Mgbakwunye RST-15K-HV 15KW nwere nnukwu Voltage Mmepụta Ntuziaka ntuziaka

RST-15K-HV bụ 15KW 3ψ ntinye etinyere ụdị ọkụ AC / DC. Usoro a na-arụ ọrụ maka ntinye AC atọ dị obosara ma na-enye ụdị ndị a nwere volta dị elutage DC mmepụta (115V / 230V / 380V) nke na-achọkarị n'aka ụlọ ọrụ. Usoro a na-enye ụdị na mmanye ikuku jụrụ, nke nwere ike na-arụ ọrụ na ambient okpomọkụ ruo 70 ℃. Ọzọkwa, RST-15K-HV na-enye mgbanwe mgbanwe dị ukwuu site n'ịkwado ọrụ dị iche iche arụnyere dị ka mmemme mmepụta, nkesa ugbu a na-arụ ọrụ, njikwa ON-OFF, akara ngosi. wdg.

Ihe ntinye ihe nlere

Nkọwapụta

Ụdị		RST-15K-115	RST-15K-230	RST-15K-380
Mpụta	DC VOLTAGE (ndabara ụlọ ọrụ)	115V	230V	380V
	UGBUA (ndabara ụlọ nrụpụta)	130A	64.8A	39.55A
	Oghere dị ugbu a	0 ~ 130 A	0 ~ 69 A	0 ~ 45 A
	EGO IKE	14950W	14904W	15030W
	zuru ezu IKE VOLTAGE RANGE	115 ~ 138V	216 ~ 260V	334 ~ 400V
	MGBE NA MMỤTA (max.) Rịba ama. 2	1Vp-p	2Vp-p	4Vp-p
	VOLTAGE ADJ. MGBE	90 ~ 138V	170 ~ 260V	260 ~ 400V
	VOLTAGE ADJ. MGBE	Enwere ike ịhazi ya site na potentiometer arụnyere n'ime ya
	VOLTAGE ndidi Rịba ama. 3	±1.0%	±1.0%	±1.0%
	AKA Iwu	±0.5%	±0.5%	±0.5%
	Iwu Ibu Ibu	±0.5%	±0.5%	±0.5%
	NTKWU, NA-ebili oge	3000ms, 200ms na ibu zuru oke
	Jidesie oge (Ụdị)	16ms 230VAC/400VAC na 75% ibu 10ms / 230VAC/400VAC na ibu zuru oke
Ntinye	VOLTAGE nso	3ψ 3W/△196~305VAC ma ọ bụ 3ψ 4W/Y 340~530VAC
	Ugboro ugboro	47 ~ 63Hz
	IHE MGBE IKE (Ụdị)	≧0.98/230VAC(400VAC)/≧0.97/277VAC(480VAC) na ibu zuru oke
	OKWU (Ụdị) Rịba ama. 7	93%	94%	94%
	AC ugbu a (Ụdị)	45A/230VAC(3ψ 3-waya / △) 26A/230VAC(3ψ 4-waya / Y)
	INRUSH Ugbu a (pdị.)	150A/230VAC(3ψ 3-waya / △) 100A/230VAC(3ψ 4-waya / Y)
	NKWUKWU UGBUA	<3.5mA/Y 530VAC <21mA /△305VAC
Nchedo	bufee	100 ~ 107% nke egosiri ugbu a
	bufee	Ụdị nchedo: mmachi na-adị ugbu a, otu ga-emechi mgbe nkeji ise gachara. re-ike na-agbake
	N'elu VOLTAGE	145 ~ 166V	273 ~ 312V	420 ~ 480V
	N'elu VOLTAGE	Ụdị nchekwa : Gbanyụọ o/p voltage, re-ike na-agbake
	GARA Okpomọkụ	Mechie o/p voltage, na-agbake na-akpaghị aka mgbe okpomọkụ dara
Ọrụ	Ịkekọrịta ugbu a	Ruo 2 nkeji. Biko rụtụ aka na ntuziaka ọrụ
	Mpụta VOLTAGE AKWỤKWỌ	Ndozi nke mmepụta voltage nwere ike ime n'etiti 1 ~ 120% nke ntinye aha voltage. Biko rụtụ aka na ntuziaka ọrụ curve PV
	NA-AKWỤKWỌ UGBUA Ọkwa AKWỤKWỌ	Enwere ike ime mgbanwe nke ọkwa dị ugbu a n'etiti 20 ~ 100% nke akara ugbu a. Biko rụtụ aka na ntuziaka ọrụ
	Njikwa Ọpụpụ	Biko rụtụ aka na akwụkwọ ntuziaka
	Mpụta akara ngosi	AC dara, DC OK, fan ada, OTP. Biko rụtụ aka na ntuziaka ọrụ.
Gburugburu Ebe Obibi	ỌRỤ NA-arụ ọrụ.	-30 ~ +70 ℃ (tụ aka na "Derating Curve")
	Iru mmiri na-arụ ọrụ	20 ~ 90% RH na-abụghị condensing
	Okpomọkụ nchekwa, iru mmiri	-40 ~ +85 ℃, 10 ~ 95% RH na-abụghị condensing
	TEMP. EGO	0.03%/℃ (0 ~ 45 ℃)
	VIBRATION	10 ~ 500Hz, 2G 10min./1 okirikiri, 60min. nke ọ bụla tinyere X, Y, Z axe
