RGBlink RGB-RD-UM-D8 E003 Ngosipụta Scaler na Switcher LED Video Processor Akwụkwọ ntuziaka onye ọrụ.

ọdịnaya zoo

1 RGBlink RGB-RD-UM-D8 E003 Ngosipụta Scaler na Switcher LED Video Processor

2 Nkọwapụta

3 Nchịkọta nchekwa ndị ọrụ

4 Akwụkwọ / akụrụngwa

4.1 Ntụaka

RGBlink RGB-RD-UM-D8 E003 Ngosipụta Scaler na Switcher LED Video Processor

Nkọwapụta

Nkeji edemede Mba: RGB-RD-UM-D8
Nọmba ngbanwe: V1.4
Isi iyi ike: ruo 230 volts rms

Nchịkọta nchekwa ndị ọrụ

Ozi nchekwa izugbe na nchịkọta a bụ maka ndị ọrụ na-arụ ọrụ.

Ewepụla mkpuchi ma ọ bụ ogwe: Enweghị akụkụ ndị ọrụ na-arụ ọrụ n'ime unit ahụ. Mwepụ nke mkpuchi elu ga-ekpughe voltages. Iji zere mmerụ ahụ nkeonwe, ewepụla mkpuchi elu. Ejila unit rụọ ọrụ na-enweghị mkpuchi mkpuchi.
Isi mmalite ike: Ezubere ngwaahịa a ka ọ rụọ ọrụ site na isi iyi ike agaghị etinye ihe karịrị 230 volts rms n'etiti ndị na-eduzi ọkọnọ ma ọ bụ n'etiti ma onye na-eduzi ọkọnọ na ala. Njikọ ala nchebe site n'ụzọ nke onye na-eduzi ala na eriri ọkụ dị mkpa maka ịrụ ọrụ nchekwa.

Ịmepụta ngwaahịa ahụ: A gbanyere ngwaahịa a site na onye na-eduzi ala nke eriri ike. Iji zere ujo ọkụ eletrik, gbanye eriri ọkụ n'ime ebe a na-ekerịta waya nke ọma tupu ị jikọọ na ntinye ngwaahịa ma ọ bụ ọnụ mmepụta. Njikọ nchebe-ala site n'ụzọ nke onye na-eduzi ala na eriri ọkụ dị mkpa maka ịrụ ọrụ nchekwa.

View Fullscreen

Nchịkọta nchekwa ndị ọrụ
Ozi nchekwa izugbe na nchịkọta a bụ maka ndị ọrụ na-arụ ọrụ.

Ewepụla mkpuchi ma ọ bụ ogwe
Enweghị akụkụ ndị ọrụ na-arụ ọrụ n'ime unit ahụ. Mwepụ nke mkpuchi elu ga-ekpughe voltages. Iji zere mmerụ ahụ nkeonwe, ewepụla mkpuchi elu. Ejila unit rụọ ọrụ na-enweghị mkpuchi mkpuchi.

Isi Iyi Ike
Ezubere ngwaahịa a ka ọ rụọ ọrụ site na isi iyi ike agaghị etinye ihe karịrị 230 volts rms n'etiti ndị na-eduzi ọkọnọ ma ọ bụ n'etiti ma onye na-eduzi ọkọnọ na ala. Njikọ ala nchebe site n'ụzọ nke onye na-eduzi ala na eriri ọkụ dị mkpa maka ịrụ ọrụ nchekwa.

Ịmepụta ngwaahịa ahụ
A gbanyere ngwaahịa a site na onye na-eduzi ala nke eriri ike. Iji zere ujo ọkụ eletrik, gbanye eriri ọkụ n'ime ebe a na-ekerịta waya nke ọma tupu ị jikọọ na ntinye ngwaahịa ma ọ bụ ọnụ mmepụta. Njikọ nchebe-ala site n'ụzọ nke onye na-eduzi ala na eriri ọkụ dị mkpa maka ịrụ ọrụ nchekwa.

Jiri eriri ike kwesịrị ekwesị
Jiri naanị eriri ọkụ na njikọ akọwapụtara maka ngwaahịa gị. Jiri naanị eriri ike dị mma. Tụtụ aka mgbanwe eriri na njikọ na ndị ọrụ ruru eru.

Jiri Fuse Kwesịrị Ekwesị
Iji zere ihe egwu ọkụ, jiri naanị fuse nwere ụdị ya, voltage rating, na njirimara ọkwa dị ugbu a. Tụtụ aka n'ọnọdụ ndị ọrụ ruru eru.
Arụla ọrụ na ikuku ikuku
Iji zere mgbawa, arụla ngwaahịa a n'ime ikuku mgbawa.
Nchịkọta Nchekwa nwụnye

Akpachara anya maka nchekwa
Maka usoro nrụnye ngwaọrụ niile, biko debe iwu nchekwa na njikwa ihe ndị a dị mkpa iji zere imebi onwe gị na akụrụngwa. Iji chebe ndị ọrụ pụọ na ujo eletrik, hụ na chassis na-ejikọta na ụwa site na waya ala enyere na eriri ike AC. Ekwesịrị ịwụnye oghere AC Socket n'akụkụ akụrụngwa ma dịkwa mfe ịnweta.
© Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
2

Mwepu na nyocha
Tupu imepe igbe mbupu ngwaọrụ, lelee ya maka mmebi. Ọ bụrụ na ịchọta mmebi ọ bụla, gwa onye na-ebu mbupu ozi ozugbo maka mgbanwe niile nkwuputa. Ka ị na-emepe igbe ahụ, tulee ọdịnaya ya na mpempe akwụkwọ. Ọ bụrụ na ị na-ahụ ihe ọ bụla shortagEe, kpọtụrụ onye na-ere ahịa gị. Ozugbo i wepụrụ ihe niile dị na nkwakọ ngwaahịa ha wee lelee na ihe niile edepụtara edepụtara dị, lelee usoro ahụ anya iji hụ na ọ nweghị mmebi n'oge mbupu. Ọ bụrụ na enwere mmebi, gwa onye na-ebubu ya ozi ozugbo maka mgbanwe niile nkwuputa.

Nkwadebe saịtị
Gburugburu ebe ị rụnyere ngwaọrụ gị kwesịrị ịdị ọcha, na-enwu nke ọma, na-enweghị ihe kwụ ọtọ, ma nwee ike zuru oke, ikuku ikuku na ohere maka ihe niile.
© Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Isi nke 1 Ngwaahịa gị
1.1 Nhazi nkwakọ ngwaahịa
D8

1 x Igwe ọkụ AC

1 x eriri netwọk

1 x DB9 na eriri USB

1 x DB9 ruo RJ11 USB

1 x 8K HDMI eriri

D8 PLUS
1 x Igwe ọkụ AC

1 x eriri netwọk

1 x DB9 na eriri USB

1 x DB9 ruo RJ11 USB

1 x 8K HDMI eriri

1 x 8K DP USB

Mara: Igwe ọkụ AC wetara dị ka ọkọlọtọ dabere n'ahịa ebe a na-aga.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

1.2 Ngwaahịa gafereview
A na-ahụta usoro D mgbe niile ka onye ndu na nhazi ogo onyonyo n'ọkwa ngosi na s ngosi dị iche ichetages na ụlọ ọrụ. D8 na-aga n'ihu na-eduzi teknụzụ ngosi ka ọ bụrụ ihe nhazi vidiyo ọkwa 8K@60 na ụlọ ọrụ ahụ. Mepụta ahụmịhe anya. D8 bụ ọkọlọtọ nwere otu HDMI 2.1 ntinye ntinye na D8 PLUS bụ ọkọlọtọ nwere otu HDMI 2.1 ntinye ntinye na otu DP 1.4 ntinye, nke nwere ike izute ihe achọrọ nke ntinye ntinye ntinye 8K. The D usoro na-onwem na a 4-inch LCD ihuenyo mmetụ, nke optimizes n'ozuzu n'ihu panel aesthetic imewe.

1.2.1 Ogwe ihu
Rack Mount ntị

Eserese ngwa D8
Ihuenyo mmetụ aka

Rack Mount ntị

Jikwaa

Aha
Igwe ntị mgbakwasị ụkwụ na-emetụ aka

Nkọwa
Ihuenyo mmetụ LCD nke anụ ọhịa 4 na-enye gị ohere ijikwa D8 ozugbo, nke na-ebuli ahụmịhe onye ọrụ. Jiri skru na-ebu ibu dozie ngwaọrụ n'elu akwa ahụ. Maka ibu ngwaọrụ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

1.2.2 Ogwe azụ
D8 Interface Nchekwa Ike Ngbanwe

Ihe nkpuchi ihu

Interface Ike Ground Screw D8 (DP 1.4)

