Akwụkwọ ntuziaka Pro-Ject Primary E Turntable Ntuziaka

Pro-Ject Primary E Turntable

Nkọwa nka na ụzụ

Technical specifications Pro-Ject Primary E / Pro-Ject 8.6E

• Ọsọ ọsọ 33/45 rpm
• Ọdịiche ọsọ 33: 0,80% 45: 0,70%
• Chaị ma na-efegharị 33: 0,29% 45: 0,27%
• Mgbama maka mkpọtụ -65dB
• Uka tonearm dị irè 8g
• Ogologo ụda olu dị irè 8,6 ″ (218,5mm)
• Ihe karịrị 22mm
• Ike oriri 4.5W
• Power cord suitable for your country’s mains supply (EU, UK, US, AUS)
• Dimensions (W x H x D) 420 x 112 x 330mm (WxHxD)
• Ibu 4.0kg

Technical specifications MM-Cartridge Ortofon OM

• Ugboro ugboro 20-22.000Hz
• Nkewa nke ọwa 20dB/1kHz
• Mmepụta voltagihe 4.5mV
• Ibu akwadoro
• impedance
• 47 kohms /ampnjikọ lifier – MM-ntinye
• Compliance/stylus type 20μm/mN – Spherical
• Ike akwadoro 17.5mN
• Ibu 5g

Njikwa, atụmatụ na njikọ

1. Mgbanwe ọkụ
2. Stepped drive pulley and drive belt *
3. Platter nwere ute nwere mmetụta*
4. Tonearm counterweight
5. Tonearm lift lever
6. Tonearm izu ike na mkpọchi mbugharị mbugharị
7. Tonearm tube
8. Headshell with finger lift and pre-mounted Ortofon OM
9. Mkpuchi
10. Ihe mkpuchi mkpuchi
11. Ihe mkpuchi mkpuchi
12. Ụdọ ọkụ (dabara maka isi obodo gị)
13. Igwe nrụpụta mgbaàmà
    igodo Allen 1.5mm (egosighi ya)*
    Otu nkwụnye ọkụ (anaghị egosi)*

Ezigbo onye hụrụ egwu,

• Ekele na ekele gị maka ịhọrọ ihe ọkpụkpọ Pro-Ject Audio Systems.
• Your Primary E turntable has been handcrafted and rigorously tested by skilled technicians to give you years of enjoyable, trouble free service.
• Biko kpọtụrụ onye na-ere ahịa gị ma ọ bụrụ na ịchọrọ enyemaka ọzọ.

Ihe dị mkpa:
Ebupula ihe ntụgharị gị n'otu akụkụ ka ọ ghara imebi akụkụ ndị nwere mmetụta. Biko lelee ozugbo ka ijide n'aka na ọ nweghị nkwakọ ngwaahịa ma ọ bụ ngwaọrụ mebiri emebi na njem. Ọ bụrụ na akụkụ ahụ na-efu ma ọ bụ ọ bụrụ na unit ahụ mebiri emebi, biko arụla ọrụ ma kpọtụrụ onye na-ere ahịa gị.

Ntuziaka nchekwa

• A na-eji ụdọ ọkụ ahụ jikọọ ma kwupu akụkụ ahụ na isi. Jide n'aka na nkwụnye ahụ dị mfe ịnweta oge niile. Jide plọg mgbe ị na-ewepụ eriri ọkụ. Ejikwala eriri ike mgbe aka gị dị mmiri ma ọ bụ damp.
• Zere ikwe ka mmiri banye na ngwaọrụ. Etinyekwala ihe ọ bụla nwere mmiri mmiri, dị ka ite okooko osisi, na ma ọ bụ n'akụkụ ngwaọrụ ahụ. Akwụsịla mmiri ọ bụla na ngwaọrụ ahụ. Etinyekwala isi ọkụ ọ bụla gba ọtọ, dị ka kandụl na -enwu enwu, na ma ọ bụ n'akụkụ ngwaọrụ ahụ. Agaghị eji ngwaahịa a na damp ma ọ bụ ebe mmiri mmiri, n'akụkụ ebe ịsa ahụ, sink, ọdọ mmiri ma ọ bụ ọnọdụ ndị ọzọ yiri ya.
• Debe akpa rọba n'ebe ụmụaka nọ iji gbochie ihe ize ndụ ọ bụla nke ịnwụ anwụ.