Nchekwa & EMC (Ntụbaaka nke 6,8)	Ọkọlọtọ nchekwa	UL62368-1, CAN/CSA C22.2 Nọmba 62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 kwadoro
	NA -ECHE VOLTAGE	I/PO/P:4.3KVDC I/P-FG:2.8KVDC O/P-FG:2.8KVDC
	NNỌPỤ ICHE Nguzogide	I/PO/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25 ℃/ 70% RH
	EMC EMISỌ	Oke	Ọkọlọtọ	Ọkwa ule / ndetu
		Emere	BS EN/EN55032 (CISPR32) / BS EN/EN55011 (CISPR11)	Klas B
		Gbanyere	BS EN/EN55032 (CISPR32) / BS EN/EN55011 (CISPR11)	Klas A
		Harmonic Ugbu a	BS EN/EN61000-3-12	—-
		Voltage Flicker	BS EN/EN61000-3-3	—-
	EMC MGBE	BS EN/EN55024, BS EN/EN61204-3, BS EN/EN61000-6-2
		Oke	Ọkọlọtọ	Ọkwa ule / ndetu
		ESD	BS EN/EN61000-4-2	Ọkwa 3, 8KV ikuku; Ọkwa 2, kọntaktị 4KV
		Gbanyere	BS EN/EN61000-4-3	Ọkwa 3
		EFT / gbawara	BS EN/EN61000-4-4	Ọkwa 3
		Mwapụta	BS EN/EN61000-4-5	Ọkwa 4, 4KV/Akara-Ụwa; Ọkwa 3, 2KV/Line-Line
		Emere	BS EN/EN61000-4-6	Ọkwa 3
		Ubi magnetik	BS EN/EN61000-4-8	Ọkwa 4
		Voltage Dips na nkwụsị	BS EN/EN61000-4-11	> 95% tinye 0.5 oge, 30% itinye oge 25, > 95% nkwụsịtụ oge 250
Ndị ọzọ	MTBF	121.9K elekere nkeji. Telcordia SR-332 (Bellcore); 16.2K elekere min. MIL-HDBK-217F (25 ℃)
	Akụkụ	54042483.5mm (LWH)
	Mbukota	25Kg; 1pcs / 25Kg / 2.82CUFT
IHE	A na-atụkwa parampat niile akọwaghị aha ya na ntinye △230VAC(Y 400VAC), ibu akwadoro na 25℃ nke ọnọdụ okpomọkụ. A na-atụ Ripple & mkpọtụ na 20MHz nke bandwit site na iji waya abụọ gbagọrọ agbagọ 12 ″ kwụsịrị na 0.1uf & 47uf myirịta capacitor. Ntachi obi :gụnyere ịtọhapụ ndidi, nhazi ahịrị na nhazi ibu. Enwere ike ịdị mkpa ịkwanye n'okpuru obere ntinye voltages. Biko lelee usoro nbibi maka nkọwa ndị ọzọ. Ọ bụrụ na iji akara PV dozie Vo, n'okpuru ọnọdụ ọrụ creatin, mkpọtụ Vo nwere ike gafere ọkwa akọwapụtara na nkọwapụta a. Achọrọ ihe nzacha EMI ọzọ iji zute ụkpụrụ nke EMC eduzi na ikuku na-ekpochapụ. Njirimara nke nzacha EMI biko rụtụ aka na tebụl, Mfu ntinye kacha nta. A tụrụ arụmọrụ ya na △: 230VAC/Y: ntinye 400VAC. A na-atụ ọkwa arụmọrụ na mmepụta voltage 115V(115V nlereanya)/230V(230V nlereanya)/ 380V(380V nlereanya). A na-ahụta ọkụ eletrik dị ka akụrụngwa nke a ga-etinye n'ime akụrụngwa ikpeazụ. A na-eme ule EMC niile site n'ịkwanye unit ahụ na efere ígwè 600mm * 900mm nwere ọkpụrụkpụ 1mm. A ghaghị ikwenye ọzọ akụrụngwa ikpeazụ na ọ ka na-emezu ntụziaka EMC. Maka ntụzịaka maka otu esi eme ule EMC ndị a, biko rụtụ aka na “Nnwale EMI nke akụrụngwa akụrụngwa.” (dị ka ọ dị na http://www.meanwell.com) The ambient okpomọkụ derating nke 3.5 ℃ / 1000m na fanless ụdị na nke 5℃ / 1000m na fan ụdị maka arụ ọrụ elu karịa 2000m (6500ft). O/P voltage na-atụ anya na 300ms mbụ mgbe ike gbanyechara. A na-atụ aro ibu kacha nta nke 5% ma ọ bụrụ na achọrọ mgbanwe ngwa ngwa na ike n'oge. Nkwụghachi ụgwọ ngwaahịa: Maka ozi zuru ezu, biko rụtụ aka https://www.meanwell.com/serviceDisclaimer.aspx

