Ntuziaka onye ọrụ Q-SYS TSC-101-G3 Touchscreen Controller

NKWAWA IHE AKWỤKWỌ

Okwu a bụ "ỊDỌ AKA NA NTỊ!" na-egosi ntuziaka maka nchekwa onwe onye. Ọ bụrụ na esoghị ntuziaka a, nsonaazụ nwere ike bụrụ mmerụ ahụ ma ọ bụ ọnwụ. Okwu a bụ "Ịkpachara anya!" na-egosi ntuziaka maka mmebi akụrụngwa anụ ahụ nwere ike imebi. Ọ bụrụ na esoghị ntuziaka ndị a, ọ nwere ike bute mmebi akụrụngwa nke enweghị ike kpuchie n'okpuru akwụkwọ ikike. Okwu ahụ bụ "Mkpa!" na-egosi ntuziaka ma ọ bụ ozi dị mkpa maka imecha usoro a nke ọma. A na-eji okwu ahụ bụ "MKWUO" gosipụta ozi ndị ọzọ bara uru.

 IHE: Ebumnobi nke ọkụ ọkụ na akara isi akụ n'ime triangle bụ ime ka onye ọrụ mara maka ọnụnọ nke vol "dị ize ndụ" enweghị mkpuchi.tage n'ime mkpuchi ngwaahịa nke nwere ike ịdị oke zuru oke iji bụrụ ihe egwu nke ujo eletrik nye ụmụ mmadụ.

 IHE: Ebumnobi nke mkpu mkpu n'ime triangle nhata bụ ime ka onye ọrụ mara maka ọnụnọ nchekwa dị mkpa, na ntuziaka ọrụ na mmezi n'ime akwụkwọ ntuziaka a.

Ntuziaka nchekwa dị mkpa

1. Gụọ ntuziaka ndị a.
2. Debe ntuziaka ndị a.
3. Ṅaa ntị n'ịdọ aka ná ntị niile.
4. Soro ntuziaka niile.
5. Ejila ngwa a n'akụkụ mmiri.
6. Jiri akwa kpọrọ nkụ hichaa naanị.
7. Akwụsịla oghere ikuku ikuku ọ bụla. Wụnye dị ka ntuziaka onye nrụpụta si dị.
8. Awụnyela n'akụkụ ebe okpomọkụ ọ bụla dị ka radiators, ndekọ okpomọkụ, stovu, ma ọ bụ ngwa ndị ọzọ (gụnyere ampilifiers) na-emepụta okpomọkụ.
9. Jiri naanị mgbakwunye / ngwa ndị nrụpụta akọwapụtara.
10. Tụtụ aka n'aka ndị ọrụ ruru eru.
11. Soro koodu mpaghara niile dị.
12. Kpọtụrụ onye injinia nwere ikike, ọkachamara mgbe obi abụọ ma ọ bụ ajụjụ ọ bụla bilitere gbasara nrụnye akụrụngwa anụ ahụ.

Nkwupụta FCC

 IHE: A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ Klas B, dabere na akụkụ 15 nke Iwu FCC. ntinye ebe obibi. Akụrụngwa a na-emepụta, na-eji ma nwee ike ịgbasa ike ugboro redio na, ọ bụrụ na ọ bụghị

 IHE: Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na arụnyere ma jiri ya dịka ntuziaka ahụ siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:

• Megharịa ma ọ bụ bugharịa antenna nnata.
• Mee ka nkewa dị n'etiti akụrụngwa na nnata.
• Jikọọ akụrụngwa na-enweta ike n'ime oghere dị na sekit dị iche na nke ejikọrọ onye nnata.
• Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.

A na-adọ gị aka na ntị na mgbanwe ma ọ bụ mgbanwe ndị akụkụ na-ahụ maka nnabata anabataghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa ahụ.

