MULTIBRACKETS 5605 Wall Bracket
Nkọwapụta
- Ngwaahịa: MULTIBRACKETS 5605 Universal Wall Bracket / Long Reach Arm Mount
- Ụdị: Full-motion articulating TV wall mount (dual arm long-reach swivel)
- Agba: Black metal imecha
- Ihe: Heavy-duty solid steel construction
- Screen Compatibility: Fits most flat-panel TVs 65″ – 110″ diagonal
- Max screen diagonal: ~279 cm (110″)
- Ike ibu: Up to 125 kg (~275 lbs) load support
- Nkwado VESA: Compatible with most VESA patterns from 100×100 mm up to 800×600 mm
- Movement & Adjustment: Full-motion swivel, tilt, and rotate at multiple pivot points
- Oke tit: approx. -5° to +10°
- Swivel/rotation: approximately 60° to +60°
- Extension from wall: up to 980 mm (~38.6″)
- Atụmatụ:
- Dual long-reach arms for flexible viewọnọdụ ọnọdụ
- Smart cable management system to hide cables
- Partially pre-assembled with a full hardware kit included
- Ụdị nwụnye: Wall mount, articulating bracket
- Agba: Nwa
Ọ dị mkpa!
Your Plasma. LCD. TV, Projector, Projector Screen, or other HiFi equipment represents a considerable value.
If screws are Included they may not be suitable for the material of your wall, ceiling, or floor. Replace the screws with suitable ones if needed.
In case you are unsure regarding any aspects or the mounting of this product,t please
Kpọtụrụ onye ọkachamara.
Ịdọ aka ná ntị!
Mgbe niile lelee nke omimi of nke oghere mbụ ibido an echichi.
Fits most 65″-110″ flat panel TV
- Weight capacity: 125kg/275 lbs
- VESA compliance: 100×100 200×200 300×300 400×200 400×400 600×400 800×600
Ịdọ aka ná ntị
mmerụ ahụ siri ike nke onwe na mmebi ihe onwunwe nwere ike ịpụta site na nrụnye ma ọ bụ mgbakọ na-ekwesịghị ekwesị. Gụọ ịdọ aka ná ntị na-esonụ nke ọma tupu ịmalite.
- Ndị ọkachamara ga-etinyerịrị ngwaahịa.
- Ọ bụrụ na ị ghọtaghị ntuziaka a ma ọ bụ nwee nchegbu ma ọ bụ ajụjụ ọ bụla, biko kpọtụrụ onye nrụnye mpaghara tozuru etozu.
- Awụnyela ma ọ bụ kpokọta ma ọ bụrụ na ngwaahịa ma ọ bụ ngwaike mebiri ma ọ bụ na-efu. Ọ bụrụ na ịchọrọ akụkụ ngbanwe, biko kpọtụrụ onye nkesa mpaghara maka enyemaka.
- This product fits most65″-11D”LCD and plasma screens; maximum weight of LCD /plasma screen: 125kg.
- This product has been designed for use on masonry (solid concrete, 2000 PSI density minimum).
- For safe installation. The wall you are mounting to must support a minimum of 3 times the weight of the total load (the mount, the TV, and all accessories).
- Ejila ngwaahịa a maka ngwa ọzọ karịa ka emebere ya na mbụ.
- This product contains moving parts; please use it with caution.
- When installing a flat panel display, please do not damage the electrical wiring or the power source.
- Onye nrụpụta agaghị ebu ọrụ ọ bụla maka ịgbagoro na mgbidi kwụ ọtọ, ma ọ bụ mmebi mberede ma ọ bụ nke ga-esi na ya pụta.
- Onye nrụpụta ahụ na-ekwupụta ụgwọ ọ bụla maka mgbanwe, nrụnye na-ezighi ezi, ma ọ bụ nwụnye karịa oke arọ akọwapụtara.
- The manufacturer will not be liable for any damages arising out of the use of, or inabilityto use, the product.
