Akwụkwọ ntuziaka onye ọrụ PeakTech 4060 MV DDS Ọrụ Generators

Unser Wear bụ ihe mgbochi….
Ndị nrụpụta ọrụ 4060 MV DDS
Akwụkwọ ntuziaka onye ọrụPeakTech 4055 MV / 4060 MV MVMV
Akwụkwọ ntuziaka ọrụ
Ndị nrụpụta ọrụ DDS

Ndị nrụpụta ọrụ 4060 MV DDS

Akpachara anya maka nchekwa

Ngwaahịa a na-akwado ihe ndị a chọrọ na ntuziaka ndị a nke European Union maka nkwenye CE: 2014/30/EU (ndakọrịta elektrọn), 2014/35/EU (obere voltaji).tage), 2011/65/EU (RoHS).
Iji hụ na arụ ọrụ nchekwa nke akụrụngwa ma kpochapụ ihe egwu nke mmerụ ahụ dị njọ n'ihi obere okirikiri (arcing), a ga-ahụrịrị nchekwa nchekwa ndị a.
Mmebi ndị na-esite na ọdịda nke idebe ihe nchekwa nchekwa bụ nke apụrụ na nkwupụta iwu ọ bụla.

• Tupu njikọ nke akụrụngwa na isi mmalite, lelee na mains dị voltage kwekọrọ na voltage ntọala nke akụrụngwa.
• Jikọọ plọg ndị bụ isi nke akụrụngwa naanị na ọdụ ụgbọ mmiri nwere njikọ ụwa.
• Agafela ogo ntinye anabatara kacha
• Dochie fiusi nwere ntụpọ naanị jiri fuse nke ọkwa izizi. Ejidela fiusi mkpirisi okirikiri ma ọ bụ fuse
• Kwupu ụzọ nnwale ma ọ bụ nyocha na sekit nha tupu ịgbanwee ụdị ma ọ bụ ọrụ.
• Lelee ụzọ nnwale na nyocha maka mkpuchi na-ezighi ezi ma ọ bụ waya efu tupu njikọ na akụrụngwa
• Ekpuchila oghere ventilashị nke kabinet iji hụ na ikuku nwere ike ịgbasa n'ime ya kpamkpam
• Etinyekwala ihe igwe n'ime akụrụngwa site na oghere ikuku
• Edokwala arịa jupụtara na mmiri na akụrụngwa (ihe egwu dị n'ime obere okirikiri ma ọ bụrụ na amaara akpa ahụ)
• Iji zere ujo ọkụ eletrik, arụla ngwaahịa a na mmiri mmiri ma ọ bụ damp ọnọdụ. Na-arụ ọrụ nha naanị na uwe akọrọ na akpụkpọ ụkwụ rọba, ya bụ n'ebe dịpụrụ adịpụ
• Emetụkwala ntụnye aka nke ụzọ nnwale ma ọ bụ nyocha
• Soro akara ịdọ aka ná ntị yana ozi ndị ọzọ na akụrụngwa
• Edoghachila ngwa ahụ ka ọ na-eduzi ìhè anyanwụ ma ọ bụ oke okpomọkụ, iru mmiri ma ọ bụ dampness
• Edonyela ngwa ahụ ka ọ maa jijiji ma ọ bụ ịma jijiji siri ike
• Ejila akụrụngwa rụọ ọrụ n'akụkụ ebe ndọta siri ike (moto, transformers wdg)
• Debe ígwè na-ekpo ọkụ ma ọ bụ égbè n'ebe akụrụngwa dị
• Kwe ka akụrụngwa kwụsie ike na ọnụ ụlọ tupu iwere nha dị mkpa maka nha kpọmkwem)
• Jiri mgbasa ozi hichaa kabinet kwa ogeamp akwa na etiti ncha. Ejila abrasives ma ọ bụ ihe mgbaze * Mita bụ naanị maka ime ụlọ.
• Ejila mita ahụ rụọ ọrụ tupu emechie kabinet ma mebie ya n'enweghị nsogbu ebe ọnụ nwere ike ibu voltage.
• Echekwala mita ahụ n'ebe ihe mgbawa na-ere ọkụ
• Agbanwela akụrụngwa n'ụzọ ọ bụla
• Imepe akụrụngwa na ọrụ- na ịrụzi ọrụ ga-emerịrị naanị ndị ọrụ ruru eru
• Ekwesịrị ịhazi ngwa ahụ ka plọg ọkụ wee wepụ ya na oghere n'ụzọ dị mfe.
• Ngwa eji atụ ihe abụghị nke aka ụmụaka-

Na-ehicha kabinet:
Tupu ihicha kabinet, wepụ plọg ọkụ na oghere ọkụ. Jiri mgbasa ozi naanị hichaaamp, akwa dị nro na ihe nhicha ụlọ dị nro dị n'ahịa. Gbaa mbọ hụ na ọ dịghị mmiri na-abanye n'ime akụrụngwa iji gbochie mkpụmkpụ na imebi akụrụngwa.

Mmalite nke PeakTech® DDS Ndị na-emepụta ọrụ

Site na Direct Digital Synthesis Technique (DDS), PeakTech® DDS na-emepụta ihe na-arụ ọrụ bụ nke nrịbama arụmọrụ dị elu yana ọtụtụ njirimara ọrụ dị mkpa maka ịmecha ngwa ngwa. Ihe dị mfe ma doo anya n'ihu panel na ihe ngosi ngosi nke ọnụ ọgụgụ na ìhè ọkụ dị mma maka ndị ọrụ iji rụọ ọrụ na ịhụ. Ọzọkwa, ogologo ọrụ nhọrọ na-eme ka njirimara usoro ahụ dịkwuo mma.
2.1. Kwadebe iji
2.1.1. Ka ịlele ngwa na ngwa
Lelee ma akụrụngwa na ngwa ahụ ezuola ma agbajighị. Ọ bụrụ na ngwugwu mebiri emebi nke ukwuu, biko debe ya ruo mgbe ngwa ahụ gafere ule arụmọrụ.
2.1.2. Tinye ma gbanye generator ọrụ 
Iji kwe nkwa ọrụ nchekwa nke ngwá ọrụ ahụ, a ga-enweta ọnọdụ ndị a.

Voltage:	AC 100-240V
Ugboro:	45 - 65 Hz
Ike:	<20VA
Okpomọkụ:	0 ~ 40 Celsius C
iru mmiri:	<80%

Ịdọ aka ná ntị!
Iji hụ na nchekwa nke onye na-arụ ọrụ, a ga-ejiri oghere oghere atọ nwere waya ala dị nchebe ga-eji.
2.2. Nkọwa nke Ogwe ihu na azụ azụ
2.2.1. Ogwe ihu:

1. Ike mgba ọkụ 2. igodo ọrụ 3. Mmepụta waveform 4. Mmekọrịta mmepụta

5. Ntụzi aka 6. Igodo ọnụọgụgụ 7. Ngosipụta ihuenyo

2.2.2. Ogwe azụ:

8. Ngwa USB 9. Ike Ampmmeputa ihe 10. Ike Ampntinye lifier

11. Ntinye ntinye 12. Ike oghere AC

2.3. Nkọwa ihuenyo
Ihuenyo ngosi gosipụtara otu ọnụọgụ abụọ, otu dị n'aka ekpe nwere ọnụọgụ 6 na-egosi ugboro ole, oge, attenuation, okirikiri ọrụ na ihe ndị ọzọ nke akara. Ọnụọgụ anọ dị na ihe ngosi aka nri amplitude offset na ndị ọzọ nke mgbaàmà. Enwekwara ọkụ na-egosi mkpụrụedemede n'ihuenyo ngosi, iji gosi akara ngosi nke dị ugbu a, nhọrọ oke yana nkeji nkeji.
2.4. Okwu mmeghe nke ahụigodo
Enwere igodo 28 n'ihu panel (lee foto n'ihu), ọrụ nke otu n'otu n'otu bụ:

• 【0】 【1】 【2】 【3】 【4】【5】【6】【7】【8】【9 】Igodo: igodo ntinye ọnụọgụ ọnụọgụgụ.
• 【.】 igodo: igodo ntinye ihe.
• igodo 【-】: Igodo ntinye mwepu, pịa igodo a ka itinye mwepu n'okpuru nhọrọ “offset”. Pịa igodo a ka ị mee ma ọ bụ gbanyụọ ụda igodo ahụ gburugburu n'okpuru nhọrọ ndị ọzọ.
• 【 ＜】 igodo: Bugharịa cursor aka ekpe; hichapụ ntinye mgbe ị na-etinye ọnụọgụ.
• 【】】 igodo: Bugharịa cursor nri.
• 【Freq】【Oge】 igodo: họrọ ugboro na oge okirikiri, gbanyụọ usoro mmezi mgbe ị na-emezi.
• 【Ampl】【Atten】 igodo: họrọ amplitude na attenuation okirikiri.
• 【Offset】 igodo: họrọ offset.
• 【FM】 【AM】【PM】【PWM】 【FSK】【Sweep】【Burst】key: otu n'otu họrọ wee pụọ FM, AM, PM, PWM, FSK, ugboro ugboro na-azakwa ọrụ.
• Igodo 【Trigg】: họrọ akpalite mpụga n'okpuru ịsagharị ugboro ole, mgbanwe FSK na ọrụ mgbawa.
• 【Mpụta】 igodo: meghee ma mechie mgbaama mmepụta okirikiri.
• 【Shift】 igodo: họrọ igodo shift, laghachi azụ na ọrụ ahụigodo n'okpuru steeti njikwa anya.
• 【Sine】【Square】【Ramp】 igodo: igodo mgbanwe, họrọ otu sinewave, square na ramp atọ nkịtị waveform.
• 【Arb】 igodo: igodo mgbanwe, họrọ ụdị ebili mmiri iri na isii nwere nọmba usoro ebili mmiri.
• 【Ọrụ】 igodo: igodo mgbanwe, họrọ okirikiri ọrụ square na symmetry nke ramp.
• 【Cal】 igodo: igodo shift, họrọ ọrụ mmezi oke.
• Igodo nkeji: Igodo isii nwere mkpụrụedemede otu n'elu ha na ala nke akụrụngwa abụghị igodo mgbanwe, kama igodo arụ ọrụ abụọ, pịa igodo ndị a ozugbo iji rụọ ọrụ ndị edobere n'onwe ha; mgbe ị na-eji igodo ọnụọgụ na-abanye mkpụrụ edemede, pịa igodo isii ndị a ka ịhọrọ nkeji nke ntinye wee kwụsị ntinye mkpụrụ edemede n'otu oge.
• Igodo 【Menu】: igodo maka menu, họrọ nhọrọ dị iche iche okirikiri n'okpuru ọrụ dị iche iche, lee ndepụta n'okpuru:

Ndepụta nhọrọ nke menu

NchNhr	Nhọrọ
Ụda	Usoro na ụdị nke waveform
Ntugharị ugboro ugboro	Malite ugboro ugboro, ngwụcha ngwụcha, oge mkpochapụ, ọnọdụ nzacha
fesa	Oge, ọnụọgụ pulse, mmalite nkeji
FM	Ugboro ngbanwe, ngbanwe ugboro ugboro, ụdị ịgbagharị agbagharị
AM	Ugboro mgbanwe, mgbanwe ampomimi litude, modul ebili mmiri
PM	Ugboro mgbanwe mgbanwe, ngbanwe nke oge, ụdị mgbanwe mgbanwe
PWM	Ugboro ngbanwe, omimi obosara mgbanwe, ụdị ịgbagharị agbagharị
FSK	Ọnụego hop, ugboro hop
nhazi nhazi	Uru nhazigharị: efu, nkwụsị, amplitude, ugboro ole, amplitude flatness