Ọnụ ụzọ nkwukọrịta ihe ntanetị ntinye ntinye

Interface Nchekwa Ike ngbanwe Interface

Ihe nkpuchi ihu

Ala ịghasa

Ntinye ntinye

Interface nkwurịta okwu mmepụta

Aha

Nkọwa

D8 bụ ọkọlọtọ nwere Single HDMI 2.1 Input Interface

Ntinye ntinye

D8 PLUS bụ ọkọlọtọ nwere Single HDMI 2.1 Input Interface na Single DP 1.4

Ntinye ntinye

Ihe ntanetị mmepụta

Ọkọlọtọ nwere Quad HDMI 2.0 ọdụ ụgbọ mmiri

Interface nkwurịta okwu

Ọkọlọtọ nwere 1xRS 232 Serial Port1xLAN Network Port 1xIN-GENLOCK-LOOP Port

Ike Okwu

Jikọọ eriri ọkụ ọkọlọtọ na ngwaọrụ wee gbanye n'ime oghere mgbidi

Ihe nchekwa ihe ngbanwe ọkụ ọkụ Ground Screw

Gbanyụọ ma ọ bụ gbanyụọ ngwaọrụ ahụ
A na-eji iji dọpụta ngwaọrụ, dozie eriri ma chekwaa ihu site na nkukota Mee ka nchekwa na ntụkwasị obi dịkwuo elu, ma zere ihe mberede dịka ọkụ na mgbawa nke ọkụ eletrik static kpatara.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

1.2.3 Akụkụ
Nke a bụ akụkụ maka ntụaka gị: Akụkụ: 484mm × 378mm × 88.9mm
D8
D8 PLUS

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

1.3 Atụmatụ
Ntinye aka 8K @ 60 Nkwado mgbama n'etiti abụọ 8K@60 ntinye arụnyere na 4 "LCD njikwa ihuenyo mmetụ 8K EDID njikwa Genlock na-emekọrịta ihe na-enweghị atụ, ọtụtụ nhazi splicing dị Layer cropping na scaling Genlock input na loop throuch XPOSE 2.0 njikwa na-akwado mkpebi mmepụta ọkọlọtọ. ma hazie mkpebi nrụpụta Hot swap mepere emepe API

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Isi nke 2 Wụnye ngwaahịa gị
Mara: D8 na D8 PLUS bụ otu na ntinye. Isiakwụkwọ a na-ewere D8 dị ka example.
2.1 Tinye ike
Jikọọ ike na D8 site na iji eriri ọkụ ọkọlọtọ. Tinye otu njedebe nke eriri ọkụ na interface ike D8. A na-ejikọta njedebe nke ọzọ na oghere ike.
2.2 Jikọọ Isi mmalite mgbaàmà na Kọmputa njikwa
D8 na-akwado ntinye HDMI 2.1DP 1.4 na mmepụta HDMI 2.0. Jikọọ D8 na Igwefoto, PC, Laptọọpụ dị ka mgbama ntinye, jikọọ D8 na monitors, dị ka egosiri na foto dị n'okpuru. Tupu ijikọ akara na D8, hụ na ngwaọrụ niile agbanyụrụ na mbụ, wee mechie skru/mkpọchi njikọ ebe enyere ya.

D8 na-akwado njikwa XPOSE 2.0, yabụ ọ dị mkpa ijikọ ngwaọrụ na kọmputa njikwa. Mee njikọ ozugbo site na Njikọ Serial. Jikọọ RS232 ọdụ ụgbọ mmiri nke ngwaọrụ na kọmputa na Oghere Usoro USB.
2.3 Gbanwuo ngwaahịa gị

Pịa mgba ọkụ ọkụ na azụ azụ na usoro ahụ amalite ịrụ ọrụ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Isi nke 3 Jiri ngwaahịa gị
3.1 Isi NchNhr
Gbanwuo ọkụ ọkụ na azụ panel na ihuenyo mmetụ ga-egosipụta NchNhr na nọmba Oghere Usoro SN. Dị ka egosiri na foto dị n'okpuru, MENU gụnyere Ngwaọrụ, Ntọala, Ibu, Asụsụ (Bekee/Simplified Chinese) , Ụdị na ntinye.

3.1.1 Ngwaọrụ
Pịa ịbanye interface ndị a. Na interface ahụ, ndị ọrụ nwere ike ịlele ọnọdụ ntinye na mmepụta na mkpebi.

Dị ka e gosiri na ọnụ ọgụgụ dị n'elu, mkpebi nke DP 1.4 ntinye ọdụ ụgbọ mmiri bụ 7680 × 4320 @ 60, na mmepụta mkpebi bụ 3840 × 2160 @ 60.
3.1.2 Ntọala
Ọ bụrụ na interface dị ugbu a bụ , pịa , ya bụ, nhọrọ menu gara aga ịlaghachi na interface gara aga, dị ka egosiri na foto dị n'okpuru.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Mara:
Yiri arụmọrụ n'elu, ma ọ bụrụ na interface ugbu a bụ <Ntọala>, <Ibu Ibu>, , < Ụdị > ma ọ bụ < Ntinye >, dị nnọọ pịa nhọrọ gara aga ka ịlaghachi na ntanetị nke gara aga nzọụkwụ-site-nzọụkwụ ruo mgbe laghachi na isi NchNhr.
Pịa ịbanye interface ndị a. N'ime interface ahụ, ndị ọrụ nwere ike ịtọ mkpebi mmepụta, họrọ okirikiri nhọrọ ukwuu, rụọ njikwa EDID, tọọ mkpụrụ osisi Layer na nha nha wee rụọ nrụpụta nrụpụta.

3.1.2.1 Mkpebi mmepụta
Pịa n'ime ịtọ mkpebi mmepụta. Ị nwere ike ịhọrọ mkpebi ọkọlọtọ ma ọ bụ mkpebi omenala.

Ọkọlọtọ mkpebi
Pịa ịhọrọ mkpebi ọkọlọtọ site na igbe ahụ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Pịa “Tinye” ka ịchekwaa na ihuenyo mmetụ ahụ laghachi azụ na interface gara aga ka ị lelee ugboro abụọ.
Hazie mkpebi
Pịa ịbanye interface ndị a.
D8 na-akwado iji hazie mkpebi mmepụta. Ọ bụrụ na ịtọọ mkpebi ahụ na 3840×2160@50, pịnye na obosara, elu na ugboro ugboro otu otu wee pịa "Tinye" iji chekwaa. Wee lelee mkpebi setịpụrụ n'ime interface.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.1.2.2 Kewara
Ọ bụrụ na interface dị ugbu a bụ , pịa , ya bụ, nhọrọ menu gara aga ịlaghachi na interface gara aga, dị ka egosiri na foto dị n'okpuru.

Pịa ịhọrọ okirikiri nhọrọ ukwuu na hazie paramita.

Enwere ụdị nkewa atọ dị, gụnyere Cross, H 3/1 na V 4/1.

Gbasaa mode

Nkọwa

Gafee

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

H 1/4
V 1/4
Cheta na: D8 ka atọrọ ka ọ gafee na ndabara. Gafee Pịa na ihuenyo mmetụ ahụ gosipụtara dị ka ndị a:

Tọọ mkpokọta H, mkpokọta V, obosara 1 na ịdị elu 1 nke ihuenyo dịka mkpa dị n'ezie. Maka example: Tọọ ngụkọta H ka 7680, V ngụkọta ruo 4320, Obosara 1 ruo 3840, Elu 1 ruo 2160, wee obosara 2 bụ 3840, otu obosara 1, Elu 2 bụ 2169, dị ka Height 1.
H Ngụkọta: 7680 V Ngụkọta: 4320 Obosara 1: 3840 Elu 1: 2160 Jiri ahụigodo ọnụọgụ tinye paramita, wee pịa "Chekwa Settings"> "Kwenye" iji chekwaa ntọala n'elu.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

H 1/4 Pịa na ihuenyo mmetụ ahụ gosipụtara dị ka ndị a:
Tọọ mkpokọta H, mkpokọta V, obosara 1, obosara 2 na obosara 3 nke ihuenyo dịka mkpa dị n'ezie. Maka example: Tọọ ngụkọta H ka 12000, V ngụkọta ruo 2160, Elu 1 bụ 2160, otu V ngụkọta. Tọọ obosara 1 ruo 3500, Obosara 2 ruo 3840, Obosara 3 ruo 2160, na obosara 4 ga-abụ 2500 ( H ngụkọta <12000> - Obosara 1 <3500> - Obosara 2 <3840> - Obosara 3 <2160> 4>).
H Ngụkọta: 12000 V Ngụkọta: 2160 Obosara 1: 3500 Obosara 2: 3840 Obosara 3: 2160 Jiri ahụigodo ọnụọgụ tinye paramita, wee pịa "Chekwa Ntọala"> "Kwenye" iji chekwaa ntọala dị n'elu.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

V 1/4 Pịa na ihuenyo mmetụ ahụ gosipụtara dị ka ndị a:

Tọọ ngụkọta H, ngụkọta V, ịdị elu 1, ịdị elu 2 na ịdị elu 3 nke ihuenyo dịka mkpa dị n'ezie. Maka example: Tọọ ngụkọta H ka 3840, V ngụkọta ruo 6480, Obosara 1 bụ 3840, dị ka mkpokọta H. Tọọ elu 1 ruo 2160, ịdị elu 2 ruo 1080, ịdị elu 3 ruo 1920, na ịdị elu 4 ga-abụ 1320 (V ngụkọta <6480> - Elu 1 <2160> - Elu 2 <1080> - Elu 3 <1920> = Elu 4 < 1320>)
H Total 3840 V Total 6480 Height 12160 Height 21080 Height 31920 Jiri ahụigodo ọnụọgụ tinye paramita, wee pịa "Chekwa Ntọala"> "Kwenye" ka ịchekwaa ntọala n'elu.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.1.2.3 EDID
laghachi na , wee pịa maka njikwa EDID.
Hazie EDID Họrọ na ihuenyo mmetụ ahụ gosipụtara dị ka ndị a:
Ọ bụrụ n’itinye mkpebi na 7000×4000@60, jiri ahụigodo ọnụọgụ tinye obosara, elu na ugboro otu otu wee pịa “Tinye” iji gosi.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Lelee ụkpụrụ atọrọ, wee pịa ” Tinye"> “Kwenye”.
Mezue ntọala EDID na D8, wee tọọ mkpebi na isi iyi mgbama (dịka kọmputa) ka ọ bụrụ otu na D8. Ọ bụrụ na ịtọ EDID na D8 ka 7000×4000@60, usoro iji tọọ mkpebi na kọmputa bụ ndị a:
Kwụpụ 1: Tọọ mkpebi na kaadị eserese. Na-ewere NVIDIA dị ka example: Pịa aka nri na desktọpụ wee họrọ “NVIDIA Control Panel”.

