LUMEL RE11 Akwụkwọ ntuziaka onye nwe okpomọkụ
echekwabara nchekwa
Koodu nchekwa, akara na ntuziaka niile metụtara nchekwa nke pụtara n'akwụkwọ ntuziaka a ma ọ bụ na akụrụngwa ga-agbasorịrị nke ọma iji hụ na nchekwa nke ndị ọrụ yana ngwa.
Ọ bụrụ na ejikwaghị akụrụngwa ahụ n'ụzọ akọwapụtara nke onye nrụpụta, ọ nwere ike imebi nchekwa nke akụrụngwa na-enye.
Gụọ ntuziaka zuru ezu tupu echichi na ọrụ nke unit.
Ịdọ aka ná ntị : Ihe ize ndụ nke ujo eletrik.
Ntuziaka WIRING
Ịdọ aka ná ntị:
- Iji gbochie ihe ize ndụ nke inye ọkụ eletrik na akụrụngwa a ga-akwụsịrịrị mgbe ị na-eme nhazi wiring. Emetụla ọnụ ọnụ ebe a na-enye ike.
- Iji kpochapụ nnyonye anya electromagnetic jiri obere waya nwere ọkwa zuru oke; a ga-eme ntụgharị nke otu nha nha nha. Maka ahịrị mgbama ntinye na mmepụta, jide n'aka na ị na-eji wires echedoro ma debe ha n'ebe ibe gị nọ.
- Cable eji maka njikọ na isi iyi ọkụ, ga-enwerịrị akụkụ obe 2 nke 1mm ma ọ bụ karịa. Waya ndị a ga-enwe ike mkpuchi ma ọ dịkarịa ala 1.5kV.
- Mgbe ị na-agbatị wires ndị na-eduzi thermocouple, na-eji waya akwụ ụgwọ thermocouple mgbe niile maka wiring. Maka ụdị RTD, jiri ihe wiring nwere obere nguzogide ndu (5Ω max kwa ahịrị) na enweghị ihe mgbochi dị iche n'etiti wires atọ.
- Enwere ike ịtụ anya mmetụta mgbochi mkpọtụ ka mma site na iji eriri ọkọlọtọ ọkọlọtọ maka akụrụngwa.
Nkwadebe
- Ekwesịrị ịsacha ngwa ahụ mgbe niile ka ọ ghara igbochi akụkụ ikuku ikuku.
- Jiri akwa dị nro dị ọcha hichaa akụrụngwa. Ejila mmanya Isopropyl ma ọ bụ ihe nhicha ọ bụla ọzọ.
Nkọwapụta
|
Ngosipụta |
Ọnụọgụ anọ (Ọcha) + 4 mkpụrụ (Green) Ngosipụta ịdị elu:-
Ngosipụta ọcha: - 15.3 mm Akwụkwọ ndụ akwụkwọ ndụ: - 8 mm Ngosipụta dijitalụ akụkụ 7 |
|
Ihe ngosi LED |
1 : Mpụta 1 ON
2 : Mpụta 2 NA T: Dezie S: Oge obibi |
| Igodo | 3 igodo maka ntọala dijitalụ |
| Ntinye nkọwa | |
| Nbanye Nbanye | Thermocouple (J, K, T, R, S) / RTD (PT100) |
| Sampogologo oge | 250 mk |
| Ntinye ntinye (FTC) | 0.2 ruo 10.0 sk |
| Mkpebi | 0.1 / 1 ° maka ntinye TC/RTD
(Edobere 1° maka ntinye TC ụdị R & S) |
| Ngalaba okpomọkụ | oC / °F enwere ike ịhọrọ |
|
Ngosipụta ziri ezi |
Maka ntinye TC: 0.25% nke F. S ±1°C
Maka ntinye R & S: 0.5% nke F. S ± 2°C (Nkeji 30 nke oge ikpo ọkụ maka ntinye TC) Maka ntinye RTD: 0.1% nke F. S ±1°C |
| NKWUO GBASARA YA | |
|
Usoro njikwa |
1) njikwa PID na akpaaka ma ọ bụ nlegharị anya onwe
2) njikwa ON-OFF |
| Oke Band (P) | 1.0 ruo 400.0°C, 1.0 ruo 752.0°F |
| Oge mmekọ (I) | 0 ruo 9999 sk |
| Oge mmepụta (D) | 0 ruo 9999 sk |
| Oge okirikiri | 0.1 ruo 99.9 sk |
| Obosara Hysteresis | 0.1 ruo 99.9 Celsius |