Ihe NgosiAKWỤKWỌ KWESỊRỊ

IHE NDỊ MMADỤ STATIC VS LOAD (MODEEL 380V)

Njikọ Ike AC
Ihe osise 1.2
◎3ψ3-waya /△196~305VAC ψ 3 4-waya / Y 340~530VAC Rịba ama : RST-15K nwekwara ike rụọ ọrụ site 1ψ2-waya 196 ~ 305VAC ntinye. Biko rụtụ aka na eserese njikọ dị n'okpuru.
Ịrụ ọrụ na 1ψ2-waya nwere ike iduga ụfọdụ njirimara dị iche na nkọwapụta, dị ka nnukwu Ripple na Noise. Ọ bụrụ na enwere nsogbu, biko kpọtụrụ MEAN WELL.

Akwụkwọ ntuziaka ọrụ

Mmepụta Voltage Mmemme (ma ọ bụ, PV/ remote voltage programming/ remote adjust/margin programming/dynamic voltage trim)
1. Mepụta ya site na potentiometer (SVR)
  - Nwee ọnọdụ mgbanwe DIP-3 ka ọ dị
  - Mmepụta voltage nwere ike ịkpụcha ya site na SVR.
2. Site na mmepụta Voltage Programming
  - Nwee ọnọdụ mgbanwe DIP-3 ka ọ dị
  - Mmepụta voltage nwere ike ịbelata 1 ~ 120% site n'itinye EXTERNAL VOLTAGE n'etiti PV+ na PV- na CN26 ma ọ bụ CN27.
  - Ihe mmepụta 100% voltage bụ 115/216/334V.
  - Mgbe mgbama PV iji dozie voltage n'okpuru Vo <11.5V(115V ụdị) / 21.6V (230V nlereanya) / 33.4V (380V nlereanya) na ike ibu ọnọdụ, na Vo overshoot & undershoot nwere ike gafere ọkwa.
  - Ogo nke ugbu a kwesịrị ịgbanwe site na mmepụta Voltage Programming otú ahụ.
  - Oke mmepụta kacha ugbu a dabere na ike wat ewepụtaratage.

