RICE LAKE 1280 Enterprise Series Programmable arọ egosi na ntuziaka onye ọrụ

If importing from a USB flash drive or SD card and the format does not print properly, do the following:
1. Replace non-human readable characters (NULL – Unit Separator) with a 0-31 ASCII decimal value enclosed by angle brackets () using the Revolution ticket editor.
2. Repeat the process until all non-human readable characters are replaced.
Download configuration to 1280 indicator before printing.

Editing Print Formats with Revolution:

Launch Revolution Software.
Họrọ File > Mepee.
Open the 1280 configuration file containing the print formats.
Select Ticket Formatting > Ticket Editor.
Search each Auxiliary Format for non-human readable ASCII characters.
Replace each non-human readable character with a 0-31 ASCII decimal value enclosed by angle brackets.

Repeat the replacement process until all non-human readable characters are fixed.
Download configuration to 1280 indicator before printing.

View Fullscreen

1280 EnterpriseTM Series Programmable Weight Indicator and Controller
Resolving Print Errors
Product: 1280 Enterprise Series Programmable Weight Indicator and Controller Issue: Printing errors occur Cause: Loading a print format containing non-human readable ASCII characters with a USB flash drive or SDTM card Solution: Use the Revolution® Scale Software ticket editor to correct non-human readable characters (NULL – Unit Separator; ASCII decimal value 0-31)
i Akwụkwọ ntuziaka dị site na Rice Lake Weighing Systems na www.ricelake.com/manuals ozi akwụkwọ ikike dị na www.ricelake.com/warranties
To avoid errors, download print formats with the Revolution Scale Software. If importing from a USB flash drive or SD card and the format does not print properly, replace non-human readable characters (NULL – Unit Separator) with a 0-31 ASCII decimal value enclosed by angle brackets (<>) using the Revolution ticket editor.
NOTE: Revolution Scale Software can be downloaded at www.ricelake.com/resources/software.
Editing Print Formats with Revolution
1. Launch Revolution Software. 2. Select File Mepee.

Ụdị ibu

Figure 1. Open Configuration File 3. Open the 1280 configuration file containing the print formats.

Ọnwa Isii 20, 2025

PN 230321 Mkpu A

Universal Mount Enclosure with Tilt Stand

The universal mount is shipped with a tilt stand and can be mounted on a wall, tabletop or any flat surface

4. Select Ticket Formatting Ticket Editor. 5. Search each Auxiliary Format for non-human readable ASCII characters (see Figure 2).
Figure 2. Corrupted Format 6. Replace each non-human readable character with a 0-31 ASCII decimal value enclosed by angle brackets (see
Onyonyo 3).
Figure 3. Corrected Format 7. Repeat Step 6 until all non-human-readable characters are replaced. 8. Download configuration to 1280 indicator before printing.
NOTE: The above steps will resolve errors with print formats that have already been corrupted. Print format corruption can reoccur when importing from a USB flash drive or SD card. To prevent errors, use only the Revolution software to download print formats to the 1280 Indicator.

Universal Mount Dimensions

Ọnwa Isii 20, 2025

www.ricelake.com

PN 230321 Mkpu A

Sealing the Front Door

In Legal for Trade applications, it is necessary to seal the indicator to restrict access to the internal hardware of the indicator. To seal the universal enclosure front door, wrap a lead wire seal through the large bottom right screw securing the front door and the two small fillister screws on the bottom of the enclosure. Alternatively, the A/D scale card includes fillister screws and a bracket that prevent the load cell cable from being disconnected.

Install Grounding Bus Bar
The grounding bus bar is installed on the controller assembly for grounding purposes on the panel mount.
1. Remove the four corner screws from the controller assembly.
2. Align the bus bar to the screw holes and secure by reinstalling the screws.

Seal Setup Switch
In Legal for Trade applications, it is necessary to seal the indicator to restrict access to the setup switch. Use the following
instructions to seal the panel mount enclosure.
The audit trail jumper (JP1) needs to be disabled, in the off (right) position, in order to seal the setup switch with
a lead seal wire. Access is not prevented simply by sealing the setup switch.
Wrap the lead wire seal through the large fillister screw and through the bottom tab of the DIN rail clip to restrict access to the
setup switch. Alternatively, the A/D scale card includes fillister screws and a bracket that prevent the load cell cable from being
kwụsịrị.
Figure 2-22. Seal the Setup Switch (Panel Mount Enclosure)
IHE dị mkpa
Enclosure and grounding bus bar hidden for illustration purposes. Controller
Assembly does not need to be removed from the enclosure to seal the setup switch
and the grounding bus bar can remain attached, if installed

Always disconnect power before opening the indicator.
Use a wrist strap to ground yourself and protect components from electrostatic discharge (ESD) when working
inside the indicator enclosure.
*Procedures requiring work inside the indicator must be performed by qualified service personnel only.
*In the wall and universal mounts, the supply cord serves as the power disconnect. The power receptacle to the
indicator must be accessible for these models.
It is recommended to remove the controller assembly from the universal enclosure for easier installation of the
option cards.
1. Remove the hardware securing the slot cover plate.
2. Remove the slot cover plate.
3. Slide the option card into place.
4. Secure the card using the hardware which secure the slot cover plate.
5. Jikọọ eriri.

Akwụkwọ / akụrụngwa

RICE LAKE 1280 Enterprise Series Programmable Weight Indicator and Controller [pdf] Ntuziaka onye ọrụ
1280, 1280 Enterprise Series Programmable Weight Indicator and Controller, 1280 Enterprise Series, Programmable Weight Indicator and Controller, Weight Indicator and Controller, and Controller, Controller

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

RICE LAKE 1280 Enterprise Series Programmable Weight Indicator and Controller

Nkọwapụta

Ntuziaka ojiji ngwaahịa