Kwụpụ 2: Pịa "Ngosipụta"> "Change Resolution".
- Nke mbu, lelee ma enwere ike 7000 × 4000@60 na ndetu ndetu. Họrọ mkpebi a ozugbo ma ọ bụrụ na enwere 7000 × 4000@60 na-enweghị mkpa ịgbaso Nzọụkwụ 3 ruo Nzọụkwụ 5 iji hazie mkpebi.

- Ọ bụrụ na enweghị ike ịchọta 7000 × 4000@60, biko pịa "Hazie" wee soro nzọụkwụ 3 ruo nzọụkwụ 5 maka.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

ntọala mkpebi.
Nzọụkwụ 3: Pịa "Mepụta omenala mkpebi".
Kwụpụ 4: Hazie mkpebi Tinye 7000 na “pikselụ kwụ ọtọ”, 4000 na “ahịrị kwụ ọtọ” na 60 na “ọnụego ume ọhụrụ”. Tinye ụkpụrụ mkpebi omenala, wee pịa "Nnwale". Họrọ "Ee" na mmapụta iji tinye mkpebi omenala.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Nzọụkwụ 5: Mgbe ahụ set mkpebi ga-egosipụta na "Custom". Pịa "OK" wee lelee mkpebi na "Change Resolution" interface.

Tọgharia EDID Pịa ” Tọgharia EDID"> ”Kwenye” ka ikpochapụ ntọala ndị gara aga.
3.1.2.4 oyi akwa
laghachi na , wee pịa ịbanye interface.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Ndị ọrụ nwere ike ime Layer Scaling na Cropping.
Pịnye kwụ ọtọ, ọnọdụ kwụ ọtọ, obosara na ịdị elu dịka achọrọ. Wee pịa "Chekwa Ntọala"> "Kwenye" ka ịchekwaa paramita dị n'elu.

3.1.2.5 nrụpụta nrụpụta
laghachi na , wee pịa ịbanye interface.

Ịme nrụpụta ụlọ nrụpụta ga-ehichapụ data onye ọrụ yana ntọala ahaziri iche na ngwaọrụ ahụ wee weghachi ya na ọnọdụ mbụ ya.
Mara: A ga-eweghachi paramita niile na paramita ndabara, nke gụnyere mana ọnweghị oke na IP ngwaọrụ, EDID, ihe ngosi ntọala, wdg.
3.1.3 Ibu Ibu Presets
Laghachi na interface isi, wee pịa ka ibu ihe atọrọ atọ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

D8 na-enye ọnọdụ 16 maka ịchekwa ụlọ akụ, nke a na-ekwe ka ibu ya.
Rịba ama
Agba odo: ụlọ akụ dị ugbu a; Okirikiri akwụkwọ ndụ akwụkwọ ndụ: echekwara oke; Okirikiri isi awọ: ụlọ akụ efu.
Pịa ụlọ akụ achọrọ, na interface ahụ ga-apụta "Ịchọrọ Ibu Ibu Bank X", egosiri dị ka n'okpuru. Pịa ime nhọrọ.

Rịba ama
Biko mee ntọala Scene na XPOSE 2.0 nke mbụ wee buru ụlọ akụ.
3.1.4 Asụsụ
Laghachi na interface isi, wee pịa maka ngbanwe asụsụ.

Họrọ Bekee ma ọ bụ Chinese Simplified, na interface onye ọrụ ga-agbanwe dịka.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Ụdị 3.1.5
Laghachi na interface isi, wee pịa maka njedebeview nke Panel Version na Main Board Version.

3.1.6 Ntinye
Laghachi na interface isi, wee pịa maka mgba ọkụ ntinye ntinye.

Onye ọrụ nwere ike ịlele mkpebi ntinye ebe a. Ka ịgbanwee mgbaama ntinye, ị nwere ike pịa isi mmalite ntinye achọrọ, ihe ngosi ga-emekọrịta ngbanwe ya dịka mgbaama ntinye ahọpụtara.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.2 XPOSE 2.0 nwụnye
Ihe ndị chọrọ gburugburu ebe obibi: Onye nhazi windo: 1 GHz ma ọ bụ karịa 32 bit ma ọ bụ 64 bit processor Ebe nchekwa: 4 GB ma ọ bụ karịa Eserese: Nkwado DirectX 9 128M ma ọ bụ n'elu (mepee mmetụta AERO) Oghere diski ike: N'elu 16G (nkebi mbụ, usoro NTFS) Nyochaa: Mkpebi ga-1920 × 1080 pikselụ ma ọ bụ n'elu (ọ pụghị igosipụta na-emekarị ma ọ bụrụ na mkpebi bụ ala karịa 1920×1080) Sistemụ arụmọrụ: Windows 7 ma ọ bụ n'elu (full version, bụghị Ghost version ma ọ bụ kọmpat version) CPU:i5 na n'elu Mac Monitor. : Mkpebi ga-1680 × 1050 pikselụ ma ọ bụ n'elu (ọ pụghị igosipụta na-emekarị ma ọ bụrụ na mkpebi bụ ala karịa 1680×1050) CPU: i5 na n'elu

1. Pịa ugboro abụọ

, ọ ga-ebulite installer

igbe asụsụ, họrọ asụsụ, maka example, họrọ "Bekee", wee pịa "OK" iji gosi.

2. Pịa "Next"iji wụnye.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3. Pịa “Chọgharịa…” ka ịhọrọ ebe wụnye ngwanrọ XPOSE. Pịa "Wụnye".
4. N'oge echichi, ọ ga-gbapụta na window nke Wụnye Shield Ọkachamara maka Virtual Com n'ọdụ ụgbọ mmiri.
5. Pịa "Ọzọ".

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

6. Mgbe ahụ pịa "Wụnye", dị ka e gosiri na ọnụ ọgụgụ.
7. Pịa "Mechaa" ma mezue nrụnye, dị ka e gosiri na foto dị n'okpuru.
8. Pịa "N'ikpeazụ"ma dị njikere na-agba ọsọ XPOSE software.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.3 XPOSE 2.0 arụ ọrụ

Mara: Ọrụ XPOSE 2.0 na-esote na-ewe D8 PLUS dị ka example, D8 na D8 PLUS na-arụ otu ihe ma ewezuga ọdịiche nke interface ntinye.

3.3.1 Banye na XPOSE

Pịa akara ngosi a ugboro abụọ

, ma tinye log na

interface egosiri n'aka nri:

A na-ahazi asụsụ mbụ nke XPOSE 2.0 nke onwe ya dabere na asụsụ sistemụ arụmọrụ nke kọmputa. Ọ bụrụ na ịchọrọ ịgbanwe asụsụ, pịa Asụsụ wee họrọ otu nke ịchọrọ. Wee pịa Malite iji mee XPOSE.
Mgbe nbanye, interface na-egosi na nri.

Ndị ọrụ nwere ike ịhụ akụkụ 5 bụ isi: Ntọala Sistemu, Jikọọ, Ngosipụta, Layer, Ihe ngosi.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.3.2 Ntọala Sistemu

Pịa

ịbanye interface.

Chọta Ngwaọrụ: Ụdị ọhụrụ nke XPOSE 2.0 bụ ndabara efu na Chọta Ngwaọrụ. Ndị ọrụ kwesịrị ịhọrọ ngwaọrụ achọrọ na Chọta Ngwaọrụ.
Software VersionCheck ụdị ugbu a. Asụsụ Họrọ asụsụ achọrọ.
Njikwa ahụigodo: Pịa a ga-atụgharị ya na windo ntọala ahụigodo. Emebere ntọala ahụigodo ka ọ dabara maka sistemụ arụmọrụ dị iche iche dịka Windows na Mac. Ndị ọrụ nwere ike ịtọ igodo mkpirisi mkpirisi.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Dọrọ Ntinye, Mpụta, Layer na Preset site na ndetu gaa na igodo ịchọrọ dị ka egosiri na foto a:
Biko mara mpaghara ahụigodo ebe na-enye ohere ịtọ igodo mkpirisi.
Ọ bụrụ na ntọala ahụ ezighi ezi ma ọ bụ enweghị mkpa maka igodo ịkpụ mkpirisi ọzọ, pịa iji kpochapụ ụfọdụ igodo ma ọ bụ kpochapụ ha niile. Kpochapụ: bụ ikpochapụ ụfọdụ igodo, a ga-ebu ụzọ họrọ igodo ndị ahụ. Kpochapụ ihe niile: bụ iwepụ igodo ịkpụ mkpirisi niile edoberelarị. Ndị ọrụ nwekwara ike ichekwa ntọala ahụigodo dị ka edemede.
Ntọala ederede
File Ụzọ: Chekwaa mwube ahụigodo dị ugbu a na edemede gaa n'ụzọ mpaghara. File Aha: script file aha. Ederede Ibu Ibu: Ibu/Hichapụ. Pịa Laghachi azụ na .

