LANTRONIX 900-310M XPort Embedded Ethernet Module Guide nwụnye

Ngwaọrụ Ngwaọrụ
Ntuziaka njikọta

ọdịnaya zoo

1 900-310M XPort Embedded Ethernet Module

2 Okwu mmalite

3 Nkọwa na nkọwapụta

4 Eserese

5 Akwụkwọ / akụrụngwa

5.1 Ntụaka

6 Ozi ndị metụtara

900-310M XPort Embedded Ethernet Module

Nkeji nọmba 900-310
Ndozigharị M October 2022

Arịa ọgụgụ isi

© 2022 Lantronix. Ikike niile echekwabara. Enweghị akụkụ nke ọdịnaya nke akwụkwọ a nwere ike ibunye ma ọ bụ degharịa n'ụdị ọ bụla ma ọ bụ n'ụzọ ọ bụla na-enweghị ikike ederede nke Lantronix.
Lantronix, DeviceLinx na XPort bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Lantronix.
Enyere ikike ikike: https://www.lantronix.com/legal/patents/; ikike ikike ọzọ na-echere.
Ethernet bụ ụghalaahịa nke ụlọ ọrụ XEROX. UNIX bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke The Open Group. Windows bụ ụghalaahịa nke Microsoft Corp.

Akwụkwọ ikike
Maka nkọwa gbasara amụma akwụkwọ ikike Lantronix, biko gaa na nke anyị web saịtị na
www.lantronix.com/support/warranty.

Ndi ana-akpo
Isi ụlọ ọrụ Lantronix
48 Nchọpụta
Suite 250
Irvine, CA 92618, USA
Ekwentị: 949-453-3990
Fax: 949-453-3995
Nkwado ndị teknuzu
Online: https://www.lantronix.com/technical-support/
Ụlọ ahịa ahịa
Maka ndepụta ugbu a nke ụlọ ọrụ ịre ahịa ụlọ na nke mba ụwa gaa na Lantronix web saịtị na https://www.lantronix.com/about-us/contact/

Disclaimer na Ndozigharị

Ịrụ ngwá ọrụ a n'ime ebe obibi nwere ike ịkpata nnyonye anya, nke mere na onye ọrụ, na-akwụ ụgwọ nke ya, ga-achọ ka ọ mee ihe ọ bụla a ga-achọ iji dozie nnyonye anya.
Mara: Emebere ngwaahịa a ka ọ kwado oke maka ngwaọrụ dijitalụ Klas B dịka akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta, na-eji, ma nwee ike ịgbasa ike ugboro redio, ma ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka a siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio.
Mgbanwe ma ọ bụ mgbanwe na ngwaọrụ a nke Lantronix akwadoghị nke ọma ga-emebi ikike onye ọrụ iji rụọ ọrụ a.
Mara: Site n'ịzụta XPort, OEM na-ekwenye na nkwekọrịta ikikere firmware OEM nke na-enye OEM ikike na-enweghị isi, ikike firmware na-enweghị royalty iji na kesaa onyonyo firmware ọnụọgụ abụọ enyere, naanị ruo n'ókè dị mkpa iji ngwa XPort. Maka nkọwa ndị ọzọ, biko hụ nkwekọrịta ikikere firmware XPort OEM.

Akụkọ ngbanwe

Ụbọchị	Mkpu.	Okwu
Nọvemba 2003	A	Mwepụta mbụ.
Eprel 2004	B	Firmware 1.6 atụmatụ; ozi iji kwado XPort-03
June 2004	C	Emelitere nkọwa nka na ụzụ
Ọgọst 2004	D	Firmware 1.8 atụmatụ; agbakwunyere XPort-485 ozi
Ọktoba 2004	E	E wepụrụ ntụaka aka akwụkwọ mgbe ochie
Maachị 2005	F	Ihe atụ emelitere
Septemba 2009	G	Emelitere maka mwepụta ya na bọọdụ ngosi ọhụrụ, yana XPort-04
June 2010	H	Ndozi obere; Lantronix emelitere
Julaị 2010	I	Ndozi obere; Emelitere Tebụl 2-5 Ọnọdụ arụ ọrụ akwadoro iji dakọọ paramita mpempe akwụkwọ data
Febụwarị 2013	J	Ozi ọnụọgụ akụkụ emelitere.
Ọgọst 2015	K	Ozi ntụtụ emelitere.
Ọgọst 2016	L	Eserese ngwaahịa emelitere.
Ọktoba 2022	M	Atụmatụ ire ere agbakwunyere. Adreesị Lantronix emelitere.

