MCS-LOGO

MCS Ikuku Modem

MCS-Wireless-Modem-PRODUCT

Nkọwapụta

  • Ụdị: MCS-WIRELESS-MODEM / MCS-WIRELESS-MODEM-INT
  • Ịnye ọkụ: 12V DC (not included)
  • Antenna: Dual Band Antenna recommended
  • ọdụ ụgbọ mmiri netwọk: LAN, WAN, Ethernet
  • Oke adreesị IP: NJ 192.168.18.X

WIRING MCS-WIRELESS-MODEM

(or MCS-WIRELESS-MODEM-INT) MCS-WIRELESS MODEM / INT ships as shown, use power plug or cut off plug and wire to a 12 volt power supply (not included).

MCS-Wireless-Modem-FIG- (1)

  1. If using a 12 volt power supply, cut the wire at the plug end, exposing the red and black wires.
  2. Connect the red wire to the +V connection of the power and black to the -V connection.

DUAL BAND ANTENNA

  • MCS recommends using the DUAL BAND ANTENNA BOOSTER for better reception.
  • Attach the Dual Band Antenna, thumb tight only to Mobile Main Antenna connection.

MCS-Wireless-Modem-FIG- (2)

Maka ịrụ ọrụ nke ọma n'ozuzu, a na-atụ aro ka idowe antenna na mpaghara enweghị ihe mgbochi na nnyonye anya, dị ka n'èzí ma ọ bụ n'ebe dị elu.

CONNECT TO THE MCS-MAGNUM

Jikọọ eriri oroma Crossover CAT 5 site na MCS-WIRELESS-MODEM na ọdụ ụgbọ mmiri Ethernet na MAGNUM na njedebe nke ọzọ nke eriri USB na ọdụ ụgbọ mmiri LAN na MCS-WIRELESS-MODEM ma ọ bụ MCS-WIRELESS-MODEM-INT.

MCS-Wireless-Modem-FIG- (3)

AKWDKWỌ AKWKWỌ

  1. Push the SIM button with the SIM needle supplied.
  2. Wepụ ihe njide SIM.
  3. Insert your SIM card into the SIM holder. (SIM card is not supplied,
    • Kaadị SIM ga-enwerịrị data na SMS)
    • Lelee ya www.mcscontrols.com for the latest phone carrier for your area that can be used for these modems. See partial list on back.
  4. Wepụ ihe njide SIM azụ n'ime rawụta.
  5. Attach Dual Band Antenna or Mobile and WiFi antennas, depending on installation.
  6. Jikọọ nkwụnye ọkụ na oghere dị n'ihu ngwaọrụ. Wee tinye nsọtụ nke ọzọ nke nkwụnye ọkụ n'ime oghere ọkụ.
    • Mara: MCS-WIRELESS-MODEM or MCS-WIRELESS-MODEM-INT can be powered using a 12vdc power supply (see wiring).
  7. Use the supplied Din Rail mounting kit if installing in an enclosure.

NETWORK ADDRESS ON MCS-MAGNUM

THE IP ADDRESS FOR YOUR NEW MCS-WIRELESS-MODEM HAS BEEN FACTORY SET AND IS SUPPLIED WITH THE UNIT ON THE LABEL OF THE MODEM. YOU MUST SET THE NETWORK ADDRESS ON YOUR CONTROLLER TO MATCH THIS FACTORY ADDRESS.

  1. The MAGNUM is set up for TCP/IP port starting at 5001 ~ 5020.
  2. The IP on your label will show the factory setting for the modem.
  3. When you are installing the Modem you will need to search for the MAGNUM port in the range of 5001 ~ 5020.
  4. If you have multiple MAGNUMs, each MAGNUM must be assigned an IP address different from each other.MCS-Wireless-Modem-FIG- (4)
  5. Each IP address must get forwarded to separate TCP/IP ports. See the diagram for multiple MAGNUMS.
  6. Maka exampLe: 192.168.18.101 will get forwarded to 5001MCS-Wireless-Modem-FIG- (5)

INSTALL OPEN VPN client on your machine

  1. Open a browser on your computer, and go to the link below. https://openvpn.net/vpn-client/
  2. Download the VPN CLIENT and install on your computer.
  3. Attach the USB drive, that was included.
  4. Open the USB drive, drop or drag the supplied file banye na windo a.
  5. Open MCS-CONNECT on your computer.MCS-Wireless-Modem-FIG- (6)
  6. Click on ‘SETUP’ > ‘NETWORK OPTIONS’
  7. MCS-Connect will show a new device in the Network Options screen.MCS-Wireless-Modem-FIG- (7)
  8. Look for the one that says ‘OpenVPN’, and select it.
  9. Now try to connect to the Magnum over Remote Ethernet with the settings below.MCS-Wireless-Modem-FIG- (8)

Ndepụta ebe modems na-arụ ọrụ

Enwere ụfọdụ ndị na-arụ ọrụ nke nwere ihe nrube isi nke ha yana, maka ngwaọrụ nwere ike ịrụ ọrụ na netwọk ụgbọelu ahụ, ọ ga-abụ nke onye na-ebu ya nweta ya. Ndepụta n'okpuru na-egosi ndị na-ebu na-akwado MCS-WIRELESS-MODEM na MCS-WIRELESS-MODEM-INT. Lelee maka ndị na-ebubu ọhụrụ: https://mcscontrols.com/communications.html#wirelessInt.

OZI MKPỌTỤRỤ

Ndị na-ebu mba ụwa

  • Saudi Arabia
    • Carriers: Mobily, STC, Zain
    • UMTS: B1
    • LTE: B1, B3, B38, B40
  • UAE
    • Carriers: DU, ETISALAT
    • UMTS: B1
    • LTE: B3, B7, B20
  • Baharain
    • Carriers: Batelco, Viva, Zain
    • UMTS: B1
    • LTE: B3
  • Qatar
    • Carriers: Ooredoo, Vodafone
    • LTE: B3, B7, B20
  • Jordan
    • Carriers: Orange, Uminiah, Zain
    • UMT: B1
    • LTE: B3
  • Oman
    • Carriers: Omantel, Ooredoo
    • UMTS: B1, B8
    • LTE: B3, B40
  • Kuwait
    • Carriers: Ooredo, Vivo, Zain
    • UMTS: B1
    • LTE: B3, B20
  • Ndị na-ebu na US
    • AT&T, T-MOBILE, mgbịrịgba na VERIZON
    • Pịa maka ozi kachasị ọhụrụ maka nhaziMCS-Wireless-Modem-FIG- (9)
    • MCS-WIRELESS–REV 2.2.
    • Febụwarị 4, 2025 3:28 nke mgbede

Ajụjụ

  • Ajụjụ: Enwere m ike iji ọkụ ọkụ 12V ọ bụla nwere MCS-WIRELESS-MODEM?
    • A: Yes, you can use any 12V DC power supply with the modem.
  • Ajụjụ: Achọrọ m ịwụnye Dual Band Antenna Booster maka nnabata ka mma?
    • A: While not mandatory, using the Dual Band Antenna Booster is recommended for improved reception.

Akwụkwọ / akụrụngwa

MCS Ikuku Modem [pdf] Ntuziaka onye ọrụ
MCS-WIRELESS-MODEM, MCS-WIRELESS-MODEM-INT, Ikuku Modem, Ikuku, Modem

Ntụaka

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *