MICROCOM 900M Intercom ntuziaka ntuziaka

MICROCOM 900M Intercom Ntuziaka

Okwu mmalite

Anyị na Pliant Teknụzụ chọrọ ikele gị maka ịzụrụasing MicroCom 900M. MicroCom 900M is a compact, economical wireless intercom system that operates in the 900MHz frequency band to provide excellent range and performance. The system features small, lightweight beltpacks and provides excellent sound quality, ease-of-use, and long-life battery operation. In order to get the most out of your new MicroCom 900M, please take a few moments to read this manual completely so that you better understand the operation of this product. This document applies to models PMC-900M and PMC-900M-AN*. For questions not addressed in this manual, feel free to contact the Pliant Technologies Customer Support Department using the information on page 9.

NDỤMỌDỤ ngwaahịa

• Sistemụ otu ọwa akụ na ụba
• Dị mfe iji rụọ ọrụ
• Ruo ndị ọrụ duplex 5 zuru oke
• Ndị ọrụ òkè na-akparaghị ókè
• Naanị ndị ọrụ na-ege ntị na-akparaghị ókè
• 900MHz ugboro band
• Teknụzụ FHSS ezoro ezo
• Obere ma dị arọ
• Ihe owuwu na-eguzogide mmiri
• Ihe ruru. Ndụ batrị elekere 8
• Obere oge (ihe na-erughị 35 ms)

Kedu ihe agụnyere na MICROCOM 900M?

• Holster
• Lanyard
• Igwe nchaji USB
• Ntuziaka mmalite ngwa ngwa
• Kaadị ndebanye aha ngwaahịa

NZIRI EGO

Nọmba akụkụ	Nkọwa
Ngwa MicroCom
PAC-USB6-CHG	MicroCom 6-ọdụ ụgbọ mmiri USB chaja
ACC-USB2-CHG	2-ọdụ ụgbọ mmiri USB chaja
PAC-MC-SFTCASE	MicroCom Soft Travel Case
PAC-MCXR-5CASE	MicroCom Hard Travel Case
CAB-4F-DMG	MicroCom ka AD903 DMG ka XLR USB
BT-11	Batrị Li-Ion nnọchi
Igwe isi
PHS-SB11LE-DMG	SmartBoom® LITE Single Ear Pliant ekweisi nwere njikọ Dual Mini maka MicroCom
PHS-SB110E-DMG	SmartBoom PRO Single Ear Pliant ekweisi nwere njikọ Dual Mini maka MicroCom
PHS-SB210E-DMG	DMG: SmartBoom PRO Dual Ear Pliant headset na Dual Mini njikọ maka MicroCom
PHS-IEL-M	Igwe isi in-ear MicroCom, otu ntị, naanị aka ekpe
PHS-IER-M	Igwe isi ntị MicroCom, otu ntị, naanị nri
PHS-IELPTT-M	Igwe isi in-anụ MicroCom nwere bọtịnụ push-to-talk (PTT), otu ntị, naanị aka ekpe
PHS-LAV-DM	MicroCom lavalier igwe na eartube
PHS-LAVPTT-DM	Igwe okwu MicroCom lavalier na eartube nwere bọtịnụ PTT

Njikwa

Ngosipụta ihe ngosi

MELITE

1. Jikọọ ekweisi na eriri belt. Njikọ ekweisi eriri belt na-akwado isi okwu abụọ na otu obere isi. Enwere ike itinye njikọ njikọ abụọ n'akụkụ ọ bụla. Enwere ike itinye otu obere njikọ n'ọdụ ụgbọ mmiri nke njikọ ekweisi.
2. Ike na. Pịa ma jide bọtịnụ POWER maka sekọnd atọ (3), ruo mgbe ihuenyo ga-agbanye.
3. Họrọ otu. Pịa ma jide bọtịnụ MODE maka sekọnd 3 ruo mgbe akara "GRP" na-egbuke egbuke na LCD. Mgbe ahụ, jiri bọtịnụ VOLUME +/- họrọ nọmba otu site na 0-51 (ma ọ bụ 0-24 maka ụdị PMC-900M-AN). Mkpịrị pịa MODE ka ịchekwaa nhọrọ gị wee gaba na ntọala ID.
   1. Ihe dị mkpa: Beltpacks ga-enwerịrị otu nọmba otu iji kparịta ụka.
4. Họrọ ID. Mgbe “ID” malitere ịnya isi na LCD, jiri VOLUME +/- bọtịnụ họrọ nọmba NJ pụrụ iche. Pịa ma jide MODE ka ịchekwaa nhọrọ gị wee pụọ na menu.

• NJ ngwugwu dị site na 00–04.
• Otu mkpọ ga-eji “00” ID mgbe niile wee rụọ ọrụ dị ka nnukwu mkpọ maka ọrụ sistemụ kwesịrị ekwesị. “MR” na-akọwapụta mkpọ nna ukwu na LCD ya.
• Ngwunye naanị-ege ga-eji NJ “L”. Ị nwere ike ịmegharị ID "L" n'ọtụtụ eriri belt ma ọ bụrụ na ị na-edozi ndị ọrụ na-ege ntị. (Lee “Nhọrọ ụdị nnabata” na ibe 6 maka ozi ndị ọzọ gbasara usoro ahụ.)
• Akpa eriri okwu ekekọrịtara ga-ejirịrị NJ “Sh”. Ị nwere ike ịmegharị ID "Sh" n'ọtụtụ beltpacks ma ọ bụrụ na ị na-ahazi ndị ọrụ na-ekekọrịta. Agbanyeghị, enweghị ike iji NJ “Sh” n'otu oge yana ID zuru oke zuru oke ("04").

Batrị

Awụnyere batrị lithium-ion nke enwere ike ịchaji na ngwaọrụ ahụ. Tinye eriri USB na-ebunye n'ọdụ ụgbọ mmiri USB iji fanye batrị. Igwe ọkụ ọkụ LED dị n'akụkụ elu aka nri nke ngwaọrụ ahụ ga-enwusi ike na-acha uhie uhie mgbe batrị na-agbanyụ ma gbanyụọ ozugbo batrị chajịrị. Oge chajị batrị dị ihe dịka awa 3.5 site na oghere. Enwere ike iji eriri eriri ahụ mgbe ị na-ebufe, mana ime nke a nwere ike ịgbatị oge chajị batrị.

Ọrụ

• Kwuo okwu - Jiri KWURU bọtịnụ iji mee ma ọ bụ gbanyụọ okwu maka ngwaọrụ ahụ. Bọtịnụ a na-agbanwe site na otu, obere pịa. "TK" na-egosi na LCD mgbe agbanyere ya.
  » Maka ndị ọrụ duplex zuru oke, jiri otu obere pịa pịa ka gbanye ma gbanyụọ okwu.
  » Maka ndị ọrụ Ikekọrịta Okwu (“Sh”), pịa ma jide mgbe ị na-ekwu okwu iji mee ya maka ngwaọrụ ahụ. (Ọ bụ naanị otu onye ọrụ Ikekọrịta Okwu nwere ike ikwu okwu n'otu oge.)
• Olu elu na ala - Jiri bọtịnụ + na - jikwaa olu. "VOL" na uru ọnụọgụ sitere na 00-09 na-apụta na LCD mgbe a na-edozi olu.
• Ụdị LED -
  » Talk/State LED na-acha anụnụ anụnụ na blinks ugboro abụọ mgbe ị banyere na otu blinks mgbe esitere.
  » Ichaji ọkụ aka nri na-acha uhie uhie mgbe batrị dị ala yana ọ na-acha uhie uhie mgbe ịchaji na-aga n'ihu. Ikanam na-agbanyụ mgbe chaja zuru.

Sistemụ igwe microcom na-arụ ọrụ n'otu ebe

Usoro MicroCom dị iche iche kwesịrị iji otu otu maka beltpack niile na sistemụ ahụ. Pliant na-atụ aro ka sistemu ndị na-arụ ọrụ nso n'ebe ibe ha nọ debe otu ha ka ọ dịkarịa ala ụkpụrụ iri (10). Maka exampỌ bụrụ na otu sistemụ na-eji Group 03, sistemụ ọzọ dị nso kwesịrị iji Group 13.

Ntọala menu

Enwere ike ịhazi ntọala ndị a site na nchịkọta beltpack. Iji nweta menu, pịa ma jide MODE bọtịnụ maka 3 sekọnd, ruo mgbe akara "GRP" na-egbuke egbuke na LCD. Mgbe ahụ, pịa nkenke MODE pịa ugboro ole a kapịrị ọnụ iji nweta ntọala ịchọrọ ịgbanwe. Ozugbo ịmechara mgbanwe gị, pịa ma jide MODE ka ịchekwaa nhọrọ gị wee pụọ na menu.

• Gbanyụọ/ Gbanyụọ Sidetone - Sidetone na-enye gị ohere ịnụ onwe gị mgbe ị na-ekwu okwu. Gburugburu ndị dara ụda nwere ike ịchọ ka ịbawanye ụda akụkụ gị.
  » Iji dozie ụda akụkụ, banye na nchịkọta nhọrọ belt, wee pịa MODE bọtịnụ ugboro abụọ. Mgbe uru “S_” na-enwu na LCD, jiri ya Mpịakọta +/- bọtịnụ ka ịhọrọ nhọrọ site na S0–S5.
  »"S0" agbanyụrụ. Akara ngosi dị na eserese 4 ga-apụta n'elu aka nri nke ihuenyo beltpack mgbe Sidetone gbanyụrụ. "S1" bụ ọkwa akụkụ akụkụ kacha ala. "S5" bụ nke kachasị elu.
  » Ntọala sidetone ndabara bụ "S3."
• Nhọrọ ụdị nnabata - Ntọala a na-enye gị ohere ịtọ akpa belt ka ọ bụrụ ọnọdụ duplex zuru oke (ma ịnata ma na-ebufe) ma ọ bụ tọọ ya ka ọ nata naanị (ya bụ, naanị gee ntị, nke na-ewepụ ọrụ okwu belt ahụ).
  » Ka ịgbanwee ntọala ọnọdụ nnata, banye na nchịkọta nhọrọ beltpack, wee pịa MODE bọtịnụ ugboro atọ (3). Mgbe uru “P_” na-enwu na LCD, jiri ya Mpịakọta +/- bọtịnụ ka ịhọrọ n'etiti "PO" na "PF."
  » "PO" zuru duplex (ma ịnata ma na-ebufe). Enwere ike iji ụdị a naanị yana NJ mkpọ 00-04.
  » “PF” ka a na-enweta naanị (ya bụ, naanị gee ntị). Enwere ike iji ọnọdụ a na NJ mkpọ ọ bụla, mana ọ bụrụ na ịchọrọ ịtọlite ​​​​ọtụtụ ndị na-ege ntị naanị, ị nwere ike ime ya site na ịmegharị ID “L” dịka ọ dị mkpa, na ịtọ mkpọ ọ bụla na ọnọdụ “PF”. Nke a bụ ihe ewepụrụ na iwu na akpa belt niile ga-enwerịrị nọmba NJ pụrụ iche.
  » Ntọala ọnọdụ ndabara bụ "PO."

Njikwa Ọkwa Mmetụta Igweokwu

Tọọ mmetụta uche igwe dabere na gburugburu gị na ike ekweisi. Gburugburu ndị dara ụda nwere ike ịchọ ka ibelata uche igwe igwe, ebe gburugburu dị jụụ nwere ike ịchọ ka ịbawanye ya.

• Ka ịhazie ntọala mmetụta igweokwu, nweta menu mkpọ belt, wee pịa MODE bọtịnụ ugboro anọ (4). Mgbe uru “C_” na-enwu na LCD, jiri ya Mpịakọta +/- bọtịnụ ka ịhọrọ nhọrọ site na C1–C5.
• "C1" bụ ọkwa uche kacha ala. "C5" bụ nke kachasị elu.
• Ntọala ọkwa mmetụta igwe okwu ndabara bụ "C1."

Mmepụta ọdịyo dị elu/ dị ala

A na-atụ aro mmepụta ọdịyo dị elu maka gburugburu ụda olu. Ịgbanwe ntọala mmepụta ebe a na-ebute mmụba ma ọ bụ mbelata nke 3 dB.