Nkwupụta Ngosipụta Radiation FCC RF
Ngwaọrụ a nwere ndị na-ebugharị na nnata nke na-ebunye ike Frequency Radio (RF). Emebere ngwaọrụ a ka ọ kwado oke maka ikpughe na ike RF nke Federal Communications Commission (FCC) nke United States, Industry Canada (IC) nke Canada, na ụlọ ọrụ na-achịkwa nke obodo ndị ọzọ setịpụrụ.

Nkwupụta ụlọ ọrụ Canada
Ngwaọrụ a na-akwado ikikere ụlọ ọrụ Canada -ndị na-enweghị RSS. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:

1. ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya, yana
2. Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla, gụnyere nnyonye anya nke nwere ike ibute mmebi ngwaọrụ na-achọghị.

Nkwupụta Mkpughe Radiation
Ngwaọrụ a nwere ndị na-ebugharị na nnata nke na-ebunye ike Frequency Radio (RF). Emebere ngwaọrụ a ka ọ kwado oke maka ikpughe na ike RF nke Federal Communications Commission (FCC) nke United States, Industry Canada (IC) nke Canada, na ụlọ ọrụ na-achịkwa nke obodo ndị ọzọ setịpụrụ.

Ozi E-Label

A na-egosipụta asambodo zuru ụwa ọnụ na ihuenyo mmalite.
Ụdị No. : TSC-70-G3 FCC ID: 2AGTY-TSC-70-G3 IC: 20383-TSC70G3
Ụdị No. NJ TSC-101-G3 FCC: 2AGTY-TSC-70-G3, IC: 20383-TSC70G3

Mgbe ịbanye na ihuenyo bụ isi nke ị nwere ike họrọ bọtịnụ Agency iji weghachi ihuenyo E-Label.

Nkwupụta nke RoHS

Usoro QSC Q-SYS TSC-G3 dabara na ntuziaka European 2011/65/EU — mmachi nke ihe dị ize ndụ (RoHS2).

Nlekọta na mmezi

Ịdọ aka ná ntị!: Teknụzụ dị elu, iji ihe ọgbara ọhụrụ na ngwa eletrọnịkị dị ike, chọrọ nrụzi na ụzọ nrụzi pụrụ iche. Iji zere ihe egwu nke mebie ngwa, mmerụ ahụ na mmadụ na/ma ọ bụ imepụta ihe egwu nchekwa ndị ọzọ, ọrụ niile na-arụzi ma ọ bụ nrụzi na ngwa kwesịrị ịrụ ya naanị site na ọdụ ọrụ ikike nke QSC ma ọ bụ onye nkesa QSC International nyere ikike. QSC abụghị maka mmerụ ahụ, mmerụ ahụ ma ọ bụ mmebi metụtara ya na-esite na ọdịda nke onye ahịa, onye nwe ma ọ bụ onye ọrụ nke ngwa iji kwado nrụzi ndị ahụ.

Usoro ndụ ngwaahịa a tụrụ anya ya: Afọ 10, Oke nchekwa nchekwa: -20°F ruo +70°F, iru mmiri dị n'etiti: oke nke 5 – 85% RH na-abụghị condensing.

Akwụkwọ ikike

Maka otu akwụkwọ ikike nwere oke QSC, gaa na QSC, LLC., websaịtị na www.qgsc.com.

Ihe ngwugwu

1. 5.0 ″ TSC TSC-60-G3
   
2. Otu otu òtù mgbịrịgba Ugwu Ugwu
   
3. Skru #6-32, 38mm [1.5′])
   
4. Ụdị Mgbidi-Ugwu
   
5. Screwdriver
   
6. NFC Tag
   
7. Akwụkwọ ikike ikike nke QSC Limited
   
8. Nkwupụta nchekwa na usoro iwu
   

TSC-70-G3 / TSC-101-G3

1. 7.0 ″ TsC/ 10.1 ″ TSC TSC-70-G3 ma ọ bụ TSC-101-G3
   
2. Mgbochi Mgbidi Ugwu Abụọ
   
3. kposara #6-32, 38mm [1.5″])
   
