Wepụ ihe ebudatara file and run [ OBS Plugin and Dockable
Controller.exe ] to start the installation.
Follow the on-screen instructions provided by the installation
ọkachamara.

Once installation is complete, click [ Finish ].

2.2 Wụnye na Mac

Budata OBS-Studio software ma wụnye ya na Mac gị.

Download OBS Plugin & Dockable Controller software from the
Lumens websaịtị.
Click [ OBS Plugin and Dockable Controller.pkg ] to
tinye.

Chapter 3: Start Using

3.1 Kwenye ntọala netwọkụ

To ensure the computer is on the same network segment as the
camera, follow the setup below:

Igwefoto

eriri Ethernet
Gbanwee ma ọ bụ rawụta

Kọmputa

3.2 Set video source from OBS-Studio

Open OBS Studio software.

Add a video source by clicking +.
Select [VLC Video Source].

Name the video source and click [ OK ].
In the Properties page, click + then select [ Add Path/URL
].

Enter the RTSP stream URL and click [ OK ].

Ajụjụ A na-ajụkarị (FAQ)

Q: What are the system requirements for using the OBS Plugin
& Dockable Controller?

A: The system requirements are Windows 7/10 or
Mac 10.13 or above. Additionally, OBS-Studio version 25.08 or above
ihe achọrọ.

Q: How do I install the software on a Windows PC?

A: To install on Windows, download OBS-Studio
software and the OBS Plugin & Dockable Controller software from
the Lumens websaịtị. Gbaa nwụnye file ma soro nke
on-screen instructions provided by the wizard.

Q: How can I set the video source from OBS-Studio?

A: To set the video source, open OBS Studio,
add a video source, select VLC Video Source, name the source, add
the RTSP stream URL in the Properties page, and click OK to
gosi.

View Fullscreen

OBS Plugin & Dockable Controller User Manual – English

Tebulu ọdịnaya
Chapter 1 System Requirements …………………………………………………… 2
1.1 System Requirements ……………………………………………………………………..2 1.2 Software Requirement ……………………………………………………………………..2
Chapter 2 Install OBS Plugin & Dockable Controller ………………………. 3
2.1 Install with Windows 7 / 10 ……………………………………………………………………….3 2.2 Install with Mac …………………………………………………………………………………………3
Chapter 3 Start Using …………………………………………………………………… 4
3.1 Confirm Network Setting………………………………………………………………………………… 4 3.2 Set video source from OBS-Studio ………………………………………………………………. 4 3.3 How to use Lumens OBS Plugin to control camera ……………………………………. 8 3.4 How to use Lumens OBS Dockable to control camera …………………………….. 11
Chapter 4 Operation Interface Description …………………………………… 15
4.1 OBS Plugin ……………………………………………………………………………………………………. 15 4.2 OBS Dockable ………………………………………………………………………………………………. 20
Copyright Information…………………………………………………………………… 22
1

Isi nke 1 System chọrọ
1.1 System chọrọ
Windows 7 / 10 Mac 10.13 or above
1.2 Ngwa ngwa chọrọ
OSB-Studio 25.08 ma ọ bụ karịa
2

Chapter 2 Install OBS Plugin & Dockable Controller
2.1 Install with Windows 7 / 10
1. Please download OBS-Studio software and install it on your computer.
Please download OBS Plugin & Dockable Controller software from the Lumens websaịtị.
2. Wepụta ihe file downloaded and then click [ OBS Plugin and Dockable Controller.exe ] to install.
The installation wizard will guide you through the process. Please follow the on-screen instructions for the next step.
When the installation is completed, press [ Finish ] to end the installation.
2.2 Wụnye na Mac
1. Please download OBS-Studio software and install it on your Mac. 2. Please download OBS Plugin & Dockable Controller software from the Lumens
website. 3. Click [ OBS Plugin and Dockable Controller.pkg ] to install.
3

Isi nke 3 Malite Iji
3.1 Kwenye ntọala netwọkụ
To confirm the computer is on the same network segment as the camera.

Igwefoto

eriri Ethernet
Gbanwee ma ọ bụ rawụta

Kọmputa

3.2 Set video source from OBS-Studio
1. Click [ OBS Studio ] icon to open the software.

2. Click “+” to add a video source. 3. Select [VLC Video Source].
5

4. Give a name to the video source and click [ OK ]. 5. In Properties page, select “+” then select [ Add Path/URL ].
6

6. Key in the RTSP stream URL then click [ OK ].
RTSP connection address formats are as follows: RTSP Main Streaming (4K@H.265)=> rtsp://camera IP:8554/hevc RTSP Sub1 Streaming (1080P@H.264)=> rtsp://camera IP:8557/h264 RTSP Sub2 Streaming (720P@H.264)=> rtsp://camera IP:8556/h264
7. Select RTSP URL on the Playlist then click [ OK ].
7

8. The stream will be displayed on the OBS-Studio.
3.3 How to use Lumens OBS Plugin to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Select [ Tools ] => [ Lumens OBS Plugin ] 8

2. Lumens OBS Plugin window will be displayed. 3. Select [ Settings ] => [ Camera Assign] 9

Press [ Search ] to find IP cameras from the same network. Select a Camera you would like to control from IP Camera List. Select the Camera No. You can change the Camera name. Click [ Apply ] and close Camera Assign window.