| Ngụ oge obibi | 0 ruo 9999 min |
| Uru Tọgharia akwụkwọ ntuziaka | -19.9 ruo 19.9°C /°F |
| Nkọwa PID dị jụụ | |
| Usoro njikwa | PID |
| Oke Band-Cool | 1.0 ruo 400.0 Celsius
1.0 ruo 752.0°F |
| Oge okirikiri-dị jụụ | 0.1 ruo 99.9 sk |
| Band nwụrụ anwụ | SPLL ka SPHL (Programmable) |
| Nkọwapụta Mpụta | |
| Mbupute njikwa (Relay ma ọ bụ onye ọrụ SSR nwere ike ịhọrọ) | Kọntaktị na-agbagharị agbagharị: 5A resistive@250V AC / 30V DC SSR mbanye mmepụta (Vol)tage Pulse): 12V DC, 30mA |
| Mbupụta inyeaka | Kọntaktị ọsọ ọsọ: 5A resistive@250V AC / 30V DC |
| NKWUO NKE IKE IKE | |
| Tụkwasịnụ Voltage | 85 ruo 270V AC / DC (AC: 50/60 Hz) |
| Oriri ike | 6 VA max @ 270V AC |
| Okpomọkụ | Na-arụ ọrụ: 0 ruo 50C Nchekwa: -20 ruo 75°C |
| iru mmiri | 95% RH (na-abụghị condensing) |
| Ibu | 116 g |
Ntuziaka ntinye
- Ngwá ọrụ a, nke a na-arụ n'ụdị, na-aghọkarị akụkụ nke isi njikwa njikwa na n'ọnọdụ dị otú ahụ, njedebe anaghị anọgide na-enweta onye ọrụ njedebe mgbe echichi na eriri ime.
- Ekwela ka mpempe ígwè, nchichi waya, ma ọ bụ ihe ndochi dị mma sitere na nrụnye banye ngwaahịa a ma ọ bụ ọzọ ọ nwere ike bute ihe egwu nchekwa nke nwere ike tinye ndụ n'ihe egwu ma ọ bụ bute ujo eletrik nye onye ọrụ.
- A ga-etinyerịrị ihe mgbanye sekit ma ọ bụ mgba ọkụ ọkụ n'etiti isi iyi ọkụ na ọdụ ọkọnọ iji kwado ọrụ 'ON' ma ọ bụ ' Gbanyụọ'. Otú ọ dị, a ghaghị ịwụnye mgba ọkụ ma ọ bụ ihe nkwụsịtụ a n'ọnọdụ dị mma nke onye ọrụ na-enweta ya.
- Jiri ma chekwaa ihe njikwa okpomọkụ n'ime oke ọnọdụ okpomọkụ na iru mmiri akọwapụtara dịka ekwuru na ntuziaka a.
kpachara anya
- Mgbe ị na-agbanye ọkụ na nke mbụ, kwụpụ njikọ mmepụta.
- Nchedo Fuse: A na-enyekarị unit ahụ na-enweghị mgba ọkụ na fuses. Mee wiring ka etinye fiusi n'etiti igwe ọkụ ọkụ ọkụ na onye njikwa. (2 pole breaker fuse - rating: 275V AC, 1A maka eletriki eletrik ka akwadoro nke ukwuu)
- Ebe ọ bụ na nke a bụ ihe arụnyere n'ụdị akụrụngwa (na-achọta ebe na isi njikwa njikwa), ọnụ ahịa mmepụta ya na-ejikọta ya na akụrụngwa nnabata. Ngwa ndị dị otú ahụ ga-agbasokwa isi EMI/EMC yana ihe nchekwa ndị ọzọ dị ka EN61326-1 na EN 61010 n'otu n'otu.
- A na-ezute mkpochapụ ọkụ nke akụrụngwa site na oghere ikuku nke enyere na chassis nke akụrụngwa. A gaghị egbochi oghere ikuku ikuku dị otú ahụ ma ọ bụghị ya nwere ike ibute ihe egwu nchekwa.
- A ga-ebunye ọnụ ahịa mmepụta nke ọma na ụkpụrụ / oke akọwapụtara nke onye nrụpụta.
Egwunye igwe
- Kwadebe mbelata panel ahụ na nha kwesịrị ekwesị dị ka egosiri n'elu.
- Tinye unit ahụ n'ime panel site n'enyemaka nke clamp nyere.
- Akụrụngwa dị na steeti etinyere ya agaghị abịaru nso nso ebe ikpo ọkụ ọ bụla, vapors caustic, mmanụ, uzuoku ma ọ bụ ngwa ngwaahịa ndị ọzọ achọghị.
- Jiri ọnụ ụzọ crimp akọwapụtara nke ọma (skru M3.5) iji waya ngọngọ ọnụ. Mechie kposara na ngọngọ njedebe site na iji ike na-eme ka ike sie ike n'ime oke nke 1.2 Nm.
- Ejikọtala ihe ọ bụla na ọnụ ọnụ ejighi ya.
Ntuziaka EMC
- Jiri eriri ntinye ike nke ọma nwere njikọ kacha nso yana ụdị gbagọrọ agbagọ.
- Nhazi nke eriri njikọ agaghị adị na isi EMI ọ bụla dị n'ime.
Njikọ Ibu Ibu
- Ndụ ọrụ nke relays mmepụta na-adabere na ikike ngbanwe na ọnọdụ mgbanwe. Tụlee ọnọdụ ngwa n'ezie ma jiri ngwaahịa ahụ n'ime ogo ogo na ndụ ọrụ eletrik.
- Ọ bụ ezie na a na-edepụta mmepụta relay na 5 amps ọ dị mkpa mgbe niile iji interposing relay ma ọ bụ kọntaktị nke ga-agbanwe ibu. Nke a na-ezere mmebi nke onye na-ahụ maka njikwa ma ọ bụrụ na mmejọ dị mkpụmkpụ na-etolite na sekit mmepụta ike.
- Na-eji ihe dị iche iche fused mgbe niile maka "ike ibu sekit" na anaghị ewere nke a na ndụ na-anọpụ iche ọnụ na-enye ike na njikwa.
echekwabara ọkụ n'oge eji
Mkpọtụ ọkụ eletrik nke a na-enweta site na ngbanwe nke ibu na-emepụta ihe nwere ike ịmepụta ọgba aghara nwa oge, ngosi na-adịghị agbanwe agbanwe, nkwụsịtụ, mfu data ma ọ bụ mmebi ngwaọrụ na-adịgide adịgide.
Iji belata mkpọtụ:
a) A na-atụ aro iji sekit snubber gafee ibu dị ka egosiri n'elu.
b) Jiri wires echedoro iche maka ntinye.
Njikọ ọnụ
Jiri naanị waya thermocouple ziri ezi ma ọ bụ eriri akwụ ụgwọ site na nyocha gaa na ọdụ akụrụngwa na-ezere nkwonkwo na eriri ma ọ bụrụ na ọ ga-ekwe omume.
Ọdịda iji ụdị waya ziri ezi ga-eduga na ọgụgụ na-ezighi ezi.
Gbaa mbọ hụ na ihe mmetụta ntinye ejikọrọ na ọnụ na ụdị ntinye etinyere na nhazi njikwa okpomọkụ bụ otu.
Nkọwa nke panel dị n'ihu
|
1 |
Usoro-uru (PV) / Ngosipụta aha njirimara |
1) Na-egosiputa uru usoro (PV).
2) Na-egosiputa akara akara na ọnọdụ nhazi/ menu n'ịntanetị. 3) Na-egosiputa ọnọdụ njehie PV. (tụ aka na tebụl 2) |
| 2 | Ngosipụta ntọala paramita | Na-egosiputa ntọala paramita na ọnọdụ nhazi/nchịkọta n'ịntanetị. |
| 3 | Ngosipụta njikwa njikwa 1 | Igwe ọkụ na-egbuke egbuke mgbe njikwa njikwa 1 dị |
| 4 | Ngosipụta njikwa njikwa 2 | Igwe ọkụ na-egbuke egbuke mgbe njikwa njikwa 2 dị |
| 5 | Tụgharịa | Dụgharịa akpaaka: Blinking (Na ọnụ ọgụgụ ngwa ngwa) ụda onwe: nwuo (na-eji nwayọ nwayọ) |
| 6 | Ebe obibi ngụ oge | Blinking: Ngụ oge obibi na-aga n'ihu. Na-aga n'ihu: Oge gafere. |
Nkọwa igodo ihu
| Ọrụ | AMAOKWU OKWU | |
| ONLINE | ||
| Iji view Ọkwa 1 | Pịa  |
igodo maka 3 sk. |
| Iji view Ọkwa 2 | Pịa  |
igodo maka 3 sk. |
| Iji view Ọkwa nchekwa | Pịa | + igodo maka 3 sk. |
| Iji view ihe ntanetị | Ngosipụta ala nwere ike ịhọrọ n'etiti SET1/SET2/TIME iji igodo. |
|
| IHE: Oge gafere / oge fọdụrụ dabere na nhọrọ ONL paramita na ọkwa 1. | ||
| Ka ịgbanwee ụkpụrụ oke n'ịntanetị | Pịa  ịgbanwe oke uru. |
|
| ỤMỤ NGWANGA | ||
| Iji view parameters n'otu ọkwa. | or igodo otu ugboro ka view ọrụ na-esote ma ọ bụ nke gara aga na menu arụ ọrụ. |
|
| Ka iwelie ma ọ bụ ibelata uru nke otu oke. | + na-abawanye na + iji belata uru ọrụ.