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Ọdụ ụgbọ mmiri Serial Ntọala nkwukọrịta: Chọọ naanị ndị na-ejikọ site na ọdụ ụgbọ mmiri. Njikọ Ethernet: Chọọ naanị ndị jikọọ site na Ethernet. Ha abụọ ahọpụtara: Pịa ha abụọ, njikọ abụọ ahụ na-agbanwe n'otu oge. Mara: D8 naanị na-akwado Njikọ Port Serial.
Ntọala ngosi: Ndị ọrụ nwere ike ịgbanwuo ọnọdụ ịgbasawanye ma ọ bụrụ na enwere ihuenyo ndọtị.
Ntuziaka novice: Lelee ntuziaka novice maka ịrụ ọrụ ngwa ngwa nke ngwa ngwa XPOSE.
Jikọọ akpaaka Gbanwuo mgba ọkụ njikọ akpaaka na interface ahụ ga-apụta ozugbo ichetara onye ọrụ ma ọ ga-eweghachi interface gara aga.
Ntọala ikike

Pịa

imeghe ntinye ikike.

A na-eji ntọala ikike ịgbakwunye na dezie aha njirimara na paswọọdụ maka ndị ọrụ enyere ikike yana ikike ndị ọrụ nwere ike ịrụ ọrụ.

Ọkwa ikike adịghị agbanyụ, biko gbanye ọnọdụ maka ịrụ ọrụ.

Maka ngwaọrụ na-arụ ọrụ na nke mbụ, ma ọ bụ nkwalite ngwaọrụ, ma ọ bụ nrụpụta ụlọ ọrụ, XPOSE ndabara ịbanye dị ka onye nchịkwa nwere aha ndabara na Admin, na

PWD adabaghị na admin.

egosiri na Nhọrọ

Ngwaọrụ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Ọ bụrụ na ndị ọrụ abanyela na XPOSE mbụ,

egosiri na Ngwaọrụ ahọpụtara. Tinye Aha na

PWD, wee pịa Nbanye.
arụ ọrụ nke ọma.

akara ngosi na-egosi

Pịa Ọhụrụ n'ime ikike ikike ịgbakwunye aha USER ọhụrụ wee tọọ PWD.
Wee pịa Chekwa ka nkwenye.

Dezie: Dezie aha njirimara na paswọọdụ arụrụlarị.
Hichapụ: Hichapụ aha njirimara na paswọọdụ arụrụlarị.
Ntọala ikike: Ọrụ dị na XPOSE 2.0 na kọmputa a nke enyere ndị ọrụ ohere ịrụ ọrụ. Pịa ngọngọ akwụkwọ ndụ akwụkwọ ndụ ka iwepu ọrụ ahụ agaghị ekwe.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.3.3 Mmepụta | Ntinye | agafeelaview

Pịa

ka ịlele n'azụ panel interface dị ka egosiri na

ọnụ ọgụgụ ziri ezi.

Cheta na: 1. n'ọnụ odo odo na-egosi ntinye, blue n'ọnụ na-egosi mmepụta, odo n'ọnụ na-egosi nkwurịta okwu. 2. Interface Agba nkọwa: 1) Green: nkịtị mgbaama; 2) Yellow: mgbaàmà na-adịghị mma; Ọcha: enweghị mgbaama.

Njikọ ngwaọrụ
1. Pịa ngwaọrụ ị chọrọ na ndepụta.

2. Pịa

n'ime .

Ntọala mmepụta

Pịa ọdụ ụgbọ mmiri ọ bụla, a na-ahọrọ bọọdụ ebe ọdụ ụgbọ mmiri dị. Ndị ọrụ nwere ike ime ntọala n'ọdụ ụgbọ mmiri ugbu a. Nkume uhie uhie na-enwu n'akụkụ ọdụ ụgbọ mmiri a họọrọ mgbe a pịrị ya.

Mara: Biko buru ụzọ lelee ka ị hụ na ụdị ahọpụtara na Chọta ngwaọrụ, yana ụdị nzikọrịta ozi na Ntọala nzikọrịta ozi ziri ezi.

Mkpebi: Ndị ọrụ nwere ike họrọ mkpebi ọkọlọtọ ma ọ bụ mkpebi omenala.
1. Enwere ike ịhọrọ mkpebi ọkọlọtọ site na 1024 × 768 @ 75 ruo 7680 × 1080 @ 60 dị ka egosiri na ọnụ ọgụgụ ziri ezi. 2. D8 na-akwado iji hazie mkpebi mmepụta. Pịa ọdụ ụgbọ mmiri mmepụta wee pịnye na obosara, ịdị elu na ọnụego ume ọhụrụ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

DE:
Bits: 8 ibe n'ibe, 10bits ma ọ bụ 12 bits nhọrọ HDR: SDR, HDR10, nhọrọ HLG
Ntọala ntinye
Pịa ọdụ ụgbọ mmiri ntinye, dị ka HDMI 2.1 IN, na ndị ọrụ nwere ike ime ntọala na ọdụ ụgbọ mmiri ugbu a.
Nkume uhie uhie na-enwu n'akụkụ ọdụ ụgbọ mmiri a họọrọ mgbe a pịrị ya.
Onye ọrụ nwere ike ịtọ na .
Ntọala akụrụngwa
Ntinye Portchosen Ọkọbara: X/Ythe na-amalite kehoraizin na vetikal obosara/ịdị elu: nha nha nha na kwụ ọtọ. Ihe ubi: Nkwado akuku maka ọnọdụ, ịdị elu na obosara.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

EDIDE
Tinye Portchosen ọdụ ụgbọ mmiri Ntọala ntọala: Obosara/ịdị elu/ụdị ugboro n'ụdị omenala iji gboo mkpa gị.

gafereview

Pịa Ntọala ụlọ nrụpụta.

, enwere Overview na

Ngwaọrụ Infousers nwere ike ịlele ozi Mac ugbu a.

Isi Board Ama: ndị ọrụ nwere ike ịlele ngwanrọ na ngwaike nke CommBoard, BackBoard, MatrixBoard.

Ozi Modul ntinye: ndị ọrụ nwere ike ịlele aha modul ntinye ugbu a, ụdị ngwanrọ na ụdị ngwaike.
Ozi Modul mmepụta: ndị ọrụ nwere ike ịlele aha modul mmepụta ugbu a, ụdị ngwanrọ na ụdị ngwaike.
Ntọala ụlọ ọrụ Wepụ EDID: kpochapụ oke EDID gara aga
Pịa Wepu EDID wee pịa Tọgharia.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.3.4 Ngosipụta njikwa

Sistemụ ngosi bụ maka ndị ọrụ ka ha tọọ okirikiri nhọrọ ukwuu.

Pịa

ịbanye interface njikwa okirikiri nhọrọ ukwuu.

Atọọ D8 ka ọ bụrụ Obe site na ndabara, egosiri dị ka onyonyo n'aka nri.

Ọ bụrụ na ịchọrọ nhazi dịka H 1/4, V 1/4 ma ọ bụ ndị ọzọ,

pịa ma jide

ka ịkagbu otu ihuenyo ugbu a

wee mepụta akpa ọhụrụ.

akpa:
Akpa ebe a pụtara Mpaghara Ngosipụta, maka exampỌ nwere ike ịbụ ihuenyo LED kpụrụ ma ọ bụ ọtụtụ LCD.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Ụdị
Enwere ụdị “Ngosipụta Ngosipụta” 8 bụ isi, nke a na-eji nwee interface mmepụta, enwere ike were ya dị ka nhazi mmepụta. Dọrọ template ka imepụta akpa na okwu ọzọ mpaghara ngosi.
Mkpebi
Ndị ọrụ nwere ike họrọ mkpebi mmepụta dị ka egosiri na ọnụ ọgụgụ a.
Ụdị
Akara ụdị ọ bụla na agba dị iche iche ma nye ya ndebiri dabara adaba. Ndị ọrụ nwere ike ịrụ ọrụ n'okpuru ụdịdị dị iche iche.

D8 na-akwado ọnọdụ Split. Ọ nweghị akpa edobere mgbe mgbanwe nke mkpebi dị n'okpuru ọnọdụ Split, ya bụ, ịkwesịrị ịmegharị akpa.
Hazie akpa

Pịa

na ala nke template ndepụta.

Nhazi nlekota: akpaaka ma ọ bụ akwụkwọ ntuziaka

Nzọụkwụ nke ịmepụta akpa bụ ndị a: 1. Dejupụta H Total / V Total na Row / Column, ọ ga-agbakọọ ihe H na ihe V na-akpaghị aka. Maka example, ọ bụrụ na ị ga-amasị ịmepụta akpa nwere 1 ahịrị na 4 ogidi na ngosi nke ọ bụla nwere elu 1080, obosara nke akpa akpa bụ 1920, nke abụọ akpa bụ 1680, nke atọ akpa bụ 1600 na nke anọ akpa bụ 2480 Ngụkọta obosara ga-abụ 7680 na ngụkọta elu ga-abụ 1080. 2. Pịa , akpa ahụ ga-egosipụta na interface ahụ, ma gosipụta obosara na ịdị elu nke Ngosipụta ọ bụla. 3. Pịa iji chekwaa akpa ahụ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Ndozi akpa

1. Bugharịa: Dọrọ boarder nke ngosi ebe ịkwaga ebe ya na interface.

2. Ọnụ ọgụgụ: Pịa akara ngosi

iji daa, Pịa ka ibuwanye

oke nke ebe ngosi na interface.

