LTECH M1A LED Remote Control

Nkọwapụta

• Model: M1A, M1B, M2A, M2B, M4A, M4B, M5A, M5B
• Agba: Ọcha/Oji
• Dimming Type: DIM, CT, RGB/RGBW
• Ụdị ikuku: RF 2.4GHz
• Vol -arụ ọrụ Voltage: Standard voltage
• Njikere ugbu a: 2uA
• Distance of Remote: 30M (Under no interference)
• Okpomọkụ na-arụ ọrụ: -25 ~ 50 Celsius
• Arọ: Na-adịgasị iche kwa ụdị
• Akụkụ: Na-adịgasị iche kwa ụdị

Ntinye ngwaahịa
Two ways to fix the remote holder:

1. Dozie ihe njide dịpụrụ adịpụ na mgbidi na nkesa abụọ.
2. Jiri nrapado 3M dozie ihe njide dịpụrụ adịpụ na mgbidi.

Mara:
Please pull out the battery tab before first use.

Ọrụ bọtịnụ

Dimming Remote Control M1A/M1B

• Brightness Touch Ring:
  Touch to adjust the brightness of the light.
• Icha ọkụ
  +/-: Gbanwee nchapụta ahụ.
• Ọkwa 4 ihie:
  25%, 50%, 75%, 100% — shortcut keys for 4 brightness options.
• Ebe:
  Press briefly to activate a scene; press and hold for 3 seconds to save the current light state to the scene.

 

P-Series Controllers

1. Short press the ID learning button on the controller and the indicator light flashes. Complete the following steps within 10 seconds.
2. Jikọta usoro MINI ime ime:
   • Single-zone MINI remote: Long press the ON/OFF button until the
     controller’s indicator light flashes fast.
   • Multi-zone MINI remote: Long press zone button until the
     controller’s indicator light flashes fast.
3. Mgbe ọkụ ibu nke onye njikwa na-enwu nwayọọ nwayọọ ma na-anọgide na-adị mgbe niile, mmụta ahụ na-aga nke ọma.

The MINI series LED remote control uses RF 2.4GHz wireless transmission technology, with a control distance (unobstructed) of up to 30 meters. When paired with the P-series controllers (P1/P2/P3/P4/P5), one controller is compatible with 5 outputs, supporting five types of lighting fixtures: DIM/CT/RGB/RGBW/RGBCW. One remote control can control numerous controllers within its effective range, enabling functions such as turning lights on/off, adjusting brightness, adjusting color temperature and RGB static colors, dynamic mode effects, and scene recall, meeting users’ needs for different lighting applications. For example, the dimming remote (M1A/M1B) has a quick brightness function, allowing one-button switching of brightness percentage; the color temperature remote (M2A/M2B) has a night light function, allowing one-button switching to low brightness; the RGBW remote (M4A/M4B) and RGBCW remote (M5A/M5B) can switch dynamic modes via mode buttons, or achieve a 9-mode loop effect via remote control combination keys.

Akụkụ

Ntinye ngwaahịa

Ụzọ abụọ iji dozie njide remote:

1. Dozie ihe njide dịpụrụ adịpụ na mgbidi na nkesa abụọ.
2. Jiri nrapado 3M dozie ihe njide dịpụrụ adịpụ na mgbidi.

Note: Please pull out the battery tab before first use

Ọrụ bọtịnụ
Dimming Remote Control M1A/M1B

• Brightness Touch Ring: Touch to adjust the brightness of the light.
• Brightness +/-: Adjust the brightness.
• 4 Brightness Levels: 25%, 50%, 75%, 100% — shortcut keys for 4 brightness options. Scene: Press briefly to activate a scene; press and hold for 3 seconds to save the current light state to the scene.

Color Temperature Remote Control M2A/M2B

• On/Off: Turns the light on or off.
• Color Temperature Touch Ring: Touch to change the light’s color temperature. Night Light: Switches to low brightness (night light mode).
• Brightness +/-: Adjusts the brightness.
• 3 Color Temperatures: Cool White, White, Warm White — shortcut keys for 3 color temperature options.
• Scene: Press briefly to activate a scene; press and hold for 3 seconds to save the current light state to the scene.

RGBW Remote Control M4A/M4B

• On/Off: Turns the light on or off.
• Touch Color Ring: Touch the RGB color ring to select a color.
• Mode/Speed: Press briefly to switch dynamic modes; press and hold to adjust speed; press the “R” and “W” keys simultaneously to play dynamic modes in a loop. Brightness +/-: Adjusts the brightness.
• Red/Green/Blue: Press briefly to turn the static red/green/blue channel on or off; press and hold to adjust the brightness of the current channel.
• White Light: For RGBW lights, press briefly to turn the W (white) channel on or off; press and hold to adjust the brightness of the W channel.
• Scene: Press briefly to activate a scene; press and hold for 3 seconds to save the current light state to the scene.

RGBCW Remote Control M5A/M5B

• On/Off: Turns the light on or off.
• Touch Color Ring: Touch the color temperature/RGB color ring to select a color.
• Mode/Speed: Press briefly to switch dynamic modes; press and hold to adjust the speed; press the “R” key and , note: the original text has a blank space here, please confirm the key name] simultaneously to play dynamic modes in a loop.
• Color Temperature: Press briefly to turn the color temperature channel on or off, and the touch color ring will switch to the color temperature touch ring; press and hold to adjust the brightness of the current color temperature.
• RGB: Press briefly to turn the RGB channel on or off, and the touch color ring will switch to the RGB touch ring; press and hold to adjust the brightness of the current color.
• Red/Green/Blue: Press briefly to turn the static red/green/blue channel on or off; press and hold to adjust the brightness of the current channel.
• Scene: Press briefly to activate a scene; press and hold for 3 seconds to save the current light state to the scene.

Pair the Controller

Jikọọ remote
Jikọọ remote site na iji bọtịnụ

1. Short press the ID learning button on the controller and the indicator ID learning button light flashes. Please complete the following steps within 10 seconds.
2. Pair the MINI series remote: Single-zone MINI remote: Long press the ON/OFF button until the controller’s indicator light flashes fast. Multi-zone MINI remote: Long press zone button until the controller’s indicator light flashes fast.
3. Mgbe ọkụ ibu nke onye njikwa na-enwu nwayọọ nwayọọ ma na-anọgide na-adị mgbe niile, mmụta ahụ na-aga nke ọma.

Jikọọ remote site na ịgbanye njikwa

1. Gbanyụọ onye njikwa mbụ.
2. Pair the MINI series remote:Single-zone MINI remote: Long press the ON/OFF button and power on the controller at the same time until the controller’s indicator light flashes fast. Multi-zone MINI remote: Long press zone button and power on the controller at the same time until the controller’s indicator light flashes fast.
3. Mgbe ọkụ ibu nke onye njikwa na-enwu nwayọọ nwayọọ ma na-anọgide na-adị mgbe niile, mmụta ahụ na-aga nke ọma.

Rịba ama:
Enwere ike ijikọ onye njikwa na oke remotes iri. Ijikọta ihe karịrị remotes iri ga-ehichapụ koodu NJ ime ime mbụ ozugbo.

Mepee remote ahụ
Mepee remote site na iji bọtịnụ:

1. Delete all remote pairings Long press the ID learning button on the controller for 10 seconds, and then short-press it for 6 times. When the controller’s indicator light flashes and then stays on, pairing removal is successful.
2. Delete a single remote pairing. Single-zone Mini: Press and hold the ID learning key of the controller for 5 seconds. Within 10 seconds, press the on/off key three times briefly. When the load light flashes slowly and then stays on constantly, the code clearing is successful. Multi-zone Mini: Press and hold the ID learning key of the controller for 5 seconds. Within 10 seconds, press the zone key three times briefly. When the load light flashes slowly and then stays on constantly, the code clearing is successful.

Unpair the remote by powering on the controller. Delete a single remote pairing
Single-zone Mini: Power on the controller for 2 seconds, then power it off for 2 seconds, and power it on again. Press the on/off key three times briefly within 3 seconds. When the load light flashes slowly and then stays on constantly, the code clearing is successful.
Multi-zone Mini: Power on the controller for 2 seconds, then power it off for 2 seconds, and power it on again. Press the zone key three times briefly within 3 seconds. When the load light flashes slowly and then stays on constantly, the code clearing is successful.

Ọnọdụ ìhè egosi

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 30 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Rịba ama:
If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Ụgbọ njem na Nchekwa

1. Ụgbọ njem
   Enwere ike ibupu ngwaahịa site na ụgbọ ala, ụgbọ mmiri na ụgbọ elu. N'oge njem, ngwaahịa kwesịrị ichebe site na mmiri ozuzo na anyanwụ. Biko zere ujo siri ike na ịma jijiji n'oge usoro nbudata na nbudata.
2. Nchekwa
   Ọnọdụ nchekwa ahụ kwesịrị ịgbaso ụkpụrụ Klas I Environmental Standards. A na-atụ aro ngwaahịa ndị echekwara ihe karịrị ọnwa isii ka enyochaghachi ya na enwere ike iji ya naanị mgbe ha tozuru oke.

Nlebara anya

• Biko jiri na gburugburu ime ụlọ kpọrọ nkụ;
• Mgbe ị na-etinye batrị, biko jikọọ ọnụ nke ọma na nke adịghị mma nke ọma. Ọ bụrụ na agaghị eji ebe nchekwa ahụ ogologo oge, wepụ batrị ahụ;
• Mgbe ebe dịpụrụ adịpụ dị mkpụmkpụ ma ma ọ bụ nke ime ime anaghị arụ ọrụ ugboro ugboro, biko gbanwee batrị n'oge;
• Biko buru ya nke ọma ma tinye ya ka ọ ghara ịdaba na-akpata mmebi;
• Ọ bụrụ na mmejọ mere, biko anwala idozi ngwaahịa n'onwe gị. Ọ bụrụ na ị nwere ajụjụ ọ bụla, biko kpọtụrụ ndị na-ebubata gị.
• Akwụkwọ ntuziaka a nwere ike ịgbanwe na-enweghị ọkwa ọzọ. Ọrụ ngwaahịa dabere na ngwaahịa. Biko nweere onwe gị ịkpọtụrụ ndị nkesa gọọmentị anyị ma ọ bụrụ na ị nwere ajụjụ ọ bụla.

Akwụkwọ ikike akwụkwọ ikike
Warranty periods from the date of delivery: 5 years. Free repair or replacement services for quality problems are provided within warranty periods. Warranty exclusions below: Following conditions are not within the guarantee range of free repairing or replacement services:

• Agafee oge ikike;
• Mmebi ọ bụla artificial kpatara site na elu voltage, overload, or improper operations; Products with severe physical damage;
• Mmebi nke ọdachi ndị na-emere onwe ha na ike majeure kpatara;
• Ebibiela akara akwụkwọ ikike na koodu mkpuchi.
• No any contract signed by our company.
• Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
• Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

Ịdọ aka ná ntị

• Ihe ize ndụ: Ngwaahịa a nwere batrị bọtịnụ ma ọ bụ mkpụrụ ego.
• Ọnwụ ma ọ bụ nnukwu mmerụ ahụ nwere ike ime ma ọ bụrụ na etinyere ya.
• Bọtịnụ cell ma ọ bụ batrị mkpụrụ ego iloro nwere ike ime ka ọkụ dị n'ime kemịkal n'ime ihe dịka awa 2.
• Chekwaa batrị ọhụrụ na nke eji eme ihe na-agaghị eru ụmụaka
• Chọọ nlekọta ahụike ozugbo ma ọ bụrụ na a na-enyo enyo ilo ma ọ bụ tinye batrị n'ime akụkụ ahụ ọ bụla.
• Wepu ma megharịa ozugbo ma ọ bụ tụfuo batrị eji arụ ọrụ dịka iwu mpaghara siri dị ma zere ụmụaka. Atụpụla batrị n'ime ahịhịa ụlọ ma ọ bụ gbaa ọkụ.
• Ọbụna batrị ejiri mee ihe nwere ike ịkpata mmerụ ahụ ma ọ bụ ọnwụ.
• Kpọọ ụlọ ọrụ nchịkwa nsi dị na mpaghara maka ozi ọgwụgwọ.
• Ụdị batrị dakọtara: CR2032.
• Batrị nkịtị voltage: 3Vdc.
• Ekwesịghị ịchaji batrị anaghị ebugharị.
• Amanyela mwepu, fanye, kwasasịa, ikpo ọkụ n'elu (nkọwa okpomọkụ akọwapụtara nke onye nrụpụta) ma ọ bụ gbaa ọkụ. Ime otú ahụ nwere ike ịkpata mmerụ ahụ n'ihi ikuku, ntapu ma ọ bụ mgbawa na-ebute ọkụ ọkụ.
• Gbaa mbọ hụ na etinyere batrị nke ọma dịka polarity (+ na -).
• Ejikọtala batrị ochie na nke ọhụrụ, ụdị dị iche iche ma ọ bụ ụdị batrị, dị ka alkaline, carbon-zinc, ma ọ bụ batrị enwere ike ịchaji.
• Wepu ma megharịa ozugbo ma ọ bụ tụfuo batrị na akụrụngwa anaghị eji ogologo oge dịka iwu mpaghara siri dị.
• Chebe akụkụ batrị ahụ kpamkpam. Ọ bụrụ na akụkụ batrị emechighị nke ọma, kwụsị iji ngwaahịa ahụ, wepụ batrị ndị ahụ, ma debe ya na ụmụaka.

Ajụjụ

Kedu ka m ga-esi gbanwee nchapụta nke ìhè ahụ?

To adjust the brightness of the light, use the brightness touch ring or the brightness +/- buttons on the remote control.

Akwụkwọ / akụrụngwa

LTECH M1A LED Remote Control [pdf] Akwụkwọ ntuziaka M1A, M1A LED Remote Control, LED Remote Control, Remote Control

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