2.5. Basic ọrụ
Nkọwa na-esonụ ga-akọwa ọrụ bụ isi iji gboo mkpa ndị ọrụ na-emebu. Onye ọrụ ọ bụla onye nwere ajụjụ kwesịrị ịgụ ọdịnaya kwekọrọ na isi nke 3 nke nkuzi a.
2.5.1 Otu ugboro ọrụ: 
Nke bụ ndabara mgbe booting na mpụta otu ugboro mgbaama.
Ntọala ugboro ugboro:
Tọọ uru ugboro ugboro na 3.5 kHz 【Freq】【3】 【.】【5】【kHz】.
Ndozi ugboro ugboro:
Pịa igodo 【 ＜】 ma ọ bụ【】 ka ibugharịa cursor, gbanwee knob na-agbanwe aka ekpe ma ọ bụ aka nri iji belata ma ọ bụ welie ọnụọgụ na cursor, na-agbazinye ma ọ bụ buru na nkeji mbụ na-aga n'ihu. Bugharịa cursor n'aka ekpe maka ngbanwe na-enweghị isi, na aka nri maka ịhazigharị nke ọma. Igwe ngbanwe ahụ dịkwa maka ịhazigharị ọnụọgụ nke nhọrọ ndị ọzọ, nke agaghị akọwa ya ọzọ.
Ntọala oge:
Tọọ oge ka ọ bụrụ 2.5ms 【Oge】【2】【.】 【5】 【ms】.
Ampntọala litude:
Tọọ nke ampọkụ dị ka 1.5Vpp 【Ampl】 【1】【.】 【5】【Vpp】.
Ntọala attenuation:
Tọọ attenuation ka 0dB (Attenuation akpaaka bụ ndabara mgbe booting) 【Atten】【0】【dB】 .
Ntọala kwụsịrị:
Tọọ nkwụghachi DC ka -1Vdc 【Offset】 【-】【1】【Vdc】.
Nhọrọ ụdị ebili mmiri nkịtị:
Họrọ square (sine bụ ndabara ka emechara booting) 【Shift 】 【Square】.
Ntọala okirikiri ọrụ:
Tọọ okirikiri ọrụ nke square ka 20% 【Shift 】【 【Ọrụ】【2】【0】【%】.
Nhọrọ ụdị ebili mmiri ndị ọzọ:
Họrọ exponent waveform (usoro nọmba 16, lee ndepụta nọmba usoro nke ụdị ebili mmiri iri na isii) 【Shift 】【【Arb】【16】【1】 【N】
Ọdịnaya dị n'okpuru na-egosi ọrụ ihichapụ ugboro ole. Iji lelee na tụọ, ndị ọrụ nwere ike ịtọ akara ngosi otu ugboro dị ka sine, yana amplitude nke 1Vpp, na nkwụsị nke 0V DC.
2.5.2 Ọrụ ihicha ugboro ugboro:
Pịa igodo 【Sweep】 iji wepụta mgbama na-ehichapụ ugboro ole.
Malite ntọala ugboro ugboro:
Tọọ ugboro mmalite na 5 kHz
Pịa igodo 【Menu】 ka ọkụ leta "Malite", pịa 【5】【kHz】.
Ntọala nkwụsịtụ:
Tọọ ugboro ngwụcha na 2 kHz
Pịa igodo 【Menu】 ka ọkụ leta “Kwụsị”, pịa 【2】【kHz】.
Nhazi oge mkpochapụ:
Tọọ oge ịsa ahụ na 5 s
Pịa igodo 【Menu】 ka ọkụ leta "Oge", pịa 【5】【s】.
Ntọala ọnọdụ ịsa ahụ:
Tọọ ụdị nchacha logarithm
Pịa igodo 【Menu】, pịa 【1】 【N】.
Ntọala mkpochapụ kpalite:
Pịa igodo 【Trig】, ịsa ahụ ga-akwụsị mgbe ị na-eru na njedebe, oge ọ bụla ị pịa igodo 【Trig】, generator na-akpalite zaa otu ugboro. Pịa igodo 【Sweep】 ọzọ ka ịmaliteghachi na ihicha na-aga n'ihu.
2.5.3. Ọrụ mgbawa:
Tọọ ugboro na-aga n'ihu dị ka 1kHz.
【Burst】 igodo, mgbama mgbawa mmepụta.
Ntọala oge ugboro ugboro:
Tọọ oge ugboro ugboro ka 5ms
【Menu】 igodo, ọkụ “Oge” agwa, pịa 【5】【ms 】.
Ntọala ọnụọgụ mkpụrụ akụ:
Tọọ ọnụ ọgụgụ pulse dị ka 1
【Menu】 igodo, ọkụ “Ncyc” agwa, pịa 【1】【N】.
Ntọala ngalaba mmalite:
Tọọ mmalite mmalite ka 180°.
【NchNhr】 igodo, ọkụ “Oge” agwa, pịa 【1】【8】【0】【°】.
Ntọala mgbawa na-akpalite:
Pịa igodo 【Trig】 ka ịkwụsị mpụta mpụta, mgbe ọ bụla ị pịa igodo 【Trig】, generator na-akpalite mgbawa otu ugboro. Pịa igodo 【Burst】 ka ịmaliteghachi mgbawa na-aga n'ihu.
2.5.4. Ọrụ mgbanwe ugboro ugboro:
Tọọ ugboro na-aga n'ihu ka 20kHz
【FM】 igodo, mgbama modulation ugboro mmepụta.
Ntọala ugboro mgbanwe: Tọọ ugboro mgbanwe ka 10Hz
Pịa 【NchNhr】 igodo ka ọkụ agwa “Mod_f”, pịa 【1】【0】 【Hz】.
Ntọala ngbanwe ugboro ugboro: tọọ ndahie ugboro dị ka 2kHz.
Pịa igodo 【NchNhr】 ka ọkụ agwa “Devia”, pịa 【1】【kHz】.
Nhazi ụdị ịgbagharị agbagharị: tọọ ụdị ebili mmiri modul dị ka akụkụ atọ
Pịa 【NchNhr】 igodo iji mee ka agwa “ọdịdị” ọkụ, pịa 【2】 【N】.
2.5.5. Ampọrụ modulation litude:
【AM】 igodo, mmepụta ampmgbaàmà modulation litude.
Ntọala ugboro mgbanwe mgbanwe:
Tọọ ugboro mgbanwe ka 1kHz.
Pịa igodo 【NchNhr】 ka ọkụ agwa “Mod_f”, pịa 【1】【kHz】.
Mgbanwe ampntọala omimi litude:
Tọọ modulation ampịdị omimi litude dị ka 50 .
Pịa igodo 【Menu】 ka ọkụ agwa “Omimi” wee pịa 【5】【0】【%】.
Ntọlite ​​ụdị ebili mmiri:
Tọọ ụdị mgbanwe mgbanwe ka ọ bụrụ sine.
Pịa igodo 【NchNhr】 iji mee ka agwa “ọdịdị” ọkụ wee pịa 【0】 【N】.
2.5.6. Ọrụ mgbanwe usoro:
【PM】 igodo, mgbama mgbanwe usoro mmepụta.
Ntọala ugboro mgbanwe: Tọọ ugboro mgbanwe ka 10kHz.
Pịa igodo 【Menu】 ka ọkụ agwa “Mod_f” wee pịa 【1】【0】【kHz】.
Ntọala ngbanwe usoro: Tọọ ngbanwe nke oge dịka 180°.
Pịa 【NchNhr】 igodo iji mee ka agwa “phase” ọkụ wee pịa 【1】【8】【0】【°】.
Nhazi ụdị ịgbagharị agbagharị: tọọ ụdị ebili mmiri modul dị ka square.
Pịa igodo 【NchNhr】 iji mee ka agwa “ọdịdị” ọkụ wee pịa 【1】 【N】.
2.5.7. Ọrụ ngbanwe obosara usu (PWM):
igodo 【PWM】, mgbama ngbanwe obosara mpụta mpụta.
Ntọala ugboro mgbanwe: Tọọ ugboro mgbanwe ka 1Hz
Pịa igodo 【Menu】 ka ọkụ agwa “Mod_f” wee pịa 【1】【Hz】.
Ntọala ngbanwe obosara nke Pulse: Tọọ ngbanwe obosara usu dị ka 80 .
Pịa igodo 【Menu】 ka ọkụ agwa “Devia” wee pịa 【8】【0】【%】.
Nhazi ụdị ịgbagharị agbagharị: tọọ ụdị ebili mmiri modul dị ka sine.
Pịa igodo 【Menu】 iji mee ka agwa “ọdịdị” ọkụ wee pịa 【0】 【N】.
2.5.8. Ọrụ igodo mgbanwe ugboro ugboro (FSK):
Tọọ ụdị ebili mmiri ka ọ bụrụ sine.
【FSK】 igodo, mgbama FSK mmepụta.
Ntọala ọnụego hop: tọọ ọnụego hop ka 1kHz.
Pịa igodo 【Menu】 ka agwa “Rate” ọkụ wee pịa 【1】 【kHz】.
Ntọala ugboro hop: tọọ ugboro hop ka 2kHz.
Pịa igodo 【Menu】 ka ọkụ agwa “Hop” wee pịa 【2】 【kHz】.

Nchịkọta ụkpụrụ

3.1. Ụkpụrụ ụkpụrụ

3.2. Ụkpụrụ ọrụ nke DDS

• Iji mepụta voltage mgbama, isi iyi mgbama analọgụ ọdịnala na-anabata ihe elektrọn dị ka oscillator n'ụzọ dị iche iche. Ya mere ma eziokwu ugboro ugboro na nkwụsi ike adịghị elu nke ọma. E wezụga nke ahụ, ọ bụ nke adịghị mmatages nke usoro mgbagwoju anya, mkpebi dị ala na ntọala ugboro na-adịghị mma na ịghọta njikwa kọmputa. Usoro Direct Digital Synthesize (DDS) bụ usoro ọhụrụ na-emepe emepe nke na-emepụta akara na-enweghị ihe ọ bụla oscillator, nke a na-esi na-emepụta usoro iyi data site na iji usoro nhazi dijitalụ wee nweta akara ngosi analog emebegoro site na ntụgharị dijitalụ-analogue.
• Iji mepụta mgbama sine, maka example, ọrụ nke y=sinx kwesịrị ibu ụzọ kọọ ọnụọgụgụ dijitalụ, wee were x dị ka adreesị yana y dị ka data ọnụọgụ iji chekwaa ha n'ime ihe ncheta waveform. DDS na-eji usoro ịgbakwunye usoro iji jikwaa adreesị nke ihe ncheta waveform. Tinye mgbakwunye usoro na nsonaazụ ugbu a nke mkpokọta mkpokọta na s nke ọ bụlaampling oge elekere ka ịgbanwe mmepụta ugboro uru site mgbanwe na-adọ increment. Dịka adreesị sitere na onye na-achịkọta usoro, wepụ data a na-agụpụta n'ihe ncheta ebili mmiri wee gbanwee ya ka ọ bụrụ analog vol.tage via digit-analog Ntụgharị na ọrụ amponye ndu. Ebe data waveform na-akwụsị sampling, steepụ sine waveform na-esi na DDS generator pụta. Ekwesịrị iji nzacha lowpass mee ka ebili mmiri dị elu agụnyere na ya wee wepụta ebili mmiri na-aga n'ihu. Na elu ziri ezi ntụaka voltage isi iyi na digitanalog Ntụgharị, mmepụta waveform bụ ma ọ bụrụ na elu amplitude ziri ezi na nkwụsi ike.
• Amponye na-ahụ maka litude bụ ihe ntụgharị dijitalụ-analogue. Dabere na amplitude uru atọrọ site n'aka onye ọrụ, ọ na-ewepụta analogue voltage wee mụbaa site na mgbama mmepụta ka ọ na-ekwe nkwa amplitude nke mgbama mmepụta ka ọ bụrụ uru atọrọ. Ihe njikwa akwụ ụgwọ bụ ihe ngbanwe ọnụọgụ dijitalụ. Dabere n'ụgwọ mgbaghara site n'aka onye ọrụ, ọ na-ewepụta analọgụ voltage wee gbakwunye ya na mgbama mmepụta ka ọ kwenye na nkwụghachi nke mgbaama mmepụta ga-abụ uru atọrọ.