• Ka ịgbanwee ntọala mmepụta ọdịyo, banye na nchịkọta nhọrọ beltpack, wee pịa bọtịnụ MODE ugboro ise (5). Mgbe uru "U_" na-egbuke egbuke na LCD, jiri VOLUME +/- bọtịnụ họrọ n'etiti "UL" na "UH."
• "UL" bụ mmepụta ọdịyo dị ala. "UH" bụ mmepụta ọdịyo dị elu.
• Ntọala mmepụta ọdịyo ndabara bụ "UH" (mpụta ụda dị elu).

Nhọrọ menu

Ntọala menu	Nhọrọ	Nkọwa
Sidetone	S0 S1, S2, S3*, S4, S5	Sidetone Gbanyụọ Sidetone Ọkwa 1–5
Ụdị nnabata	PO * PF	Ụdị nnata na ịnyefe naanị ụdị nnabata (naanị-ntị)
Ọkwa Mmetụta Igwe	C1*, C2, C3, C4, C5	Ọkwa 1–5 nke mmetụta uche
Ọkwa mmepụta ọdịyo	UL UH*	Mmepụta ọdịyo dị ala dị elu

Ntọala akwadoro site na isi okwu

Tebụlụ na-esote na-enye ntọala MicroCom akwadoro maka ọtụtụ ụdị ekweisi nkịtị.

Ụdị ekweisi	Akwadoro Ịtọ ntọala
	Ọkwa Mmetụta Igwe	Ọkwa mmepụta ọdịyo
Igweisi nwere igwe okwu ọganihu	C1	UH
Igweisi nwere igwe okwu lavalier	C3	UH

Jiri eserese nke wiring maka njikọ TRRS nke beltpack ma ọ bụrụ na ịhọrọ ijikọ ekweisi nke gị. The microphone bias voltage nso bụ 1.9V DC ebutu na 1.3V DC kwajuru.

Nkọwa ngwaọrụ

Nkọwapụta*	PMC-900M	PMC-900M-AN ***
Ụdị ugboro redio	ISM 902–928 MHz	ISM 915–928 MHz
Okwu Interface	ISM 900 MHz: Mgbanwe FSK na Ntugharị ugboro ugboro
Codec olu	16 bit / 16 kHz
Ike mmepụta Tx Max	100mW
Mmetụta Rx	-95 dBm
Latency olu	<35 ms
Ọwa ugboro ugboro	Ọwa 78
Oghere ọwa	2 MHz
Ọnụego data	2 Mbps
Ụdị batrị	Ntugharị 3.7 V, 1,100 mA Li-ion batrị edoziri
Ndụ batrị	Ihe ruru. awa 8
Nkezi oriri ike	10mA na Klas 1 (100mW)
Typedị .gwọ	USB Micro, 5V1-2A
Nzaghachi ugboro ugboro	50 Hz - 7 kHz
Ndị ọrụ Duplex zuru oke	5
Akụkụ / Ibu	98 mm (H) x 49 mm (W) x 17 mm (D) / 88 g
Ngosipụta	7-akụkụ LCD

• Mara banyere nkọwapụta: Ọ bụ ezie na Pliant Teknụzụ na-eme mgbalị ọ bụla iji dobe izi ezi nke ozi dị na akwụkwọ ntuziaka ngwaahịa ya, ozi ahụ ga-agbanwe n'enweghị ọkwa. Nkọwapụta arụmọrụ gụnyere n'ime akwụkwọ ntuziaka a bụ nkọwa dabere n'ichepụta ma tinye ya maka nduzi ndị ahịa yana iji kwado nrụnye sistemu. Ọrụ arụ ọrụ nwere ike ịdị iche. Onye nrụpụta nwere ikike ịgbanwe nkọwapụta iji gosipụta mgbanwe kachasị ọhụrụ na teknụzụ yana nkwalite n'oge ọ bụla na-enweghị ọkwa.
• A kwadoro PMC-900M-AN maka ojiji na Australia na New Zealand ma na-arụ ọrụ n'ime oke 915-928 MHz.

Nlekọta ngwaahịa na nlekọta

Jiri nwayọ dị ọcha, damp akwa .
kpachara anya: Ejila ihe nhicha nwere ihe mgbaze. Debe mmiri mmiri na ihe ndị si mba ọzọ na oghere ngwaọrụ. Ọ bụrụ na ngwaahịa ahụ kpuchiri mmiri ozuzo, jiri nwayọ hichapụ elu niile, eriri na eriri USB ozugbo enwere ike wee hapụ otu nkeji ka akpọọ nkụ tupu ịchekwaa.