4. Ụdị Mgbidi-Ugwu
   
5. Screwdriver
   
6. NFC Tag
   
7. Akwụkwọ ikike ikike nke QSC Limited TD-000453
   
8. Nkwupụta nchekwa na usoro iwu TD-001619
   

Nkọwa

The TSC-G3 usoro Touchscreen Controllers na-ejikọta projective capacitive multi-aka technology na obosara format elu definition ma ọ bụ zuru elu nkọwa 24-bit agba ngosi. Ụdị usoro TSC-G3 niile na-enweta ike ha naanị site na Power over Ethernet (PoE) maka ntinye otu eriri dị mfe. Usoro TSC-G3 Touchscreen Controllers nwere ike ịrụ ọrụ na nhazi ihu ala ma ọ bụ ihe osise na-enye mgbanwe nhazi ọzọ mgbe ị na-etinye na mgbidi, ụlọ akwụkwọ ma ọ bụ elu dị larịị yiri ya. Emebere ụdị TSC-50-G3 ka ọ banye n'otu ọkọlọtọ otu unit (otu òtù) US ma ọ bụ igbe eletriki Europe, ebe ụdị TSC-70-G3 na TSC-101-G3 ka emebere ka ọ banye n'ime otu ọkọlọtọ okpukpu abụọ (otu abụọ) igbe eletriki US ma ọ bụ igbe NEMA dị iche iche. A na-enye ihe nkwado nrịgo na ụdị TSC-G3 Touchscreen Controller nke ọ bụla iji nabata igbe eletrik dị n'ime mgbidi dị iche iche, ugwu elu ma ọ bụ nhazi nhazi ọzọ. Usoro TSC-G3 Touchscreen Controllers na-enye ikuku nso-Field Communications (NFC) kwekọrọ na ụkpụrụ NDEF, 1SO, |IEC na FELICA na-akwado ọtụtụ nchekwa, nyocha na ngwa mmetụ aka na-enweghị aka ma ọ bụ oke. Usoro TSC-G3 Touchscreen Controllers na-enye ihe mmetụta ọkụ ambient (ALS) nke enwere ike ịhazi maka ijikwa nchapụta panel, ihe nchekwa ihuenyo ma ọ bụ ohere onye ọrụ dabere na ọnọdụ ọkụ ambient. Ụdị TSC-70-G3 na TSC-101-G3 Touchscreen Controller gụnyere ihe mmetụta nchọpụta nso nke enwere ike ịhazi iji jikwaa ịnweta panel ma ọ bụ kpalite mmemme ma ọ bụ ọrụ dabere na ọnụnọ onye ọrụ na/ma ọ bụ ọnụnọ ụlọ. Ụdị TSC-70-G3 na TSC-101-G3 Touchscreen Controller na-enyekwa ọdụ ụgbọ mmiri Ụdị C nke na-akwado nkwado ọdịyo na/ma ọ bụ vidiyo na / site na Q-LAN. Ọzọkwa, TSC-70-G3 na TSC-101-G3 Touchscreen Controller ụdị na-enye ọkaibe ọnụ ụlọ LEDs nwere programmable 24-bit agba amụma na-configurable site QSC's Q-SYS Designer Room Scheduling tools. Ngwa TSC-G3 usoro Tabletop Stand dị maka ụdị njikwa TSC-G3 Touchscreen niile.