3.3. Ụkpụrụ ọrụ nke njikwa ọrụ

• Micro-controller na-ejikwa ahụigodo ma gosipụta akụkụ ya na sekit interface, mgbe ịpịrị igodo, onye na-ahụ maka micro na-amata koodu igodo pịa ma mee mmemme iwu kwekọrọ na igodo a. Sekit ngosi ga-arụ ọrụ iji gosipụta ọnọdụ ọrụ akụrụngwa yana oke nke ọ bụla.
• Gbanwee knob na-agbanwe agbanwe na panel iji gbanwee ọnụọgụ dị na ọnọdụ cursor, na-emepụta ihe na-akpali akpali na ntụgharị 15 ọ bụla. Microprocessor nwere ike ikpebi ntụgharị aka ekpe ma ọ bụ aka nri, ọ bụrụ na ekpe ya, a ga-ewepụ nọmba nọ n'ọnọdụ cursor site na 1; ọ bụrụ na ọ ziri ezi, a ga-agbakwunye nọmba nọ n'ọnọdụ cursor site na 1 na-ebu ma ọ bụ gbaziri.

Ijikwa ntuzi aka

4.1. Iwu ọrụ izugbe
4.1.1. Ntinye data:

• Họrọ nhọrọ na ntinye na igodo ọnụọgụ ọnụọgụ nke nhọrọ a. Igodo ọnụọgụ iri bụ nke ọrụ ntinye data site n'aka ekpe gaa n'aka nri otu otu.
  A na-anabata akara na data a, mana naanị nke mbụ dị irè mgbe etinyere ihe karịrị otu isi. N'okpuru ọrụ "offset", mwepu nwere ike ịbụ ntinye. Ntinye ndenye ọnụọgụ ọnụọgụ na mpaghara ngosi nke na-adịghị arụ ọrụ ma enwere ike ihichapụ site na ịpị 【＜】, ma ọ bụ họrọ nhọrọ a ọzọ, ka itinye nke ziri ezi ma ọ bụrụ na ọ bụ ntinye na-ezighi ezi, mana ihe ndị a ga-emerịrị tupu ịpịa igodo otu. . Kwụsị ntinye ọnụọgụ ma mee ka ha dị irè site na ịpị igodo otu.
• Maka ntinye ọ bụla site na ịpị igodo isi na nkeji, generator ga-egosipụta ntinye a n'ụdị nke ya. Dị ka, generator na-egosiputa 1.50000 kHz maka ntinye nke 1.5 kHz na 1500 Hz.

4.1.2. Jiri Knob na-agbanwe agbanwe:

• Na arụrụ ọrụ n'ezie, ndị ọrụ nwere ike iji mkpisigharị mmezi ka ọ na-aga n'ihu na-edozi mgbaama. Pịa 【＜】 ma ọ bụ【】 ka ibugharịa cursor aka ekpe ma ọ bụ aka nri. Gbanwee mkpịsị ugodi n'ihu n'ihu nri iji gbakwunye ọnụọgụ na ọnọdụ cursor site na 1, ọ nwere ike ime nke mbụ; tụgharịa mkpịsị ugodi ngbanwe aka ekpe ka iwepụ mkpụrụọnụọgụgụ dị na ọnọdụ cursor site na 1, ọ nwere ike gbaziri nkeji na nke mbụ. Ọnụọgụ nke agbaziri site na ngbanwe na-arụ ọrụ ozugbo na enweghị mkpa ịpị igodo otu. Bugharịa cursor gaa n'aka ekpe iji mee mgbanwe n'ụzọ siri ike site na nkuku, na gaa n'aka nri iji mee mgbanwe dị mma.

4.1.3. Nhọrọ ntinye pụtara:

• Maka data a ma ama, ọ kachasị mma iji igodo ọnụọgụ dị ka enwere ike nweta ya n'ụzọ dị mfe na-enweghị ịmepụta data na-agafe agafe n'agbanyeghị nnukwu mgbanwe nke data ahụ, nke dị oke mkpa. Maka mgbanwe nke data etinyere ma ọ bụ maka itinye data usoro, ọ ga-adaba adaba iji knob. Mana maka usoro data nhata nhata, iji igodo nzọụkwụ ga-adaba adaba karịa. Yabụ onye ọrụ kwesịrị ịhọrọ nke ọma dịka ngwa dị iche iche siri dị.

4.2. Otu ugboro ọrụ

• Mgbe booting, generator na-abanye n'ọrụ na-aga n'ihu na-akpaghị aka, ọrụ na-aga n'ihu pụtara na mgbama mmepụta ahụ kwụsiri ike ma na-aga n'ihu, nke ụdị waveform, ugboro ole, amplitude na nkeji agaghị agbanwe yana mgbanwe oge.

4.2.1. Ntọala ugboro ugboro:

• Pịa igodo【Freq】, ọkụ nke ga-adị, iji gosipụta uru ugboro ole ugbu a. Uru ntinye ntinye nwere igodo ọnụọgụ ma ọ bụ nhazi nhazi yana akara nke ugboro a ga-esi na ọdụ ụgbọ mmiri pụta.

4.2.2. Ntọala oge:

• Pịa igodo Freq】, ọkụ nke "Oge" ga-agbanye, iji gosipụta uru oge dị ugbu a, uru oge ntinye na igodo ọnụọgụ ma ọ bụ nhazi nhazi. A na-ahazi ugboro ugboro n'ime ime ihe na-emepụta ọkụ, ma gbanwee ka ọ bụrụ oge mgbe ị na-etinye na egosipụta. Oke site na obere mkpebi dị ala, maka ogologo oge, igwe na-ere ọkụ nwere ike iwepụta ụfọdụ ihe ugboro na ogologo oge. Ọ bụ ezie na ntọala na oge ngosipụta ziri ezi, oge mgbama mmepụta nwere ike ịdị iche na ha, nke kwesịrị ịtụle n'oge arụ ọrụ.

4.2.3. Ampntọala litude:

• Pịa【Ampl】 igodo, ọkụ nke ga-enwu, iji gosi ugbu a ampuru litude, ntinye ampuru litude nwere igodo ọnụọgụ ma ọ bụ nhazi nhazi yana akara nke a amplitude ga-esi n'ọdụ ụgbọ mmiri mmepụta pụta.
• Mmekọrịta dị n'etiti kacha amplitude na dechapụ uru kwesịrị n'okpuru usoro, ma ọ bụrụ na ntọala nke amplitude karịrị nkọwapụta, generator ga-agbanwe ya ruo mgbe ọ bụ n'ime oke ikike kacha ampuru litude.

Vpp≤2× (10- | akwụ ụgwọ|)

4.2.4. Ụdị nke ampuru litude:
Enwere ụdị abụọ maka ampNtinye na ngosipụta litude: ụdị kacha elu na ụdị RMS.

• Pịa 【Vpp】 ma ọ bụ 【mVpp】 ka itinye ampuru kacha elu litude mgbe itinyere ọnụọgụgụ.
• Pịa 【Vrms】 ma ọ bụ 【mVrms】 ka itinye ampuru RMS litude. Uru RMS na-adabara naanị maka sinewave, wave square na ramp ife, na ụdị ebili mmiri ndị ọzọ nwere ike igosi naanị site na ampuru kacha elu litude.

4.2.5. Ampntọala attenuation litude

• Pịa 【Ampl】 igodo na-enwu “Atten” wee gosi uru mbelata dị ugbu a. Amplitude attenuation bụ akpaaka dị ka ndabara nke booting wee gosipụta “Auto” onye na-emepụta ihe ga-ahọrọ oke nkwụghachi azụ na-akpaghị aka dịka ampuru ntọala litude, dị elu ampMkpebi litude, oke mgbama-mkpọtụ dị elu na obere mgbagha ebili mmiri nwere ike ime n'otu oge n'agbanyeghị agbanyeghị ampịdị ukwuu nke mgbama. Mgbama mmepụta na-eme ka hop nwa oge mgbe attenuation gbanwere, nke na-adịghị anabata na ụfọdụ ọrụ, ma generator nwere edozi attenuation ọrụ iji zere ọnọdụ a. Ntinye ntinye nbibi nke 0dB, 20dB, 40dB na 60dB jiri igodo ọnụọgụ, tinye 80dB ka ịhọrọ attenuation akpaaka. Ndị ọrụ nwere ike ijikwa mkpọ na-agbanwe agbanwe, attenuation na-agbanwe na nke ọzọ maka nzọụkwụ ọ bụla nke ntụgharị. Mgbe ahọpụtara ọnọdụ attenuation edoziri, a na-edozi attenuation mgbe mgbama ampmgbanwe litude, na mgbama mmepụta nwere ike ịgbanwe na-aga n'ihu n'ime dum ampoke litude. Mana mgbagha dị elu nke ụdị ebili mmiri na oke mgbama na-adịghị mma nwere ike ịpụta mgbe attenuation bụ 0dB na ampọnọdụ nke mgbaàmà dị obere.

4.2.6. Ibu mmepụta:

• The ntọala uru nke ampA na-ahazi litude mgbe njedebe mmepụta mepere emepe. Ezigbo voltage nke mmepụta ibu bụ ntọala uru nke amplitude mụbara site na oke ọrụ nke impedance ibu (gụnyere inductance na capacitance) na impedance mmepụta. Nkwụsị mmepụta ihe dị ka 50. Mgbe nkwụsị nke ibu dị elu, oke ọrụ na-abịaru nso na 1. Vol.tage ọnwụ nke mmepụta impedance nwere ike na-eleghara anya. Ezigbo voltage-abịaru nso na ntọala uru nke amplitude. Ma mgbe impedance ibu dị ala, voltage ọnwụ nke mmepụta impedance enweghị ike ileghara. Ọ ga-akwụ ụgwọ ọzọ anya na n'ezie voltage adịghị dakọtara na ntọala uru nke amplitude.
• Site na nguzogide mmepụta 50Ω, obere mkpirisi obere oge nke ọdụ ụgbọ mmiri na-emepụta ihe adịghị emebi ihe na-emepụta ihe, mana ndị ọrụ kwesịrị ịgbalị izere ogologo oge mkpụmkpụ-circuit n'okpuru nnukwu voltaji.tage mmepụta dị ka ihe ize ndụ nke ime mmebi na generator. Igwe ọkụ na-arụ ọrụ nke na-abụghị voltage nchedo, nke generator na-emechi mmepụta na-akpaghị aka, mee ka mkpu na mmepụta na-egosi ọkụ mgbe ejikọrọ a elu voltage (ihe na-erughị 30 V) n'ọdụ ụgbọ mmiri mmepụta. Mepee mmepụta site na ịpị igodo 【Mpụta】 naanị ka emechara mmejọ ahụ.