Mmemme na-adị ugbu a (ma ọ bụ, PC / mmemme ime ihe ugbu a / mkpụbelata ugbu a dị ike)
1. Nchekwa ibufe ibu nke an-kpọ(OLP) 100~107% nke akara ugbu a
  - Nwee ọnọdụ mgbanwe DIP-2 ka ọ dị
  - Nwepụta ugbu a ka edobere uru ndabara.
2. site na mmemme ọkwa ọkwa mgbe niile
  - Nwee ọnọdụ mgbanwe DIP-2 ka ọ dị
  - Enwere ike ibelata ọkwa dị ugbu a mgbe niile ka ọ bụrụ 20 ~ 100% nke akara ugbu a site na itinye Mpụga VOL.TAGE n'etiti PC+ na PC- na CN26 ma ọ bụ CN27.

Mpịakọta MpụgaTAGE (DC)
Ihe osise 2.2

3. Họrọ Nchekwa oke ibu (OLP).
(1) Ọnọdụ na-aga n'ihu na-adị ugbu a
Nwee ọnọdụ DIPswitch-1 ka ọ bụrụ , na RST-15K ga-arụ ọrụ na-aga n'ihu na-aga n'ihu na ọnọdụ ugbu a mgbe mmepụta karịrị akarị na mmepụta voltage karịrị 50% nke mmepụta voltage.

Ụdị nkwụsịtụ igbu oge
Nwee ọnọdụ DIPswitch-1 ka ọ bụrụ , na RST-15K ga-emechi mgbe 5 sekọnd nke mgbe niile na-arụ ọrụ ugbu a, mgbe mmepụta na-overloaded ma ọ bụ mkpụmkpụ-circuited.

Njikwa ngbanyụ ọkụ

Enwere ike ịgbanye ọkụ ọkụ site na iji ọrụ "Remote ON-OFF".

N'etiti ON-OFF dịpụrụ adịpụ (CN25 pin5) na 12V-AUX (CN25 pin1) Ọnọdụ mmepụta

Gbanwee nso (Obere) ike ọkọnọ ON

Gbanwee mepee (Mepee) ọkụ ọkụ gbanyụrụ

Tebụl 4.1

5. Mpụta mgbaama mkpu
※ Enwere akara ngosi 4 na CN22, akara ngosi ọ bụla nwere ike họrọ ụdị sekit mmepụta abụọ.
(1) Mgbasa ozi kọntaktị {OTP1, OTP1-GND); (DC-OK1, DC-OK1-GND); (AC-FAIL1-GND, AC-FAIL1); (FAN-FAIL1-GND, FAN-FAIL1)} na-emepe kọntaktị na-emekarị. "Obere" mgbe mkpu bilitere. Rọkwa kọntaktị mgbagharị (kachasị) bụ ihe mgbochi 30V/1A.(2) Mmepụta ihe mkpokọ mepere emepe {DC-OK2-GND, DC-OK2); (AC-FAIL2-GND, AC-FAIL2); (OTP2, OTP2-GND); (FAN-FAIL2, FAN-FAIL2-GND)} Voltage chọrọ isi iyi maka ọrụ a nke egosiri na Fig 5.2. Ihe mgbaàmà ndị a dịpụrụ adịpụ na mmepụta. Oke sink kacha ugbu a bụ 10mA yana oke mpụta voltage bụ 20V (enwere 24V zener diode arụnyere n'ime sekit n'ime).6. Ịkekọrịta ugbu a
RST-15K nwere arụ ọrụ nkesa arụ ọrụ ugbu a yana enwere ike ijikọ ya n'otu oge, ruo nkeji 2, iji nye ike mmepụta dị elu dị ka egosiri n'okpuru:
※ Voltage kwesịrị ibelata ihe dị iche n'etiti mmepụta ọ bụla na achọrọ ihe na-erughị 0.2V.
※ Ngụkọta mpụta ugbu a agaghị agafe uru nke nha nha na-esote kpebiri.
Nrụpụta kacha ugbu a na arụrụ arụrụ arụ =(The rated current per unit)x(Ọnụ ọgụgụ nke otu) x0.95
※ Mgbe mkpokọta mmepụta ugbu a na-erughị 5% nke ngụkọta nke ugbu a, ma ọ bụ kwuo (5% nke Rated current kwa unit)×(Ọnụ ọgụgụ nke unit)
nke ugbu a na-ekekọrịta n'etiti nkeji nwere ike ghara ịbụ nke zuru ezu itule. CS+, CS- na RC+, RC- jikọtara ọnụ n'otu n'otu.