Ndepụta gara aga
Ịwụnye
INSTALLATION OPTION 1: Wood Stud Installation (Suitable for 16″ or 24″ apart studs)
- Use a stud finder to locate the drywall studs and mark the desired installation locations with a pencil.
- Gbakwunye Template Plate Wall (BB) na mgbidi na ebe nrụnye achọrọ.
- Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt locations in the middle of the studs.
- Use a 7/32″ (5.5mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm).
Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.
Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers (H).
IHE: Do not use Wall Anchor (I) for wood stud installation.
Nhọrọ 2: Nrụnye mgbidi Concrete/Brick
- Gbakwunye Template Plate Wall (BB) na mgbidi na ebe nrụnye achọrọ.
- Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall.
- Use a 3/8″ (10 mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm). Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.
Fanye 6 x Arịlịka Mgbidi (I) n'ime oghere. Chekwaa Plate Wall na mgbidi na 6 x Lag Bolts (H) na 6 x Washers (H).
This full motion TV wall mount comes with a sliding mechanism that allows the arms and the TV to slide horizontally left or right for up to 15. 7 inches, while the wall plate is stationary on the wall. This feature allows the TV to be placed at an optimal position, regardless of the position of the wall studs. The mount will ship with the locking bars installed in place at their center position. If the sliding function will be used, take off the locking plates by removing the bolts that hold them in place.
Place the top locking bar at the desired position to fix the left slide limit of the arms, and place the bottom bar at the desired position to fix the right side limit of the arms. The raised metal piece at the end of the locking bars limits the slide of the arms. Ensure the locking bars are oriented correctly to ensure both the left and right side locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking bar’s position to prevent the arms from sliding off the wall plate.
Ịdọ aka ná ntị: FAILURE TO INSTALL THE LOCKING BARS ADEQUATELY MAY RESULT IN THE ARMS AND THE TV FROM SLIDING OFF THE WALL PLATE.
Attaching the TV to the Mount (For Displays With Smaller Bolt Hole Patterns)
For TVs with smaller bolt hole patterns of VESA 100×100, 100×200, 200×100, and 200x200mm, the TV can be mounted directly on the plate, without the extension bars.
Ịgbakwunye TV n'Ugwu (N'ihi na Ngosipụta na nnukwu Bolt Hole Patterns) Maka TV nwere nnukwu oghere oghere nke VESA 300 × 300,400 × 200,400 × 400,600 × 400, 800 × 600 mm, jiri brackets TV na ogwe ndọtị iji wụnye ya. TV na n'elu.
Attach the 2 x TV Brackets to the back of the TV by using screws A+E, B+E, C+E, or Dor G.
IHE: The hardware packet provided fits most TVs in the market. If your TV requires different hardware, please contact us at mount-it.com to procure additional hardware kits.
Ensure the screws are adequately engaged with the screw holes on the TV.
Do not overtighten the screws. Ensure the TV brackets sit flat with the back of the T.V.
Hangina g TV On The Wall Mount Arms
Lift the TV (two persons recommended) and hang the TV brackets onto the wall mount extension bars.
Chekwaa TV n'elu Ugwu
Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F Screws as shown ointhe image.
IHE: Ọ bụrụ na ejiri AA Safety Brackets chekwaa brackets TV na ugwu nwere ike bute ebuli TV na mberede site na ogwe ndọtị, ikekwe bute mmebi anụ ahụ ma ọ bụ ihe onwunwe.
Ndozi ọkwa -5° – +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To adjust the level of the TV, place a bubble level on top of the TV, loosen the 2 x G bolts located behind the VESA plate, level the TV, and tighten the 2 x G bolts to lock the TV in position.
Ndozi ntụgharị -5° - +10°
The mount can tilt down up to 10 degrees and up 5 degrees. To adjust the tilt angle of the TV, pull out the tilt adjustment levers on both sides of the mount and turn counterclockwise to loosen the screws. Adjust the tilt to the desired angle and turn the tilt adjustment lever clockwise to tighten the screws.
IHE: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT ADJUSTMENT LEVER TIGHTNESS AND TIGHTEN IF NECESSARY.