Platter na draịva belt ntinye
Biko wepụ ihe ntinye akwụkwọ nchara nchara nke na-ejide efere ahụ n'ọnọdụ mbufe. Tinye ute ahụ nwere mmetụta n'elu efere ahụ. Wụnye eriri mbanye dị ka egosiri na ihe atụ na-esonụ.

Katrij downforce mmezi

• Ihe mgbochi (8) wetara dị mma maka cartridges dị n'etiti 3 - 7g (ihe dị nr. 81). A na-edozi counterweight n'ụzọ zuru oke site na ụlọ ọrụ mmepụta ihe.
• Ọ bụrụ na ịchọrọ ịtọ ike nsochi, biko gụọ ntuziaka ndị a:
• Place the stylus pressure gauge onto the platter. To adjust the amount of pressure, carefully move the counterweight along the support rod, until the stylus pressure is sufficient to raise the pressure gauge to the level position.
• Moving the counterweight away from the cartridge will reduce pressure and towards will increase pressure. Finally secure the counterweight using hexagonal key provided.
• Ọ bụrụ na nlele stylus na-aghọ ọkwa, mgbe ahụ, enwetala nrụgide ziri ezi. Agbanyeghị, ọ bụrụ na nrụgide ezughị oke ma ọ bụ oke oke, nlele ahụ agaghị agagharị ma ọ bụ gbadaa ala.

Njikọ na ampna -emegharị ihe

• Onye ọkpụkpọ ndekọ ahụ nwere ụzọ mgbama ụda ụda ejidere (11) maka njikọ na amplifier. Use the Phono input (sometimes labelled gram, disc or RIAA) on your ampna -emegharị ihe. Gbaa mbọ hụ na ntinye phono na -enye nha dabara adaba yana amplification maka ụdị katrij eji. Ntinye ahịrị (dị ka CD, Tuner, teepu ma ọ bụ vidiyo) adabaghị.
• Lezie anya maka ijikọ ọwa aka ekpe na aka nri n'ụzọ ziri ezi. A na -ejikarị ọwa aka nri akara uhie, ọwa ekpe bụ oji ma ọ bụ ọcha. Lelee akwụkwọ ntuziaka gị amplifier for relevant information. An earthing wire may be  connected to the screw terminal between the sockets if you encounter humming problems.
• Ọ bụrụ na gị amplifier enweghị ntinye dabara adaba maka katrij phono ị ga-achọ phono dị iche amponye na -eme stage maka MM ma ọ bụ MC cartridges nke na-ejikọta ya n'etiti ọkpụkpọ ndekọ na ntinye larịị ahịrị efu nke ampna -emegharị ihe.
• Maka ozi ngwaahịa zuru ezu gbasara Pro-Ject Audio Phono Ampbiko rụtụ aka na Pro-Ject web saịtị www.project-audio.com.

Njikọ ike isi

The turntable is supplied with a power cord suitable your country’s mains supply. Connect the power cord to the mains.

• Na-adaba mkpuchi
  Tinye mkpuchi (mkpuchi uzuzu) nke ọma n'elu ihe mkpuchi mkpuchi ma dozie skru (9) ruo mgbe mkpuchi ga-emeghe ebe ịchọrọ ya na-enweghị isi ike imeghe ma ọ bụ mechie.
• Ịgbanye na gbanyụọ
  Ịpị ọkụ ọkụ (1) na-amalite ọzọ ma ọ bụ kwụsị moto.

Na-agbanwe ọsọ mkpọgharị
Tinye eriri n'elu akụkụ dayameta ka ukwuu nke moto pulley (2). Ka ịlaghachi na 33 rpm megharịa usoro ahụ site na iji obere nzọụkwụ na pulley.

