MiDiPLUS logoMiDiPLUS TINY Series Mini kiiboodu njikwa - akara 1TINY Series Obere ahụigodo njikwa
Akwụkwọ ntuziaka onye ọrụMiDiPLUS TINY Series Obere ahụigodo njikwausoro
Akwụkwọ ntuziaka onye ọrụ

ọdịnaya zoo
1 Okwu mmalite
2 Ihe ndetu ndị dị mkpa:
3 gafereview
4 Nduzi
5 Ntọala DAW
6 Ihe odide ntụkwasị
7 Akwụkwọ / akụrụngwa
7.1 Ntụaka
8 Ozi ndị metụtara

Okwu mmalite

Daalụ maka ịzụrụ MIDIPLUS TINY usoro kiiboodu MIDI, Ha dị na ụdị abụọ: Basic and Controller Editions. Igodo 32 MIDI ahụ nwere mmetụta ọsọ ọsọ, joystick na njikwa njem, enwere ike ịhazi ya site na MIDIPLUS Control Center, nke enwere ike ịhazi ya. ebudatara na MIDIPLUS websaịtị. Biko gụọ akwụkwọ ntuziaka a tupu ịmalite iji, iji nyere gị aka ịghọta ngwa ngwa arụ ọrụ na njirimara nke ahụigodo MIDI usoro TINY.
ngwugwu gụnyere:

  • Obere ahụigodo MIDI usoro
  • eriri USB
  • Akwụkwọ ndebanye aha Cubase LE
  • MIDIPLUS Pasters

Ihe ndetu ndị dị mkpa:

  1. Biko jiri akwa kpọrọ nkụ na nke dị nro hichaa ahụigodo TINY usoro MIDI mgbe ị na-ehicha ya. Ejila ihe na-agba agba, ihe mgbaze organic, ihe ncha ma ọ bụ ihe nhicha ndị ọzọ etinyere na kemịkalụ ike ka ị ghara igbanwe agba nke panel ma ọ bụ ahụigodo.
  2. Biko wepụ eriri USB wee gbanyụọ TINY usoro MIDI ahụigodo mgbe agaghị eji ahụigodo ogologo oge ma ọ bụ n'oge égbè eluigwe.
  3. Zere iji usoro ahụigodo MIDI TINY nso nso mmiri ma ọ bụ ebe mmiri, dị ka ebe ịsa ahụ, ọdọ mmiri, ma ọ bụ ebe ndị yiri ya.
  4. Biko etinyela ahụigodo MIDI usoro TINY n'ebe anaghị akwụsi ike ka ịzenarị ọdịda mberede.
  5. Biko etinyela ihe dị arọ na ahụigodo TINY usoro MIDI.
  6. Biko zere idowe ahụigodo MIDI usoro TINY na mgbasa ikuku adịghị mma.
  7. Biko emeghela n'ime usoro TINY kiiboodu MIDI, zere ọdịda ọla ọ bụla nwere ike ịkpata ọkụ ma ọ bụ ujo eletrik.
  8. Zere iji ahụigodo MIDI usoro TINY ma ọ bụrụ na égbè eluigwe ma ọ bụ àmụmà dị
  9.  Biko ekpughela ahụigodo MIDI usoro TINY na scorchingsun
  10. Biko ejikwala ahụigodo MIDI usoro TINY mgbe enwere ntapu gas dị nso.

gafereview

1.1 Panel kacha elu   MiDiPLUS TINY Series Obere ahụigodo njikwa - gafereview 1Mbipụta nke bụ isi:

  1. Pitch na Modulation joystick: Jikwaa ụda ụda gị na ụda ụda.
  2. SHIFT: Mee ka njikwa semitone rụọ ọrụ ma ọ bụ njikwa.
  3. Ụgbọ njem: na-enye ụdịdị MMC, na-ejikwa ụgbọ njem DAW gị.
  4. Transpose na Octave: Mee ka njikwa semitone nke ahụigodo rụọ ọrụ na njikwa octave.
  5. CHORD: Mee ka ọnọdụ Chord ahụ rụọ ọrụ.
  6. SUSTAIN: Tinye SUSTAIN ahụigodo rụọ ọrụ.
  7. Ahụigodo: kpalite ndetu agbanwu ma ọ bụ gbanyụọ.
    Mbipụta njikwa:
  8. Knobs: Njikwa DAW na parampat ngwa ngwa.
  9. Mpempe akwụkwọ: Trigger channel 10 ngwa ndetu.