Nkwado ngwaahịa

Pliant Teknụzụ na-enye nkwado teknụzụ site na ekwentị na email site na 07:00 ruo 19:00 Central Time (UTC-06:00), Mọnde ruo Fraịde. 1.844.475.4268 ma ọ bụ +1.334.321.1160 oru.support@plianttechnologies.com Gaa leta www.plianttechnologies.com maka nkwado ngwaahịa, akwụkwọ, na nkata ndụ maka enyemaka. (Nkparịta ụka dị ndụ dị 08:00 ruo 17:00 Central Time (UTC-06:00), Mọnde ruo Fraịde.)

Ngwa eji eweghachi maka ndozi ma ọ bụ ndozi

Ajuju niile na/ma ọ bụ arịrịọ maka Nọmba ikike nlọghachi kwesịrị ka eduzi ya na ngalaba ọrụ ndị ahịa (customer.service@plianttechnologies.com). Eweghachila ngwa ọ bụla ozugbo na ụlọ ọrụ mmepụta ihe na-ebughị ụzọ nweta nọmba ikike nlọghachi (RMA). Inweta ọnụọgụ ikike ihe onwunwe nloghachi ga-ahụ na ejiri ngwa ngwa gị edozi ya ozugbo. Ekwesịrị ka ebupu ngwaahịa Pliant niile site na UPS, ma ọ bụ mbupu kacha mma dị, akwụgoro na mkpuchi mkpuchi. Ekwesịrị ibupu akụrụngwa na katọn nkwakọ ngwaahịa mbụ; ọ bụrụ na nke ahụ adịghị, jiri akpa ọ bụla dabara adaba nke siri ike yana nha zuru oke iji jiri opekata mpe sentimita anọ nke ihe na-akpata ujo gbachie ngwa ahụ. Ekwesịrị iziga mbupu niile na adreesị na-esonụ ma ga-agụnye nọmba ikike nke ihe onwunwe lọta: Pliant Technologies Department of Customer Service Attn: Return Material Authorization # 205 Technology Parkway Auburn, AL USA 36830-0500

Ozi Ikikere

PLIANT TECHNOLOGIES MICROCOM™ FCC Nkwukọrịta Nkwekọrịta

• 00004130 (FCCID: YJH-MC-11)
• 00004130-B na 00004303 (FCCID: YJH-MCS-900)

A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị B, dabere na akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta, na-eji ma nwee ike ịgbasa ike ugboro redio na, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu n'ime usoro ndị a:

• Megharịa ma ọ bụ bugharịa antenna nnata.
• Mee ka nkewa dị n'etiti akụrụngwa na nnata.
• Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata.
• Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.

kpachara anya
Mgbanwe nke ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa ahụ.

Ozi nnabata FCC

Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:

1. Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana
2. Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.

IHE DỊ MKPA

Nkwupụta Ngosipụta Radiation FCC RF: Ngwa a na-akwado oke mkpughe radieshon FCC RF ewepụtara maka gburugburu anaghị achịkwa. A ga-etinyerịrị antennas eji maka nnyefe a iji nye anya nkewa nke opekata mpe 5 mm na mmadụ niile na agaghị etinye ya ma ọ bụ na-arụ ọrụ na njikọ antenna ma ọ bụ nnyefe ọ bụla.

Nkwuputa nrube isi nke Canada

Ngwaọrụ a nwere ihe mbufe / nnata (s) enweghị ikike nke na-agbaso Innovation, Science and Economic Development RSS(s) enweghị ikike nke Canada. (Kpọmkwem RSS 247 Issue 2 (2017-02) na RSS-GEN Issue 5 (2018-04) Ọrụ bụ n'okpuru ọnọdụ abụọ ndị a:

1. Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya.
2. Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla, gụnyere nnyonye anya nwere ike bute ịrụ ọrụ ngwaọrụ a na-achọghị.