Nlekọta na ihicha

• Ihe ọkpụkpọ ndekọ gị chọrọ obere mmezi ma ọ bụ enweghị mmezi oge niile. Wepu uzuzu site na iji akwa mgbochi mmiri nwere ntakịrị mmiri. Ejila akwa akọrọ eme ihe n'ihi na nke a ga-emepụta ọkụ eletrik nke na-adọtakwu uzuzu! Mmiri ihicha nke antistatic dị na ụlọ ahịa ndị ọkachamara mana a ga-etinyerịrị ya obere oge iji zere imebi akụkụ rọba. A na-atụ aro ka ọ dabara na mkpuchi agịga tupu ihicha ma ọ bụ arụ ọrụ iji zere mmebi.
• Ọ bụrụ na ejighị ihe ọkpụkpọ ahụ ogologo oge, enwere ike iwepụ eriri mbanye ka ọ gbochie ịgbatị na-enweghị nha.

Idozi na ijikọ katrij
Enwere ike ịwụnye katrij niile nwere oghere ịrịgo ọkara nke anụ ọhịa. Hapụ mkpuchi mkpuchi agịga ahụ, tinye katrijị ya na isi okwu site na iji kposara enyere ya site na ịgafe otu ihe nkedo site na oghere ọ bụla na isi isi (8). Emela ka mkpụrụ ahụ sie ike.

Jikọọ wired tonearm na ntụtụ katrij dị ka ndị a:

• ezigbo ọwa aka ekpe ọcha (L+)
• Ọwa ziri ezi (R+)
• nloghachi ọwa akanri green (R -)
• nloghachi ọwa aka ekpe na-acha anụnụ anụnụ (L -)

Enwere ike ịnweta ụda olu zuru ezu nke onye ọkpụkpọ egwu ma ọ bụrụ na a na-edozi katrij ahụ n'ụzọ ziri ezi. Achọrọ ngwaọrụ pụrụ iche dịka ngwa mgbakwunye usoro Pro-Ject Audio iji rụzuo ọrụ a nke ọma. Ọ bụrụ n’ịmatabeghị mgbanwe nke cartridges ahụ, biko kpọọ maka enyemaka onye na-ere gị Pro-Ject Audio Systems.

Biko rụba ama: imeghari katrij na ụda olu na-akpọ oku ka ọ bụrụ nlekọta kacha mkpa iji gbochie mmebi katrij ma ọ bụ ụda olu. Jụọ onye na-ere ahịa na mpaghara gị ka o nyere gị aka ma ọ bụrụ n’inweghị obi abụọ na usoro ọ bụla dị mkpa na ịkpachapụ anya nke aga-emerịrị.

Ndụmọdụ bara uru
Ekwesịrị itinye ihe ọkpụkpọ egwu ahụ n'elu ala na-ada ụda dị ka osisi ma ọ bụ ọtụtụ mbadamba ihe eji eme ihe iji zere usoro mkpọtụ na-enye nsogbu.

Enwere ike iji ezighi ezi yana ọnọdụ mmejọ

• A na-arụpụta pro-Ject turntables ka ọ bụrụ ụkpụrụ kachasị elu ma na-achịkwa njikwa dị mma tupu ịhapụ ụlọ ọrụ ahụ. Mmejọ ndị nwere ike ime abụghị n'ihi mmejọ ihe ma ọ bụ mmepụta mana enwere ike bute ya mgbe ụfọdụ site na iji ezighi ezi ma ọ bụ ọnọdụ ọjọọ. Ya mere ndepụta na-esonụ nke mgbaàmà mmejọ na-emekarị gụnyere.
• Efere adịghị atụgharị ọ bụ ezie na agbanyere unit ahụ:
• Ejikọtaghị unit ahụ na isi iyi ọkụ. Enweghị mains na oghere.
• Etinyela eriri mbanye ma ọ bụ amịpụla.