1.2 Ogwe NzuzoMiDiPLUS TINY Series Obere ahụigodo njikwa - Ogwe azụ

  1. SUSTAIN: Jikọọ na pedal SUSTAIN.
  2. USB: Jikọọ na kọmputa gị, ọdụ ụgbọ mmiri a na-enye ma ike yana data MIDI.
  3. MIDI apụọ: Na-eziga data MIDI na ngwaọrụ MIDI mpụga.

Nduzi

2.1 Dị njikere ijiMiDiPLUS TINY Series Mini Keyboard Controller - Ogwe azụ 1Jiri kọmputa mee ihe: Jikọọ ahụigodo MIDI usoro TINY na kọmputa gị site na iji eriri USB gụnyere. Igodo ahụ obere usoro MIDI bụ ngwaọrụ USB na-akwado klaasị, yabụ a na-etinye ndị ọkwọ ụgbọ ala ya na-akpaghị aka mgbe ị na-ejikọ na kọmpụta. MiDiPLUS TINY Series Mini Keyboard Controller - Ogwe azụ 2Jiri igwe ụda usoro miniEngine MIDIPLUS mee ihe: Jikọọ bọtịnụ TINY usoro MIDI na USB Host of miniEngine site na iji eriri USB gụnyere, jide bọtịnụ ike ka ịgbanwuo ike. jikọọ ọkà okwu ma ọ bụ ekweisi gị na miniEngine wee gbanye miniEngine. MiDiPLUS TINY Series Mini Keyboard Controller - Ogwe azụ 3Jiri ngwaọrụ MIDI mpụga: Jikọọ na ihe nkwụnye ọkụ USB 5V site na iji eriri USB agụnyere, jikọọ MIDI OUT nke TINY usoro MIDI ahụ na MIDI IN nke ngwaọrụ MIDI mpụga na iji eriri MIDI 5 pin.
2.2 Pitch na Modulation joystickMiDiPLUS TINY Series Mini kiiboodu njikwa - fig 1Ọ joystick nke TINY usoro MIDI kiiboodu na-enye ohere maka ezigbo oge Pitch bend na njikwa modulation.
Ịmafe aka ekpe ma ọ bụ aka nri na osisi ọ joyụ ga-ebuli ma ọ bụ wetuo ọkwa nke ụda ahọpụtara. Edebere nso nso a n'ime ngwaike ma ọ bụ ngwa ngwanrọ na-achịkwa.
Ịwụ elu ma ọ bụ ala na joystick na-abawanye ọnụọgụ mgbanwe na ụda ahọpụtara. Nzaghachi na-adabere na ntọala nke ngwá ọrụ a na-achịkwa. Ụfọdụ ngwá ọrụ ma ọ bụ ihe atọrọ n'ọrụ agaghị eji oke ngbanwe.
Na MIDIPLUS Control Center, ị nwere ike ịkọwapụta ụda ụda dị ka nọmba CC (nso CC0-CC128) na ọwa MIDI (nso 0-16) ị nwere ike ịkọwa njikwa modulation dị ka nọmba CC (oke CC0-CC127) na ọwa MIDI (oke 0-16).
2.3 SHIFTMiDiPLUS TINY Series Mini kiiboodu njikwa - fig 2Jituo bọtịnụ SHIFT ka ịnweta ọrụ ntụgharị wee gbanwee Pad Banks.
2.4 Octave na Transpose
MiDiPLUS TINY Series Mini kiiboodu njikwa - fig 3Octave: Pịa bọtịnụ < ma ọ bụ > ka ọ gbanwee octave nso nke kiiboodu, mgbe arụ ọrụ ya, bọtịnụ octave ahọpụtara ga-enwu enwu, Ugboro blink na-agbanwe na Octave.
Nyefee: Pịa ma jide bọtịnụ SHIFT, wee pịa bọtịnụ < ma ọ bụ > ka ị gbanwee, mgbe arụ ọrụ ya, bọtịnụ SHIFT ga-enwu.
2.5 Usoro egwuMiDiPLUS TINY Series Mini kiiboodu njikwa - fig 4Iji mee ka ọnọdụ Chord rụọ ọrụ, naanị jituo bọtịnụ CHORD, wee kpọọ Chord nke masịrị gị (kacha nke ndetu iri) na ahụigodo ka ọ gbanyechara. Ozugbo ị wepụtara bọtịnụ CHORD, enwere ike ịkpọ Chord a site na ịpị naanị otu ndetu. A na-ewere ndetu kacha ala nke Chord ahọpụtara ka ọ bụ ndetu ala, a ga-atụgharị ya na ndetu ọhụrụ ọ bụla ị na-egwu. Pịa bọtịnụ CHORD ọzọ ka gbanyụọ ọnọdụ Chord.
2.6 NKWUKWUMiDiPLUS TINY Series Mini kiiboodu njikwa - fig 5Mee ka bọtịnụ SUSTAIN rụọ ọrụ ga-agbakwunye mmetụta SUSTAIN na keyboard, ọ nwere ọnọdụ ọrụ 2:

