Ngwa PCE PCE-VC 20 Usoro Calibrator na-eme mkpọtụ
Nkọwapụta
- Oke ịma jijiji (ụkpụrụ RMS):
- Ngwa ngwa nke ịma jijiji: 10 mm/s
- Ọsọ nke ịma jijiji: 10 m
- Ngbanwe nke ịma jijiji: 159.15 Hz
- Ugboro redio: 1000/s
- Ngosipụta ọkwa: Oge nhazi <10 s
- Oke kachasị nke ihe nyocha maka izi ezi ekwuputara: 600 g
- Ihe na-eme mkpọtụ:
- Ike dị ike: 10 N
- Oke. ike: 2 nm
- Ike ọnụ ọgụgụ: 1 Nm
- Oke. ike ntụgharị: 20 Nm
- Ntugharị ntụgharị <10% nke isi axis, tụrụ 14 mm
n'elu shaker
- Ịkwado ihe nnwale: oghere M5 emetụ, 7 mm miri emi
- Clampihe ndọta magnetik
- Ọnọdụ okpomọkụ na-arụ ọrụ maka izi ezi 3%: 5% ziri ezi
- iru mmiri
Ntuziaka ojiji ngwaahịa
Ndetu nchekwa
Biko gụọ akwụkwọ ntuziaka a nke ọma na kpamkpam tupu i jiri ngwaọrụ ahụ maka oge mbụ. Enwere ike iji ngwaọrụ a naanị ndị ọrụ tozuru etozu yana ndị ọrụ PCE Instruments rụkwaa ya. Mmebi ma ọ bụ mmerụ ahụ kpatara site na idebe akwụkwọ ntuziaka anaghị ewepu na ụgwọ anyị, akwụkwọ ikike anyị ekpuchighi ya.
- A ghaghị iji ngwaọrụ a naanị dịka akọwara n'akwụkwọ ntuziaka a. Ọ bụrụ na ejiri ya mee ihe ọzọ, nke a nwere ike ibute ọnọdụ dị ize ndụ maka onye ọrụ yana mebie mita.
- Enwere ike iji ngwa ahụ naanị ma ọ bụrụ na ọnọdụ gburugburu ebe obibi (okpomọkụ, iru mmiri,…) dị n'ime oke ekwuputara na nkọwa nka. Ewepụla ngwaọrụ ahụ na oke okpomọkụ, ìhè anyanwụ kpọmkwem, oke iru mmiri ma ọ bụ mmiri mmiri.
- Ewepụla ngwaọrụ ahụ ka ọ maa jijiji ma ọ bụ ịma jijiji siri ike. Naanị ndị ọrụ PCE Instruments tozuru oke ga-emepe ikpe ahụ. Ejila ngwa mgbe aka gị dị mmiri. Ị gaghị eme mgbanwe teknụzụ ọ bụla na ngwaọrụ ahụ.
- Ekwesịrị iji mgbasa ozi sachaa ngwa ahụamp akwa . Jiri naanị pH-nọpụ iche Cleaner, enweghị abrasives ma ọ bụ ihe mgbaze. A ga-eji ngwaọrụ a na ngwa ngwa sitere na PCE Instruments ma ọ bụ ihe dakọtara mee ihe.
- Tupu ojiji ọ bụla, lelee igbe ahụ maka mmebi a na-ahụ anya. Ọ bụrụ na ihe mebiri emebi na-ahụ anya, ejikwala ngwaọrụ ahụ ejikwala ngwa na ikuku ikuku.
- A gaghị agafe oke nha dịka ekwuru na nkọwapụta n'ọnọdụ ọ bụla.
- Enweghị idebe ndetu nchekwa nwere ike imebi ngwaọrụ yana mmerụ ahụ onye ọrụ. Anyị anaghị ewere ụgwọ maka mperi mbipụta ma ọ bụ mmejọ ọ bụla ọzọ na ntuziaka a.
Anyị anaghị ewere ụgwọ maka mperi mbipụta ma ọ bụ mmejọ ọ bụla ọzọ na ntuziaka a. Anyị na-arụtụ aka n'ụzọ doro anya na usoro nkwa anyị n'ozuzu nke enwere ike ịchọta na usoro azụmahịa anyị n'ozuzu. Ọ bụrụ na ị nwere ajụjụ ọ bụla biko kpọtụrụ PCE Instruments. Enwere ike ịchọta nkọwa kọntaktị na njedebe nke akwụkwọ ntuziaka a.