4.2.7. Mbido-ntọala:
N'ọnọdụ ụfọdụ, ụfọdụ akụrụngwa DC kwesịrị ịdị na mgbama AC ka ewepụtara ya ka ewepụta nkwụghachi DC.
Pịa igodo 【Offset】, ọkụ nke ga-enwu yana uru nkwụghachi ugbu a ga-egosipụta. Tinye uru nkwụghachi site na igodo ọnụọgụ ma ọ bụ na-edozi mkpịsị aka maka mgbama mmepụta iji mepụta nkwụghachi DC a na mmepụta. Mmekọrịta dị n'etiti kacha DC akwụ ụgwọ na ampuru litude kwesịrị ịdị n'okpuru usoro, ma ọ bụrụ na ntọala nke nkwụghachi gafere, generator ga-agbanwe ya ruo mgbe ọ bụ n'ime oke nke oke nkwụghachi ụgwọ.
【offset】≤10-Vpp÷2
A ghaghị ịṅa ntị na nchịkọta nke ọkara nke mmepụta ampỌkụ nke mgbama na uru nkwụghachi zuru oke kwesịrị ịbụ ihe na-erughị 10V iji kwe nkwa ọnụ ahịa mgbama na-erughị ± 10V. Ma ọ bụghị ya, na ampA ga-ebute mgbagha nwere oke litude. E wezụga, mgbe attenuation nke ọwa A na-ahọrọ akpaaka, mmepụta offset ga-attenuate na attenuation nke. amplitude. Maka Vpp nke amplitude karịrị 2V, n'ezie mmepụta offset bụ atọrọ dechapụ uru. Maka Vpp nke amplitude karịrị 0.2V mana ihe na-erughị 2V, ezigbo mwepu nrụpụta bụ otu ụzọ n'ụzọ iri nke uru akwụrụ. Maka Vpp nke amplitude na-erughị 0.2V, ezigbo mwepu mwepu bụ otu pasent nke uru akwụrụ agbarụ.
Ọ ga-adaba adaba na iji igodo ọnụọgụ karịa akara mgbe ị na-edozi ngbanwe DC maka mgbama mmepụta. N'izugbe, ma DC nkwụghachi dị mma ma ọ bụ adịghị mma, DC larịị ga-ebili ma ọ bụrụ na-atụgharị aka nri na-ada ma ọ bụrụ na-atụgharị aka ekpe. Ihe ịrịba ama nke dị mma na nke na-adịghị mma ga-agbanwe na-akpaghị aka mgbe ị na-agafe ebe efu.
4.2.8. Ihe mmepụta DC voltage:

• Ọ bụrụ na ampedobere attenuation litude ka ọ bụrụ 0 dB, uru nkwụghachi ụgwọ mpụtara hà nhata uru akwụrụ nke eburu n'uche ma nọọrọ onwe ya na nke amplitude.Set amplitude na 0V, enwere ike ịtọ uru akwụghachi azụ n'ụzọ akaghị aka n'ime oke ± 10V, generator bụ ugbu a DC vol.tage ike ọkọnọ na mmepụta kpọmkwem DC voltage mgbama.

4.2.9. Nhọrọ nke ụdị ebili mmiri nke ọwa A:

• Onye na-ere ọkụ nwere ike iwepụta ụdị ebili mmiri 16, pịa 【Shift 】 【Sine】, 【Shift 】 【Square】, 【Shift】 【Ramp】 igodo ozugbo iji họrọ ụdị atọ a na-efegharị efegharị, a ga-egosipụta agwa ụdị ebili mmiri kwekọrọ. Ndị ọrụ nwere ike họrọ ụdị ebili mmiri 16 niile nwere nọmba usoro ebili mmiri, 【Shift 】 【Arb】 igodo iji gosi nọmba usoro ebili mmiri dị ugbu a, ndị ọrụ nwekwara ike itinye akara usoro ebili mmiri na igodo ọnụọgụ ma ọ bụ gbanwee knob iji họrọ ụdị ebili mmiri kwekọrọ na usoro akọwapụtara. ọnụọgụgụ. Ewezuga ụdị ebili mmiri atọ a na-ahụkarị, njirimara ebili mmiri nke ụdị ebili mmiri ndị ọzọ bụ “Arb”. Edepụtara nọmba usoro ebili mmiri nke ụdị 16 dị ka n'okpuru:

Ndepụta aha na nọmba usoro nke ụdị ebili mmiri 16:

nọmba usoro	ụdị ifegharị
0	mmehie
1	square
2	ramp
3	pulse
4	neg-pulse
5	steepụ
6	mkpọtụ
7	ọkara sine
8	oke sine
9	exponant
10	logarithm
11	tangent
12	mmehie (x)/x
13	ọkara gburugburu
14	obi
15	ọma jijiji

4.2.10. Nhazi okirikiri ọrụ:
Mgbe nhọrọ nke ụdị waveform dị ugbu a bụ square ma ọ bụ ramp(gụnyere pos-square na pos-ramp), ndị ọrụ nwere ike pịa igodo 【Ọrụ】 iji gosipụta uru okirikiri ọrụ dị ugbu a, uru okirikiri ọrụ ntinye ya na igodo ọnụọgụ ma ọ bụ ngbanwe knob, mgbe ahụ nsonaazụ ga-abụ square ma ọ bụ r.amp nwere uru okirikiri ọrụ a kapịrị ọnụ. Nkọwa nke okirikiri ọrụ square bụ oke nke oge ọkwa dị elu nke otu square na oge nke square a. Echiche a na-emekarị maka okirikiri ọrụ square bụ 50 , a na-akpọkarị usoro ebili mmiri na okirikiri ọrụ ndị ọzọ pulse. Nkọwa nke ramp okirikiri ọrụ bụ oke nke ịrị elu oge nke otu ramp ruo oge nke a ramp. Ihe ramp A na-akpọkarị okirikiri ọrụ ramp symmetry, ramps nwere symmetry nke 0% ma ọ bụ 100% na-akpọkarị sawtooth wave, na ramp na symmetry nke 50% ka a na-akpọ triangle ife.
Mgbe ugboro nke square na-atụnyere elu, nhazi usoro ọrụ na-ejedebe site na njedebe oge, na mmekọrịta dịka usoro n'okpuru:
Oge okirikiri × Oge≥2× Edge oge
or
Oge okirikiri × Oge ≤ Oge （2× Edge oge)

4.3. Ntọala usoro mmepụta

• N'okpuru ọrụ na-aga n'ihu, pịa 【NchNhr】 iji gosipụta uru usoro mmepụta, uru ntinye ntinye nwere igodo ọnụọgụ ma ọ bụ mkpisigharị nhazi, enwere naanị ụkpụrụ usoro mmepụta abụọ, 0 na 1.
• Mgbe ị na-edozi usoro ahụ dị ka 0, usoro nke mgbaàmà sitere na 《OUTPUT 》ọdụ ụgbọ mmiri ma bụrụ otu ihe ahụ na akara ngosi si 《SYNC 》port ， mgbe ị na-etinye usoro ahụ dị ka 1, ha abụọ na-emegide.

4.4. Ọrụ mkpochapụ ugboro ugboro
Na ihicha ugboro ugboro, oge mmepụta na-agbanwe site na mmalite ugboro ugboro ruo n'ókè njedebe dịka oge ntọhapụ ntọala siri dị. Ndị ọrụ nwere ike ịsachapụ n'ime oke ugboro ole niile. N'oge usoro a, akụkụ nke mgbaàmà mmepụta na-aga n'ihu. Enwere ike ịsacha ụdị ebili mmiri 16 niile, n'ezie ọ baghị uru ikpochapụ DC ma ọ bụ mkpọtụ. Ntugharị ugboro ugboro linearity yiri nke ramp Mgbanwe ugboro ugboro, yana ọdịiche nke, ihicha ugboro ugboro anaghị eji modulation waveform, ma na-aga n'ihu na-emepụta usoro nke isi ihe dị iche iche dịka oge ụfọdụ siri dị. Pịa igodo 【Sweep】 na generator na-abanye n'ọrụ ihicha ugboro ugboro.

4.4.1 Mmalite na ngwụcha ugboro:

• Pịa igodo 【Menu】 ka mwue mkpụrụedemede “Malite” wee tọọ ebe mmalite ugboro.
• Pịa igodo 【Menu】 ka mwue mkpụrụedemede “Kwụsị” wee tọọ ebe ngwụcha.
• If the end frequency value is more than the start frequency value, the sweep is positive from lower frequency to higher frequency, increasing step by step from the start frequency to the end frequency and then return to the start frequency.
• If end frequency value is less than the start frequency value, the sweep is opposite from higher frequency to lower frequency, decreasing step by step from the start frequency to the end frequency and then return to the start frequency.

4.4.2 oge mkpochapụ:

• Pịa 【NchNhr】-igodo iji mee ka mkpụrụedemede “Oge” gbanye wee tọọ uru oge mkpochapụ.
• Oge nhichapụ pụtara oge ịsa ahụ site na mmalite ugboro ugboro ruo n'ọgwụgwụ ugboro.
• Oge nzacha nke ebe ọ bụla ugboro ugboro bụ otu, ya mere, ka oge na-ekpochapụ na-adịru ogologo oge, ka a na-ehichapụ ihe ugboro ole na ole, na-ebelata nzọụkwụ nke ugboro ugboro, na-adị mma nke ọma.
• Mkpirikpi nke oge ịsa ahụ bụ, a na-ekpochapụ ihe ugboro ole na ole, ka nzọụkwụ nke ugboro ugboro na-adịwanye, na-esiwanye ike.

4.4.3. Ụdị nzacha:

• Pịa 【NchNhr】-igodo ka ịtọọ ọnọdụ nzacha. Tọọ uru dị ka 0, agwa "linear" ga-enwu ọkụ, na ọnọdụ na-ekpochapụ ugbu a bụ linearity. Tọọ uru dị ka 1, agwa "log" ga-enwu, ka ịhọrọ ọnọdụ logarithm.
• N'okpuru ọnọdụ na-ekpochapụ linearity, a na-edozi usoro ugboro ole, mana usoro ugboro ugboro na-enwe mmetụta dị njọ mgbe niile mgbe ị na-ekpochapụ ọtụtụ ugboro.
• N'okwu ahụ, mkpebi ahụ dị elu mgbe ị na-ekpochapụ njedebe dị elu nke ugboro ole, ugboro ole na-agbanwe nwayọọ nwayọọ, na ịsa ahụ dị mma.
• Ma mkpebi ahụ dị ala mgbe ị na-ehichapụ obere njedebe nke ugboro ole, ugboro na-agbanwe ngwa ngwa, nsweeping na-esi ike.
• Ya mere, ịhịa aka n'ahịrị na-adabara naanị maka ịsa ya na nso nso a dị warara.
• N'okpuru ọnọdụ mkpochapụ logarithm, anaghị edozi uru nzọụkwụ ugboro ugboro mana ọ na-agbanwe dịka njikọ logarithm si dị.
• Mgbe ị na-ekpochapụ njedebe dị elu nke ugboro ugboro, uru nzọụkwụ ugboro ugboro na-atụnyere nnukwu; mgbe ị na-ekpochapụ njedebe dị ala nke ugboro ole, uru nzọụkwụ ugboro ole na-adị ntakịrị ma ọ bụrụ na ọ dị ntakịrị.
• Mgbanwe ugboro ole a na-atụnyere nkezi maka ịsa ya na oke ugboro dị obosara.
• Ya mere, ọdabara ihicha logarithm dị maka ihicha ya na oke oke ugboro.