  1. Pịa SUSTAIN otu ugboro ka ọ rụọ ọrụ SUSTAIN, pịa ọzọ ka gbanyụọ ọrụ.
  2. Jidetu SUSTAIN ka ọ rụọ ọrụ SUSTAIN, hapụ ka gbanyụọ.

2.7 Transportgbọ njemMiDiPLUS TINY Series Mini kiiboodu njikwa - fig 6Bọtịnụ mbufe atọ nke ahụigodo TINY usoro MIDI dị na ọnọdụ MMC, nke na-anọchi anya Play, Kwụsị, na ndekọ.
Na MIDIPLUS Control Center, bọtịnụ Ụgbọ njem nwere ọnọdụ MMC na ọnọdụ CC.
Na ọnọdụ MMC, ị nwere ike hazie ọnọdụ nke bọtịnụ Transport: Kwụsị, Gwuo, Ọsọ ọsọ, Weghachite na Dekọọ;
Na ọnọdụ CC, ị nwere ike hazie nọmba CC (oke CC0-CC127), ọwa MIDI (oke 0-16) na ọnọdụ (Ọnụ Ụzọ Ámá/Toggle).
2.8 Knobs (TINY+)MiDiPLUS TINY Series Mini kiiboodu njikwa - fig 7TINY seires MIDI kiiboodu nwere 4 knobs, MIDI CC# ndabara nke knobs dị ka n'okpuru:

Norọ MIDI CC# (nke ndabara)
K1 CC#93
K2 CC#91
K3 CC#71
K4 CC#74

Na MIDIPLUS Control Center, ị nwere ike hazie nọmba CC (oke CC0-CC127) na ọwa MIDI (oke 0-16) nke K1-K4 n'otu n'otu.
2.9 mpe mpe akwa (TINY +) MiDiPLUS TINY Series Mini kiiboodu njikwa - fig 8TINY + atụmatụ 4 pads mmetụta ọsọ ọsọ na-anọchi anya Pad Banks dị iche iche, 4 Pad Banks nwere ike ịgbanwe site na ịpị SHIFT na Pads, ha nwere ike izipu ndetu dị iche iche. Ihe ndetu nke 4 Pad Banks dị ka n'okpuru:

LỌ A Bank B Ụlọ akụ C BANK D
Mpempe akwụkwọ 1=36 Mpempe akwụkwọ 1=40 Mpempe akwụkwọ 1=44 Mpempe akwụkwọ 1=48
 Mpempe akwụkwọ 2=37  Mpempe akwụkwọ 2=41 Mpempe akwụkwọ 2=45 Mpempe akwụkwọ 2=49
Mpempe akwụkwọ 3=38 Mpempe akwụkwọ 3=42 Mpempe akwụkwọ 3=46 Mpempe akwụkwọ 3=50
Mpempe akwụkwọ 4=39 Mpempe akwụkwọ 4=43 Mpempe akwụkwọ 4=47 Mpempe akwụkwọ 4=51

N'ime MIDIPLUS Control Center, PAD nwere ọnọdụ NOTE na ọnọdụ CC.
Na ọnọdụ NOTE, ị nwere ike hazie ndetu (oke 0-127) na ọwa MIDI (oke 0-16) maka Pad.
Na ọnọdụ CC, ị nwere ike hazie nọmba CC (nso 0-127), ọwa MIDI (oke 0-16), yana ụdị pad iku ume (Ọnụ Ụzọ Ámá/Toggle).