Maka ntughari ọhụrụ nke akwụkwọ ngwaahịa a, biko lelee akwụkwọ ntanetị anyị na www.lantronix.com/support/documentation.

Okwu mmalite

Banyere ntuziaka njikọta
Ntuziaka a na-enye ozi achọrọ iji jikọta ihe nkesa ngwaọrụ Lantronix® XPort n'ime bọọdụ sekit ebipụtara ndị ahịa. Ezubere akwụkwọ ntuziaka a maka ndị injinia na-ahụ maka itinye XPort na ngwaahịa ha.
Mara: Akwụkwọ a na-ekpuchi nọmba nkesa ihe nkesa XP1001000-03R, XP1002000-03R, XP100200S-03R, XP1001000-04R, XP1002000-04R, XP100200S04R, XP1001000 -05R.
Akwụkwọ ndị ọzọ
Gaa na Lantronix Web saịtị na www.lantronix.com/support/documentation maka akwụkwọ mgbakwunye ndị a.

Akwụkwọ	Nkọwa
*Ntuziaka onye ọrụ nkesa ngwaọrụ XPort*	Na-enye ozi achọrọ iji hazie, jiri, na melite XPort firmware.
*Ngwa ngwa ngwa XPort Universal Demo Board*	Na-enye usoro iji bulite XPort ma na-agba ọsọ na bọọdụ ngosi.
*Akwụkwọ ntuziaka onye ọrụ XPort Universal Demo*	Na-enye ozi achọrọ iji XPort na bọọdụ ngosi.
*Ntuziaka onye nrụnye ngwaọrụ*	Na-enye ntuziaka maka iji ngwa dabere na Windows iji hazie XPort na sava ngwaọrụ Lantronix ndị ọzọ.
*Com Port Redirector ntuziaka onye ọrụ*	Na-enye ozi maka iji ngwa dabere na Windows iji mepụta ọdụ ụgbọ mmiri com.

Nkọwa na nkọwapụta

Ihe nkesa ngwaọrụ agbakwunyere XPort bụ ngwọta na-enye netwọkụ zuru oke nke etinyere n'ime ngwugwu RJ45. Obere ihe ntụgharị nke serial-to-Ethernet na-enye ndị na-emepụta akụrụngwa mbụ (OEMs) aka ịga ahịa ngwa ngwa na ngwa ngwa site na ịkparịta ụka n'Ịntanet. web ibe ọrụ ike arụnyere n'ime ngwaahịa ha.

Ihe XPort

XPort nwere njikwa DSTni nke Lantronix, yana 256 Kbytes nke SRAM, 16 Kbytes nke buut ROM, yana AMD 10/100 PHY agbakwunyere.
XPort nwekwara ihe ndị a:

Oghere Usoro interface 3.3-volt
Ntụtụ I/O niile na-anabata 5V

4-Mbit flash ebe nchekwa
Ethernet magnetik

Ihe nzacha ọkụ ọkụ
Tọgharia sekit

+ 1.8V onye na-achịkwa
25-MHz kristal na Ethernet LEDs

XPort chọrọ ike +3.3-volt ma emebere ya ka ọ rụọ ọrụ na oke okpomọkụ (lee data teknụzụ).

Eserese XPort Block
Eserese na-esonụ bụ eserese ngọngọ nke XPort na-egosi mmekọrịta nke akụrụngwa.

PCB Interface

XPort nwere ọdụ ụgbọ mmiri serial dakọtara na ọnụego data ruru 920 kbps (na ọnọdụ ọrụ dị elu). Ihe akara ngosi (ntụtụ 4–8) bụ ọkwa mgbagha 3.3V CMOS, yana nnabata 5V. Ihe ntụtụ interface serial gụnyere +3.3V, ala, na nrụpụta. Mgbama usoro na-ejikọkarị na ngwaọrụ dị n'ime, dịka UART. Maka ngwa chọrọ eriri mpụga na-eji RS-232 ma ọ bụ RS-422 4-waya na RS-485 2-waya vol.tage ọkwa, XPort ga-emerịrị ka mgbawa transceiver serial.

