LabCon (Onye nbibi)
Ndekọ + Ngwa nbipute
Akwụkwọ ntuziaka ọrụ
Ihe ndekọ LabCon + Ngwa nbipute
Akwụkwọ ntuziaka a dị nkenke bụ maka nrụtụ aka ngwa ngwa gbasara njikọ wiring na ịchọ paramita. Maka nkọwa ndị ọzọ gbasara ọrụ na ngwa; biko banye na www.ppiindia.net
PERATOR PAGE PARAMETERS
| Oke | Ntọala (Uru ndabara) |
| Họrọ Nhọrọ Bipụta>> | Ọ nweghị Bipụta (Ọhụrụ) Biputegharị (Ochie) Ibe ozi (Ndabere: Ọ dịghị) |
| Time Start Command >> Oge ime iwu >> |
Ee Mba (Ebube: Mba) |
| Ogologo oge (H:M) >> | 0.00 ruo 500.00 (HH:MM) (Ndabere: 0.10) |
| Ctrl Tọọ uru >> | Setpoint LO oke na oke Setpoint HI (Mkpebi 0.1°C maka RTD/DC Linear & 1°C maka Thermocouple) (Ebube: 25.0) |
| Ctrl Lo Deviation >> | Maka RTD & DC Linear: 0.2 ruo 99.9 Maka Thermocouple: 2 ruo 99 (Ndabere: 2.0) |
| Ctrl Hi Ngbanwe >> | Maka RTD & DC Linear: 0.2 ruo 99.9 Maka Thermocouple: 2 ruo 99 (Ndabere: 2.0) |
| Gbanwee paswọọdụ >> | 1 ruo 100 (Ndabere: 0) |
Nlekota> Ntinye ihe mmetụta
| Oke | Ntọala (Uru ndabara) |
| Ctrl Zero Offset >> | -50 ruo 50 (Mkpebi 0.1°C maka RTD/DC Linear & 1°C maka Thermocouple) (Ndabere: 0.0) |
Nlekota > Ndekọ
| Oke | Ntọala (Uru ndabara) |
| Ndekọ. Ogologo oge (nkeji) >> |
0 ruo 250 nkeji (Ndabere: 5 nkeji) |
| Oti mkpu Gbanwee ndekọ >> |
Kwado Gbanyụọ (Ndabere: Kwado) |
| Del Bipụta ndekọ >> |
Ee Mba (Ebube: Mba) |
| Del Gosipụta ndekọ >> |
Ee Mba (Ebube: Mba) |
| Oge RTC >> | 0 ruo 23 maka elekere 0 ruo 59 maka nkeji (ndabere: NA) |
| Ụbọchị RTC >> | 1 ruo 31 (Ebube: NA) |
| Ọnwa RTC >> | 1 ruo 12 (Ndabere: NA) |
| Afọ RTC >> | 2000 ruo 2099 (Ebube: NA) |
Nlekota > njikwa
| Oke | Ntọala (Uru ndabara) |
| Tụgharịa >> | Ee Mba (Ebube: Mba) |
| Setpoint LO Oke >> | Oke nkeji maka ụdị ntinye ahọpụtara ka ịtọọ oke HI (Mkpebi 0.1°C maka RTD / DC Linear & 1°C maka Thermocouple) (Ebube: 0.0) |
| Setpoint HI Oke >> | Tọọ oke LO ka oke oke maka ndị ahọpụtara Ụdị ntinye (Mkpebi 0.1°C maka RTD/DC Linear & 1°C maka Thermocouple) (Ndabere: 600.0) |
| Ntọala Compressor >> | 0 ruo 100 (Mkpebi 0.1°C maka RTD/DC Linear & 1°C maka Thermocouple) (Ndabere: 45.0) |
| Compressor Hyst >> | 0.1 ruo 99.9 (Ndabere: 2.0) |
| Okpomọkụ Ctrl Action >> |
PID na-adịghị (Ebube: PID) |
| Heat Hyst >> | 0.1 ruo 99.9 (Ndabere: 0.2) |