3. Kagbuo: Pịa ma jide otu.

ka ịkagbu ihuenyo

Ngosipụta
Ndepụta mmepụta White nke dị Grey one adịghị adị Ọrụ Nzọụkwụ N'aka ekpe pịa mmepụta wee dọrọ ya na ngosipụta nke akpa atọrọ. Ndochi Dọrọ na dobe mmepụta n'ime ngosipụta kwekọrọ. Mpụta a na-edochi ga-esi na isi awọ gaa na-acha ọcha na listi ahụ.

Sistemụ ngosi
D8 na-enye ndị ọrụ ohere dezie aha mpaghara ngosi nke emepụtara site na ịpị .

3.3.5 Layer Management

Ezubere njikwa oyi akwa iji jikwaa oyi akwa

nke ọ bụla ileba anya. Pịa interface a akara ngosi:

ịbanye na

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Mpaghara ngosi
Mgbe ịbanye na interface nchịkwa Layer, mpio ahụ ghe oghe. Otu ihuenyo emepụtara na Sistemu Ngosipụta ga-adọkpụrụ site na Mpaghara Ngosipụta.
Signal
Ndepụta mgbaàmà, na-egosi akara ntinye na mkpebi niile ugbu a. Dọrọ mgbama na ngosi. Pịa , ndị ọrụ nwere ike nyegharịa mgbaama ntinye aha wee mesịa
pịa iji gosi.
oyi akwa
Nọmba oyi akwa Nọmba dị na rektangulu uhie dị n'aka nri na-anọchi anya ọnụọgụ nke ọkwa nwere ike idowe na mmepụta.
Ka a na-adọkpụpụta mgbama, ọnụọgụ oyi akwa na-ebelata. Ọ bụrụ na ejirila nọmba oyi akwa, enweghị ike ịdọrọ mgbama ahụ.
Mara: D8 na-akwado naanị oyi akwa 1*8K.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Ndozi oyi akwa enwere ụzọ abụọ isi dozie oyi akwa. 1. Jiri mmanya n'okpuru interface Họrọ otu oyi akwa na mmanya na-egosi ya mgbaàmà isi iyi, pịnye na ọnọdụ na size. Pịa Chekwa iji gosi.
2. Ọnụ ọgụgụ nke oyi akwa na ihe ubi Họrọ otu oyi akwa achọrọ ka edozi ya, ma pịnye n'ọnọdụ ya na nha ya.
Alfa: 0 ~ 128 X / Ythe kehoraizin na vetikal ọnọdụ nke akuku / ọnụ ọgụgụ obosara / elu: kehoraizin na vetikal size nke akuku / ọnụ ọgụgụ
akara ngosi a pụtara data metụtara, mgbe obosara gbanwere, ịdị elu ga-agbanwe dịka otu nha.
akara ngosi a pụtara data enweghị njikọ, obosara na ịdị elu kwesịrị ka ejupụta n'otu n'otu.

Ntugharị Layer Na-ebugharị òké iji dọkpụrụ oyi akwa.
Wepu oyi akwa Pịa obe dị n'elu aka nri nke oyi akwa iji wepụ oyi akwa ma ọ dị mkpa.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Nhazi oyibo : iji kụrie oyi akwa : kpochie oyi akwa iji gbochie ọrụ na-ezighi ezi: max iji kpuchie ihe nleba anya. : kpuchie ndị nlekota niile n'otu ihuenyo otu
na otu mgbama.
3.3.6 Njikwa atọrọ
Emebere njikwa preset ka ọ gbanwee ụlọ akụ (nhazi ọnọdụ emere na nzọụkwụ ikpeazụ). Ụdị njikwa nke atọrọ: 1. Ụdị akwụkwọ ntuziaka 2. Usoro nhazi oge
1. Usoro ntuziaka
A ga-egosipụta ọnọdụ a họọrọ na isi interface, na ihuenyo PGM dị na mbụ na Bank Column. Cut Cut, gbanwee site na PVW gaa na PGM ozugbo.

Aha atọrọ
Họrọ ụlọ akụ wee pịa Preset Aha, dejupụta oghere mgbe aha preset ọhụrụ gachara ka ị nyegharịa aha Preset (Bank). Pịa ngọngọ agba mgbe Nhọrọ Agba wee họrọ agba ọhụrụ maka onye na-abanye ụlọ akụ a họọrọ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Hotkey Jiri hotkey mee ka ọrụ ahụ dị na Njikwa Preset dabara adaba karịa.

2. Usoro nhazi oge

Emebere ọnọdụ a ka ịtọọ mgba ọkụ akpaaka (scene/preset).
Nzọụkwụ dị ka ndị a
1. Gbanwuo "Schedule Mode" 2. Họrọ "Times Loop" na Loop Mode 3. Họrọ ụlọ akụ 4. Dejupụta " Ogologo oge" 5. Pịa "OK"

Ndị ọrụ nwere ike pịa

iji dezie na

ihichapụ. Mgbe

Emechara ntọala, gbanye "Loop Switch" .

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Isi nke 4 Usoro Usoro

4.1 Ngwaahịa Koodu

130-0008-05-0

130-0008-03-0

D8 PLUS

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Isi nke 5 Nkwado
5.1 Kpọtụrụ anyị

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Isi nke 6 Ihe Odide

6.1 Nkọwapụta

Njikọ Model
Arụmọrụ

Mkpebi ntinye ike ntinye nkwukọrịta
Mkpebi mmepụta
Akwadoro Standard Colorspace

D8 HDMI 2.1

2 × HDMI-A

HDMI 2.0
Genlock
LAN RS232 1 × IEC

4×HDMI-A 2×BNC (1×IN | 1× LOOP) 1×RJ45 1×RJ11

Nchọpụta akpaaka

D8 PLUS HDMI 2.1 DP 1.4 HDMI 2.0
Genlock
LAN RS232 1 × IEC

1×HDMI-A 1×DP 4×HDMI-A
2×BNC (1×IN | 1× LOOP)
1 × RJ45 1 × RJ11

HDMI 2.1 SMPTE VESA
DP 1.4 SMPTE VESA

1280×720@50/60 | 1920×1080@30/50/60 | 3840×2160@25/30 | 7680×4320@30/60 1024×768@60 | 1280×800@60 | 1280×1024@60 | 1360×768@60 | 1366×768@60 | 1440×900@60 | 1920×1200@60 2560×1440@60 | 2560×1600@60/120 | 3840×2160@30/60/120 | 4096×2160@50/59/60 | 7680×4320@30/60 | mkpebi omenala
1280×720@50/60 | 1920×108030/50/60 | 3840×2160@25/30 | 7680×4320@30/60 1024×768@60 | 1280×800@60 | 1280×1024@60 | 1360×768@60 | 1366×768@60 | 1440×900@60 | 1920×1200@60 2560×1440@60 | 2560×1600@60/120 | 3840×2160@30/60/120 | 4096×2160@50/59/60 | 7680×4320@30/60 | mkpebi omenala

Họrọ mkpebi ọkọlọtọ ma ọ bụ mkpebi omenala

HDMI 2.0 SMPTE
VESA

1280×720@50/60 | 1920×1080@30/50/60 | 3840×2160@30/60 1280×720@23.98/24/25/29.97/30/50/59.94/60 | 1920×1080@23.98/24/25/29.97/30/50/59.94/60/120 | 1920×2160@120 3840×2160@23.98/24/25/29.97/30/50/59.94/60 | 4096×2160@23.98/24/25/29.97/30/50/59.94/60 | custom resolution

HDMI

2.1

Ntinye DP HDMI 2.1
8K60 8K30

1.4 YUV
4:2:0 8/10/12 bit 4:2:0 8/10/12 bit | 4:2:2 8/10/12 bit |

RGB -
8/10 bit

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Ozi ngwaike
Ike
Environment Arụ Ọrụ

Ụdị ngwaọrụ
Ntinye Voltage Kachasị Ike Okpomọkụ Igwe Ọkụ Ọkụ Ngwaọrụ Arọ Ngwungwu Arọ Akụkụ akụkụ ngwugwu

4:4:4 8/10 bit

4K60

4:2:0 | 4:2:2 | 4:4:4 8/10/12 bit

8/10/12 ibe

4K30

4:2:0 | 4:2:2 | 4:4:4 8/10/12 bit

8/10/12 ibe

HDMI 2.0 mmepụta

YUV

RGB

4K60

8 bit

4K30

8/10/12 ibe

DP 1.4 Ntinye

YUV

RGB

8K60

4:2:0 8 bit | 4:2:2 8/10 bit | 4:4:4 8/10/12 bit

8/10/12 ibe

8K30

4:2:0 | 4:2:2 | 4:4:4 8/10/12 bit

8/10/12 ibe

4K60

4:2:0 | 4:2:2 | 4:4:4 8/10/12 bit

8/10/12 ibe

4K30

4:2:0 | 4:2:2 | 4:4:4 8/10/12 bit

8/10/12 ibe

macOS

Mac Studio, M2 Max, Sonoma 15.5, HDMI2.1 / Thunderbolt 5

Windows

AMD RADEON RX7900 XT, HDMI2.1 / DP 1.4

Windows

Nvidia RTX4060, HDMI2.1 / DP 1.4

AC 100V-240V, 50/60Hz

40W

2.59 MJ / ụbọchị

0 ~ 45

15% ~ 85%

7.2kg

8.5kg

484mm × 378mm × 88.6mm

630mm × 585mm × 250mm

* Mkpebi ntinye 8K60 na mkpebi mmepụta 4K60 kwadoro; dakọtara na mkpebi ntinye/mpụta omenala ndị ọzọ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