4.4.4 Na-akpali ihichapụ:
Mgbe a na-asachapụ na-aga n'ihu, generator na-eji isi mmalite na-akpalite esịtidem na-aga n'ihu, na ịzacha na-aga n'ihu na ugboro ugboro. Pịa igodo 【trig】 ka ọkụ “trig” keyboard egosi, na mkpochapụ ga-akwụsị mgbe ị rutere na njedebe, mgbe ahụ oge ọ bụla ị pịa igodo 【trig】, ihicha ahụ na-agba otu ugboro wee kwụsị na mmalite ugboro na-echere ọzọ. ịkpalite.
Mpụga mpụga dịkwa.
Tinye TTL mgbama n'ime ọdụ ụgbọ mmiri 《Trig In 》 dị n'azụ panel.
Ntucha ahụ na-agba otu ugboro na nsọtụ mgbama mkpalite ọ bụla. N'ezie, oge mgbama mkpalite kwesịrị ibu karịa oge ihicha nke edobere.
Na ịsachapụ mkpalite, pịa igodo 【Sweep】, ihe ngosi ahụigodo “trig” ga-agbanyụ ma generator maliteghachi na ọnọdụ ịsa ahụ na-aga n'ihu.
4.4.5. Mmepụta mmekọrịta:

• N'oge a na-asachapụ ugboro ugboro, ọdụ ụgbọ mmiri "mmekọrịta" dị n'ihu panel na-emepụta mgbaàmà mmekọrịta.
• Ihe nrịbama mmekọrịta bụ akara ụda ebili mmiri nke nwere ọkwa TTL, nke ọnụ ọgụgụ na-arị elu nke ụbụrụ na-adaba na mmalite nke ịsa ahụ, na ọdịda ọdịda na-ejikọta ya na etiti etiti nke ebe a na-ekpochapụ, oge. pulse ife bụ otu ihe ahụ na-aza oge.