Nkọwapụta
| Oke ịma jijiji (ụkpụrụ RMS) | ||
| Osooso ịma jijiji | 10m/s² | ± 3 % na 0 ruo 40 Celsius |
| Ọsọ nke ịma jijiji | 10 mm / s | ± 3 % na 0 ruo 40 Celsius |
| Ntugharị ịma jijiji | 10 μm | ± 3 % na 0 ruo 40 Celsius |
| Ugboro mmaji | 159.15 Hz | ± 0.05% na -10 ruo 55 Celsius |
| Ugboro redio | 1000/s | ± 0.05% na -10 ruo 55 Celsius |
| Ngosipụta ọkwa | Ngosipụta pasenti, n'elu ±3 % ụda ụda | |
| Oge nhazi | <10 s | |
| Oke kachasị nke ihe nyocha maka izi ezi ekwuputara | 600 g | |
| Ihe na-eme mkpọtụ | ||
| Ike dị ike | 10 N | |
| Oke. torque | 2 Nm | |
| torque aha | 1 Nm | |
| Oke. transverse ike | 20 Nm | |
| Transverse vibration | <10% nke isi axis, tụrụ 14 mm n'elu shaker | |
| Ịkwanye ihe nlele | Oghere enwetara M5, omimi 7 mm Clampnke magnet
Nrapado |
|
| Oke okpomọkụ na-arụ ọrụ maka
3% izi ezi 5% izi ezi |
0 ruo 40 Celsius C -10 ruo 55 Celsius |
|
| iru mmiri | <90% na 30 Celsius C, enweghị condensation | |
| Oghere ịgbasa magnetik na shaker | <0.2mT | |
| Ịnye ọkụ | Mgbakọ NiMH arụnyere, 7.2 V / 1.6 Ah | |
| Oge ọrụ batrị | Ihe ruru. 5 h na m = 100 g | |
| Charge oge nke accumulator | 3 h | |
| Chaji anya | DIN 45323 (5.5 / 2.1)
Ọnụ ọnụ dị mma na ntụtụ etiti |
|
| Ebubo voltage | 11 ruo 18 V DC | |
| chaja ugbu a | <1 A | |
| Akụkụ | 100 x 100 x 120 mm | |
| Ibu | 2.2 n'arọ | |
Nkọwa sistemu
Ebumnuche
- Nhazi dị mfe ma dị mfe nke mita vibration, ndekọ na akụrụngwa njikwa.
- Nyochaa ngwaọrụ na nrụnye oge niile.
- Ịchọta mmejọ.
Njirimara
- Ngwa batrị dị mma na nke siri ike maka ụlọ nyocha na iji ubi.
- Ibu oke ịma jijiji na-adabere na ya na iji ubi.
- 10 m/s2 osooso ịma jijiji
- 10 mm/s ọsọ ịma jijiji
- 10 μm nchụpụ ịma jijiji
- Quartz kwụsiri ike ugboro vibration nke 159.15 Hz (radian ugboro 1000/s).
- Kwesịrị ekwesị maka ihe nlele nke ruru 600g.
PCE-VC20 calibrator nke na-eme mkpọtụ na-ewepụta ụda igwe na-eji quartz kwụsie ike ugboro yana oke a na-achịkwa nke ọma. Enwere ike ịhazi ihe mmetụta ịma jijiji, gụnyere eriri ejikọrọ, ihe nrụnye mgbama na ngwa ịgụpụta n'ọsọ ọsọ, nkeji ma ọ bụ mbugharị. Accelerometer ntụaka n'ime isi shaker na sekit njikwa na-eme ka ọkwa ịma jijiji na-adị mgbe niile ma na-adabereghị n'ịdị arọ nke ihe nledo agbakwunyere. Ngosipụta na-egosi mperi dị na pasentị. Enwere ịdọ aka ná ntị ụda mgbe oke njehie gafere. N'ihi batrị enwere ike ịchaji n'ime ya, PCE-VC20 dabara nke ọma maka ngwa mkpanaka. Ngwa ahụ nwere ọrụ mgbanyụ ọkụ na-egbochi ịwụsa na mberede. Ngosipụta na-egosi ọnọdụ ịchaji batrị. Nkeji ahụ na-abịa na ngwa ngwa mpụga maka ịchaji.
Ihe eji ebu plastik ewepụtara na-enye ohere ijikwa ya na njem dị mma.
Ọrụ
Na-agbakwunye Ihe Nnwale
The Vibration exciter nke PCE-VC20 nwere oghere M5 tapped na 7 mm omimi maka mgbakwunye nke ngwaọrụ n'okpuru ule. Ihe nkwụnye stud na ihe nkwụnye ihe ma ọ bụ clamping magnet nwere ike iji maka arịọnụ.
Elu nke ihe na-eme mkpọtụ emewo ka ọ na-eguzogide oke site na nitride coasting plasma. Maka ndị ntụgharị ọkụ, enwere ike iji wax nrapado ma ọ bụ teepu nrapado nwere akụkụ abụọ maka ịkwanye. Enwere ike nweta elu dị larịị maka nkwụnye nrapado site na iji M5 insulating flange Model 029 nke dị na Metra. Mgbakwụnye magnetik na nrapado ka a na-anabata naanị maka nhazi nlegharị anya echere. A na-ekwe nkwa izi ezi naanị maka mgbakwunye skru. Mgbe ị na-ebugo ihe atụ ahụ, ṅaa ntị na nkesa symmetrical nke ibu ihe ahụ. Ma ọ bụghị ya, sistemụ na-ama jijiji nwere ike ịpụpụ site na axis ya. Mgbe ị na-eji usoro njikọ maka nhazi nke transducers, mgbakwunye symmetrical na-adị mkpa karịsịa, dịka ọmụmaatụ, na nhazi nke axis x na y nke triaxial accelerometer. N'okwu ahụ, a na-atụ aro iji nha nha nha dị ka egosiri na ihe atụ na-esonụ.
Biko mara na ekwesịrị ịkwado eriri njikọ dị arọ n'akụkụ ihe nnwale ahụ. Agbanyeghị, a ga-ezere ngwa ike site na eriri. A gaghị agafe oke oke ike nke 1 ruo 2 Nm na ihe na-ama jijiji ebe ọ bụ na nke a nwere ike imebi ngwá ọrụ ahụ. Ekwesịrị idowe PCE-VC20 n'elu ala siri ike. A naghị atụ aro ịrụ ọrụ ejiri aka n'ihi njehie enwere ike.
nhazi nhazi
Mgbe itinye ngwaọrụ n'okpuru ule, gbanwee PCE-VC20 na site na ịpị bọtịnụ "Gbanye / Gbanyụọ" ruo mgbe ngosi ọkụ. A na-egosipụta ozi ngwaọrụ, dị ka ngwaike na ụdị ngwanrọ na ụbọchị nke mmezi ikpeazụ, maka sekọnd ole na ole. Mgbe obere oge gachara, mgbama ịma jijiji na-eguzosi ike. Ngosipụta na-egosi ụkpụrụ nke ugboro ịma jijiji na ịdị ukwuu (ọgụgụ 2). Biko mara na ihe ndị a abụghị uru a na-atụ kama ọ bụ naanị ụkpụrụ nkịtị. 
N'akụkụ aka nri elu ị ga-ahụ izi ezi nke oke ịma jijiji na pasentị. Mgbe obere oge gasịrị, uru pasentị kwesịrị ịgbakọ na efu. Ọ bụrụ na njehie zuru oke gafere 3%, uru pasentị ga-agbanwe gaa na mkpụrụedemede na-agbanwe agbanwe, a ga-ewepụta ụda bepụ. N'okwu a enweghị ike ịme nhazi. Mgbe oke kachasị nke ihe nlele ahụ gafere, kama uru pasentị, ozi njehie "OVERL" ga-apụta ma gbanyụọ shaker. Iji gaa n'ihu na nhazigharị, buru ụzọ gbanyụọ calibrator. Mgbe ahụ belata ịdị arọ nke ihe nlele wee gbanye calibrator azụ. Ibu a na-anabata bụ ihe ruru gram 500, dabere na ugboro ole ahọpụtara. Enwere ike ikpochapụ ozi oke ibu site n'iwetu oke ịma jijiji. N'ahịrị ngosi dị ala, a ga-egosipụta ụbọchị nhazi ikpeazụ nke PCE-VC20 gị. Enwere ike gbanwee ntinye a naanị n'oge nhazi ụlọ mmepụta ihe. Biko gụọkwa akụkụ nke 5 maka nkọwa gbasara nhazigharị. Enwere ike ịgbanyụ PCE-VC20 site na ịpị igodo “ON/ Gbanyụọ” opekata mpe otu sekọnd. Ọ bụrụ na ewepụrụ nke a, a na-ewepụta oge nke na-agbanyụ calibrator ka nkeji iri gachara. Akpachara anya: Agaghị eji igwe na-eme mkpọtụ na gburugburu unyi na uzuzu. Ekwesịrị ịkpachara anya ka ọ ghara irighiri irighiri ferromagnetic banye n'ime ngwa: Ha nwere ike mebie ya n'ime obere oge. Akwụkwọ ikike anaghị ekpuchi ntụpọ n'ihi unyi na uzuzu.