Ntọala DAW

3.1 Steinberg Cubase/Nuendo Pro(MMC)

  1. Gaa na menu: Ụgbọ njem> Ntọala mmekọrịta ọrụ…MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 1
  2. Họrọ njikwa igwe wee mee ka MMC Slave Active, tọọ ntinye MIDI na MIDI ka ọ bụrụ akara ahụigodo TINY usoro MIDI, wee tọọ NJ ngwaọrụ MMC ka ọ bụrụ 116MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 2
  3. Pịa OK ka ịmechaa nhazi
    Mara: Cubase LE/AI/Elements anaghị akwado MMC.

3.2 FL Studio (MMC)

  1. Gaa na menu: Nhọrọ > Ntọala MIDI (ụzọ mkpirisi ahụigodo: F10)
    MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 3
  2. Na ntinye ntinye, chọta ma Kwado usoro ahụigodo MIDI usoro TINY, wee mechie windo ka ịmechaa nhazi
    MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 4

3.3 Studio One (MMC)

  1. Gaa na menu: Studio One > Nhọrọ…( Ụzọ mkpirisi ahụigodo: Ctrl+, )
    MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 5
  2. Họrọ Ngwaọrụ Mpụga
    MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 6
  3. Wee pịa Tinye…
    MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 7
  4. Họrọ ahụigodo ọhụrụ
    MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 8
  5. Tọọ ma nata site na zipu gaa na ahụigodo MIDI usoro TINY
    MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 9
  6. Pịa OK iji mechaa akụkụ aMiDiPLUS TINY Series Obere kiiboodu - akara ngosi 1* Nzọụkwụ 7 na 8 metụtara Studio One 3 na ụdị mbụ
  7. Pịa Tinye…
    MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 10
  8. Chọta ebe nchekwa PreSonus dị na listi wee họrọ MMC, tọọ ma Anata Site na Send To TINY usoro MIDI, wee pịa OK iji mechaa nhazi.
    MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 11* Nzọụkwụ 9 na 10 na-emetụta ụdị Studio One 4 na nke ọzọ
  9. Gaa na menu: Studio One > Nhọrọ…( Ụzọ mkpirisi ahụigodo: Ctrl+, )
    MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 12
  10. Họrọ nke di elu wee họrọ Mmekọrịta ahụ, mee ka mmekọrịta gaa na ngwaọrụ mpụga, tọọ njikwa igwe MIDI bụ obere ahụigodo MIDI usoro, wee pịa OK ka ịmechaa nhazi.MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 13

3.4 Ngwa Pro (MMC)

  1. Gaa na menu: Ntọala> Mgbakwunye…MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 14
  2. Na windo mmapụta, pịa taabụ Control Machine, chọta MIDI Machine Control Remote (Ohu) wee pịa ya, tọọ ID ka 116, wee mechie windo ka ịmechaa nhazi.MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 15

3.5 Logic Pro X (MMC)

  1. Gaa na menu: Mmasị> MIDI…MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 16
  2. Họrọ windo mmekọrịta, chọta MIDI sync Project Settings… wee pịa yaMiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 17
  3. Kwado ntinye Gee ntị na MIDI Machine Control (MMC), wee mechie mpio ka ịmechaa nhazi.MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 18

 3.6 Onye na-ewe ihe ubi (MMC)

  1. Gaa na menu: Nhọrọ > Mmasị… (ụzọ mkpirisi ahụigodo: Ctrl + P)MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 19
  2. Na mpio Mmasị, pịa taabụ Ngwaọrụ MIDI, chọta wee pịa aka nri na ahụigodo TINY usoro MIDI site na ndetu ngwaọrụ, họrọ Kwado ntinye na Kwado ntinye maka ozi njikwa, wee mechie mpio ka imechaa nhazi.MiDiPLUS TINY Series Obere ahụigodo njikwa - Ntọala 20

Ihe odide ntụkwasị

4.1 Nkọwapụta

Nlereanya Usoro TINY
Ahụigodo Ahụigodo ndetu 32 nwere mmetụta ọsọ
Polyphony kachasị elu 64
Bọtịnụ 1 SHIFT, 3 Ụgbọ njem, 2 Octave, 1 SUSTAIN, 1 CHORD
Knobs (TINY+) 4 Akpo
Pads (TINY+) 4 paịlị ọsọ nwere azụ azụ
Njikọ 1 USB Ụdị C, 1 MIDI pụta, 1 SUSTAIN
Akụkụ TINY: 390 x 133 x 40(mm) TINY+:390 x 133 x 46 (mm)
Nha ịbụ Obere: 0.56kg TINY +: 0.65kg

