta njikọ Ethernet ma ọ bụ Wifi atọ n'otu oge.

A na-eme nhazi nke PLC site na iji ngwa ngwa SmartehIDE. Biko rụtụ aka na ntuziaka onye ọrụ SmartehIDE na LPC maka nkọwa.

IHE: Opekempe akwadoro nke ihe mmetụ ahụ bụ 10 x 10 mm.

MỤLỤ MODULE

Nkọwa akara:

1. XXX-N.ZZZ - aha ngwaahịa zuru oke.
   • XXX-N - Ezinụlọ ngwaahịa
   • ZZZ - ngwaahịa
2. P/N: AAABBBCCDDDEEE - nọmba akụkụ.
   • AAA - koodu izugbe maka ezinụlọ ngwaahịa,
   • BBB - aha ngwaahịa dị mkpụmkpụ,
   • CD - koodu usoro,
   • CC - afọ nke imeghe koodu,
   • DDD - koodu mmepụta,
   • EEE – koodu ụdị (dobere maka nkwalite HW na/ma ọ bụ SW n'ọdịnihu).
3. S/N: SSS-RR-YYXXXXXXXXX - nọmba nsonazụ.
   • SSS - aha ngwaahịa dị mkpụmkpụ,
   • RR - koodu njirimara (usoro ule, dịka Smarteh onye xxx),
   • YY - afọ,
   • X- nọmba nchịkọta dị ugbu a.
4. D/C: WW/YY - koodu ụbọchị.
   • WW - izu na
   • YY - afọ mmepụta.

Nhọrọ

1. MAC
2. Akara
3. WAMP
4. Koodu QR
5. Ndị ọzọ

AKỤKỤ MAPỤTARA

Maka ịtụ ngwa mapụtara ndị a ga-eji ọnụọgụ akụkụ:

• LPC-3.GOT.112 Ọnụ ọrụ eserese
  • LPC-3.GOT.112, nwa iko ihuenyo
  • P/N: 226GOT23112B01

Mgbanwe

Tebụl na-esonụ na-akọwa mgbanwe niile na akwụkwọ ahụ.

Ụbọchị	V.	Nkọwa
05.06.24	3	Isi nke 6 emelitere.
19.12.23	2	Ndozigharị akwụkwọ ahụ.
21.09.23	1	Enyere ụdị mbụ dị ka Akwụkwọ ntuziaka LPC-3.GOT.112.

Kpọtụrụ

• SMARTEH doo
• Poljubinj 114
• 5220 Tolmin
• Slovenia
• Tel.: +386 (0) 388 44 00
• ozi-e: info@smarteh.si.
• www.smarteh.si.
• SMARTEH doo dere
• Nwebiisinka © 2023, SMARTEH doo
• Akwụkwọ ntuziaka onye ọrụ
• Ụdị akwụkwọ: 3
• Ọnwa Isii, 2024

Akwụkwọ / akụrụngwa

SMARTEM LPC-3.GOT.112 Onye njikwa mmemme [pdf] Akwụkwọ ntuziaka onye ọrụ LPC-3.GOT.112 Onye njikwa mmemme, LPC-3.GOT.112, njikwa mmemme, njikwa

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