Okpokoro 2-1 PCB Interface Signals

Aha mgbaàmà	Ntụtụ XPort #	Ọrụ izizi
GND	1	Ala sekit
3.3V	2	+ 3.3V ike n'ime
Tọgharia	3	Ntọgharị mpụga na
Wepụ data	4	Wepụ data nsonazụ (nke DSTni wuru n'ime UART)
Data In	5	Oghere Usoro data na (nke DSTni wuru n'ime UART)

Aha mgbaàmà	Ntụtụ XPort #	Ọrụ izizi
CP1/RTS (Pin nwere ike ịhazi ya)	6	Enwere ike ịhazi CP1 dị ka ndị a: • njikwa mmiriRTS (Arịrịọ izipu) mmepụta UART wuru n'ime DSTni maka njikọ na CTS nke ngwaọrụ agbakwunyere. • Ntinye/mmepụta nwere ike ime: Enwere ike ịkwanye CP1 ma ọ bụ gụọ site na njikwa ngwanrọ, na-adabereghị na ọrụ ọdụ ụgbọ mmiri.
CP2/DTR (Pin nwere ike ịhazi ya)	7	Enwere ike ịhazi CP2 dị ka ndị a: • Njikwa modemDTR (Njikere ọdụ data) mmepụta UART arụnyere n'ime DSTni maka njikọ na DCD nke ngwaọrụ agbakwunyere. • Ntinye/mmepụta nwere ike ime: Enwere ike ịkwanye CP2 ma ọ bụ gụọ site na njikwa ngwanrọ, na-adabereghị na ọrụ ọdụ ụgbọ mmiri.
CP3/CTS/DCD (Pin nwere ike ịhazi ya)	8	Enwere ike ịhazi CP3 dị ka ndị a: • Njikwa usoro: CTS (Dochapụ izipu) ntinye UART arụnyere n'ime DSTni gụrụ maka njikọ na RTS nke ngwaọrụ agbakwunyere. • Njikwa modem: DCD (Nchọpụta onye na-ebu data) ntinye UART arụnyere n'ime DSTni gụrụ maka njikọ na DTR nke ngwaọrụ agbakwunyere. • Ntinye/mmepụta nwere ike ime: Enwere ike ijikwa ma ọ bụ gụọ CP3 site na njikwa ngwanrọ, na-adabereghị na ọrụ ọdụ ụgbọ mmiri.

Njikọ Ethernet
Igwe magnetik interface Ethernet, njikọ RJ45, na ọkwa ọkwa Ethernet dị na shei nkesa ngwaọrụ.
Tebụl 2-2 Ihe nrịbama ihu igwe Ethernet (ụkpụrụ ụlọ ọrụ)

Aha mgbaàmà	DIR	Kpọtụrụ	Ọrụ izizi
TX+	pụọ	1	Eserese Ethernet na-ebufe data +
TX-	pụọ	2	Ihe na-ebufe data Ethernet dị iche -
RX+	In	3	Ethernet dị iche na-enweta data +
RX-	In	6	Ihe dị iche iche Ethernet na-anata data -
Ejighi ya		4	Akwụsịla
Ejighi ya		5	Akwụsịla
Ejighi ya		7	Akwụsịla
Ejighi ya		8	Akwụsịla
Ọta			Ala chassis

Igwe ọkụ
XPort nwere LED ndị a:

Njikọ (agba agba, ọkụ aka ekpe)
Ihe omume (agba agba, ọkụ aka nri)

Tebụl 2-3 XPort LED Ọrụ

Njikọ LED akụkụ aka ekpe		Ọrụ ikana aka nri akụkụ
Agba	Pụtara	Agba	Pụtara
Gbanyụọ	Enweghị njikọ	Gbanyụọ	Enweghị Ọrụ
Amber	10 Mbps	Amber	Ọkara Duplex
Akwụkwọ ndụ akwụkwọ ndụ	100 Mbps	Akwụkwọ ndụ akwụkwọ ndụ	Duplex zuru ezu

Akụkụ

E gosipụtara akụkụ XPort na eserese ndị a.