6.2 Usoro & Nkọwa
RCA: Njikọ eji eme ihe na akụrụngwa AV nke ndị ahịa maka ma ọdịyo na vidiyo. Ụlọ ọrụ Redio nke America mepụtara njikọ RCA. BNC: guzo maka Bayonet Neill-Concelman. Njikọ eriri ejiri ọtụtụ ihe na telivishọn (aha ya maka ndị mepụtara ya). Ihe njikọ cylindrical bayoneti nke na-arụ ọrụ na ntugharị mkpọchi. CVBS: CVBS ma ọ bụ vidiyo mejupụtara, bụ mgbama vidiyo analog na-enweghị ọdịyo. A na-ejikarị CVBS eme ihe maka ịnyefe akara nkọwa ọkọlọtọ. N'ime ngwa ndị ahịa ihe njikọ na-abụkarị ụdị RCA, ebe na ngwa ọkachamara njikọ bụ ụdị BNC.
YPbPr: A na-eji kọwaa oghere agba maka nyocha na-aga n'ihu. Ma ọ bụghị ya, a maara dị ka akụkụ vidiyo.
VGA: Ihe eserese vidiyo. VGA bụ mgbama analọgụ a na-ejikarị na kọmpụta mbụ. Mgbama anaghị ejikọta ya na ụdịdị 1, 2, na 3 wee tinye ya mgbe ọ na-eji na ọnọdụ.
DVI: Igwe Ọhụụ Dijitalụ. Ọkọlọtọ njikọta vidiyo dijitalụ nke DDWG (Digital Display Work Group) mebere. Ọkọlọtọ njikọ a na-enye njikọ abụọ dị iche iche: otu nwere ntụtụ 24 na-ejikwa akara vidiyo dijitalụ naanị, yana otu nwere pin 29 na-ejikwa ma vidiyo dijitalụ na analog.
SDI: Serial Digital Interface. A na-ebu vidiyo nkọwa ọkọlọtọ na ọnụego mbufe data 270 Mbps a. A na-eji pikselụ vidiyo nwere omimi 10-bit yana 4: 2: 2 agba. Agụnyere data enyemaka na interface a ma na-agụnyekarị ọdịyo ma ọ bụ metadata ndị ọzọ. Enwere ike ibunye ọwa ọdịyo iri na isii. A haziri ọdịyo ka ọ bụrụ ngọngọ nke ụzọ abụọ stereo anọ. Njikọ bụ BNC.
HD-SDI: elu-definition serial digital interface (HD-SDI), bụ ọkọlọtọ na SMPTE 292M nke a na-enye ọnụ ọgụgụ data ọnụ ọgụgụ nke 1.485 Gbit / s.
3G-SDI: ahaziri na SMPTE 424M, nwere otu njikọ 2.970 Gbit / s nke na-enye ohere iji dochie njikọ abụọ HD-SDI.
6G-SDI: Haziri na SMPTE ST-2081 wepụtara na 2015, 6Gbit / s bitrate ma nwee ike ịkwado 2160p @ 30.
12G-SDI: Haziri na SMPTE ST-2082 wepụtara na 2015, 12Gbit / s bitrate ma nwee ike ịkwado 2160p @ 60.
U-SDI: Teknụzụ maka ịnyefe akara ngosi 8K buru ibu n'otu eriri. akara ngosi nke a na-akpọ ultra high definition signal/data interface (U-SDI) maka ịnyefe akara 4K na 8K site na iji otu eriri anya. Emebere interface ahụ dị ka SMPTE ST 2036-4.
HDMI: Igwe mgbasa ozi mgbasa ozi dị elu: interface eji eme ihe maka nnyefe vidiyo dị elu na-enweghị mgbagwoju anya, ruo 8 ọwa nke ọdịyo, na akara njikwa, n'elu otu eriri.
HDMI 1.3: Ewepụtara na June 22 2006, wee mụbaa elekere TMDS kachasị na 340 MHz (10.2 Gbit/s). Nkwado mkpebi 1920 × 1080 na 120 Hz ma ọ bụ 2560 × 1440 na 60 Hz). Ọ gbakwunyere nkwado maka 10 bpc, 12 bpc, na 16 bpc agba omimi (30, 36, na 48 bit / px), nke a na-akpọ agba miri emi.
HDMI 1.4: Ewepụtara na June 5, 2009, gbakwunyere nkwado maka 4096 × 2160 na 24 Hz, 3840 × 2160 na 24, 25, na 30 Hz, na 1920 × 1080 na 120 Hz. Tụnyere HDMI 1.3, atụmatụ 3 agbakwunyere bụ HDMI Ethernet Channel (HEC), ọdịyo

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

ọwa nloghachi (ARC), 3D karịrị HDMI, Njikọ Micro HDMI ọhụrụ, oghere agba agba gbasaa.
HDMI 2.0: Ewepụtara na Septemba 4, 2013 na-abawanye bandwidth kachasị na 18.0 Gbit/s. Akụkụ ndị ọzọ nke HDMI 2.0 gụnyere ihe ruru ọwa ọdịyo 32, ruo 1536 kHz audio s.ampugboro ugboro, HE-AAC na ụkpụrụ ọdịyo DRA, ike 3D emelitere, yana ọrụ CEC ndị ọzọ.
HDMI 2.0a: A tọhapụrụ na Eprel 8, 2015, wee gbakwunye nkwado maka vidiyo High Dynamic Range (HDR) nwere metadata static.
HDMI 2.0b: A tọhapụrụ March, 2016, nkwado maka njem HDR Video ma gbasaa akara ngosi metadata static ka ịgụnye Hybrid Log-Gamma (HLG).
HDMI 2.1 : A tọhapụrụ na November 28, 2017. Ọ na-agbakwụnye nkwado maka mkpebi dị elu na ọnụego ume ọhụrụ, Dynamic HDR gụnyere 4K 120 Hz na 8K 120 Hz.
DisplayPort: VESA ọkọlọtọ interface bụ isi maka vidiyo, kamakwa maka ọdịyo, USB na data ndị ọzọ. DisplayPort (orDP) dakọtara azụ azụ na HDMI, DVI na VGA.
DP 1.1: kwadoro na 2 Eprel 2007, na mbipute 1.1a kwadoro na 11 January 2008. DisplayPort 1.1 na-enye ohere bandwidth kachasị nke 10.8 Gbit / s (8.64 Gbit / s data ọnụego) n'elu ọkọlọtọ 4-lane isi njikọ, zuru ezu. iji kwado 1920×1080@60Hz.
DP 1.2: ewepụtara na 7 Jenụwarị 2010, bandwidth dị irè na 17.28 Gbit / s na-akwado mkpebi siri ike, ọnụego ume ọhụrụ dị elu, yana omimi agba ka ukwuu, mkpebi kachasị 3840 × 2160 @ 60Hz
DP 1.4: na-ebipụta na 1 Mar, 2016.overall nnyefe bandwit 32.4 Gbit / s ,DisplayPort 1.4 na-agbakwụnye nkwado maka Ngosipụta Stream mkpakọ 1.2 (DSC), DSC bụ a "visually loss" usoro encoding na ruo a 3: 1 mkpakọ ruru. Iji DSC na ọnụego nnyefe HBR3, DisplayPort 1.4 nwere ike ịkwado 8K UHD (7680 × 4320) na 60 Hz ma ọ bụ 4K UHD (3840 × 2160) na 120 Hz na 30 bit/px RGB agba na HDR. Enwere ike nweta 4K na 60 Hz 30 bit/px RGB/HDR na-enweghị mkpa DSC.
Multi-mode Fiber: A na-akpọ eriri nke na-akwado ọtụtụ ụzọ mgbasa ma ọ bụ ụzọ ntụgharị ihu igwe multi-mode fibers, n'ozuzu ha nwere dayameta isi nke sara mbara ma na-eji ya maka njikọ nkwurịta okwu dị mkpirikpi na maka ngwa ebe a ghaghị ibunye ike dị elu.
Otu ụdị Fiber: Fiber nke na-akwado otu ụdị ka a na-akpọ eriri otu ụdị. A na-eji eriri otu ụdị eme ihe maka ọtụtụ njikọ nzikọrịta ogologo karịa 1,000 mita (3,300 ft).
SFP: obere ụdị-factor pluggable, bụ kọmpat, na-ekpo ọkụ-pluggable netwọk interface modul eji maka ma telekomunikashions na data ngwa nzikọrịta ozi.
Njikọ Fiber Optical: na-akwụsị njedebe nke eriri anya, ma na-eme ka njikọ dị ngwa ngwa na nkwụsịtụ karịa splicing. Njikọ ndị ahụ na-arụkọ ọrụ na-ejikọta ọnụ ma dozie cores nke eriri ka ìhè nwee ike ịgafe. Ụdị njikọ eriri anya 4 kachasị adịkarị bụ SC, FC, LC, ST.
SC: (njikọ onye na-edebanye aha), nke a makwaara dị ka njikọ square bụ nke ụlọ ọrụ Japan Nippon Telegraph na ekwentị mebere. SC bụ ụdị njikọ njikọta na-adọta ma nwee dayameta 2.5mm. N'oge a, a na-ejikarị ya na eriri eriri fiber optic patch, analog, GBIC, na CATV. SC bụ otu n'ime nhọrọ kachasị ewu ewu, n'ihi na ịdị mfe ya na imewe na-abịa yana ogologo ogologo oge yana ọnụ ahịa dị ọnụ ala.
LC (Lucent Connector) bụ obere ihe njikọ (na-eji naanị 1.25mm ferrule dayameta) nke nwere snap njikọ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