5 1

2
4. Select set Camera from Select Camera tab, Camera Control setting will be enable. Now you can control the camera via Lumens OBS plugin.

3.4 How to use Lumens OBS Dockable to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Họrọ [ View ] => [ Docks ] => [ Custom Browser Docks… ] 2. Custom Browser Docks window will be displayed.
11

3. Enter the Dock Name & URL Dock NameGive a name to the customized dock. URL: Detuo njikọ dock sample ma mado ya n'ubi.
Maka URL information, please find the installed folder of Dockable Controller. Normally the folder would be following path:
C: Mmemme Filesobs-studioLumensOBSPluginDockable Controller The part circled in the red box below is the dock samples.
4. Open the dock sample by browser and copy the URL.
12

5. Fill in the DockName, paste avove URL to custom browser docks window and then click [ Apply ].
6. Customized dock window will be displayed and you can merge it with OBS-Studio software.
13

7. Click [ PERFEREMCES ] to key in the IP address of the camera you would like to control and click [ Connect ].
8. After connecting, a pops windows will show the camera is connected. 9. Now you can use Lumens dockable to control the IP camera.
14

Isi nke 4 Nkọwa Interface Ọrụ
4.1 OBS Plugin
4.1.1 Isi

Mba

Ihe

1 Ntọala

2 View

3 Enyemaka

Họrọ igwefoto

Nkọwa ọrụ
Settings options: Camera assign: Enter the camera setting. Please refer to 4.1.2
Settings-Camera Assign Use HotKeys: When checked, prompt window will pop up: Need to set HotKeys
in OBS.
Ị nwere ike pịa [File]=>[Setting]=>[HotKeys] on OBS-studio to set. PanTilt limit: Enter PanTilt limit setting. Please refer to 4.1.3 Settings- PanTilt
limit Preset rename: Enter Preset rename setting. Please refer to 4.1.4 Settings-
Preset rename Close: Close Lumens OBS Plugin.
View options: Simple mode Advance mode: please refer to 4.1.5 View- Advance mode
Show about us information.
Select the camera number you want to control. Need to set from [ Settings ] => [ Camera assign ] first.
15

If the connection fails, a message window will pop up.

5 Oke mbugharị

Adjust the zoom-in or zoom-out ratio via the slider bar.

Ntọala Pan / Tilt

7 Lekwasị anya

Adjust the Pan/Tilt position of the camera screen.
Select MF(manual) / AF(automatic) focus. The focusing range is adjustable when the focus mode is set to “Manual”.

8 Preset setting Select the number first and then select [ STORE ] or [ CALL ].

4.1.2 Settings-Camera Assign

Mba

Ihe

Nkọwa ọrụ

1 adreesị IP

You can apply the IP of the IP Camera list or manually enter the IP.

2 Camera No.

Select Camera 1~8

3 Aha igwefoto

Manually edit the camera name.

4 Tinye

Click to apply settings.

5 Chọọ

Click to search for Lumens PTZ Camera, click in the IP Camera list and IP will fill in the IP Address box.

6 IP Camera List

List the searched Camera IP and Camera ID after click search button.

<Remark>Lumens OBS plug-in CANNOT auto-discover Lumens NDI cameras. Please manually add Lumens NDI models via IP address.

4.1.3 Settings- PanTilt limit

1 2

Mba

Ihe

1 PanTilt limit

2 PanTilt limit setting

3 PTZ Speed Comp

Nkọwa ọrụ
Switch button to enable/disable PanTilt limit setting.
Set PanTilt limit position. Switch button to enable/disable the Pan/Tilt speed vary with the position of the Zoom. <Caution> Don’t support VC-A50P and VC-BC series.