Nkọwapụta igwe

Ntuziaka ntinye

Oghere Mba	Nha ịghasa akwadoro	MAX. Omimi ntinye L	torque mgbago akwadoro
1	M4	5mm	7-10Kgf-cm

Ntụtụ njikwa No. Ọrụ CN26,CN27(): HRS DF11-06DP-2DS ma ọ bụ dakọtara 15

Ebe obibi	HRS DF11-06DS ma ọ bụ otu
Ọnụ	HRS DF11-** SC ma ọ bụ otu

Ejikọtara CN26 na CN27 n'ime.

Pin Nke	Ọrụ	Nkọwa
1	CS-	Mgbama nkekọrịta ugbu a. Mgbe ejikọrọ nkeji n'otu n'otu, a ga-ejikọta ntụtụ CS nke nkeji iji kwe ka nguzozi dị ugbu a n'etiti nkeji.
2	CS+
3	PC-	Njikọ maka mmepụta mmemme ugbu a.
4	PV-	Njikọ maka mmepụta voltage mmemme.
5	PC +	Njikọ maka mmepụta mmemme ugbu a.
6	PV+	Njikọ maka mmepụta voltage mmemme.

Ntụtụ njikwa No. Ọrụ CN22(): HRS DF11-16DP-2DS ma ọ bụ dakọtara 1 15

Ebe obibi	HRS DF11-16DS ma ọ bụ otu
Ọnụ	HRS DF11-** SC ma ọ bụ otu

Pin Nke	Ọrụ	Nkọwa
1	DC-OK1	Mgbama mkpu nke DC-OK. Kọntaktị na-emepe emepe. "Obere" mgbe PSU gbanyere. Rọkwa kọntaktị mgbagharị (kachasị) bụ ihe mgbochi 30V/1A.
2	AC-FAIL1	Mgbama mkpu nke AC-ọdịda. Kọntaktị na-emepe emepe. "Obere" mgbe ntinye PSU voltage dị oke ala. Rọkwa kọntaktị mgbagharị (kachasị) bụ ihe mgbochi 30V/1A.
3	DC-OK1-GND	Mgbama mkpu nke DC-OK. Kọntaktị na-emepe emepe. "Obere" mgbe PSU gbanyere. Rọkwa kọntaktị mgbagharị (kachasị) bụ ihe mgbochi 30V/1A.
4	AC-FAIL1-GND	Mgbama mkpu nke AC-ọdịda. Kọntaktị na-emepe emepe. "Obere" mgbe ntinye PSU voltage dị oke ala. Rọkwa kọntaktị mgbagharị (kachasị) bụ ihe mgbochi 30V/1A.
5	DC-OK2	Mgbama mkpu nke DC-OK. Mepee mgbaama onye nchịkọta. Dị ala mgbe PSU gbanyere. Oke sink kacha ugbu a bụ 10mA yana oke mpụta voltage bu 20v.
6	AC-FAIL2	Mgbama mkpu AC dara. Mepee mgbaama onye nchịkọta. Dị ala mgbe ntinye PSU voltage dị oke ala. Oke sink kacha ugbu a bụ 10mA yana oke mpụta voltage bu 20v.
7	DC-OK2-GND	Mgbama mkpu nke DC-OK. Mepee mgbaama onye nchịkọta. Dị ala mgbe PSU gbanyere. Oke sink kacha ugbu a bụ 10mA yana oke mpụta voltage bu 20v.
8	AC-FAIL2-GND	Mgbama mkpu AC dara. Mepee mgbaama onye nchịkọta. Dị ala mgbe ntinye PSU voltage dị oke ala. Oke sink kacha ugbu a bụ 10mA yana oke mpụta voltage bu 20v.
9	OTP1	Mgbama mkpu OTP. Kọntaktị na-emepe emepe. "Obere" mgbe PSU n'elu okpomọkụ nchedo mere. Rọkwa kọntaktị mgbagharị (kachasị) bụ ihe mgbochi 30V/1A.
10	FAN-FAIL2	Mgbama mkpu nke fan ada ada. Mepee mgbaama onye nchịkọta. Dị ala mgbe onye na-anụ ọkụ n'obi daa. Oke sink kacha ugbu a bụ 10mA yana oke mpụta voltage bu 20v.
11	OTP1-GND	Mgbama mkpu OTP. Kọntaktị na-emepe emepe. "Obere" mgbe PSU n'elu okpomọkụ nchedo mere. Rọkwa kọntaktị mgbagharị (kachasị) bụ ihe mgbochi 30V/1A.
12	FAN-FAIL2-GND	Mgbama mkpu nke fan ada ada. Mepee mgbaama onye nchịkọta. Dị ala mgbe onye na-anụ ọkụ n'obi daa. Oke sink kacha ugbu a bụ 10mA yana oke mpụta voltage bu 20v.
13	OTP2	Mgbama mkpu OTP. Mepee mgbaama onye nchịkọta. Dị ala mgbe PSU n'elu okpomọkụ nchedo mere. Oke sink kacha ugbu a bụ 10mA yana oke mpụta voltage bu 20v.
14	FAN-FAIL1	Mgbama mkpu nke fan ada ada. Kọntaktị na-emepe emepe. "Obere" mgbe onye n'ime ime daa. Rọkwa kọntaktị mgbagharị (kachasị) bụ ihe mgbochi 30V/1A.
15	OTP2-GND	Mgbama mkpu OTP. Mepee mgbaama onye nchịkọta. Dị ala mgbe PSU n'elu okpomọkụ nchedo mere. Oke sink kacha ugbu a bụ 10mA yana oke mpụta voltage bu 20v.
16	FAN-FAIL1-GND	Mgbama mkpu nke fan ada ada. Kọntaktị na-emepe emepe. "Obere" mgbe onye n'ime ime daa. Rọkwa kọntaktị mgbagharị (kachasị) bụ ihe mgbochi 30V/1A.

