MBJ CTR-52 njikwa
Ndetu nchekwa
- Emebere ngwaọrụ a maka naanị ime ụlọ.
- Ahụike ga-akwụsịrịrị ngwaọrụ ahụ na isi iyi ike tupu nrụnye na/ma ọ bụ mmezi amalite. Agaghị eji ngwaọrụ a mgbe ọdịda nwere ike imerụ onwe ya ahụ.
- Eletrik Ụlọ ahụ dịpụrụ adịpụ site na ala nke ọkụ eletrik. Agafeta ikike ịrụ ọrụ voltage ma ọ bụ karịa karịa ikike ịgbanwee ugbu a n'otu ọwa nwere ike iduga mbibi nke ngwaọrụ ma ọ bụ na mbelata dị ịrịba ama nke ndụ nke modul ọkụ ọkụ LED ejikọrọ.
- Ngwa igwe eji arụ ọrụ emebere onye njikwa maka ịgbanye ụgbọ okporo ígwè okpu n'elu. Enwere ike iji obere vidiyo kpochie unit ahụ n'ọdụ ụgbọ okporo ígwè dị n'elu. Maka ikpo ọkụ kacha mma, a na-atụ aro anya aka ekpe/nri nke 10mm gaa na nkeji ọzọ.
Ngwakọta igwe
Ọnọdụ LED's CTR-52
| Ikanam | Ọnọdụ | Pụtara |
| LED 1 | Gbanyụọ
ON |
Na-akpalite ala dị ala Na-akpali steeti dị elu |
| LED 2 | Gbanyụọ
ON |
Na-akpalite ala dị ala Na-akpali steeti dị elu |
| LED 3 | Gbanyụọ
ON |
Na-akpalite ala dị ala Na-akpali steeti dị elu |
| LED 4 | Gbanyụọ
ON |
Na-akpalite ala dị ala Na-akpali steeti dị elu |
Ihe mgbaàmà na-akpalite
CTR-52
- Onye ọkwọ ụgbọ ala 4 ọwa LED
- Ọrụ a na-achịkwa ugbu a maka ọkụ ọkụ LED na-achịkwa na-aga n'ihu na nchapụta
- Voltage na-achịkwa ọrụ maka mkpụmkpụ, nkenke na ọkụ ọkụ ọkụ ọkụ dị elu, kpọmkwem
- ọkụ ọkụ si 10µs ruo 100ms
- Njikwa zuru oke site na Modbus TCP/IP
- MS Windows 10® ngwanrọ njikwa dabere na SDK dị
- Njikwa ọkụ kwụ ọtọ site na 'oge ngosi' igwefoto,
- akara 'strobe' ma ọ bụ ntọala flash ntuziaka
- 4 onye na-akpalite ahịrị I/O nwere ọrụ na-agbanwe agbanwe na ọwa LED
- Na-agafe agafe jụrụ na oke okpomọkụ
Njikọ eletrik
| Ntụtụ | Aha Pin | CTR-52 Ọrụ | Ikwu |
| 1 | 24VDC | 24V DC | Ntinye ọkụ |
| 2 | GND | Ala | Ala ọkọnọ ike |
| Aha Pin | Ọrụ | Ikwu | |
| 3 | Tr.1 | Mkpalite1 12-24V 1) | Ejikọtara ọnụ n'ime |
| 4 | Tr.2 | Mkpali2 12-24V | Ejikọtara ọnụ n'ime |
| 5 | Tr.3 | Mkpali3 12-24V | Ejikọtara ọnụ n'ime |
| 6 | Tr.4 | Mkpali4 12-24V | Ejikọtara ọnụ n'ime |
| 7 | Tr. GND | Na-akpali ala | A na-ahụkarị Tr. ala, dịpụrụ adịpụ |
| 8 | - | ejighi ya | |
| 9 | - | ejighi ya | |
| Aha Pin | Waya2) | Mpụta na ìhè | |
| 10 | LED 1+ | nwa + acha anụnụ anụnụ | Ọwa 1 |
| 11 | LED 1-3) | ọcha + aja aja | Ọwa 1 |
| 12 | LED 2+ | nwa + acha anụnụ anụnụ | Ọwa 2 |
| 13 | LED 2-3) | ọcha + aja aja | Ọwa 2 |
| 14 | LED 3+ | nwa + acha anụnụ anụnụ | Ọwa 3 |
| 15 | LED 3-3) | ọcha + aja aja | Ọwa 3 |
| 16 | LED 4+ | nwa + acha anụnụ anụnụ | Ọwa 4 |
| 17 | LED 4-3) | ọcha + aja aja | Ọwa 4 |
| Port | Ọrụ | Ikwu | |
| Eth | RJ45 netwọkụ | Modbus gafere Ethernet |
- Ngosipụta dị elu>=10V, mgbama dị ala <=5V
- Maka eriri njikọ MBJ na ọkụ MBJ LED (-x) na-enweghị njikwa agbakwunyere
- Ejikọla LED (-) na ala mpụga nke ike ọkọnọ ma ọ bụ ala nke mgbama mkpalite! Nke a nwere ike ibibi ọkụ ma ọ bụ ngwaọrụ ejikọrọ
Ụdị ọrụ
Ntọala ụlọ ọrụ CTR-52 nke ọnọdụ ọrụ bụ FLASH. A na-ahọrọ ụdị ọrụ ndị ọzọ site na interface Modbus
| Ụdị | CTR-52 Ọrụ |
| NA -ECHI | Ọkụ na-aga n'ihu, LED na-agbanye mgbe niile |
| AUTO | Mwepụta LED na-esote ọnọdụ mkpalite |
| FLASH1) | Nhazi ntuziaka maka ọkụ, igbu oge na ogologo oge site na protocol Modbus |
| Gbanyụọ | Agbanyụrụ ihe nrụpụta ikanam |
Njikwa Modbus
Akụrụngwa
Ụgbọ ala ọkọlọtọ enyere na ahịrị ngwaahịa njikwa CTR LED dabere na Modbus TCP. Modbus bụ usoro nzikọrịta ozi data maka iji ya na njikwa mgbagha (PLCs).