4.1.4 Settings- Preset rename

Nkọwa
You can edit the Preset name and click [ Apply ] to save settings.
17

4.1.5 View- Advance mode
1
2

3 4

Mba

Ihe

1 PTZF Speed

2 Nkpughe

3 Ọcha ọcha

Nkọwa ọrụ
Adjust the moving speed of Pan/Tilt/Zoom/Focus/Preset. Exposure Mode: Select exposure mode (Auto/Manual) Shutter speed: The shutter speed is adjustable when the exposure mode
is set to “Manual”. Iris: The size of aperture is adjustable when the exposure mode is set to
“Manual”. Gain: The gain limit is adjustable when the exposure mode is set to
“Manual”. Scene Mode: Select Scene mode(Low Light/Indoor/Backlight/Motion)

Ọnọdụ ngosi

Shutter speed Iris Gain

1/30(1/25) 1/60(1/50)

F2.0

F3.2

33dB

24dB

1/120 F4.5 21dB

<Remark>VC-A50P does not support Gain

White Balance Mode: Select the White Balance mode.

Akpaaka (4000K~7000K)

Ime ụlọ (3200K)

Outdoor (5800K)

1/180 F3.2 27dB

4 Foto

One Push Manual (R Gain +/- ; B Gain +/- ) R/B Gain: Manually adjust blue/red gain value. One Push: One push WB will be trigger when the white balance mode is set to “One Push”. Image Mode: Select the Image mode (Default/Custom) When the image mode is set to Custom, following items can be adjusted Sharpness: Adjust the sharpness of the image. Saturation: Saturation adjustment of the image. Hue: Adjust the hue. Gamma: Gamma Level adjustment. Dig-Effect: Set the mode at which the image is turned. (OFF/MIRROR/FLIP/MIRROR+FLIP)

4.2 OBS Dockable
4.2.1 Control window
2 4

1 3

Mba

Ihe

1 Aha igwefoto

Nkọwa ọrụ
Show the camera name you are controlling. Move the camera into the position you want and click the preset button you want to assign.

2 ASSIGN PRESETS

3 PREFERENCES 4 Preset Controller 5 Zoom 6 Focus 7 Pan/Tilt/Home

Please refer to 4.2.2 PREFERENCES Press the button to execute Preset Recall. Adjust the zoom-in or zoom-out. Adjust the focus range. Adjust the Pan/Tilt/Home position of the camera screen.

4.2.2 PERFERENCES
1 2 3 4
5

Mba

Ihe

1 adreesị IP

2 Aha igwefoto

3 bọtịnụ ntọala
4 Speed 5 Initial Position

Nkọwa ọrụ
Enter the IP address the Camera and click [Connect] button.
Modify the camera name. (Default: Camera01) Camera names are limited to 1 – 12 characters. Please use a camera name by mixing uppercase and lowercase letters or numbers. Do not use “/” and “space” or special symbols. Press buttons to switch the mode. Mirror- On/Off Filp- On/Off Motionless Preser- On/Off Focus- Manual/Auto Adjust the moving speed of Pan/Tilt/Zoom/Focus. Select the initial position. ( Last MEM / 1st Preset)

Ozi nwebisiinka
Nwebiisinka © Lumens Digital Optics Inc. Ikike niile echekwabara. Lumens bụ ụghalaahịa nke Lumens Digital Optics Inc na-edebanye aha ugbu a. Na-edegharị, na-ekegharị ma ọ bụ na-ebufe nke a. file Agaghị anabata ma ọ bụrụ na Lumens Digital Optics Inc enyeghị ikike ma ọ bụrụ na iṅomi nke a file bụ maka ebumnuche ndabere mgbe ịzụrụ ngwaahịa a. Iji nọgide na-emeziwanye ngwaahịa ahụ, ozi dị na nke a file ga-agbanwe agbanwe na-enweghị ọkwa mbụ. Iji kọwa nke ọma ma ọ bụ kọwaa otu esi eji ngwaahịa a, akwụkwọ ntuziaka a nwere ike na-ezo aka na aha ngwaahịa ma ọ bụ ụlọ ọrụ ndị ọzọ na-enweghị ebumnuche ọ bụla nke ịda iwu. Disclaimer nke akwụkwọ ikike: Lumens Digital Optics Inc. abụghị onye na-ahụ maka nkà na ụzụ ọ bụla nwere ike, njehie ndetu ma ọ bụ mwepu, ma ọ bụ na-ahụ maka mmebi ọ bụla ma ọ bụ ihe ọ bụla metụtara ya sitere n'inye nke a. file, iji, ma ọ bụ arụ ọrụ ngwaahịa a.
22

Akwụkwọ / akụrụngwa

Lumens OBS Plugin and Dockable Controller [pdf] Akwụkwọ ntuziaka onye ọrụ
OBS Plugin and Dockable Controller, Plugin and Dockable Controller, Dockable Controller, Controller

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Lumens OBS Plugin and Dockable Controller User Manual

OBS Plugin and Dockable Controller

Ozi ngwaahịa

Nkọwapụta

Ntuziaka ojiji ngwaahịa

Chapter 2: Install OBS Plugin & Dockable Controller

2.1 Install with Windows 7 / 10