Ihe njikwa Pin No. Ọrụ (CN25): HRS DF11-08DP-2DS ma ọ bụ otu 1 7

Ebe obibi	HRS DF11-08DS ma ọ bụ otu
Ọnụ	HRS DF11-** SC ma ọ bụ otu

Pin Nke	Ọrụ	Nkọwa
1,3	12V-AUX	Enyemaka voltage mmepụta, 11.4 ~ 12.6V, zoro aka na pin 2,4 (GND-AUX). Naanị maka njikwa ngbanyụ anya & mgbama mkpu. Oke kachasị ugbu a bụ 0.1A. Ọ bụghị ọrụ "Mgbanwe ON/OFF" na-achịkwa mmepụta a.
2,4	GND-AUX	Enyemaka voltagna mmepụta GND. Nlaghachi mgbaama dịpụrụ adịpụ na njedebe mmepụta (+V & -V).
5,7	RC+	Enwere ike ịgbanwuo nsonaazụ ya na RC+ na RC-.
6,8	RC-	Enwere ike ịgbanwuo nsonaazụ ya na RC+ na RC-.

Akwụkwọ / akụrụngwa

Mgbakwunye RST-15K-HV 15KW nwere nnukwu Voltage Mmepụta [pdf] Akwụkwọ ntuziaka
RST-15K-HV, Ntinye 15KW nwere nnukwu Voltage mmepụta, High Voltage mmepụta, 15KW Ntinye ntinye, mmepụta

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Mgbakwunye RST-15K-HV 15KW nwere nnukwu Voltage Mmepụta

Atụmatụ

Ngwa

Nkọwapụta

Akwụkwọ ntuziaka ọrụ

Nkọwapụta igwe

Akwụkwọ / akụrụngwa

Ntụaka

Hapụ ikwu

Kagbuo nzaghachi

N'etiti ON-OFF dịpụrụ adịpụ (CN25 pin5) na 12V-AUX (CN25 pin1)	Ọnọdụ mmepụta
Gbanwee nso (Obere)	ike ọkọnọ ON
Gbanwee mepee (Mepee)	ọkụ ọkụ gbanyụrụ