Atụmatụ TSC-50-G3

Ogwe azụ

1. Docking Igwe Ọdụdọ
2. RJ45, PoE/+ in
3. Ikuku ikuku

Profile

1. Ebe rịgoro maka braket Ugwu Mgbidi
2. Usoro akara

Ogwe ihu

1. Ihe mmetụta ọkụ Ambient
2. NFC Antenna
3. 5 ″, 1280×720 Ngosipụta

TSC-70-G3 /| TSC-101-G3 n'azụ & Akụkụ akụkụ

Ogwe azụ

1. Docking Igwe Ọdụdọ
2. RJ45, PoE/+ in
3. USB Ụdị C
4. Ikuku ikuku

Profile

1. Ihe ngosi ọkwa ọkwa ụlọ
2. Ebe rịgoro maka braket Ugwu Mgbidi
3. Usoro akara

TSC-70-G3 / TSC-101-G3 Akụkụ ihu

Ogwe ihu

1. Sensọ nso
2. Ihe mmetụta ọkụ Ambient
3. NFC Antenna
4. 7, 1280×800 Ngosipụta

Ogwe ihu

1. Sensọ nso
2. Ihe mmetụta ọkụ Ambient
3. NFC Antenna
4. 10.17, 1920×1200 Ngosipụta

TSC-50-G3 n'ime mgbidi mgbakwasa

IHE: Ị nwere ike t%&t TSC-50-G3 na nhazi ihu ala mgbe / nkwụsịtụ bo'\ portrait orientation, na vise-versa.

Igbe eletrịkị etinyegoro nke ọma n'usoro ihe osise. Ngosipụta ihe ngosi a tụgharịrị na Q-SYS Designer.

1. Mal! \ge Q-LAN cable (3) (CAT-6 / RJ-45), na-arụnyere na elu (2) na sufficiégt ogologo inye kwesịrị ekwesị nchegbu enyemaka.
2. Gbaa eriri ahụ site na otu oghere oghere na igbe eletriki (1) na site na oghere dị n'etiti etiti nkwụnye nkwụnye (4).
3. Kwado ihe nkwado mgbago na igbe eletrik na taabụ mkpọchi nchekwa (5) na-atụ aka na mgbidi ahụ.
4. Jiri skru abụọ ewepụtara (6) chekwaa ihe nkwado mgbago na igbe eletrik.
   
   IHE: |[Ọ bụrụ na ị na-eji igbe eletrọnịkị gburugburu, anaghị enye skru iji chekwaa ihe nkwado na-agbago na igbe eletrik.
5. Jikọọ eriri Q-LAN (RJ45) (1) na ebe nchekwa dị n'azụ TSC (2). Rụtụ aka na eserese 6.
6. Jiri screwdriver Phillips (#0) ka ịtọghe skru mkpọchi (3) na nsọtụ abụọ nke TSC.
7. Jiri nlezianya tinye eriri ngafe n'ime igbe eletrik (1) wee jikọta TSC na brackel mkpọ (2). Ị ga-anụ ntakịrị ọpịpị mgbe arụrụ arụrụ nke ọma. Q}
8. Jiri screwdriver Phillips (#0) mee ka skru mkpọchi (3) sie ike na nsọtụ abụọ nke TSC.
   

TSC-70-G3 / TSC-101-G3 Nbanye n'ime mgbidi
A na-eju akwa mgbidi na-arị elu maka ịrịgo na ọkọlọtọ US okpukpu abụọ nke njikọ na eserese ma ọ bụ | cape na nrụnye dị ugbu a. Tụkwasị na nke ahụ, mgbanaka mgbanaka elu na tem e nyere maka ịkwanye n'elu elu na-enweghị nkwụsị nke dị ugbu a bo; Ndị na-esonụ e na-eji mgbanaka ịrị elu elu (gụnyere) na TSC arụnyere na pe orientation. A na-achịkwa nghazi ngosi na Q-SYS Designer.