4.2 MIDI CC Ndepụta

Nọmba CC  Ebumnuche Nọmba CC  Ebumnuche
0 Bank Họrọ MSB 66 Gbanyụọ/ Gbanyụọ
1 Mgbanwe 67 Gbanyụọ/ gbanyụọ pedal dị nro
2 Ihe njikwa ume 68 Legato Footswitch
3 Enweghị nkọwa 69 Jide 2
4 Controlkwụ njikwa 70 Mgbanwe ụda
5 Oge Portamento 71 Ogo Timbre / Harmonic
6 Ntinye data MSB 72 Oge mwepụta
7 Isi Mpịakọta 73 Oge mbuso agha
8 Nhazi 74 Icha ọkụ
9 Enweghị nkọwa 75 ~ 79 Onye njikwa ụda 6 ~ 10
10 Pan 80 ~ 83 Onye njikwa ebumnuche izugbe 5 ~ 8
11 Njikwa nkwupụta 84 Njikwa Portamento
12 ~ 13 Onye njikwa mmetụta 1 ~ 2 85 ~ 90 Enweghị nkọwa
14 ~ 15 Enweghị nkọwa 91 Ọkwa izipu reverb
16 ~ 19 Onye njikwa ebumnuche izugbe 1 ~ 4 92 Mmetụta 2 Omimi
20 ~ 31 Enweghị nkọwa 93 Ọkwa izipu Chorus
32 Bank Họrọ LSB 94 Mmetụta 4 Omimi
33 Mgbanwe nke LSB 95 Mmetụta 5 Omimi
34 Onye na-ahụ maka iku ume LSB 96 Mmụba data
35 Enweghị nkọwa 97 Mbelata data
36 Onye njikwa ụkwụ LSB 98 NRPN LSB
37 Portamento LSB 99 NRPN MSB
38 Ntinye data LSB 100 Ọnụ ego RPN LSB
39 Isi Mpịakọta LSB 101 RPN MSB
40 Ọnụ ego LSB 102 ~ 119 Enweghị nkọwa
41 Enweghị nkọwa 120 Ihe niile dara
42 Ọnọdụ LSB 121 Tọgharịa ndị njikwa niile
43 Onye njikwa okwu LSB 122 Gbanyụọ/ gbanyụọ njikwa mpaghara
44 ~ 45 Onye njikwa mmetụta LSB 1 ~ 2 123 Edeturu niile
46 ~ 47 Enweghị nkọwa 124 Gbanyụọ Ọnọdụ Omni
48 ~ 51 Onye njikwa ebumnuche izugbe LSB 1 ~ 4 125 Ọnọdụ Omni Gbanụrụ
52 ~ 63 Enweghị nkọwa 126 Mono mode Gbanụrụ
64 Na-akwado 127 Ụdị Poly Gbanụrụ
65 Gbanyụọ/ Gbanyụọ Portamento

4.3 MIDI DIN ruo 3.5mm TRS nkwụnye
TINY seires MIDI kiiboodu nwere obere jakị 3.5mm MIDI OUT, ọ bụrụ na ịchọrọ ijikọ na ọkọlọtọ 5 pin MIDI IN, ịkwesịrị iji ihe nkwụnye 3.5mm TRS na MIDI DIN, biko mara na enwere ihe nkwụnye ụdị 3 a na-ahụkarị, jide n'aka na ị na-eji Ụdị A, nhazi MIDI-pin dị ka n'okpuru:MiDiPLUS TINY Series Mini Keyboard Controller - Ogwe azụ 4MIDI 4 (Isi mmalite) > mgbanaka TRS
MIDI 2 (ọta) > TRS Sleeve
MIDI 5 (Sink) > Ndụmọdụ TRS

MiDiPLUS logowww.midiplus.com

Akwụkwọ / akụrụngwa

MiDiPLUS TINY Series Obere ahụigodo njikwa [pdf] Akwụkwọ ntuziaka onye ọrụ
TINY Series Mini kiiboodu njikwa, TINY Series, Obere ihe njikwa ahụigodo, njikwa ahụigodo, njikwa

Ntụaka

Ozi ndị metụtara

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *