Ntuziaka onye ọrụ M5STACK M5FGV4 Flow Gateway

Ọnụ ụzọ Flow bụ ngwaọrụ dị iche iche nwere ikike nkwukọrịta dị iche iche na ihe mmetụta, emebere maka ntinye enweghị nkebi n'ime ọrụ gị. Ọ nwere ihuenyo mmetụ aka IPS 2.0-inch capacitive, ọtụtụ oghere nkwukọrịta, sensọ, na nhọrọ njikwa ike.

Ike nzikọrịta ozi

Isi njikwa: ESP32-S3FN8

Nkwukọrịta ikuku: Ọrụ Wi-Fi, BLE, Infrared (IR).
Interface ụgbọ ala CAN: Oghere anọ na-akwado nzikọrịta ozi ọtụtụ ngwaọrụ

GPIO pins na interface mmemme

Ọdụ ụgbọ mmiri Grove: Port A: I2C Interface, Port B: UART Interface, Port C: ADC Interface

Oghere TF Kaadị: Maka nchekwa gbasaa
Interface onboard: Ụdị-C maka mmemme na nzikọrịta ozi

Njikwa Ike

Chip njikwa ike: AXP2101 nwere ọwa njikwa ike eruba anọ

Ịnye ọkụ: Mpụga DC 12V (na-akwado 9 ~ 24V) ma ọ bụ batrị lithium 500mAh dị n'ime (M5Go2 Base)
Nhazi oriri ike dị ala

Nhazi ụda

Chip Decoder Audio: ES7210 nwere ntinye igwe okwu abuo

AmpChip ihe owuwu: 16-bit I2S AW88298
Ọkà okwu arụnyere n'ime ya: Ọkà okwu ntụkwasị obi dị elu 1W

Njirimara anụ ahụ

Akụkụ anụ ahụ: 60.3 * 60.3 * 48.9mm

Arọ: 290.4g
Bọtịnụ: Bọtịnụ ike nọọrọ onwe ya na bọtịnụ nrụpụta (RST) nwere sekit igbu oge

Ntuziaka ojiji ngwaahịa

Mmalite ngwa ngwa – Nyochaa ozi Wi-Fi

Mepee Arduino IDE (tụ aka Ntuziaka nwụnye Arduino IDE)

Pịa ma jide bọtịnụ Tọgharia, wee fanye eriri
Họrọ bọọdụ M5CoreS3 na ọdụ ụgbọ mmiri kwekọrọ, wee bulite koodu ahụ

Mepee ihe nleba anya nsonazụ ka igosipụta WiFi enyochagoro yana ozi ike mgbama

Mmalite ngwa ngwa – Nyochaa ozi ngwaọrụ BLE

1. Mepee Arduino IDE (tụ aka Ntuziaka ntinye IDE Arduino)

Biko hụ na ị na-agbaso ntuziaka nke ọma maka ịrụ ọrụ nke ọma nke ọnụ ụzọ Flow.

Ajụjụ a na-ajụkarị

Ajụjụ: Kedu ka m ga-esi chajịa batrị lithium dị n'ime?
- A: Iji chajịa batrị lithium dị n'ime, jikọọ ngwaọrụ na isi iyi ike DC dị n'èzí site na iji eriri Ụdị-C enyere.
Ajụjụ: Enwere m ike ịgbasa ikike nchekwa nke ọnụ ụzọ Flow?
- A: Ee, ị nwere ike ịgbasa ikike nchekwa site na ịtinye kaadị TF n'ime oghere kaadị TF raara onwe ya nye na ngwaọrụ ahụ.
Ajụjụ: Gịnị bụ ọrụ akwadoro voltage maka Flow Gateway?
- A: The Flow Gateway na-akwado ihe mpụga DC ike ọkọnọ nke 12V (nso: 9 ~ 24V) ma ọ bụ nwere ike kwadoro site n'ime 500mAh batrị lithium.

MỤTA

Ọnụ ụzọ Flow bụ modul mgbasawanye multifunctional dabere na onye ọbịa M5CoreS3, na-ejikọta oghere ụgbọ ala 4 CAN na ọtụtụ maapụ GPIO, na-enye ikike mgbasawanye siri ike maka njikwa ụlọ ọrụ na ngwa IoT. Emebere modul ahụ n'obi dị mfe, na-akwado stacking enweghị nkebi na ngwaọrụ usoro M5Stack. Ọ na-egosipụtakwa njikwa ike arụnyere arụnyere na ọrụ mgbasawanye I2C, na-eme ka ọ dị mma maka ọnọdụ dị mgbagwoju anya chọrọ nkwurịta okwu ọtụtụ ngwaọrụ na njikwa ziri ezi.