usoro. N'ihi obere akụkụ ya, ọ bụ ihe dị mma maka njikọ dị elu, XFP, SFP, na SFP + transceivers.
FC: (Ferrule Connector) bụ njikọ ụdị ịghasa nwere ferrule 2.5mm. FC bụ eriri eriri eriri fiber optic nwere okirikiri, nke a na-ejikarị na Datacom, telecom, akụrụngwa nha, laser otu ụdị. ST: (Ndụmọdụ kwụ ọtọ) bụ AT&T chepụtara wee na-eji ugwu bayonet yana ferrule dị ogologo mmiri na-akwado maka eriri.
USB: Universal Serial Bus bụ ọkọlọtọ ewepụtara n'etiti 1990s nke na-akọwa eriri, njikọ na usoro nkwukọrịta. Emebere teknụzụ a iji kwe ka njikọ, nkwukọrịta na ọkọnọ ike maka ngwaọrụ na kọmpụta dị n'akụkụ.
USB 1.1: USB bandwit zuru oke, nkọwapụta bụ ntọhapụ izizi nke ndị ahịa na-anabata nke ọma. Nkọwapụta a nyere ohere bandwidth kacha nke 12Mbps.
USB 2.0: ma ọ bụ HiSpeed USB, nkọwapụta mere ọtụtụ ndozi karịa USB 1.1. Isi nkwalite bụ mmụba na bandwit ruo oke 480Mbps.
USB 3.2: Super Speed USB nwere ụdị 3 nke 3.2 Gen 1 (aha mbụ USB 3.0), 3.2Gen 2 (aha mbụ USB 3.1), 3.2 Gen 2 × 2 (aha mbụ USB 3.2) na ọsọ ruo 5Gbps, 10Gbps, 20Gbps n'otu n'otu.
Ụdị USB na ọnụ ọgụgụ njikọ:

USB 2.0

Ụdị A Ụdị B Obere A Obere B Micro-A Micro-B Ụdị C

USB 3.0

USB 3.1 & 3.2

NTSC: ọkọlọtọ vidiyo agba ejiri na North America na ụfọdụ akụkụ ụwa ndị kọmitii Standards Television Standards kọmitii mepụtara na 1950s. NTSC na-eji akara ngosi vidiyo agbakwunyere.
PAL: ahịrị ọzọ nke usoro. Ụkpụrụ telivishọn nke a na-agbanwe akụkụ nke agba agba site na ahịrị gaa na ahịrị. Ọ na-ewe onyogho anọ zuru oke (mpaghara 8) maka agba-na-horizontalimages (ubi 8) maka mmekọrịta agba-na-oke ala iji laghachi na ebe ntụnyere aka. Ngbanwe a na-enyere aka ịkagbu mperi oge. Maka nke a, njikwa hue adịghị mkpa na PAL TV set. PAL, nke a na-ejikarị eme ihe na mkpa na PAL TV set. PAL, bụ nke a na-ejikarị na Western Europe, Australia, Africa, Middle East, na Micronesia. PAL na-eji usoro mgbasa ozi agba agba 625, ubi 50 (25fps).
SMPTESociety of Motion on image and Television Engineers. Nzukọ zuru ụwa ọnụ, nke dabere na United States, nke na-esetịpụ ụkpụrụ maka nkwukọrịta visualbandband. Nke a gụnyere ihe nkiri yana ụkpụrụ vidiyo na onyonyo.
VESA: Video Electronic Standard Association. Otu nzukọ na-akwado eserese kọmputa site na ụkpụrụ.
HDCP: Ihe nchekwa ọdịnaya dijitalụ nwere bandwit dị elu (HDCP) bụ nke Intel Corporation mepụtara nke a na-ejikarị maka nchekwa vidiyo n'oge mgbasa ozi n'etiti ngwaọrụ.
HDBaseT: Ọkọlọtọ vidiyo maka nnyefe vidiyo na-enweghị mgbako (akara ngosi HDMI) yana atụmatụ ndị metụtara ya site na iji akụrụngwa cabling Cat 5e/Cat6.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

ST2110: A SMPTE ọkọlọtọ mepụtara, ST2110 na-akọwa otu esi ezipụ vidiyo dijitalụ na netwọk IP. A na-ebufe vidiyo na-ejikọtaghị ya na ọdịyo na data ndị ọzọ na iyi dị iche.
Ebumnuche SMPTE2110 bụ isi maka mmepụta mgbasa ozi na akụrụngwa nkesa ebe ịdị mma na mgbanwe dị mkpa karị.
SDVoE: Video akọwapụtara nke ọma n'elu Ethernet (SDVoE) bụ usoro maka nnyefe, nkesa na njikwa akara AV site na iji akụrụngwa TCP/IP Ethernet maka njem na obere latency. A na-ejikarị SDVoE eme ihe na ngwa ntinye. Dante AV: E mepụtara usoro Dante maka ma nakweere ya na sistemụ ọdịyo maka nnyefe nke ọdịyo dijitalụ na-enweghị mkpakọ na netwọk IP. Nkọwa Dante AV na-adịbeghị anya gụnyere nkwado maka vidiyo dijitalụ.
NDI: Network Device interface (NDI) bụ ọkọlọtọ ngwanrọ nke NewTek mepụtara iji mee ka ngwaahịa dakọtara na vidiyo nwee ike ịkparịta ụka, nyefee ma nata vidiyo dị mma nke mgbasa ozi n'ogo dị elu, nke dị ala nke na-adịchaghị mma ma dị mma maka ịgbanwee na a. gburugburu mmepụta ndụ n'elu TCP (UDP) netwọk Ethernet dabeere. A na-ahụkarị NDI na ngwa mgbasa ozi.
RTMP: Real-Time Messaging Protocol (RTMP) bụ na mbụ protocol nwe nke Macromedia (ugbu a Adobe) mepụtara maka ịkwanye ọdịyo, vidiyo na data na ịntanetị, n'etiti ihe ọkpụkpọ Flash na ihe nkesa.
RTSP : The Real Time Streaming Protocol (RTSP) bụ usoro njikwa netwọkụ emebere maka iji na ntụrụndụ na sistemụ nkwukọrịta iji chịkwaa sava mgbasa ozi mgbasa ozi. A na-eji protocol maka ịmepụta na ịchịkwa oge mgbasa ozi n'etiti isi njedebe.
MPEG: Moving Picture Experts Group bụ otu na-arụ ọrụ nke e hibere site na ISO na IEC ụkpụrụ na-emepe emepe nke na-enye ohere mkpakọ dijitalụ na ọdịyo / vidiyo.
H.264: Ọzọkwa mara dị ka AVC (Advanced Video nzuzo) ma ọ bụ MPEG-4i bụ a nkịtị video mkpakọ ọkọlọtọ. H.264 e ọkọlọtọ site ITU-T Video coding Experts Group (VCEG) ọnụ na ISO/IEC JTC1 Moving Picture Experts Group (MPEG). H.265: A makwaara dị ka HEVC (High Efficiency Video Coding)H.265 bụ onye nọchiri anya ọkọlọtọ vidiyo dijitalụ H.264/AVC ejiri mee ihe. Mepụtara n'okpuru nkwado nke ITU, mkpebi ruo 8192×4320 nwere ike abịakọrọ.
API: Ngwa Mmemme Interface (API) na-enye ọrụ akọwapụtagoro nke na-enye ohere ịnweta ike yana njiri mara ihe site na ngwanrọ ma ọ bụ ngwaike, na-enwetaghị koodu isi mmalite ma ọ bụ ghọta nkọwa nke usoro arụ ọrụ n'ime. Oku API nwere ike rụọ ọrụ yana/ma ọ bụ nyeghachi nzaghachi/akụkọ data.
DMX512: Ụkpụrụ nkwurịta okwu nke USITT mepụtara maka ntụrụndụ na usoro ọkụ ọkụ dijitalụ. Nkwenye zuru oke nke Digital Multiplex (DMX) protocol ahụla usoro eji eme ihe maka ngwaọrụ ndị ọzọ dị iche iche gụnyere ndị na-ahụ maka vidiyo. A na-ebufe DMX512 n'elu eriri nke abụọ gbagọrọ agbagọ nwere eriri 2pin XLR maka njikọ.
ArtNet: Usoro ethernet dabere na ngwugwu protocol TCP/IP, nke a na-ejikarị na ngwa ntụrụndụ/mmemme. Ewubere na usoro data DMX512, ArtNet na-enyere ọtụtụ "eluigwe na ụwa" nke DMX512 aka ibunye site na iji netwọk ethernet maka njem.
MIDI: MIDI bụ mbiri nke ngwa egwu dijitalụ Interface. Dị ka aha ahụ na-egosi na e mepụtara ụkpụrụ maka nzikọrịta ozi n'etiti ngwa egwu eletrọnịkị na kọmputa. Ntuziaka MIDI bụ ihe mkpalite ma ọ bụ iwu ezigara n'elu eriri abụọ gbagọrọ agbagọ, na-ejikarị njikọ DIN 5pin.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

OSC: Ụkpụrụ nke Open Sound Control (OSC) protocol bụ maka ịkparịta ụka n'Ịntanet ụda synthesizers, kọmputa, na multimedia ngwaọrụ maka egwu arụmọrụ ma ọ bụ ngosi akara. Dịka ọ dị na XML na JSON, usoro OSC na-enye ohere ikesa data. A na-ebufe OSC site na ngwugwu UDP n'etiti ngwaọrụ ejikọrọ na Ethernet.
Icha ọkụ na-ezokarị aka ọnụ ma ọ bụ ike ọkụ vidiyo emepụtara na ihuenyo n'agbanyeghị agba. Mgbe ụfọdụ a na-akpọ ọkwa ojii.