Nhazi PCB akwadoro

E gosipụtara ụkpụrụ oghere na akụkụ mgbago maka ihe nkesa ngwaọrụ XPort na eserese na-esote. Maka ikposa ọkụ kwesịrị ekwesị, a na-atụ aro na PCB nwere ihe dịka inch square 1 nke ọla kọpa jikọtara na taabụ ọta. Taabụ ọta bụ isi iyi dị mkpa nke ikpo ọkụ maka ngwaọrụ ahụ.
A na-ewere ọta XPort dị ka "ala chassis" na kwesịrị ịdị iche na "ala mgbaama". ESD dị nso na XPort na oghere panel ga-amaba na ọta.
Anyị na-akwado iji elu voltage (~ 200V), obere ESR, 0.01uF capacitors iji jikọọ ala chassis na ala mgbaàmà na 3.3V. Nke a ga-eme ka voltage spike sitere na ESD ka a ga-ekesa ya na ala mgbaama yana 3.3V na-enweghị net vol.tage na-abawanye n'etiti 3.3V na ala mgbaàmà. Maka ọkwa kachasị elu nke nchebe ESD nke XPort, a na-atụ aro na ọta agaghị ejikọta ya na mgbaàmà GND. Mkpịsị aka metalshield dị gburugburu XPort's RJ45 kwesịrị ịkpọtụrụ ụlọ ngwaahịa ahụ mgbe ụlọ ahụ bụ ọla, ma ọ bụ mkpuchi ọla.
Ọta bụkwa ebe ikpo ọkụ maka ime EX Processor. Dị ka ọ dị n'ime ngwa niile na-ekpo ọkụ, ka ọla kọpa na-ejikọta na ikpo ọkụ na-aka mma. Ịgbakwunye 1 inch square inch nke iju mmiri ọla kọpa na PCB zuru oke iji kwe ka XPort rụọ ọrụ ruo +85°C. Ọ bụrụ na ngwa anaghị atụ anya ịhụ okpomọkụ ruo +85 Celsius C, ebe a na-ekpo ọkụ nwere ike ịdị ntakịrị karịa 1 square inch.

Ntụnye ire ere

kpachara anya: Ejichala modul XPort.
Nke a bụ ngwaọrụ eletrọt. Emeghela nkwakọ ngwaahịa ma jikwaa ngwaọrụ ndị a ma ewezuga na ebe a na-arụ ọrụ na-enweghị stats.
Akụkụ a na-enye nduzi n'ịmepụta usoro mgbakọ n'ichepụta maka ihe nkesa ngwaọrụ XPort.
Tebụlụ na-esonụ na-achịkọta ndakọrịta n'ichepụta ịsa ahụ na usoro ịsa ahụ yana profile A kọwara nkọwa n'okpuru tebụl.

Ịzụ ahịa ntugharị [Profile]	Ịzụ ahịa Wave [Profile]	Ịzụta aka [Profile]	Ịsacha
Ekwekọrịtaghị¹	Dakọtara [WS-A]	Dakọtara [HS-A]	Ekwekọrịtaghị²

[WS-A] Wave soldering dakọtara - Pro akwadorofile

T1-T2: Oke okpomọkụ na-arụ ọrụ Flux (Dịka akwụkwọ data nke Flux si dị)
t1: Flux na-arụ ọrụ oge 30-60 sekọnd n'etiti T1 ruo T2.

t2: Oge nke ndu emikpu na solder (3-6 sekọnd)

Mara: Profile bụ okpomọkụ na soldered atụdo.
[HS-A] Aka ire ere dakọtara - Pro akwadorofile 60-watt soldering ígwè nwere n'ọnụ okpomọkụ na 380°C +/- 30°C, kacha ogologo nke 10 sekọnd.

Ikpughe ngwaahịa na usoro ntughari nwere ike imebi ihe plastik na-ebute nnyonye anya na mmegharị pin RJ45 & ntinye nke nkwụnye Ethernet n'ime jakị. Ejila n'ime oven reflow, ma ọ bụ hazie site na iji mado-in-hole reflow.

Ịsacha bụ usoro iji wepụ ihe mmetọ nke usoro nrụpụta, ọ na-abụkarị mgbe a gbasịrị ya. Ịsacha ngwaahịa agbakwunyere nwere ike ịmanye mmetọ n'èzí ka ọ bụrụ ọnyà n'ime ngwaahịa ma metụta ọrụ ngwaahịa.

Akara Ozi Ngwaahịa

Labelụ ozi ngwaahịa nwere ozi dị mkpa gbasara ngalaba gị, dị ka NJ ngwaahịa ya (aha), koodu mmanya, nọmba akụkụ na adreesị Ethernet (MAC).