Wụnye mgbanaka mgbanaka elu

1. Jiri ihe nchọta stud ma ọ bụ nyocha ka ịchọta ebe mgbago kwesịrị ekwesị. N'èzí mgbidi ahụ, jide n'aka na ahụ nke TSC adịghị arụ ọrụ n'ime ọnụ ụzọ, ọnụ ụlọ, windo, wdg. Jiri ihe ndị a maka nhazi:
   • Odida obodo - Gbaa mbọ hụ na enwere opekempe 1.5 na (38.1 mm) maka TSC-70-G3, yana 3.5 na (88.9 mm) maka nnabata TSC-101-G3 n'akụkụ nke ọ bụla nke ndebiri.
   • Eserese - Gbaa mbọ hụ na enwere opekempe 1.5 na (38.1 mm) maka TSC-70-G3, yana 3.5 na (88.9 mm) maka nnabata TSC-101-G3 n'elu na n'okpuru ndebiri.
2. Ọ bụrụ na ederede dị na template ziri ezi, ndebiri dị na nhazi ihu ala. Pịa template na mgbidi na nghazi nke ịchọrọ.
3. Jiri mma ọrụ dị nkọ bee n'akụkụ mpụta nke oghere ndị dị na template.
4. Wepu template ma mechaa bepụ oghere ahụ. Ihe mmeghe ekwesịghị ịbụ ihe karịrị 4 na x 4 na (101.6 mm x 101.6 mm).
5. Jiri ahịrị gbagọrọ agbagọ dị ka ntụaka iji dozie mgbanaka mgbago elu nke ọma.
   • Ụdị ọdịdị ala - ebe ntụaka bụ vetikal.
   • Eserese mode — ntụaka ihe bụ kehoraizin.
     
6. Jide n'aka na eriri Q-LAN (4), etinyere na mgbidi ma ọ bụ podium, wdg na ogologo zuru ezu iji nye enyemaka nchekasị kwesịrị ekwesị.
7. Gbapụ eriri ahụ na mgbidi ahụ, na site na mgbanaka mgbanaka elu (1)
8. Jide n'aka na ntị nkịta abụọ, (2) na (3), na-apịaji ka ha ghara igbochi mgbidi ahụ mgbe etinyere mgbanaka ahụ.
9. Kwado mgbanaka mgbanaka elu na oghere a na-egbutu na mgbidi, ma tinye ya n'ime oghere. Q'
10. Jiri Phillips screwdriver mee ka ntị nkịta sie ike 'b(' megide n'ime mgbidi ahụ. Ka ị na-eme ka sorg ahụ sie ike, ntị nkịta na-atụgharị na vetikal na cl).amped ọnọdụ ( A na-egosi na ntị nkịta ala adịghị ike (6)

Akụkụ

Nkọwapụta

Mkpebi	HD (1280 x 720)                                         I	WXGA (1280 x 800)                                    I WU/MA (1920 x 1200)
Akụkụ akụkụ	16:9	16 10
Agba	16.7M (24-bit)
Ọnụọgụ dị iche	800:1	850:1	800:1
Icha ọkụ	450 nits	400 nits	380 nits
ViewMpaghara nwere ike (diagonal)	4.99 ″	7.00′	10.07′
Akụkụ (H4W), sentimita asatọ	3.18 x5.55	4.53 x7.28	6.24 x9.97
Akụkụ (1-1xW). millimeters	80.7 x141.0	115.0 x185.0	158.5 x253.2
Ntorobia	PCAP, 5.pos
Nhazi	Okirikiri ala ma ọ bụ Eserese
Ogwe azụ I/0:LAN, PoE/. (ntinye ike)	1 Gbps, Ch AN (data)	1 Gbps, D.LAN (data, mgbasa ozi)
U58 Ụdị C	n/a	USB 3.1, ruo 5 Gbps, 5V ®0.5a pụọ
Sensọ: Ambient Light	* 50′ D 550nm kacha mma	* 50′ # 500-850nm kacha mma
Ịbịa nso Nchọpụta		10cm n'ahịrị
Ndị na-egosi: LAN	Unk/Arụmọrụ (Ikanam aka ekpe), Ọsọ (Ikanam aka nri)
Njikọ/Ihe omume	Gbanyụọ .1 enweghị njikọ, odo odo siri ike • Unk, odo na-egbu maramara = Ọrụ
Ọsọ	Gbanyụọ • 10 Mbps, Yellow • 100 Mbps, Green • 1 Gbps
Mkpọsa ụlọ	24-bit, mmemme, nchapụta dị elu
NEC: Ike	Onye na-agụ akwụkwọ, Onye mmalite
Antenna (W x L)	6.0mm 60mm	6.0mm x 70mm
Ike. PoE/PoEt	IEEE 802.31d. klas 2	IEEE *Ost. klas 4	IEEE 802 3at, klas 4
gburugburu:Oke okpomoku na-arụ ọrụ	Ot - 50'C (321 - 122F)
Na-arụ ọrụ Iru mmiri dị nso	5% ruo 85% RH, na-abụghị condensing
Oke Okpomọkụ Nchekwa	-20'C ruo +71:11Y (-4'F - 1581)
BTU / h	18 Ọ na-ahụkarị                                                                                  26 Ọ na-ahụkarị               I 47 Ụdị
Mmaji	18 Nri kacha nta
Ịkwanye:Igwe eletrik dị n'ime mgbidi Igbe	Single Unit US ma ọ bụ EU	Ugboro abụọ US ma ọ bụ NEMA
Ugwu elu_	Jiri Nchikota Mgbodo Otu Otu	Jiri mkpịrịkọ nkeji abụọ ewepụtara
Tebụl kacha elu (ihe mgbakwunye nhọrọ)	Obere (STT-G3)	Ọkara IMTT-63)
Tebụl Top kwụ n'usoro	Okirikiri ala ma ọ bụ Eserese	Okirikiri ala
Arọ:Ibu ngwaahịa (ụgbụ)	9.134a. (249 g)	19.9 oz. (564 g)	33.4 ma ọ bụ. (947 g)
Ibu ibu ibu (nnukwu)	17A oz. (493 g)	31.9 oz. (905 g)	45.4 oz. (1288 g)