Ratio dị iche na nha nke ọkwa mmepụta ọkụ dị elu kewara site na ọkwa mmepụta ọkụ dị ala. Na tiori, ọdịiche dị n'etiti usoro telivishọn kwesịrị ịdịkarịa ala 100: 1, ma ọ bụrụ na ọ bụghị 300: 1. N'ezie, e nwere ọtụtụ njedebe. Ejiziri nke ọma viewỌnọdụ ọnọdụ kwesịrị iwepụta oke ọdịiche bara uru nke 30:1 ruo 50:1.
Okpomọkụ agba: Ogo agba, egosipụtara na ogo Kelvin (K), nke isi iyi ọkụ. Nke dị elu nke agba agba, ìhè na-acha anụnụ anụnụ. Na ala okpomọkụ, na-acha uhie uhie ìhè. Ọnọdụ agba agba benchmark maka ụlọ ọrụ A/V gụnyere 5000°K, 6500°K, na 9000°K.
Saturation: Chroma, uru Chroma. Ike nke agba, ma ọ bụ oke nke agba nyere na ihe oyiyi ọ bụla na-enweghị ọcha. Ka ọ dị obere na-acha ọcha na agba, otú ahụ ka agba ya na-esiwanye ike ma ọ bụ na-abawanye saturation ya. Saturation bụ ọnụọgụ pigmenti na agba, ọ bụghị ike.

Gamma: Mpụta ọkụ nke CRT abụghị ahịrị n'ihe gbasara voltage ntinye. A maara ọdịiche dị n'etiti ihe ị kwesịrị inwe na ihe a na-emepụta n'ezie dị ka gamma.
Frame: N'ime vidiyo agbakwunyere, etiti bụ otu ihe oyiyi zuru oke. Igwe vidiyo na-eji oghere abụọ, ma ọ bụ ahịrị abụọ jikọtara ọnụ. N'ime ihe nkiri, etiti bụ otu onyonyo nke usoro nke mebere onyonyo ngagharị.
Genlock: na-enye ohere ịmekọrịta ngwaọrụ vidiyo ndị ọzọ. Onye na-emepụta mgbama na-enye ụda mgbama nke ngwaọrụ ejikọrọ nwere ike ịkọwa. hụkwa Black Burst na Agba agbawa.
Blackburst: vidiyo na-efegharị efegharị na-enweghị ihe vidiyo. Ọ gụnyere mmekọrịta kwụ ọtọ, mmekọrịta kwụ ọtọ, yana ozi Chroma gbawara. A na-eji Blackburst mekọrịta akụrụngwa vidiyo iji kwado mmepụta vidiyo.
Agba agba: N'ime sistemụ TV agba, mgbawa nke ugboro ole ụgbọ ala dị na azụ nke mgbama vidiyo mejupụtara. Nke a na-eje ozi dị ka mgbaama na-emekọrịta ihe na agba iji guzobe akara ugboro na nkeji oge maka mgbama Chroma. Agba agbawa bụ 3.58 MHz maka NTSC yana 4.43 MHz maka PAL.
Agba BarsA ọkọlọtọ ule ụkpụrụ nke ọtụtụ isi agba (ọcha, odo, cyan, green, magenta, red, blue, and black) dị ka ntụaka maka nhazi usoro na ule. Na vidiyo NTSC, ogwe agba agba ndị a na-ejikarị eme ihe bụ SMPTE Ogwe agba agba. Na vidiyo PAL, ogwe agba agba a na-ejikarị eme ihe bụ ụlọ mmanya asatọ zuru oke. N'ihe nleba anya kọmputa ihe ogwe agba agba a na-ejikarị bụ ahịrị abụọ nke ogwe agba agbagharịrị.
Mgbanwe enweghị nkebi: Njirimara ahụrụ n'ọtụtụ switchers vidiyo. Njirimara a na-eme ka switcher chere ruo mgbe etiti kwụ ọtọ ka ịgbanwee. Nke a na-ezere glitch (mgbagwoju anya nwa oge) nke a na-ahụkarị mgbe ọ na-agbanwe n'etiti isi mmalite.
Ịtụle: Ntugharị nke vidiyo ma ọ bụ ihe ngosi kọmpụta site na mkpebi mmalite gaa na mkpebi ọhụrụ. A na-emekarị ịgbatị site n'otu mkpebi gaa na nke ọzọ iji bulie mgbama maka ntinye na ihe nrụpụta ihe onyonyo, ụzọ nnyefe ma ọ bụ iji kwalite ogo ya mgbe ewepụtara ya na ngosipụta.

PIP: Foto-N'ime foto. Obere onyonyo dị n'ime nnukwu onyonyo nke emepụtara site na iwetuta otu onyonyo ka ọ dị ntakịrị. Ụdị ihe ngosi PIP ndị ọzọ gụnyere Foto-Site-Foto (PBP) na Foto- With-Foto (PWP), nke a na-ejikarị eme ihe.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

na 16: 9 akụkụ ngosi ngwaọrụ. Ụdị onyonyo PBP na PWP chọrọ ihe nlere anya dị iche maka mpio vidiyo ọ bụla.
HDR: bụ usoro ike dị elu (HDR) ejiri na eserese na foto iji mepụtaghachi oke ọkụ dị ike karịa ihe enwere ike iji eserese dijitalụ ma ọ bụ usoro foto. Ebumnobi a bụ iweta ụdị ọkụ dị iche iche na nke a na-ahụ anya site na usoro anya mmadụ.
UHD: Na-eguzo maka Ultra High Definition na nke nwere ụkpụrụ telivishọn 4K na 8K nwere oke 16: 9, UHD na-agbaso ọkọlọtọ 2K HDTV. Ngosipụta UHD 4K nwere mkpebi anụ ahụ nke 3840 × 2160 nke bụ mpaghara ahụ ugboro anọ yana ugboro abụọ n'igosi vidiyo wideandheightofaHDTV/FullHD (1920 x1080).
EDID: Data njirimara ngosi agbatịgoro. EDID bụ usoro data eji eziga ozi ngosi vidiyo, gụnyere mkpebi nwa afọ yana ihe nrụtụ ume ọhụrụ chọrọ, na ngwaọrụ isi mmalite. Ngwa ngwaọrụ ga-ewepụta data EDID enyere, na-ahụ na ịdịmma onyonyo vidiyo kwesịrị ekwesị.

6.3 Akụkọ ngbanwe
Tebụl dị n'okpuru na-edepụta mgbanwe na ntuziaka onye ọrụ vidiyo.

Usoro V1.0 V1.1
V1.2

Time 2022-05-19 2023-10-10
2024-01-22

V1.3 2024-08-13 V1.4 2025-06-24

ECO# 0000# 0001# 0002#
0003 # 0004 #

Nkọwa
Mwepụta mbụ Mmelite ọrụ ihuenyo mmetụ 1. Tinye ụdị D8 PLUS 2. Tinye nhọrọ INPUT na isi Menu ọdụ ụgbọ mmiri Ethernet na ọdụ ụgbọ mmiri Genlock emepela nke ọma ugbu a. Tinye nkọwapụta ngalaba 6.1

Onye isi Aster Aster Aster
Aster Alissa

Ozi niile dị n'ime a bụ Xiamen RGBlink Science & Technology Co Ltd. ewezuga kwuru.
bụ ụghalaahia edenyere nke Xiamen RGBlink Science & Technology Co Ltd. Ọ bụ ezie na a na-eme mgbalị niile maka izi ezi n'oge mbipụta, anyị nwere ikike ịgbanwe ma ọ bụghị ime mgbanwe na-enweghị ọkwa.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Akwụkwọ / akụrụngwa

RGBlink RGB-RD-UM-D8 E003 Ngosipụta Scaler na Switcher LED Video Processor [pdf] Akwụkwọ ntuziaka onye ọrụ
RGB-RD-UM-D8 E003 Ngosipụta Scaler na Switcher LED Video Processor, RGB-RD-UM-D8 E003, Ngosipụta Scaler na Switcher LED Video Processor, Switcher LED Video Processor, LED Video Processor, Video Processor

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

RGBlink RGB-RD-UM-D8 E003 Ngosipụta Scaler na Switcher LED Video Processor

Nkọwapụta

Nchịkọta nchekwa ndị ọrụ

Akwụkwọ / akụrụngwa

Ntụaka

Hapụ ikwu

Kagbuo nzaghachi