Ozi nhazi Modbus
Onye njikwa CTR bụ ngwaọrụ Modbus na-enye gị ohere ịnweta ntọala ọkụ site na Ethernet. Onye njikwa na-ekwurịta okwu site na iji usoro nna ukwu-ohu nke naanị otu ngwaọrụ (nna ukwu) nwere ike ịmalite azụmahịa (a na-akpọ ajụjụ). Ngwa ndị ọzọ (ohu) na-aza site na ịnye nna ukwu data achọrọ, ma ọ bụ site n'ime ihe a rịọrọ na ajụjụ a. A na-emejuputa njikwa ọkụ CTR dị ka ohu Modbus. CTR na-enweta ozi sitere n'aka nna ukwu, hazie ha ma zaghachi ha. Ngwaahịa anaghị eziga ozi n'onwe ya
| Ozi nhazi Modbus | |
| Ụdị Modbus: | Ohu (Ihe nkesa) |
| Ụdị Modbus: | TCP nke Modbus |
| Ụdị data mmepụta: | Akpaaka |
Ihe ndetu
- Adreesị IP ngwaọrụ nke ndabara bụ 192.168.0.99. Enwere ike ịgbanwe adreesị site na ngwa ahịrị iwu nyere na ngwugwu ngwanrọ MBJ
- Enwere ike iji bọtịnụ RESET dị n'azụ ngwaọrụ ahụ ịlaghachi na ntọala ntọala ụlọ ọrụ mmepụta ihe
- Biko rụtụ aka na nkọwapụta protocol nkwukọrịta ụgbọ ala maka nkọwa Software
- Enwere ike ịhazi CTR-52 site na ụzọ ọzọ dị iche iche:
- Nnweta Modbus Direct nke enyepụtara nkọwapụta usoro nkọwapụta
- Ọbá akwụkwọ SDK ka itinye nzikọrịta ozi na ngwanrọ gị
- Ọ dị mfe iji MBJ onye ọrụ ngwanrọ dabere na MS Windows 10®
- Maka ozi ndị ọzọ na nbudata nke ngwa ngwanrọ CTR-52 gaa na: www.mbj-imaging.com/en/products/led-controller
Nkọwapụta
- LED ugbu a na-erughị 100mA nwere ike ime ka ọkụ ọkụ ọkụ ọkụ
- A na-enye ike ọkụ site na capacitor ma chọọ oge zuru oke maka ịchaji. Ike ọkụ (oge ọkụ * oge ọkụ * dị ugbu a) bụ naanị 1A. Ọmụmaatụ: 100 ọkụ/s * 100µs * 30A = 0.3A
- Nke dị elu nke ugbu a na oge okirikiri dị mkpụmkpụ, nke ukwuu nwere ike ịdị ukwuu
Nkọwapụta CTR-52 Oke eletrik Nrụ ọrụ Voltage 24V DC / 4A 12V-26V, nkeji. 2V n'elu n'ihu voltage nke isi iyi ọkụ LED
LED na-ada ada ugbu a1) (NA & AUTO mode)
1 ọwa: 1800mA 2 Channel: 1500mA p. Ọwa 3 Channel: 1200mA p. Ọwa 4 Channel: 900mA p. Ọwa
Flash flash ugbu a 2) 100mA…21A Ogologo oge nke obere flash 10µs dabere na ebe ọrụ LED na okirikiri ọrụ
Oke. oge flash 59s Oke. flash latency3) 3µs Oge Flash & igbu oge: kacha nta mgbanwe nzọụkwụ
1µs Voltage nso maka LED modul ihe ruru. 2.5V ruo 22V Mechanical paramita Akụkụ (H x W x D) 53mm x 80mm x 93mm Ibu 220g Njikọ 1x 2 Kọntaktị nkwụnye ntụtụ (RM5.08), 1x 7 Kọntaktị nkwụnye (RM3.81), 4 x 2 Pin inv. nkwụnye kọntaktị (RM3.81)
1 x RJ45 Ethernet
Asambodo CE, RoHS Ọkwa nke nchebe IP20 (nke emere maka kabinet njikwa) iru mmiri 30% ruo 70% Ọnọdụ okpomọkụ na-arụ ọrụ 10°C ruo 30°C Ngwa ngwa Mpempe mgbanaka ụgbọ okporo ígwè dị n'elu na plọg (n'ókè nke delivery). Maka eriri, mgbago na modul ọkụ biko lelee www.mbj-imaging.com
Ngwa Samples maka CTR-52 Controller
Akwụkwọ / akụrụngwa
 |
MBJ CTR-52 njikwa [pdf] Akwụkwọ ntuziaka onye ọrụ Onye njikwa CTR-52, CTR-52, Onye njikwa |