Enweghị mgbaama site na otu ọwa ma ọ bụ ọzọ ma ọ bụ ọwa abụọ: 

• Enweghị kọntaktị ọ bụla site na katrij gaa na eriri ụda ụda n'ime ma ọ bụ site na nke ahụ gaa na ogwe aka ma ọ bụ site na nke ahụ gaa na igbe phono ma ọ bụ n'etiti nke ahụ na amponye ndu. Nke a nwere ike ịbụ n'ihi plọg na-ezighi ezi, waya gbajiri agbaji ma ọ bụ nkwonkwo solder ma ọ bụ naanị njikọ plọg / oghere rụrụ arụ.
• A họrọghị ntinye phono na ampna -emegharị ihe.
• Ampagbanyụ ọkụ.
• Amponye na-ekwu okwu nwere ntụpọ ma ọ bụ mechie ọnụ.
• Enweghị njikọ na igwe okwu.

Ọkụ dị ike na ntinye phono:

• Enweghị njikọ ụwa site na katrij ma ọ bụ ogwe aka ma ọ bụ eriri aka amplifier, ma ọ bụ loop ụwa. Ụda gbagọziri ma ọ bụ na-ekwekọghị ekwekọ site na otu ọwa ma ọ bụ abụọ:
• Ejikọtara ọkpọ ndekọ na ntinye adịghị mma nke amplifier, ma ọ bụ MM/MC ịgbanwee ezighi ezi. Agịga ma ọ bụ cantilever mebiri.
• Wrong r.p.m., drive belt is overstretched or dirty, platter bearing without oil, dirty or damaged.

Ọrụ

• Ọ bụrụ na ị zutere nsogbu nke ị na-enweghị ike ibelata ma ọ bụ chọpụta n'agbanyeghị ozi dị n'elu, biko kpọtụrụ onye na-ere gị maka ndụmọdụ ọzọ. Naanị mgbe enweghị ike idozi nsogbu ahụ, a ga-ezigara unit ahụ na onye na-ekesa ọrụ na obodo gị.
• A ga-arụkwa ọrụ nkwenye naanị ma ọ bụrụ na eweghachiri ngalaba ahụ nke ọma ngwugwu. Maka nke a, anyị na-akwado idobe nkwakọ ngwaahịa mbụ.
• Eweghachila ihe ọkpụkpọ ndekọ na-ejideghị n'aka na a chịsara ya nke ọma ma tinye ya nke ọma na nkwakọ ngwaahịa mbụ dịka eserese dị na ibe ikpeazụ nke ntuziaka onye ọrụ a.
• Dakọtara okpu nchebe katrij na mkpọchi njem maka tube nke tonearm (66), tupu ejiri nlezianya chịkọta ihe ọkpụkpọ ndekọ.

Akwụkwọ ikike

Onye nrụpụta ahụ anabataghị ọrụ ọ bụla maka mmebi kpatara ịghara ịgbaso ntuziaka ndị a maka ojiji na / ma ọ bụ site na njem na-enweghị ngwugwu mbụ. Ngbanwe ma ọ bụ gbanwee akụkụ ọ bụla nke ngwaahịa ahụ site n'aka ndị na-enwetaghị ikike, hapụ onye nrụpụta ahụ na ụgwọ ọ bụla karịrị iwu ndị ahịa nyere n'iwu.

Pro-Ject Audio Systems bụ ụghalaahịa edebanyere aha nke H. Lichtenegger.

Emepụtara ntuziaka a site na: Pro-Ject Audio Systems Copyright © 2018. Edebere ikike niile.
Ozi ahụ ziri ezi n'oge a na-aga ịpị. Onye nrụpụta ahụ nwere ikike ime mgbanwe na nkọwapụta teknụzụ na-enweghị ọkwa mbụ dị ka echere na ọ dị mkpa iji kwado usoro mmepe teknụzụ na-aga n'ihu.

© Pro-Ject Audio Systems · Pro-Ject Primary E / Pro-Ject 8.6E · Revision 2018.04.03

FAQ