Adreesị nzipu ozi:
QsC, LLC
1675 MacArthur Boulevard
Costa Mesa, CA 92626-1468 US
Nọmba isi: +1.714.754.6175
Gburugburu ụwa Web: www.qsc.com

Ahịa & ire ahịa:
Olu: +1.714.957.7100 ma ọ bụ ọnụ ọgụgụ efu
(US naanị) +1.800.854.4079
FAX: +1.714.754.6174
Email: info@qsc.com

asc
Ọrụ nka
1675 MacArthur Bivd.
Costa Mesa, CA 92626 US
Tel: +1.800.772.2834 (US naanị)
Tel: +1.714.957.7150
FAX: +1.714.754.6173Q-SYS™ Nkwado ndị ahịa:
Ngwa Injinia na Ọrụ nka
Monday - Fraịdee 7 AM ruo 6 PST (Ewezuga ezumike)
2417
Nkwado ndị ahịa QSYS™
Tel. +1.800.772.2834 (US naanị)
Tel. +1.714.967.7150
Q-SYS 24/7 Nkwado Mberede*®
Tel: +1.888.252.4836 (US/Canada)
Tel: +1.949.791.7722 (abụghị US)
* Nkwado Q-SYS 24/7 bụ maka enyemaka mberede na sistemụ Q-SYS
naanị. Nkwado 24/7 na-ekwe nkwa ịkpọghachi azụ n'ime nkeji 30 ka a
a hapụrụ ozi. Biko tinye aha, ụlọ ọrụ, nọmba azụ oku na
nkọwa nke ihe mberede Q-SYS maka ịkpọghachi ngwa ngwa. Ọ bụrụ na-akpọ n'oge
oge ọrụ biko jiri nọmba nkwado ọkọlọtọ dị n'elu.
Email Nkwado Q-SYS
gsyssupport@gsc.com
(Oge nzaghachi email ozugbo anaghị ekwe nkwa)

Akwụkwọ / akụrụngwa

Q-SYS TSC-101-G3 Touchscreen Controller [pdf] Ntuziaka onye ọrụ TSC-70-G3, TSC-101-G3, TSC-101-G3 Touchscreen Controller, TSC-70-G3 Touchscreen Controller, TSC-50-G3 Touchscreen Controller, Touchscreen Controller, Onye njikwa.

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