© Ngwa PCE
Na-agbanwe Accumulator
Ihe ngosi batrị dị na akuku aka ekpe elu nke ngosi. A na-egosiputa bargraph zuru ezu mgbe batrị chajịchara. Ọbụlagodi na bargraph ahụ tọgbọ chakoo, a ka nwere ike iji ngwa n'ime nkọwapụta ya ruo oge ụfọdụ. Mgbe batrị voltage dara n'okpuru uru dị oke egwu, PCE-VC20 na-agbanyụ ya na-akpaghị aka. Ejiri akụrụngwa NiMH na-enye ike maka ihe dịka awa 5 nke ịrụ ọrụ. Iji chajịa batrị, jikọọ ihe nkwụnye ọkụ mains (15 VDC) na oghere DIN dị n'akụkụ akpa ahụ. Ọkachamma ka agbanyụọ otu ahụ n'oge ịchaji. Nchaji ga-ewe ihe dịka awa 3. N'oge usoro ịchaji ihe ngosi batrị ga-aga n'ihu na-aga n'ihu (Foto 3).
N'oge usoro ịchaji, enwere ike iji PCE-VC20 mee nhazi. Agbanyeghị, nke a ga-agbatị oge nchaji dị mkpa. Ekwesịrị ịgbanwe ihe mkpokọ na ụlọ okpomọkụ. N'ebe okpomọkụ dị elu enwere ike ịkwụsị ịchaji tupu iru eru zuru oke n'ihi ihe nrụnye okpomọkụ batrị ahụ enweghị mmetụta ebe nchekwa. Enwere ike ịchaji obere akụkụ. A naghị atụ aro njikọ na-adịgide adịgide nke ihe nkwụnye ọkụ. Nke a nwere ike ibute batrị akaghi aka. Ka ịzenarị chajị batrị karịrị akarị, a naghị atụ aro ka ị kwụpụ wee jikọọ ihe nkwụnye ọkụ ọzọ ozugbo chajachara. Mgbe unit anaghị arụ ọrụ, batrị kwesịrị ịchaji opekata mpe otu ugboro n'afọ. Batrị arụnyere enweghị nrụzi. Dị ka ndị na-akpakọba ihe niile ọ nwere obere okirikiri chaja. Ọ bụrụ na oge ọrụ na batrị chajịrị zuru ezu ezughi oke, ekwesịrị dochie batrị ahụ. N'okwu a, calibrator kwesịrị iweghachite onye nrụpụta ga-abụkwa izi ezi nke calibrator.
Tọgharia
N'ọ bụrụ na ọ gaghị ekwe omume na enweghị ike ịgbanye PCE-VC20 gị site na igodo "Gbanye / gbanyụọ", ọ nwere ike ịdị mkpa ịpị bọtịnụ Tọgharia. A na-ahụ bọtịnụ a n'akụkụ ala nke ikpe dị nso na igodo igodo. Jiri ihe dị mkpa na-abụghị ọla, dị ka ncha eze, ka ịpịa bọtịnụ dị n'ime oghere ahụ. Nke a ga-amalite ngwá ọrụ. Ịpị bọtịnụ Tọgharia enweghị mmetụta na izi ezi.
nhazi nhazi
Njirimara ịma jijiji nke PCE-VC20 kwụsiri ike ọbụlagodi mgbe ejiri ya kpụ ọkụ n'ọnụ. Mgbanwe a na-ahụkarị dị n'okpuru 1% kwa afọ. Anyị na-akwado mmezigharị kwa afọ. N'ihe banyere ibu ujo, idobe ngwá ọrụ, wdg. ka a na-adụ ọdụ imegharị ozugbo.
Kpọtụrụ
Ọ bụrụ na ị nwere ajụjụ ọ bụla, aro ma ọ bụ nsogbu teknụzụ, biko egbula ịkpọtụrụ anyị. Ị ga-ahụ ozi kọntaktị dị mkpa na njedebe nke akwụkwọ ntuziaka onye ọrụ a.
mkpofu
Maka mkpofu batrị na EU, ntuziaka 2006/66/EC nke nzuko omeiwu Europe na-emetụta. N'ihi mmetọ ndị dị n'ime ya, a gaghị atụfu batrị ka ọ bụrụ ihe mkpofu ụlọ. A ga-enyerịrị ha na ebe nchịkọta e mere maka nzube ahụ. Iji soro ntuziaka EU 2012/19/EU anyị na-eweghachi ngwaọrụ anyị azụ. Anyị na-eji ha ọzọ ma ọ bụ nye ha ụlọ ọrụ na-ekpochapụ ngwaọrụ ndị ahụ dịka iwu kwadoro. Maka mba ndị na-abụghị EU, batrị na ngwaọrụ kwesịrị ịtụfu dịka iwu mkpofu mpaghara gị siri dị. Ọ bụrụ na ị nwere ajụjụ ọ bụla, biko kpọtụrụ PCE Instruments.