Nkwupụta KWESỊRỊ PLIANT

OKWU MMADỤ

N'okpuru ọnọdụ nke akwụkwọ ikike a nwere oke, ngwaahịa CrewCom na MicroCom na-akwado ka ha nweere onwe ya pụọ ​​​​na ntụpọ na ihe na arụ ọrụ maka afọ abụọ site na ụbọchị erere na onye ọrụ njedebe, n'okpuru ọnọdụ ndị a.

• Afọ mbụ nke akwụkwọ ikike gụnyere na ịzụrụ.
• Afọ nke abụọ nke akwụkwọ ikike chọrọ ndebanye aha ngwaahịa na Pliant web saịtị. Debanye aha ngwaahịa gị ebe a: https://plianttechnologies.com/product-registration/ N'okpuru ọnọdụ nke akwụkwọ ikike nwere oke, ngwaahịa ọkachamara Tempest® na-ebu akwụkwọ ikike ngwaahịa afọ abụọ. N'okpuru ọnọdụ nke akwụkwọ ikike nwere oke, isi na ngwa niile (gụnyere batrị Pliantbranded) na-ebu akwụkwọ ikike otu afọ. A na-ekpebi ụbọchị ire ere site na ụbọchị akwụkwọ ọnụahịa sitere n'aka onye na-ere ahịa ikike ma ọ bụ onye nkesa ikike nye onye ọrụ njedebe.

Naanị ọrụ dị n'aka Pliant Technologies, LLC n'oge oge ikike bụ ịnye, na-enweghị ụgwọ, akụkụ na ọrụ dị mkpa iji dozie ntụpọ ekpuchiri ekpuchi na-apụta na ngwaahịa eweghachitere na Pliant Technologies, LLC. Akwụkwọ ikike a anaghị ekpuchi ntụpọ ọ bụla, adịghị arụ ọrụ, ma ọ bụ ọdịda nke ọnọdụ karịrị njikwa Pliant Technologies, LLC, gụnyere mana ọnweghị oke na ọrụ eleghara anya, mmegbu, ihe mberede, ịgbaso ntuziaka dị na ntuziaka ọrụ, akụrụngwa nwere nkwarụ ma ọ bụ na-ekwesịghị ekwesị. , nwaa mgbanwe na/ma ọ bụ nrụzi enyeghị ikike Pliant Technologies, LLC na mmebi mbupu. Ọ gwụla ma iwu steeti dabara adaba enyeghị ụzọ ọzọ, Pliant Teknụzụ na-agbatịkwu ikike ikike a nye naanị onye ọrụ ngwụcha zụtara ngwaahịa a n'aka onye na-ere ikike ma ọ bụ onye nkesa ikike. Pliant Teknụzụ anaghị agbatị ikike a nye onye nwe ya ma ọ bụ onye ọzọ bufee ngwaahịa a. Akwụkwọ ikike a bara uru naanị ma ọ bụrụ na onye ahịa ikike ma ọ bụ onye nkesa ikike nyere onye zụrụ onye zụrụ ihe mbụ, na-akọwapụta ụbọchị ịzụrụ, yana nọmba serial, ebe ọdabara, gosipụtara ngwaahịa a ga-arụzi. Pliant Teknụzụ nwere ikike ịjụ ọrụ akwụkwọ ikike ma ọ bụrụ na enyeghị ozi a ma ọ bụ wepụrụ ma ọ bụ mebie nọmba serial ngwaahịa. Akwụkwọ ikike a nwere oke bụ naanị akwụkwọ ikike awara awara awara awara enyere n'ihe gbasara ngwaahịa Pliant Technologies, LLC. Ọ bụ ọrụ dịịrị onye ọrụ ikpebi tupu ịzụta na ngwaahịa a dabara maka ebumnuche onye ọrụ. Akwụkwọ ikike ọ bụla, gụnyere akwụkwọ ikike a na-ekwupụta, nwere oke akwụkwọ ikike nke akwụkwọ ikike a pere mpe. MA PLIANT TECHNOLOGIES, LLC ma ọ bụ onye na-ere ahịa ikike ikike nke na-ere ngwaahịa PLIANT Ọkachamara INTERCOM ga-akwụ ụgwọ maka mmebi mberede ma ọ bụ ihe ga-esi na ya pụta n'ụdị ọ bụla.