Ọnụ ụzọ ámá

Ike nzikọrịta ozi:
- Onye njikwa isi: ESP32-S3FN8
- Nkwukọrịta ikuku: Wi-Fi, BLE, ọrụ infrared (IR).
- Interface ụgbọ ala anọ CAN: Na-akwado nzikọrịta ozi ọtụtụ ngwaọrụ
Ihe nhazi na arụmọrụ:
- Ụdị nhazi: Xtensa LX7 (ESP32-S3FN8)
- Ike nchekwa: 16MB Flash, 8MB PSRAM
- Ugboro na-arụ ọrụ nhazi: Xtensa® dual-core 32-bit LX7 microprocessor, ruo 240 MHz
Ngosipụta na ntinye:
- Ihuenyo: 2.0-inch capacitive touch IPS ihuenyo na elu-ike iko panel
- Sensọ mmetụ: GT911 maka njikwa mmetụ ziri ezi
- Igwefoto: 0.3-megapixel GC0308
- Ihe mmetụta nso: LTR-553ALS-WA
Ihe mmetụta:
- Accelerometer na Gyroscope: BMI270
- Magnetometer: BMM150
- Ezigbo oge elekere (RTC): BM8563EMA
GPIO pins na interface mmemme:
- Ọdụ ụgbọ mmiri Grove:
- Port A: I2C Interface
- Port B: UART interface
- Port C: ADC Interface
- Oghere kaadị TF: Maka nchekwa gbasaa
- Onboard Interface: Ụdị-C maka mmemme na nzikọrịta ozi

Njikwa Ike:
- Chip njikwa ike: AXP2101 nwere ọwa njikwa ọkụ anọ
- Nkwanye ike: DC 12V mpụga (na-akwado 9 ~ 24V) ma ọ bụ batrị lithium 500mAh dị n'ime (M5Go2 Base)
- Nhazi oriri ike dị ala
Nhazi ụda:
- Chip Decoder Audio: ES7210 nwere ntinye igwe okwu abụọ
- Ampmgbawa ọkụ: 16-bit I2S AW88298
- Ọkà okwu arụnyere n'ime: 1W ọkà okwu ntụkwasị obi dị elu
Njirimara anụ ahụ:
- Akụkụ anụ ahụ: 60.3 * 60.3 * 48.9mm
- Arọ: 290.4g
- Bọtịnụ: bọtịnụ ike nọọrọ onwe yana bọtịnụ nrụpụta (RST) nwere sekit igbu oge

Nkọwapụta

Nha modul

Ngwa ngwa ngwa

Tupu ịme usoro a, lelee ederede dị na mgbakwunye ikpeazụ: Ịwụnye Arduino

Bipụta ozi WiFi

Mepee Arduino IDE (tụ aka https://docs.m5stack.com/en/arduino/arduino_ide maka ntuziaka nrụnye maka bọọdụ mmepe na ngwanrọ)
Pịa ma jide bọtịnụ Tọgharia, wee fanye eriri

Họrọ bọọdụ M5CoreS3 na ọdụ ụgbọ mmiri kwekọrọ, wee bulite koodu ahụ
Mepee ihe nleba anya nsonazụ ka igosipụta WiFi enyochagoro yana ozi ike mgbama

Ngwa ngwa ngwa

Tupu ịme usoro a, lelee ederede dị na mgbakwunye ikpeazụ: Ịwụnye Arduino

Bipụta ozi BLE

Mepee Arduino IDE (tụ aka https://docs.m5stack.com/en/arduino/arduino_ide maka ntuziaka nrụnye maka bọọdụ mmepe na ngwanrọ)

Pịa ma jide bọtịnụ Tọgharia, wee fanye eriri
Họrọ bọọdụ M5CoreS3 na ọdụ ụgbọ mmiri kwekọrọ, wee bulite koodu ahụ
Mepee ihe nleba anya n'usoro iji gosi ozi ike mgbama BLE enyochagoro

Nkwupụta FCC

FCC ịdọ aka ná ntị

Akpachara anya FCC:

Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ọrụ ahụ.

Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:

Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana

Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.

IHE dị mkpa:

Mara: A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ Klas B, dabere na akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ.

Akụrụngwa a na-ewepụta, na-eji ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka ahụ siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:

Megharịa ma ọ bụ bugharịa antenna nnata.
Mee ka nkewa dị n'etiti akụrụngwa na onye nnata.

Jikọọ akụrụngwa na ntinye na sekit dị iche na nke ejikọrọ onye nnata.
Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.

Nkwupụta Mkpughe FCC Radiation:

Ngwa a na-akwado oke ikpughe radieshon FCC nke edobere maka gburugburu ebe anaghị achịkwa ya. Ekwesịrị ịwụnye akụrụngwa a ma rụọ ọrụ ya na opekempe 20cm n'etiti radiator & ahụ gị

Wụnye Arduino

Ịwụnye Arduino IDE(https://www.arduino.cc/en/Main/Software) Pịa ileta onye ọrụ Arduino websaịtị, wee họrọ ngwungwu nwụnye maka sistemụ arụmọrụ gị ibudata.
二. Ịwụnye Arduino Board Management

Onye njikwa Board URL a na-eji iji depụta ozi bọọdụ mmepe maka otu ikpo okwu. Na Arduino IDE menu, họrọ File -> Mmasị
Detuo njikwa bọọdụ ESP URL n'okpuru n'ime Mgbakwunye Board Manager URLs: ubi, ma chekwaa.
https://espressif.github.io/arduino-esp32/package_esp32_dev_index.json
Na sidebar, họrọ Board Manager, chọọ ESP, wee pịa Wụnye

Na sidebar, họrọ Board Manager, chọọ M5Stack, wee pịa Wụnye. Dabere na ngwaahịa ejiri, họrọ bọọdụ mmepe kwekọrọ n'okpuru Ngwaọrụ -> Board -> M5Stack -> {M5CoreS3}
Jikọọ ngwaọrụ gị na kọmputa na a data USB bulite mmemme