United States of America
PCE Americas Inc. 711 Commerce Way suite 8 Jupiter / Palm Beach 33458 FL USA
Germany
Ụlọ ọrụ PCE Deutschland GmbH
Aha m Langel 4
D-59872 Meschede
Deutschland
Tel.: +49 (0) 2903 976 99 0
Faksị: + 49 (0) 2903 976 99 29
info@pce-instruments.com
www.pce-instruments.com/deutsch
United States of America
Ụlọ ọrụ PCE Americas Inc.
711 Commerce Way suite 8 Jupiter / Palm Beach
33458fl
USA
Tel: +1 561-320-9162
Fax: +1 561-320-9176
info@pce-americas.com
www.pce-instruments.com/us
Mba netherland
Ụlọ ọrụ PCE Brookhuis BV
Institutenweg 15
7521 PH
Nederland
Ekwentị: +31 (0) 900 1200 003 Fax: +31 53 430 36 46
info@pcebenelux.nl
www.pce-instruments.com/dutch
China
PCE (Beijing) Technology Co., Ltd 1519 Ime ụlọ, 4 Ụlọ
Men Tou Gou Xin Cheng,
Men Tou Gou District
102300 Beijing
China
Tel: +86 (10) 8893 9660
info@pce-instruments.cn
www.pce-instruments.cn
France
Ngwa PCE France EURL
23, rue de Strasbourg
67250 SOULTZ-SOUS-FORETS France
Ekwentị: +33 (0) 972 3537 17 Nọmba de fax: +33 (0) 972 3537 18
info@pce-france.fr
www.pce-instruments.com/french
United Kingdom
Ụgwọ nke ụlọ ọrụ PCE Instruments UK Ltd
Nkeji 12/13 Southpoint Business Park Ensign Way, Southampton Hampshire
United Kingdom, SO31 4RF
Tel: +44 (0) 2380 98703 0
Faksị: +44 (0) 2380 98703 9
info@industrial-needs.com
www.pce-instruments.com/english
Chile
Ụgwọ nke ụlọ ọrụ PCE Instruments Chile SA
RUT: 76.154.057-2
Santos Dumont 738, obodo 4 Comuna de Recoleta, Santiago, Chile Tel. : +56 2 24053238
Fax: +56 2 2873 3777
info@pce-instruments.cl
www.pce-instruments.com/chile
toro toro
Ụlọ ọrụ PCE Teknik Cihazları Ltd.
Halkalı Merkez Mah.
Pehlivan Sok. Nọmba 6/C
34303 Küçükçekmece – İstanbul Türkiye
Tel: 0212 471 11 47
Ozi: 0212 705 53 93
info@pce-cihazlari.com.tr
www.pce-instruments.com/turkish
Spain
PCE Ibérica SL
Calle Mayor, 53
02500 Tobarra (Albacete) España
Tel. : +34 967 543 548
Fax: +34 967 543 542
info@pce-iberica.es
www.pce-instruments.com/espanol
Ịtali
PCE Italia srl
Site na Pesciatina 878 / B-Interno 6 55010 LOC. GRAGNANO CAPANNORI (LUCCA)
Ịtali
Ekwentị: +39 0583 975 114
Fax: +39 0583 974 824
info@pce-italia.it
www.pce-instruments.com/italiano
Hong Kong
Ụgwọ nke ụlọ ọrụ PCE Instruments HK Ltd.
Nkeji J, 21/F., COS Center
56 Tsun Yip Street
Kwun Tong
Kowloon, Họng Kọng
Tel: +852-301-84912
jyi@pce-instruments.com
www.pce-instruments.cn
Akwụkwọ / akụrụngwa
 |
Ngwa PCE PCE-VC 20 Usoro Calibrator na-eme mkpọtụ [pdf] Ntuziaka PCE-VC 20 Usoro Calibrator Usoro Vibration, PCE-VC 20, Ihe Nrụgide Usoro Vibrator, Onye Nhazi usoro, Calibrator |