4.5. Ọrụ mgbawa
A kọwara na n'ụdị mgbawa, okwu ahụ bụ "gbawara" pụtara okirikiri nke ụdị ọ bụla, ọ bụghị naanị usu. N'ime mmepụta mgbawa, ngwá ọrụ na-ewepụta usoro ebili mmiri nwere ọnụ ọgụgụ okirikiri a kapịrị ọnụ yana n'oge a kapịrị ọnụ n'oge mmalite, ma ọ bụ ọ na-ewepụta usoro ebili mmiri nwere ọnụ ọgụgụ okirikiri akọwapụtara naanị otu ugboro. Enwere ike iji ụdị waveform 16 niile dị ka ịgbawa waveform, N'ezie, iji DC ma ọ bụ mkpọtụ mkpọtụ ka mgbawa mgbawa adịghị mma. Tupu abanye n'ọrụ mgbawa, ndị ọrụ kwesịrị ịtọ ụdị ifegharị, ugboro na amplitude nke mgbawa n'okpuru ọrụ continuity.
Pịa igodo 【Burst】 ka egosi ahụigodo “gbawara ọkụ, ọkụ ọkụ ga-abanye n'ọrụ mgbawa.
4.5.1. Oge ugboro ugboro:
Pịa igodo 【Menu】 ka agwa “Oge” ọkụ wee tọọ oge ugboro ugboro. Oge na-anọchi anya oge site na mmalite nke otu eriri pulse ruo na mmalite nke na-esote nke ga-adị ogologo oge iji nwee ọnụọgụ ọnụọgụ nke ntọala, dịka usoro a na-egosi:
Oge ugboro ugboro （Ọgụgụ usu ÷ Ugboro ugboro
Ọ bụrụ na ntọala oge ugboro ugboro dị mkpụmkpụ, ngwa ahụ ga-agbanwe ya ka ọ bụrụ ọnụ ahịa kacha nta ekwenyere.
4.5.2. Ọnụọgụ gbawara:
Pịa igodo 【Menu】 ka egosi “Ncyc” ọkụ, wee tọọ ọnụọgụ mgbawa. Ọnụọgụ mgbawa na-anọchi anya ọnụọgụ okirikiri nke eriri pulse n'ime oge ugboro ugboro, nke ga-abụrịrị obere nke ga-adị n'ime otu oge ugboro ugboro, dịka usoro a na-egosi:
Ọnụọgụ usu ＜(oge ugboro ugboro × ugboro usu)
Ọ bụrụ na ntọala ọnụọgụ pulse buru oke ibu, ngwa a ga-agbanwe ya ka ọ bụrụ uru kacha ekwe omume.
4.5.3. Malite phase:
Pịa igodo 【Menu】 iji mee ka agwa “Fase” gbanye, wee tọọ uru mmalite na ngwụcha nkeji. Mmalite na njedebe nke eriri pulse na-adị mgbe niile n'otu oge nke usoro waveform, a na-akpọ usoro a dị ka mmalite mmalite. Oke ntọala usoro mmalite bụ 0° ruo 360°, ọ nweghị maka ifegharị square.
4.5.4. Mkpali gbawara:
Na ọnọdụ mgbawa na-aga n'ihu, generator na-eji isi mmalite na-akpalite esịtidem na-aga n'ihu iji wepụta mgbawa na-aga n'ihu dabere na oge ugboro ugboro yana ọnụọgụ gbawara agbagoro tupu oge eruo. Pịa igodo 【trig】 ka ọkụ “trig” keyboard egosi, mpụta mpụta na-akwụsị na generator na-ewepụta mgbawa oge ọ bụla na ịpị igodo 【trig】, wee na-aga n'ihu n'isi mmalite ma chere maka mkpalite ọzọ. Ịnwekwara ike iji isi mmalite na-akpalite mpụga, ntinye TTL na-akpalite mgbama sitere na njikọ azụ "Trig In". Igwe na-ere ọkụ na-ewepụta mgbawa n'akụkụ ọ bụla na-arị elu nke mgbama mkpalite, wee na-aga n'ihu n'isi mmalite ma chere maka mkpalite ọzọ. N'ezie, okirikiri mgbama mkpalite kwesịrị ikwekọ n'ọnọdụ mmachi nke oge mgbawa. Mgbe mkpalite gbawara, a na-eleghara ntọala oge anya. Mgbe mkpalite gbawara, pịa igodo 【Burst】, ọkụ ahụ ahụ "trig" ahụ ga-agbanyụ ma generator ga-amaliteghachi na ọnọdụ mgbawa na-aga n'ihu.
4.5.5. Mmepụta mmekọrịta:
N'agbanyeghị na mgbawa na-aga n'ihu, ọnọdụ ịgbawa otu ma ọ bụ ọnọdụ mmepụta gated, enwere ike ịpụta mgbaàmà mmekọrịta site na njikọ "mmekọrịta" n'ihu panel. Ọ bụ ebili mmiri nke ọkwa TTL, ọnụ ya na-arị elu kwekọrọ na mmalite mmalite, ebe ọdịda ọdịda kwekọrọ na njedebe nke mgbawa ahụ. Nke ahụ bụ, n'oge na-aga n'ihu nke mgbawa, mmepụta mmekọrịta na-eme ka ọkwa dị elu; n'oge nkwụsị nke mgbawa, mmepụta mmekọrịta na-anọgide na-adị ala.
Na mgbawa na-aga n'ihu, pịa igodo 【Burst】 ọzọ, ihe ngosi ahụigodo ga-agbanyụ, ọrụ ọpụpụ nke jenerato wee laghachi azụ n'ịrụ ọrụ na-aga n'ihu.
4.6. Mgbanwe ugboro ugboro (FM)
Na ngbanwe ugboro ugboro, ugboro nke onye na-ebu ya na-adịgasị iche site na ngwa ngwa voltage nke modulating waveform, ihe niile 16 waveforms nwere ike iji dị ka ụgbọelu na-efegharị, N'ezie, iji DC ma ọ bụ mkpọtụ dị ka ụgbọelu ife bụ adịghị irè. Tupu ịbanye na mgbanwe mgbanwe ugboro, ndị ọrụ kwesịrị ibu ụzọ tọọ ụdị ifegharị, ugboro na amplitude nke ebu ife n'okpuru aga n'ihu ọrụ.
Pịa igodo 【FM】, akara ahụigodo nke “FM” ga-agbanye, igwe na-ebunye ọkụ ga-abanye n'ọrụ mgbanwe ugboro.
4.6.1 Ugboro mgbanwe:
Pịa igodo 【Menu】 ka ọkụ agwa “Mod_f”, wee tọọ uru ugboro mgbanwe mgbanwe. Na FM, ugboro modulation na-adịkarị ala karịa ugboro ndị na-ebu ya.
4.6.2 Ngbanwe ugboro ugboro:
Pịa igodo 【Menu】 ka ọkụ agwa “Devia” wee tọọ uru ndapụta ugboro ugboro. Ntugharị ugboro ugboro na-anọchi anya mgbanwe ugboro ugboro nke ebili mmiri na-ebu mgbe usoro ebili mmiri na-emegharị ahụ zuru oke. ampọnọdụ n'oge usoro FM. Mgbe amplitude nke modulating waveform dị na ọnụ ahịa kacha dị mma, ugboro mmepụta hà nhata ugboro ugboro nke onye na-ebu ya gbakwunyere ngbanwe ugboro ugboro, ma mgbe ọ dị na ọnụ ahịa kacha elu na-adịghị mma, ugboro ugboro mmepụta na-adaba ugboro ole onye na-ebu ya na-ewepu nkwụsị nke ugboro ugboro. . Ya mere, ntọala ngbanwe ugboro ga-adabarịrị n'ọnọdụ abụọ a:
(Ugboro onye na-ebu - ndapụta ugboro) > 0
(Ugboro ole na-ebu ibu + ntụgharị ugboro ugboro) < Oke oke nke generator
4.6.3 Ụdị ebili mmiri na-agbanwe:
Pịa 【Menu】 igodo na-enwupụta agwa “ọdịdị” ọkụ, egosipụtara usoro ebili mmiri ugbu a, ntinye modulation waveform No. ya na igodo ọnụọgụ ma ọ bụ ngbanwe knob iji họrọ ụdị ebili mmiri modulation, ụdị mgbanwe mgbanwe nwere ike ịbụ nke ọ bụla n'ime ụdị iri na isii ahụ. nke ụdị ebili mmiri edepụtara na tebụl ebili mmiri na ngalaba 16.
4.6.4. Mmepụta mmekọrịta:
Na FM, onye na-emepụta ihe na-ewepụta akara ngosi mmekọrịta site na njikọ njikọ "mmekọrịta" n'ihu, nke bụ ebili mmiri nke nwere ọkwa TTL na okirikiri ọrụ 50%, ugboro ya hà nhata na-emegharị ugboro ugboro ma na-ezo aka na usoro ya na usoro nke modulating ife .
Na FM, pịa igodo 【FM】, ọkụ ahụigodo nke "FM" ga-agbanyụ, onye na-ebunye ọkụ ga-apụ n'ọrụ mgbanwe ugboro wee laghachi azụ n'ọrụ na-aga n'ihu.
4.7. Ampmodulation litude (AM)
Na AM, ndị amplitude nke ụgbọelu na-adịgasị iche site na ngwa ngwa voltage nke modulating waveform, ihe niile 16 waveforms nwere ike iji dị ka ụgbọelu ebili mmiri, N'ezie, ọ bụ adịghị mma iji DC ma ọ bụ mkpọtụ. Tupu ịbanye ampmodulation litude, ndị ọrụ kwesịrị ibu ụzọ tọọ ụdị ebili mmiri, ugboro na amplitude nke ebu ife n'okpuru aga n'ihu ọrụ.
Pịa igodo 【AM】, ọkụ ahụigodo nke "AM" ga-agbanye wee banye na generator. amplitude modulation ọrụ.
4.7.1. Ugboro mgbanwe: 
Pịa igodo 【Menu】 ka ọkụ agwa “Mod_f”, wee tọọ uru ugboro mgbanwe mgbanwe. Na AM, ugboro modulation na-adịkarị ala karịa ugboro ndị na-ebu.
4.7.2. omimi mgbanwe:
Pịa igodo 【Menu】 ka ọkụ agwa “Omimi”, wee tọọ uru omimi mgbanwe mgbanwe. Omimi ngbanwe na-anọchite anya pasentịtage nke mgbanwe nke ebu amplitude na ampuru ntọala litude mgbe ebili mmiri na-emegharị ahụ jupụtara ampakwụkwọ n'oge usoro AM. Ọ bụrụ na kacha ampA na-akpọ litude of the modulated waveform ka Amax, kacha nta amplitude dị ka Amin, the ampuru ntọala litude dị ka A, omimi mgbanwe dị ka M, yabụ mmekọrịta dị n'etiti ụkpụrụ anọ bụ:
Amax ＝ (1 + M) x A ÷ 2.2 Amin ＝ (1 – M) x A ÷ 2.2
Mgbe ahụ omimi mgbanwe bụ M ＝ (Amax – Amin) x 1.1÷A
Ọ bụrụ na omimi mgbanwe mgbanwe bụ 120%, Amax = A, Amin = -0.09A.
Ọ bụrụ na omimi modulation bụ 100%, Amax = 0.909A, Amin = 0.
Ọ bụrụ na omimi mgbanwe bụ 50%, Amax = 0.682A, Amin = 0.227A.
Ọ bụrụ na omimi mgbanwe bụ 0%, Amax = 0.455A, Amin = 0.455A.
Nke ahụ bụ, mgbe omimi modulation bụ 0, ụgbọelu amplitude bụ ọkara nke ampntọala litude.
4.7.3. Ụdị ntụgharị mgbanwe:
Pịa 【Menu】 igodo na-enwupụta agwa “ọdịdị” ọkụ, egosipụtara usoro ebili mmiri ugbu a, ntinye modulation waveform No. ya na igodo ọnụọgụ ma ọ bụ ngbanwe knob iji họrọ ụdị ebili mmiri modulation, ụdị mgbanwe mgbanwe nwere ike ịbụ nke ọ bụla n'ime ụdị iri na isii ahụ. nke ụdị ebili mmiri edepụtara na tebụl ebili mmiri na ngalaba 16.
4.7.4. Mmepụta mmekọrịta:
Na AM, onye na-emepụta ihe na-ewepụta akara ngosi mmekọrịta site na njikọ njikọ "mmekọrịta" n'ihu, nke bụ square ebili mmiri na ọkwa TTL na 50% ọrụ okirikiri, ugboro ya hà nhata na-emegharị ugboro ugboro na usoro ya na-ezo aka na akụkụ nke mgbaàmà modulating. .
Na AM, pịa igodo 【AM】 ọzọ, ọkụ "AM" ga-agbanyụ, na generator ga-apụ n'ọrụ AM wee laghachi azụ n'ọrụ na-aga n'ihu.
4.8 Mgbanwe usoro (PM)
N'ime PM, akụkụ nke onye na-ebu ya na-adịgasị iche site na ngwa ngwa voltage nke modulating waveform.
Enwere ike iji ụdị ebili mmiri iri na isii ahụ dị ka ihe na-ebu ibu.
N'ezie, iji DC ma ọ bụ mkpọtụ adịghị mma.
Tupu ịbanye n'ụdị modulation, ndị ọrụ kwesịrị ibu ụzọ tọọ ụdị ifegharị, ugboro na amplitude nke ebu ife n'okpuru aga n'ihu ọrụ.
Pịa igodo 【PM】 ka ọkụ "PM", generator na-abanye n'ọrụ PM.
4.8.1. Ugboro mgbanwe:
Pịa igodo 【Menu】 ka ọkụ agwa “Mod_f” wee tọọ uru ugboro mgbanwe mgbanwe.
Na PM, ugboro modulation na-adịkarị ala karịa ugboro ndị na-ebu.
4.8.2. Ngbanwe usoro:
Pịa igodo 【Menu】 iji mee ka agwa “Devia” gbanye, wee tọọ uru ndapụta nke ngalaba.
Ngbanwe nke usoro na-anọchite anya mgbanwe nke usoro ihe na-ebu mgbe usoro ebili mmiri na-emegharị ahụ zuru amplitude na usoro modulation. Mgbe amplitude nke modulating waveform bụ na ezigbo ọnụ ahịa kasị mma, akụkụ nke mgbaàmà arụpụtapụtara na-abawanye otu ngbanwe nke otu akụkụ, ma ọ bụrụ na ọ dị na ọnụ ahịa kachasị elu na-adịghị mma, akụkụ nke mgbaàmà a na-emepụta na-ebelata otu ngbanwe oge.
4.8.3. Ụdị ntụgharị mgbanwe:
Pịa 【Menu】 igodo na-enwupụta agwa “ọdịdị” ọkụ, egosipụtara usoro ebili mmiri ugbu a, ntinye modulation waveform No. ya na igodo ọnụọgụ ma ọ bụ ngbanwe knob iji họrọ ụdị ebili mmiri modulation, ụdị mgbanwe mgbanwe nwere ike ịbụ nke ọ bụla n'ime ụdị iri na isii ahụ. nke ụdị ebili mmiri edepụtara na tebụl ebili mmiri na ngalaba 16.
4.8.4. Mmepụta mmekọrịta:
Na PM, onye na-emepụta ihe na-ewepụta akara ngosi mmekọrịta site na njikọ njikọ "mmekọrịta" n'ihu, nke bụ square ebili mmiri nwere ọkwa TTL na 50% ọrụ okirikiri, ugboro ya hà nhata na-emegharị ugboro ugboro na usoro ya na-ezo aka na akụkụ nke modulating. mgbaàmà.
Na PM, pịa igodo 【PM】, ọkụ ahụ ahụ "PM" ga-agbanyụ, generator na-apụ n'ọrụ PM wee laghachi azụ n'ịrụ ọrụ na-aga n'ihu.
4.9. Mgbanwe obosara usu (PWM)
Na PWM, obosara usu nke onye na-ebu ya na-adịgasị iche na volta ozugbotage nke mgbama modulating, na ọdịdị ebili mmiri nke onye na-ebu ya aghaghị ịbụ ụda.
Tupu ịbanye na PWM, ndị ọrụ kwesịrị ibu ụzọ tọọ ugboro na amplitude nke ebu ife n'okpuru aga n'ihu ọrụ.
Pịa igodo 【PWM】, ihe ngosi ahụigodo nke “PWM” ga-adị ma onye na-emepụta ọkụ na-abanye n'ọrụ mgbanwe ụda obosara, a na-edobe ifegharị ụgbọelu na-akpaghị aka ka ọ bụrụ ebili mmiri.
4.9.1. Ugboro mgbanwe:
Pịa igodo 【Menu】 ka ọkụ agwa “Mod_f” wee tọọ uru ugboro mgbanwe mgbanwe. N'ihe ngbanwe n'obosara pulse, ọnụọgụ mgbanwe dị ala karịa ugboro ndị na-ebu ya.
4.9.2. Ngbanwe obosara usu:
Pịa igodo 【NchNhr】 ka egosi “Omimi” ọkụ wee tọọ uru ndapụta obosara pulse. Ọ na-anọchi anya mgbanwe nke obosara usu ihe na-ebu ibu ruo n'oge pulse mgbe modulating waveform zuru oke. amplitude n'oge usoro PWM, yana mgbanwe nke okirikiri ọrụ. Kpọọ okirikiri ọrụ kacha arụ ọrụ nke onye na-ebu modulated dị ka Dmax, yana opekempe dị ka Dmin, usoro ngbanwe n'obosara pulse kwesịrị ịbụ:
Ntughari obosara usu = Dmax – Dmin
Ọ bụrụ na Dmax = 80%, Dmin = 20%, pulse obosara deviation bụ 60%.
Ọ bụrụ na Dmax = 50%, Dmin = 50%, pulse obosara deviation kwesịrị ịbụ 0%.
Ya bụ, mgbe pulse obosara deviation bụ 0, ọrụ okirikiri nke pulse ife bụ 50%.
4.9.3. Ụdị ntụgharị mgbanwe:
Pịa 【Menu】 igodo na-enwupụta agwa “ọdịdị” ọkụ, egosipụtara usoro ebili mmiri ugbu a, ntinye modulation waveform No. ya na igodo ọnụọgụ ma ọ bụ ngbanwe knob iji họrọ ụdị ebili mmiri modulation, ụdị mgbanwe mgbanwe nwere ike ịbụ nke ọ bụla n'ime ụdị iri na isii ahụ. nke ụdị ebili mmiri edepụtara na tebụl ebili mmiri na ngalaba 16.
4.9.4. Mmepụta mmekọrịta:
Na PWM, onye na-emepụta ihe na-ewepụta akara ngosi mmekọrịta site na njikọ njikọ "mmekọrịta" n'ihu, nke bụ ebili mmiri nke nwere ọkwa TTL na 50% ọrụ okirikiri, ugboro ya hà nhata na-emegharị ugboro ugboro na usoro ya na-ezo aka na akụkụ nke modulating. mgbaàmà.
Na PWM, pịa 【PWM】 igodo, ọkụ ahụigodo “PWM” ga-agbanyụ, na generator ga-apụ n'ọrụ PWM wee laghachi azụ n'ọrụ na-aga n'ihu.
4.10. igodo ngbanwe ugboro ugboro (FSK)
Na FSK, ugboro ole nke onye na-ebu ya na-agbanwe n'etiti "ugboro ugboro" na "ụtụ hop" ọzọ, ọnụ ọgụgụ nke mmepụta mgbanwe na-ekpebi site na ọnụego hop.
Enwere ike iji ụdị ebili mmiri iri na isii dị ka ebili mmiri na-ebu.
N'ezie, iji DC ma ọ bụ mgbama mkpọtụ dị ka ebili mmiri ebu adịghị mma.
Tupu ịbanye na FSK, ndị ọrụ kwesịrị ibu ụzọ tọọ ụdị ebili mmiri, ugboro na amplitude nke ebu ife n'okpuru aga n'ihu ọrụ.
Pịa igodo 【FSK】 ka ọkụ "FSK" ahụigodo egosi, generator na-abanye n'ọrụ FSK.
4.10.1. Ọnụ ego hop:
Pịa igodo 【Menu】 iji mee ka agwa “Rate” ọkụ, wee tọọ ọnụ ahịa hop hop uru.
Na FSK, a na-edozi ụdị ebili mmiri na-emegharị ahụ ka ọ bụrụ square ebili mmiri na 50% ọrụ okirikiri, ugboro nke square ifegharị bụ hop ọnụego.
4.10.2. Ugboro hop:
Igodo mgbanwe ugboro ugboro yiri FM nke ụdị ebili mmiri na-emegharị ya bụ square.
"Ugboro hop" yiri "Frequency offset", na ọdịiche nke, ugboro ugboro nkwụghachi bụ uru akwụ ụgwọ na ugboro nke ụgbọelu ife nti ma ọ bụ nke na-adịghị mma, nke ebe nhazi ya na-ejikọta na ugboro nke ikuku na-ebu, enwere ike ịtọ ugboro ugboro hop. na-akaghị aka n'ime oke ugboro niile, ọ nweghị mmekọrịta na ugboro ole ebu.
4.10.3. Mkpalite mpụga:
Mgbe ịbanye n'ime ọrụ FSK, onye na-emepụta ọkụ na-eji isi mmalite nke ime ihe dị ka ndabara, na-ewepụta akara ngosi FSK dabere na nhazi ọnụego hop.
Pịa igodo 【trig】, ihe ngosi ahụigodo “trig” ga-adị ma onye na-ebunye ọkụ na-abanye n'ụdị FSK site na iji mpụta mpụta.
A na-esi na njikọ azụ "Trig In" tinye akara mgbama na ọkwa TTL.
Ọ bụrụ na ọkwa nke mgbaàmà na-eme ka ọ dị ala, ugboro ole nke mmepụta ihe bụ nke onye na-ebu ya, ma ọ bụrụ na ọkwa nke mgbaàmà na-eme ka ọ dị elu, ugboro ugboro nke mmepụta ihe bụ hop ugboro.
Mgbe ị na-eji mkpalite mpụga, a na-eleghara ntọala nke ọnụego hop anya. Mgbe ị na-eji mpụta mpụta, pịa igodo 【FSK】, ihe ngosi ahụigodo “trig” ga-agbanyụ ma generator malitegharịa na ọnọdụ ịkpalite ime.
4.10.4 Mmepụta mmekọrịta:
Na FSK, onye na-emepụta ihe na-emepụta akara ngosi mmekọrịta site na n'ihu panel "mmekọrịta" njikọ, nke bụ square ebili mmiri na ọkwa TTL na 50% ọrụ okirikiri, ugboro ya hà nhata hop ọnụego. Ọ bụrụ nrịbama mmepụta bụ onye na-ebu, a na-ewepụta akara ngosi mmekọrịta dị ala. Ọ bụrụ na mmepụta bụ ugboro hop, a na-ewepụta akara ngosi mmekọrịta dị elu.
N'ime ihe na-akpali FSK, pịa igodo 【FSK】 ọzọ, akara ahụigodo “FSK” ga-agbanyụ, onye na-ebunye ọkụ na-apụ n'ọrụ FSK wee laghachi azụ n'ọrụ na-aga n'ihu.

4.11. ọdụ ụgbọ mmiri mmepụta:
Enwere ọdụ ụgbọ mmiri abụọ dị n'ihu panel nke ngwá ọrụ ahụ, ndị ọrụ agaghị etinye akara ngosi na ọdụ ụgbọ mmiri dị ka ohere nke imebi ngwá ọrụ ahụ.
4.11.1. ọdụ ụgbọ mmiri mbupute:
* 【 Mmepụta】 ： akara ngosi nke ngwa ahụ na-ebute bụ ihe niile sitere na ọdụ ụgbọ mmiri nrụpụta, pịa igodo 【 Output】 ka imepe ma ọ bụ mechie mgbaama si n'ọdụ ụgbọ mmiri mmepụta okirikiri.

* Ọdụ ụgbọ mmiri a na-emepụta na-emeghe mgbe ọkụ "mmepụta", na-emechi mgbe "mmepụta" gbanyụrụ. Ọ bụrụ na jikọọ na-ezighi ezi elu voltage iji gosi n'ọdụ ụgbọ mmiri, ngwá ọrụ ga-ata ahụhụ "inverse ndochi" ihe ize ndụ, na mgbe ahụ ngwá ọrụ ga-agbanye ọrụ nchebe, mechie ozugbo mgbaàmà n'ọdụ ụgbọ mmiri na-eme ka mkpu na "mmepụta" ìhè gbanyụọ. N'okwu a, ị ga-enyocha ibu mpụga, naanị mgbe iwepu ọdịda ahụ nwere ike pịa igodo 【 mmepụta】 iji mepee ọdụ ụgbọ mmiri mmepụta.
4.11.2. Port mmepụta mmekọrịta 《 Mmekọrịta》:
Mmepụta pulse wave dakọtara na TTL na CMOS, ọkwa dị elu> 4 V, ọkwa dị ala <0,3 V.

1. N'okpuru ọrụ otu ugboro, mgbaàmà mmekọrịta bụ akara ngosi square nwere ọkwa TTL, ugboro nke mgbaàmà mmekọrịta bụ otu ugboro nke mgbaàmà sitere na ọdụ ụgbọ mmiri 《 mmepụta》, mgbe a na-ahazi usoro ahụ ka ọ bụrụ 0, usoro nke mgbaàmà mmekọrịta bụ. dị ka akụkụ nke mgbaàmà sitere na ọdụ ụgbọ mmiri 《 Mmepụta 》. Mgbe a na-ahazi usoro ahụ ka ọ bụrụ 1, akụkụ nke mgbaàmà mmekọrịta bụ ihe megidere akụkụ nke mgbama sitere na ọdụ ụgbọ mmiri 【 Mmepụta】.
2. N'okpuru ọrụ ịsachapụ ugboro ugboro, mgbaàmà mmekọrịta bụ akara usu nwere ọkwa TTL, ọnụ na-arị elu nke egwuregwu ebili mmiri nke ebili mmiri yana mmalite mmalite nke ịsa ahụ, yana ọdịda ọdịda nke egwuregwu ebili mmiri yana yana etiti etiti nke ikpochapụ. , oge nke pulse wave bụ otu ihe ahụ na oge ịsa.
3. Na FM, AM, PM, PWM modulation, mgbama mmekọrịta bụ square ebili mmiri nwere 50% ọrụ okirikiri, nke ugboro ya hà ugboro nke modulating waveform na oge na-ezo aka na-adọ nke modulating waveform.
4. Na FSK, mgbaàmà mmekọrịta bụ ebili mmiri square nwere 50% ọrụ okirikiri, nke ugboro ya hà nhata hop, mgbe ọ na-emepụta ugboro ugboro, mgbaàmà mmekọrịta dị ala; mgbe ị na-emepụta ugboro hop, mgbaàmà mmekọrịta dị elu.
5. Mgbe mmepụta eriri pulse, mgbaama mmekọrịta bụ ebili mmiri nke oke nrịgo ya kwekọrọ na mmalite mmalite, ọdịda ọdịda dabara na ebe nkwụsị, na okirikiri nhata eriri pulse ugboro ugboro okirikiri.
6. Na ihicha ugboro ugboro, eriri pulse na FSK, ọ bụrụ na họrọ akpalite ntuziaka ma ọ bụ mkpalite mpụga, a ga-ekpebi ugboro mgbaàmà mmekọrịta site na mgbama mkpalite.

4.12. ọdụ ụgbọ mmiri ntinye
Enwere ọdụ ụgbọ mmiri ntinye 【Trig In】 na azụ azụ nke generator, nke enwere ike iji naanị dị ka ọwa ntinye nke mgbaàmà mpụga, mana ọ bụghị ọwa mmepụta. Enwere ike iji ọdụ ụgbọ mmiri a dị ka ọwa ntinye nke mgbaàmà pulse nke dabara na TTL na CMOS, ọkwa dị elu dị elu karịa 4V, na ọkwa dị ala dị ala karịa 0.3V.
4.13. Ihe omume mmemme
Enwere oghere oghere ngwaọrụ USB 【USB Device】 n'azụ panel nke akụrụngwa, nke enwere ike ijikwa ngwa ahụ site na mmemme site na iji eriri USB jikọọ na kọmputa. A kọwara usoro ojiji nke interface a n'ụzọ zuru ezu na CD nke jikọtara ya na ngwa.
4.14. Nhazi nhazi

• A na-ahazi ngwa ahụ tupu ebupu ya, mana ụfọdụ nkọwa nwere ike gbanwee ntakịrị n'oge ogologo oge eji. Iji hụ na izi ezi, a ga-ahazi ngwa ahụ ogologo oge.
• Ndị ọrụ nwere ike nwetaghachi izi ezi nke ngwa ahụ site na iji ahụigodo iji mezie nkọwapụta ndị bụ isi na-ewepụghị mkpuchi nke ngwaọrụ ahụ.

4.14.1. Kwado mmezi:

• Ka emechara booting, nhazigharị ahụ adịkwaghị steeti, na enweghị ike ịhazi igwe ọkụ na-etinyeghị paswọọdụ ngbanwe, nke a bụ ụzọ isi chebe paramita calibrated nke enwere ike gbanwee na-akpachapụghị anya.
• Iji mee nhazi nhazi, họrọ sine wave wee pịa 【Shift 】 【Cal】-key, okwuntughe nhazi ego gosipụtara dị ka 0, paswọọdụ ntinye calibration 1900, pịa 【N 】- igodo iji mee nhazi nhazi.

4.14.2. Nhazi nhazi:

• Pịa 【NchNhr】- igodo iji gosipụta uru nzizi n'aka ekpe, yana nọmba usoro nhazi n'aka nri mgbe ị na-edobe ọnọdụ mmezi na-akpaghị aka.
• Gbanwee uru nzizi ka ịhazigharị nhọrọ mmezi ahọpụtara ugbu a wee mee ka a na-atụ anya ya.
• Gaa n'ihu pịa 【Menu】- igodo na nọmba usoro nhazi ga-abawanye site na nzọụkwụ, ndị ọrụ nwere ike hazie nhọrọ ndị ahụ n'otu n'otu, nke egosiri na listi na-esonụ.
• N'oge usoro mmezi, pịa igodo 【Cal】-mgbe ọ bụla wee pịa 【Menu】-igodo ka iweghachi nọmba usoro nhazi na 00.

Tebụlụ nhazi nhazi

Usoro Mba.	Uru mmezi nke ọma	Ntinye aha aha	Gbanwee uru nzizi ruo mgbe mpụtara dị n'ime oke mperi
0	2047	0 VDC	Ndozi efu: mmepụta DC voltage dị ka: -20-20 mVDC
1	870	10 VDC	Mmezi mmezi: mmepụta DC voltage dị ka: 9.88 - 10.12 VDC
2	873	7 Vrm	Amplitude calibration: mmepụta AC voltage dị ka: 6.928 - 7.072 Vrms
3	300	0.71 Vrm	Amplitude calibration: mmepụta AC voltage dị ka: 0.701 - 0.719 Vrms
4	500	1 MHz	Nhazi ugboro ugboro: ugboro mmepụta ka: 1 MHz ± 20 Hz
05 –	100	5Vp	Ndozi larịị: mmepụta amplitude dị ka. 4,5 Vpp - 5,5 Vpp

** P 4055: Usoro-no.: 05 ~ 07
P 4060: Usoro-no.: 05~24
4.14.3. Gbanyụọ mmezi:

• Mgbe ịmechara calibration, pịa igodo 【Shift】&【Cal】 wee gosi 1900, pịa igodo ọnụọgụ ọ bụla wee 【N】 ka ịchekwaa paramita calibration, gbanyụọ calibration wee pụọ na usoro ahụ.
• N'oge usoro nhazigharị, ọ bụrụ na mmezi mmezi na-ezighi ezi, pịa igodo 【Freq】 n'oge ọ bụla iji gbanyụọ mmezi na pụọ ​​na-enweghị echekwa nhazi nhazi.
• Mgbe ịmalitegharịchara, onye na-ebunye ọkụ na-echeta ozugbo wee jiri paramita mmezi echekwara n'oge nhazi ikpeazụ.

4.15. Ntọala izizi
4.15.1. Ọrụ na-aga n'ihu:
Ịga n'ihu ọrụ bụ ndabara mgbe booting.

Waveform	sinewave
Ugboro ugboro	1 kHz
Amplitude	1Vp
Attenuation	akpaaka
Akwụsịghị	0Vdc
okirikiri ọrụ	50%
Usoro mmepụta	0°
ọdụ ụgbọ mmiri mmepụta	meghere

4.15.2. Ọrụ mkpochapụ ugboro ugboro:

Malite ugboro ugboro	100 Hz
Ugboro ngwụcha	1 kHz
Oge mkpochapụ	3 s
Ụdị nzacha	linearity
Ụdị ịkpali	n'ime, na-aga n'ihu

4.15.3. fesa:

Oge ugboro ugboro	10ms
Ngụ gbawara	3
Usoro mmalite	0°
Ụdị ịkpali	n'ime, na-aga n'ihu

4.15.4. Mgbanwe (FM, AM, PM, PWM):

Ugboro mgbanwe	1 kHz
Ngbanwe ugboro mgbanwe mgbanwe	1 kHz
Mgbanwe ampomimi litude	100%
Nkwụsị usoro	180°
Mgbanwe obosara omimi	50%
Modulation ifegharị	Sine

4.15.5. FSK

Ọnụ ego hop	1 kHz
Ugboro hop	4 kHz
Modulation ifegharị	square
Ụdị ịkpali	n'ime, na-aga n'ihu

4.16. Ike ampna -emegharị ihe
Ngalaba ahụ nwere ike agbakwunyere amponye ndu. Ọ bụ ihe nwere onwe ya nke generator,'AmpLifer In' dị n'azụ panel bụ njikọ ntinye ike amplifier na 'Amlifer Out' bụ njikọ mmepụta nke ike amponye ndu. Jikọọ mgbaàmà ntinye na 'Amplifer In' njikọ, mgbe ahụ ampEnwere ike nweta mgbaama dị elu na njikọ nke 'Amlifer Out'. Mgbama ntinye nwere ike ịbụ mgbama mmepụta nke ngwa a ma ọ bụ ngwaọrụ ọzọ.
4.16.1 Ntinye Waveform
Sine.
Maka ụdị ebili mmiri ndị ọzọ, mgbagha ga-adị oke oke. A naghị atụ aro ka itinye ụdị ebili mmiri ndị ọzọ karịa sine.
4.16.2. Ntinye voltage:
The multiple nke ike amplifier bụ okpukpu abụọ na mmepụta kachasị amplitude bụ 9 VRMS. Ya mere ntinye kachasị ampLitude kwesịrị ịmachi n'ime 4,5 VRMS. A ga-agbagọ mgbaama mmepụta karịa oke.
4.16.3. Oke ugboro:
Ogologo oge nke ike ampIgwe ọkụ bụ 100Hz ~ 10kHz.
4.16.4. Ike mmepụta:

• Ngosipụta nke ike maka ike amponye na-eme ihe ike isP = V2 / R
• Ebe, P bụ ike mmepụta ( unit bụ W), V bụ mmepụta mebere ampuru litude (otu ahụ bụ Vrms), R bụ nguzogide ibu (nkeji bụ Ω).
• Ihe kacha pụta amplitude nwere ike iru 9 VRMS na obere nguzogide ibu nwere ike ịbụ 2Ω.

E wezụga nke ahụ, elu okpomọkụ nke gburugburu ebe obibi na-arụ ọrụ, nke ka ukwuu bụ ugboro nke mgbaàmà mmepụta na mgbagwoju anya nke mgbaàmà mmepụta. Ọtụtụ mgbe, ike mmepụta kachasị nwere ike iru 10 W (8Ω).
4.16.5. Nchedo mmepụta:
Ike amplifier bụ ọrụ nchebe sekit dị mkpụmkpụ yana n'elu nchebe ọkụ. Ọ na-abụkarị enweghị ike ibibi mana ogologo oge mmepụta obere sekit kwesịrị izere. Ugboro ugboro, amplitude na loading kwesịrị ka mma n'ime mmachi, abụọ n'ime ha, karịsịa, enweghị ike nweta mmachi n'otu oge ahụ bụrụ na ike. amplifier mebiri emebi.

Nkọwapụta

5.1. Njirimara nke ọwa A
5.1.1. Njirimara Waveform:

Ụdị waveform	Ụdị 16 gụnyere sine, square. ramp. exponent, mkpọtụ na na.
Ogologo waveform	1024 isi
Sampọnụego ling	100 MSa/s
Ampmkpebi nke litude	8 ibeji
Mgbagha nke Harmonic (1Vpp)	s-40 dBc (<5 MHz) s-35 dBc (> 5 MHz)
Mkpokọta mgbagha nke sine	s0.5% (20 Hz - 20 kHz/20Vpp)
Oge na-ebili / ọdịda Edge	s35 ns. gafere oge ịse: 10%
Ọrụ okirikiri nke Square	0,1% - 99.9%
Ramp symmetry	0.0% - 100.0%

5.1.2. Njirimara ugboro ugboro:

Oke ugboro	Sine	P 4055	10 pHz - 3 MHz
		P 4060	10 pHz - 20 MHz
	Square	P 4055	10 pHz - 3 MHz
		P 4060	10 pHz - 5 MHz
	Ndị ọzọ		10 pHz - 1 MHz
Mkpebi	10 pHz
Izi ezi ugboro	± 50 ppm

5.1.3. Ampnjirimara litude:

Ampoke litude	ibu sekit mepere emepe	<8 MHz	0 mVpp - 20 Vpp
		> 8 MHz	0 mVpp - 18 Vpp
	50 ibu	<8 MHz	0 mVpp - 10 Vpp
		> 8 MHz	0 mVpp - 9 Vpp
Mkpebi	5mVp	maka amplitude> 2Vpp
	0.5mVp	maka ampakwụkwọ <2Vpp
Amplitude ziri ezi	± (1% + 2 mVrms)	ugboro bụ 1 kHz /> 5 mVrms
Amplitude flatness	±10%	Sine. tụnyere 1 MHz. 5 nkp
Mmebi nke mmepụta	500 nkịtị

5.1.4. Àgwà ndị akwụsịrị:

Oke mwepu	± 10 V DC (ibu sekit mepere emepe)
	± 5V DC (ibu 50 EL)
Mkpebi	DC DC 5 mV
Akwụsị izi ezi	± (1% + 20 mV DC)

5.1.5. Àmà na-asachapụ:

Waveform	Ụdị ebili mmiri 16 gụnyere sine, square, ramp. wdg.
Oke mkpochapụ	Enwere ike ịtọ ebe mmalite/ọgwụgwụ n'amaghị ama
Ọnụego mkpochapụ	50 ms - 500 s
Ụdị nzacha:	linearity, logarithm
Isi mmalite kpalite	esịtidem na-aga n'ihu, mgbama mpụga, akpalite ntuziaka

5.1.6. FM, AM, PM, PWM:

Ụdị ifegharị ụgbọelu		Ụdị ebili mmiri 16 gụnyere sine, square, ramp. wdg. (PWM naanị maka pulse)
Modulation ifegharị		Ụdị ebili mmiri iri na isii gụnyere sine. square. ramp. wdg.
Ugboro mgbanwe		40 mHz - 20 kHz
Mmezi ugboro ugboro	P 4055	10 pHz - 3 MHz
	P 4060	10 pHz - 20 MHz
Mgbanwe ampomimi litude		0%-120%
Nkwụsị usoro		0°-360°
Ọkpụkpụ obosara usu		0%-99%

5.1.7. FSK:

Ụdị ifegharị ụgbọelu		Ụdị ebili mmiri 16 gụnyere sine, square. ramp. wdg.
Modulation ifegharị		Square
Ọnụ ego FSK		40 mHz - 100 kHz
Ugboro hop	P 4055	10 pHz - 3 MHz
	P4060	10 pHz - 20 MHz
Isi mmalite kpalite		Ime na-aga n'ihu, mgbama mpụga

5.1.8. fesa:

Waveform	Ụdị ebili mmiri 16 gụnyere sine, square, ramp
Oge ugboro ugboro	1 ps - 20 nkeji
Ọnụọgụ akwara	1-1000000
Usoro mmalite	0°-360°
Isi mmalite kpalite	Ime na-aga n'ihu, mgbama mpụga, akpalite ntuziaka

5.2. Njirimara mmekọrịta-mmepụta

Njirimara Waveform:	Square. oge mgbụsị akwụkwọ	<20 ns
Ampnjirimara litude:	Ndakọrịta nke TTL. CMOS	Ọkwa dị ala <0.3 V dị elu> 4V

5.2.1 interface mmemme:
Ngwa USB interface, nke ntuziaka ọrụ dị na CD jikọtara ya na generator.
5.3. Ike ampna -emegharị ihe

Nbanye Nbanye	0 Vrm ruo 4.5 Vrms
Oke mmepụta voltage	9 Vrm
bandwit ugboro ugboro:	100 Hz - 10 kHz
Voltage Ampna -emegharị ihe	Ugboro abụọ
Ike mmepụta kacha	10W (ibu 8Q)

5.4. Njirimara izugbe

Ọnọdụ ike	Voltage	100 - 240 V AC
	Ugboro ugboro	45 - 65 Hz
	Ike	<20 VA
Ọnọdụ gburugburu	Okpomọkụ 0 Celsius C	-
	iru mmiri	<80% RH
Njirimara arụmọrụ	Ịrụ ọrụ ahụigodo zuru oke, na-eji mkpịsị na-agbanwe agbanwe.
Akụkụ (WxHxD)	256 x 102 x 322 mm
Ibu	1,5 n'arọ

Ikike niile, nakwa maka ntụgharị asụsụ, ibipụta na nnomi nke akwụkwọ ntuziaka a ma ọ bụ akụkụ ka edobere.
Mmegharị ụdị niile (photocopy, microfilm ma ọ bụ ndị ọzọ) naanị site na ikike ederede nke onye mbipụta.
Akwụkwọ ntuziaka a na-atụle ịmara teknụzụ kachasị ọhụrụ. Edobere mgbanwe teknụzụ.
Anyị herewith gosi, na nkeji na-calibrated site factory dị ka nkọwa dị ka kwa oru nkọwa.
Anyị na-akwado ka ịhazigharị unit ahụ ọzọ, mgbe otu afọ gachara.
© PeakTech ® 08/2021 Po./Ehr.

PeakTech Prüf-und Messtechnik GmbH
– Gerstenstieg 4 – DE-22926 Ahrensburg/Germany
+49-(0) 4102-97398 80
+49-(0) 4102-97398 99
  info@peaktech.de
www.peaktech.de