NKE AKA NKE AKA AKA

Akụkụ ngbanwe maka Pliant Teknụzụ, ngwaahịa LLC ka enyere ikike inwere onwe ya pụọ ​​na ntụpọ n'ihe yana arụ ọrụ maka ụbọchị 120 site na ụbọchị erere ruo onye ọrụ njedebe. Akwụkwọ ikike a anaghị ekpuchi ntụpọ ọ bụla, adịghị arụ ọrụ, ma ọ bụ ọdịda nke ọnọdụ karịrị njikwa Pliant Technologies, LLC, gụnyere mana ọnweghị oke na ọrụ eleghara anya, mmegbu, ihe mberede, ịgbaso ntuziaka dị na ntuziaka ọrụ, akụrụngwa nwere nkwarụ ma ọ bụ na-ekwesịghị ekwesị. , nwaa mgbanwe na/ma ọ bụ nrụzi enyeghị ikike Pliant Technologies, LLC na mmebi mbupu. Mmebi ọ bụla emere akụkụ nọchiri anya n'oge ntinye ya na-efunahụ ikike nke akụkụ ahụ nọchiri anya ya. Akwụkwọ ikike a nwere oke bụ naanị akwụkwọ ikike awara awara enyere gbasara ngwaahịa Pliant Teknụzụ LLC. Ọ bụ ọrụ dịịrị onye ọrụ ikpebi tupu ịzụta na ngwaahịa a dabara maka ebumnuche onye ọrụ. Akwụkwọ ikike ọ bụla, gụnyere akwụkwọ ikike a na-ekwupụta, nwere oke akwụkwọ ikike nke akwụkwọ ikike a pere mpe. MA PLIANT TECHNOLOGIES, LLC ma ọ bụ onye na-ere ahịa ikike ikike nke na-ere ngwaahịa PLIANT Ọkachamara INTERCOM ga-akwụ ụgwọ maka mmebi mberede ma ọ bụ ihe ga-esi na ya pụta n'ụdị ọ bụla. Akwụkwọ ikike a anaghị ekpuchi ntụpọ ọ bụla, adịghị arụ ọrụ, ma ọ bụ ọdịda nke ọnọdụ karịrị njikwa Pliant Technologies, LLC, gụnyere mana ọnweghị oke na ọrụ eleghara anya, mmegbu, ihe mberede, ịgbaso ntuziaka dị na ntuziaka ọrụ, akụrụngwa nwere nkwarụ ma ọ bụ na-ekwesịghị ekwesị. , nwaa mgbanwe na/ma ọ bụ nrụzi enyeghị ikike Pliant Technologies, LLC na mmebi mbupu. Mmebi ọ bụla emere akụkụ nnọchi n'oge ntinye ya na-efunahụ ikike nke akụkụ nnọchi anya. Akwụkwọ ikike a nwere oke bụ naanị akwụkwọ ikike awara awara awara awara enyere n'ihe gbasara ngwaahịa Pliant Teknụzụ LLC. Ọ bụ ọrụ dịịrị onye ọrụ ikpebi tupu ịzụta na ngwaahịa a dabara maka ebumnuche onye ọrụ. Akwụkwọ ikike ọ bụla, gụnyere akwụkwọ ikike a na-ekwupụta, nwere oke akwụkwọ ikike nke akwụkwọ ikike a pere mpe. MA PLIANT TECHNOLOGIES, LLC ma ọ bụ onye na-ere ahịa ikike ikike nke na-ere ngwaahịa PLIANT Ọkachamara INTERCOM ga-akwụ ụgwọ maka mmebi mberede ma ọ bụ ihe ga-esi na ya pụta n'ụdị ọ bụla.

Nwebiisinka © 2022 Pliant Teknụzụ, LLC. Ikike niile echekwabara. Pliant®, MicroCom®, na Pliant “P” bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Pliant Teknụzụ LLC. Ighalaahịa ndị ọzọ niile bụ akụrụngwa nke ndị nwe ha. Ntuziaka akwụkwọ: D0000511_J Pliant Technologies, LLC 205 Technology Parkway Auburn, Alabama 36830 USA Phone +1.334.321.1160 Toll-Free 1.844.475.4268 ma ọ bụ 1.844.4PLIANT Fax +1.334.321.1162 www.plianttechnologies.com