| Naanị njikwa ọkụ | Mpaghara njikwa ọkụ + dị jụụ: Single | Mpaghara Okpomọkụ + dị jụụ: Abụọ |
| Proportal Band >> 0.1 ruo 999.9 (Ndabere: 50.0) |
Proportal Band >> 0.1 ruo 999.9 (Ndabere: 50.0) |
Cz Prop Band >> Proportal Band maka Cool Pre-achị mpaghara 0.1 ruo 999.9 (Ndabere: 50.0) |
| Oge nchikota >> 0 ruo 3600 sk (Ihe ndabara: 100 sk) | Oge nchikota >> 0 ruo 3600 sk (Ihe ndabara: 100 sk) | Cz Integral Oge >> Oge mkpirisi maka mpaghara Cool tupu enwee ike 0 ruo 3600 sk (Ndabere: 100 sekọnd) |
| Oge mmepụta >> 0 ruo 600 sk (Ebube: 16 sk) |
Oge mmepụta >> 0 ruo 600 sk (Ebube: 16 sec) |
Oge Mwepụta Cz >> Oge ewepụtara maka mpaghara Cool tupu enwee ike 0 ruo 600 sk (Ebube: 16 sec) |
| Oge okirikiri >> 0.5 ruo 100.0 sk (Ebube: 10.0 sk) |
Oge okirikiri >> 0.5 ruo 100.0 sk (Ebube: 10.0 sk) |
Hz Prop Band >> Proportal Band maka Okpomọkụ Mpaghara na-achị 0.1 ruo 999.9 (Ndabere: 50.0) |
| Overshoot gbochie >> Kwado gbanyụọ (Ebube: gbanyụọ) |
Overshoot gbochie >> Kwado gbanyụọ (Ebube: gbanyụọ) |
Hz Integral Time >> Oge mkpirisi maka mpaghara ikpo ọkụ na-achị 0 ruo 3600 sk (Ndabere: 100 sekọnd) |
| Cutoff Factor >> 1.0 ruo 2.0 sk (Ebube: 1.2 sk) |
Cutoff Factor >> 1.0 ruo 2.0 sk (Ebube: 1.2 sk) |
Oge Mwepụta Hz >> Oge ewepụtara maka mpaghara ebe a na-achị ọkụ 0 ruo 600 sk (Ebube: 16 sk) |
| Oge okirikiri >> 0.5 ruo 100.0 sk (Ebube: 10.0 sk) |
||
| Overshoot gbochie >> Kwado gbanyụọ (Ebube: gbanyụọ) |
||
| Cutoff Factor >> 1.0 ruo 2.0 sk (Ebube: 1.2 sk) |
Onye nleba anya > Nhazi onye nbipute
| Oke | Ntọala (Uru ndabara) |
| Ahịrị kwa ibe >> | 25 ruo 100 (Ndabere: 65) |
| Top Margine >> | 1 ruo 5 (Ndabere: 2) |
| Ala ala >> | 1 ruo 5 (Ndabere: 2) |
| nkụnye eji isi mee & n'okpuru >> | Mba Na ibe mbụ ọ bụla (Ebube: Mba) |
| Kwado >> | Ee Mba (Ebube: Mba) |
Nlekota > Ihe omume bipụta
| Oke | Ntọala (Uru ndabara) |
| Gbanwee mkpu >> RTC gbanwee >> Gbanwee nkeji oge >> Power Up >> Mepee ụzọ >> Isi ọdịda >> Gbanwee ntọala ntọala >> |
Ee Mba (Ebube: Ee) |
SUPERVISORY > PASSWORD
| Oke | Ntọala (Uru ndabara) |
| Gbanwee Okwuntughe >> |
1000 ruo 1999 (Ndabere: 123) |
Nlekota > Wepu
| Oke | Ntọala (Uru ndabara) |
| Wepụ Ụdị Ntọala >> | Ee Mba (Ndabere:) Mba |
Ụlọ ọrụ > njikwa ihe mmetụta ntinye
| Oke | Ntọala (Uru ndabara) | ||||||||||||||||||
| Ụdị ntinye >> | Ntụtụaka Tebụl 1 (Ihe ndabara: RTD Pt100) | ||||||||||||||||||
| Signal LO >> |
|
||||||||||||||||||
| Signal HI >> |
|
||||||||||||||||||
| Mpaghara LO >> | -199.9 ka RANGE HI (Ebube: 0.0) |
||||||||||||||||||
| Oke HI >> | RANGE LO ruo 999.9 (Ebube: 100.0) |
Ụlọ ọrụ > MGBE MGBE
| Oke | Ntọala (Uru ndabara) |
| Hysteresis >> | 0.1 ruo 99.9 (Ebube: 0.2) |
| Mgbochi >> | Ee Mba (Ebube: Ee) |
Ụlọ ọrụ > Nhọrọ dị jụụ
| Oke | Ntọala (Uru ndabara) |
| Usoro njikwa >> | Okpomọkụ naanị dị jụụ naanị ọkụ + dị jụụ (Ndabere: Okpomọkụ + dị jụụ) |
| Usoro njikwa: naanị jụụ | |
| Oge igbu oge (sk) >> | 0 ruo 1000 sk (ndabere: 200 sekọnd) |
| Usoro njikwa: Okpomọkụ + dị jụụ | |
| Strategy Compressor >> | Ịga n'ihu. Gbanyụọ Ọdịnihu. NA SP BASED PV BASED (Ndabere: GAA n'ihu) |
| Ịga n'ihu. GBANYE | SP BASED | PV dabeere |
| Oge igbu oge (sk) >> 0 ruo 1000 sekọnd (Ebube: 200 sekọnd) |
Oke Tọọ uru >> 0 ruo 100 (Mkpebi 0.1°C maka RTD/DC Linear & 1°C maka Thermocouple) (Ebube: 45.0) |
Oge igbu oge (sk) >> 0 ruo 1000 sekọnd (Ebube: 200 sekọnd) |
| Mpaghara njikwa >> Naanị otu Abụọ (Ebube: Single) |
||
| Oge igbu oge (sk) >> 0 ruo 1000 sekọnd (Ndabere: 200 sekọnd) |
Ụlọ ọrụ> SOAK TIMER PARAMETERS
| Oke | Ntọala (Uru ndabara) |
| Kwado >> | Mba Ee (Ebube: Mba) |
| Malite Band >> | 0 ruo 999.9 (Ndabere: 0.5) |
| Usoro njide >> | Ọ dịghị nke elu ala abụọ (Ndabere: Ọ dịghị) |
| Jide Band >> | 0.1 ruo 999.9 (Ebube: 0.5) |
| Gbanyụọ ọkụ >> | Mba Ee (Ebube: Mba) |
| Dị jụụ >> | Mba Ee (Ebube: Mba) |
| Ike mgbake >> | Kwụsị Malitegharịa na-aga n'ihu (Ebube: Malitegharịa ekwentị) |
Ụlọ ọrụ > emeghere ụzọ
| Oke | Ntọala (Uru ndabara) |
| Kwado >> | Ee Mba (Ebube: Mba) |
| Gbanwee Logic >> | Mechie: Mepee ụzọ meghere: Mepee ụzọ (Ihe ndabara: Mechie: Mepee ụzọ) |
| Ọnụ ụzọ Alrm Dly (skeji) >> |
0 ruo 1000 sekọnd (Ndabere: 60 sekọnd) |
Ụlọ ọrụ > Isi ọdịda
| Oke | Ntọala (Uru ndabara) |
| Kwado >> | Ee Mba (Ebube: Mba) |
| Gbanwee Logic >> | Mechie: Isi ọdịda meghere: Isi ọdịda (Ndabere: nso: Mais Fail) |
Ụlọ ọrụ > PASSWORD
| Oke | Ntọala (Uru ndabara) |
| Gbanwee paswọọdụ >> | 2000 ruo 2999 (Ndabere: 321) |
Ụlọ ọrụ > Ụlọ mmepụta ihe adịghị mma
| Oke | Ntọala (Uru ndabara) |
| Tọọ Ka Ọbụ >> | Ee Mba (Ebube: Mba) |
Ụlọ ọrụ > Wepụ
| Oke | Ntọala (Uru ndabara) |
| Wepụ Ụdị Ntọala >> | Ee Mba (Ebube: Mba) |
| TABLE 1 | ||
| Ihe ọ pụtara | Oke (Nkeji ruo Max.) | Mkpebi |
| Ụdị J Thermocouple | 0 ruo +960 Celsius | Edobere 1°C |
| Ụdị K Thermocouple | -200 ruo +1376 Celsius | |
| Ụdị T Thermocouple | -200 ruo +385 Celsius | |
| Ụdị R Thermocouple | 0 ruo +1770 Celsius | |
| Ụdị S Thermocouple | 0 ruo +1765 Celsius | |
| Ụdị B Thermocouple | 0 ruo +1825 Celsius | |
| Ụdị N Thermocouple | 0 ruo +1300 Celsius | |
| Ndokwa | Edobere ya maka ụdị Thermocouple akọwapụtara nke ndị ahịa adịghị n'elu. A ga-akọwapụta ụdị ahụ dịka iwu nyere (nhọrọ na arịrịọ) Ụdị Thermocouple. | |
| 3-waya, RTD Pt100 | -199.9 ruo 600.0 Celsius | Edoziri 0.1°C |
| 0 ruo 20mA DC ugbu a | -199.9 ka 999.9 nkeji | Edoziri 0.1 nkeji |
| 4 ruo 20mA DC ugbu a | ||
| 0 ruo 5.0V DC voltage | ||
| 0 ruo 10.0V DC voltage | ||
| 1 ruo 5.0V DC voltage | ||
Njikọ eletrik
Ngosipụta njehie PV
| Ozi | Rordị rordị | Ihe kpatara ya |
 |
Ihe mmetụta Mepere | Sensọ (RTD Pt100) Agbajiri/mepee |
 |
N'elu oke | Okpomọkụ dị n'elu Max. Oke akọwapụtara |
 |
N'okpuru-oke | Okpomọkụ dị n'okpuru Min. Oke akọwapụtara |
Igodo panel ihu
| Akara | Igodo | Ọrụ |
 |
Pịgharịa | Pịa ka ịpịgharịa na ihuenyo ozi usoro dị iche iche n'ụdị ọrụ nkịtị. |
 |
Nkwenye mkpu | Pịa ka ịnakwere na mechie mmepụta mkpu (ọ bụrụ na ọ na-arụ ọrụ). |
 |
N'ala | Pịa ka ibelata uru oke. Ịpị otu ugboro na-ebelata uru site na otu ọnụ; Ịgbagide na-eme ka mgbanwe ahụ dịkwuo elu. |
 |
UP | Pịa ka iwelie uru oke. Ịpị otu ugboro na-abawanye uru site na otu ọnụ; Ịgbagide na-eme ka mgbanwe ahụ dịkwuo elu. |
 |
MELITE | Pịa ka ịbanye ma ọ bụ pụọ na ọnọdụ nhazi. |
 |
Banye | Pịa ka ịchekwaa uru paramita atọrọ wee pịgharịa gaa na oke na-esote. |
101, Diamond Industrial Estate, Navghar,
Ụzọ Vasai (E), Dist. Palghar - 401 210.
Ahịa : 8208199048 / 8208141446
Nkwado : 07498799226 / 08767395333
E: sales@ppiindia.net
support@ppiindia.net
Jenụwarị 2022
Akwụkwọ / akụrụngwa
 |
PPI LabCon Ndekọ + Ngwa nbipute [pdf] Akwụkwọ ntuziaka onye ọrụ Igwe nbipute LabCon na-edekọ, LabCon, Interface ngwa nbipute ndekọ, ngwa nbipute, ihu |