Jiri obere mkpachị njikwa USB agbakwunyere na ogwe aka iji duru eriri gaa n'azụ ma ọ bụ n'akụkụ TV.
Akụkụ
Kaadị akwụkwọ ikike
MULTIBRAKETS “™ Oke Akwụkwọ ikike
Multibrackets akwụkwọ ikike ya ngwaahịa ka be n'efu of ntụpọ in ihe na arụ ọrụ maka nke ngwaahịa Akwụkwọ ikike Oge.
Nke Akwụkwọ ikike oge na-amalite on nke mbụ zuo ụbọchị of nke ngwaahịa
Ha niile Multibrackets ngwaahịa bụ kpuchie by a oke ngwaahịa akwụkwọ ikike
- Ise (5) afọ maka igwe vidiyo nyochaa mounts, niile racksna non-electrical ogbe ngwa
- ABỤỌ (2) afọ maka gaslifts na sit-stand ụlọ ọrụ
- OTU (1) afọ maka niile moto eji eme ihe na/ma ọ bụ akpaghị aka ngwaahịa, rọba ọkà okwu mounts, niile ọkà okwu stands, niile ngwá ụlọ, niileosisi (MDF) ngwa
Maka akwụkwọ ikike na-ekwu mere n'oge nke Akwụkwọ ikike Oge, ỌTỤTỤEGO ga-eme dochie nke ọ bụla adịghị mma ngwaahịa akụkụ n'efu of charge. Should a akụkụ on nke gị Multibrackets ngwaahịa fail, Biko mepụta anRMA ikpe on www.multibrackets.com/support ka mee a akwụkwọ ikikeMgbarakwa. We ga-eme await nke gị akwụkwọ na mgbe ahụ discuss nkensogbu ya na gi, na otu ugboro we confirm nke ngwaahịa is n'okpuru agharanty, we ga-eme ụgbọ mmiri nnọchi akụkụ ka ị. Nke a Oke Akwụkwọ ikikeeme ọ bụghị mkpuchi nke akwụ ụgwọ of wepụ na dochie adịghị mma akụkụsi nke gị Multibrackets ngwaahịa. Yabụ, if nke gị nsogbu chọrọ arụkwaa technician, ị aghaghi kwụọ ụgwọ nke ọ bụla arụ ọrụ ebubo.
For warranty claims made during the Warranty Period, MULTI BRACKETS will replace any defective product part free of charge. Should a part of your Multibrackets product fail, please create an RMA case on www.multibrackets.com/support to make a warranty claim. We will await your documentation and then discuss the problem with you, and once we confirm the product is under warranty, we will ship replacement parts to you. This
Limited Warranty does not cover the costs of removing and replacing defective parts from your Multibrackets product. So, if your problem requires arepair technician, you must pay any labor charg.es This Limited Warranty extends only to the original purchaser of the product and is automatically void if your Multibrackets product is modified in any way, improperly installed, taxed beyond its stated weight capacity, or otherwise misused or abused.
All Multibrackets products are intended for indoor use only, and any outdoor use voids this Limited Warranty. The Limited Warranty for wall and ceiling mounts is void if the mount is moved from its initial installation. To the maximum extent permitted by applicable law, Multibrackets disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Multibrackets will not be liable for any damages whatsoever arising out of the use or inability to use itsproducts, even if Multibrackets has been advised of the possibility of such damages. To the maximum extent permitted by applicablelaw, Multibrackets disclaims any responsibility for incidental or consequential damages,
Multibrackets M Stockholm, Sweden 2016. www.multibrackets.com
The content of this manual is subject to Change wltheut further notice. The latest vers, on of this manual can be found online under the product name on the websaịtị: www.magaara.com
Akwụkwọ / akụrụngwa
 |
MULTIBRACKETS 5605 Wall Bracket [pdf] Ntuziaka nwụnye 5605 Wall Bracket, 5605, Wall Bracket, Wall Bracket, Wall, Bracket |