Mara: Uru oke agaghị agbanwe mgbe akpọchiri ọkwa otu. |
|
| IHE: Ngalaba ahụ ga-apụ na-akpaghị aka na ọnọdụ mmemme ka 30 sk gachara. nke adịghị arụ ọrụ.
OR Site na ịpị ma ọ bụ + igodo maka 3 sec. |
||
Tebụl 1: Oghere Mgbakwunye
Maka RTD
| Ụdị ntinye | RANGE | ||
| PT100 | Mkpebi: 1 | Mkpebi: 0.1 | UNIT |
| -150 ruo 850 | -150.0 ruo 850.0 | Celsius C | |
| -238 ruo 1562 | -199.9 ruo 999.9 | °F | |
MAKA THEMOCOUPLE
| Ụdị ntinye | RANGE | |||
|
J |
Mkpebi: 1
-199 ruo 750 |
Mkpebi: 0.1
-199 ruo 750 |
UNIT | |
| Celsius C | ||||
| -328 ruo 1382 | -199 ruo 999 | °F | ||
| K | -199 ruo 1350 | -199 ruo 999 | Celsius C | |
| -328 ruo 2462
-199 ruo 400 |
-199 ruo 999
-199 ruo 400 |
°F
Celsius C |
||
| T | ||||
| -328 ruo 750 | -199 ruo 750 | °F | ||
| R, S | 0 ruo 1750 | N/A | Celsius C | |
| 32 ruo 3182 | N/A | °F | ||
Tebụl 2: Ngosipụta mperi
Mgbe mperi mere, ngosipụta nke elu na-egosi koodu mperi dịka enyere n'okpuru.
| Njehie | Nkọwa | Mmepụta njikwa Ọnọdụ |
| S.bj | Nkwụsị ihe mmetụta /
Ọnọdụ oke oke |
Gbanyụọ |
| S.jE | Ihe mmetụta ntụgharị / N'okpuru ọnọdụ oke | Gbanyụọ |
Mmemme n'ịntanetị parampat
Ntọala 1/ ndabara: 50
Oke: SPLL ka SPHL
Ọ bụrụ na ahọpụtara ngosipụta dị elu ka SEEI mgbe ahụ, ịpị igodo ga-egosi na Ngosipụta elu: SEEI
Ngosipụta ala: <50>
Pịa igodo iji abawanye / mbelata uru SEEI.
Ntọala 2 / Band nwụrụ anwụ/ndabere: 0
Oke: SPLL ka SPHL
Ọ bụrụ na ahọpụtara ihe ngosi dị elu ka / mgbe ahụ, ịpị igodo ga-egosi na ngosipụta elu: SEE2/db
Ngosipụta ala: <0>
Pịa igodo iji abawanye / mbelata uru SEE2/db.
Ngụ oge obibi/ndabere: Gbanyụọ
Oke: Gbanyụọ, 1 ruo 9999 min
Ọ bụrụ na ahọpụtara ngosipụta nke elu dị ka mgbe ahụ, ịpị igodo ga-egosi na Ngosipụta elu: EInE
Ngosipụta obere:
Pịa igodo iji abawanye / mbelata uru oge.
Ntụziaka onye ọrụ
- Ngosipụta Bias : A na-eji ọrụ a iji dozie uru PV n'ọnọdụ ebe ọ dị mkpa ka uru PV kwenye na onye na-edekọ ma ọ bụ ihe ngosi ọzọ, ma ọ bụ mgbe enweghị ike itinye ihe mmetụta na ọnọdụ ziri ezi.
- Filter Time Constant : A na-eji ihe nzacha ntinye mee ka nzacha mgbanwe ngwa ngwa na-adaba na usoro mgbanwe na ngwa nzaghachi ngwa ngwa ma ọ bụ ngwa ngwa nke na-ebute njikwa na-adịghị mma.
Ihe nzacha dijitalụ na-enyekwa aka na njikwa usoro ebe ụda eletrik na-emetụta mgbama ntinye.
Ọnụ ahịa FTC buru ibu, agbakwunyere nzacha na-abawanye na onye njikwa na-emeghachi omume na usoro ahụ yana ọzọ. - Ntugharị akpaaka (AT): Ọrụ na-emegharị akpaaka na-agbakọ na-akpaghị aka ma na-edozi bandwit proportional (P), integral time (I), Derivative time (D), ARW% na cycle time (CY.T) dị ka usoro nhazi.
- Tune LED na-enwu n'ọsọ ọsọ mgbe a na-eme nlegharị anya akpaaka.
- Mgbe emechara Nchekwa onwe, Tune LED na-akwụsị ihichapụ.
- Ọ bụrụ na ike ahụ agbanyụọ tupu emechaa nlegharị anya akpaaka, a ga-amalitegharị nrụgharị akpaaka na ike ọzọ ON.
- Ọ bụrụ na emechaghị ntugharị akpaaka ka okirikiri 3-4 gachara, a na-enyo enyo na ọ ga-ada. N'okwu a, lelee wiring & parampat dị ka njikwa njikwa, ụdị ntinye, wdg.
- Megharịa akpaaka-nlegharị anya ọzọ, ma ọ bụrụ na enwere mgbanwe na setpoint ma ọ bụ usoro usoro.
- ON/ Gbanyụọ omume njikwa (Maka mgbanwe ọnọdụ):
Relay bụ 'ON' ruo n'okpomọkụ atọrọ wee bepụ 'gbanyụọ' n'elu okpomọkụ atọrọ. Ka okpomọkụ nke sistemụ na-adaba, a na-agbanye relay 'ON' na okpomọkụ dị ntakịrị ala karịa ebe a tọhapụrụ
HYSTERESIS :
Ọdịiche dị n'etiti ọnọdụ okpomọkụ nke relay na-agbanye 'ON' na ebe ntụgharị 'gbanyụọ' bụ hysteresis ma ọ bụ egwu nwụrụ anwụ.
- Ntọgharị akwụkwọ ntuziaka (maka njikwa PID & I = 0): Mgbe oge ụfọdụ gasịrị, usoro okpomọkụ na-edozi n'oge ụfọdụ ma enwere ọdịiche dị n'etiti ọnọdụ okpomọkụ setịpụrụ & okpomọkụ a na-achịkwa. Enwere ike iwepụ ihe dị iche a site na ịtọ ụkpụrụ nrụpụta akwụkwọ ntuziaka ha nhata & megidere nkwụsị.
- Self Tune (ST): A na-eji ya ebe a chọrọ ngbanwe nke paramita PID ugboro ugboro n'ihi mgbanwe ugboro ugboro na ọnọdụ usoro dịka. Ebe nhazi.
- Tune LED na-egbuke egbuke na nwayọ nwayọ mgbe nhazi onwe ya na-aga n'ihu.
- Mgbe emechara nlegharị anya nke onwe, Tune LED kwụsị ịta ara.
- A na-ebute nhazi onwe ya n'okpuru ọnọdụ ndị a:
1) Mgbe agbanwere setpoint.
2) Mgbe a gbanwere ọnọdụ ụda. (TUNE=ST) - ST ga-amalite naanị ma ọ bụrụ na PV <50% nke setpoint.
- ST ga-arụ ọrụ naanị mgbe ACT = RE.
Ntụziaka nhazi
LUMEL SA
ul. Słubicka 4, 65-127 Zielona Góra, Poland
ekwentị: +48 68 45 75 100, fax +48 68 45 75 508
www.lumel.com.pl
Nkwado ndị teknuzu:
Tel.: (+48 68) 45 75 143, 45 75 141, 45 75 144, 45 75 140
ozi-e: mbupu@lumel.com.pl
Ngalaba mbupụ:
ekwentị: (+48 68) 45 75 130, 45 75 131, 45 75 132
ozi-e: mbupu@lumel.com.pl
Nhazi & Ngosipụta:
ozi-e: laboratorium@lumel.com.pl
Akwụkwọ / akụrụngwa
 |
LUMEL RE11 njikwa okpomọkụ [pdf] Akwụkwọ ntuziaka onye nwe Onye na-ahụ maka okpomoku RE11, RE11, njikwa okpomọkụ, njikwa |