Mara: Nọmba akụkụ* na adreesị MAC* dị na akara ngwaahịa ga-adịgasị iche dịka otu ụdị (XPort-03, XPort-04 ma ọ bụ XPort-05).

Nkọwapụta ọkụ eletrik
kpachara anya: Imesi ngwaọrụ ahụ n'elu ọkwa edepụtara na Tebụl 2-4 nwere ike bute mmebi na XPort na-adịgide adịgide. Ngosipụta na ọnọdụ ọkwa kachasị oke maka ogologo oge nwere ike imetụta ntụkwasị obi XPort.
Tebụl 2-4 Ntụle kachasị oke

Oke	Akara	Min	Oke	Nkeji
Tụkwasịnụ Voltage	VCC	0	3.6	Vdc
CPx, Data In, Data Out Voltage	VCP	-0.3	6	Vdc
Okpomọkụ na-arụ ọrụ		-40	85	oC
Okpomọkụ nchekwa		-40	85	oC

Tebụl 2-5 akwadoro Ọnọdụ ọrụ

Oke	Akara	Min	Ụdị	Oke	Nkeji
Tụkwasịnụ Voltage	VCC	3.14	3.3	3.46	Vdc
Tụkwasịnụ Voltage Ripples	VCC_PP			2.0	%
Ọsọ nke ugbu a (ụdị ọsọ CPU nkịtị)	ICC		224		mA
Oke Tọgharia ike		2.7			Vdc
Tụgharịa ntụtụ ntinye ntinye dị ala Voltage	VRES_IL			0.36	Vdc
Tọgharia pin Ntinye High Voltage	VRES_IL	2.0		3.46	Vdc
CPx, RX Ntinye ala Voltage	VCP_IL			0.8	Vdc
CPx, RX Ntinye High Voltage	VCP_IH	2.0		5.5	Vdc
CPx, TX Mpụta Low Voltage	VCP_OL			0.4	Vdc
CPx, TX mmepụta High Voltage	VCP_OH	2.4			Vdc

Nkọwa nka nka

Tebụl 2-6 Nkọwa nka nka

Otu	Nkọwa
CPU, ebe nchekwa	Lantronix DSTni-EX 186 CPU, 256-Kbyte efu echere steeti SRAM, Flash 512-Kbyte, 16-Kbyte buut ROM
Firmware	Enwere ike ịkwalite site na TFTP na ọdụ ụgbọ mmiri
Tọgharia Circuit	Nrụgharị nrụpụta ike 200ms dị n'ime. Ntọgharị mgbada ike kpalitere na 2.6V. Ntinye nrụpụta mpụga na-ebute nrụpụta 200ms dị n'ime.
Oghere Usoro	CMOS (Asynchronous) ọkwa ọkwa 3.3V Ọnụego a na-ahọrọ ngwa ngwa: 300 bps ruo 921600 bps
Usoro usoro akara	Iberibe data: 7 ma ọ bụ 8 Nkwụsị nkwụsị: 1 ma ọ bụ 2 Parity: odd, ọbụna, ọ dịghị
Njikwa modem	DTR/DCD, CTS, RTS
Njikwa usoro	XON/XOFF (software), CTS/RTS (ngwaike), Ọ nweghị
Ihe mmemme I / O	3 PIO atụdo (software họrọ), sink ma ọ bụ isi iyi 4mA max.
Nweta netwok	RJ45 Ethernet 10Base-T ma ọ bụ 100Base-TX (na-akpachapụ anya)
Ndakọrịta	Ethernet: Ụdị 2.0/IEEE 802.3 (eletrik), Ethernet II ụdị etiti
Ogbugba ndu akwadoro	ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, Auto IP, SMTP, na HTTP
Igwe ọkụ	Ọrụ Njikọ 10Base-T na 100Base-TX, Duplex zuru/ọkara. Ọkwa emepụtara sọftụwia & akara achọpụtara nwere ike ịnya ọkụ dịpụrụ adịpụ site na CP1 & CP3.
Nlekọta	Ime web ihe nkesa, SNMP (naanị ọgụgụ) Nbanye nbanye, Telnet nbanye
Nchekwa	Nchedo okwuntughe, njirimara mkpọchi, nhọrọ Rijndael 256-bit nzuzo
Ime Web Ihe nkesa	Na-eje ozi static Web ibe na applets Java Ikike nchekwa: 384 Kbytes
Ibu	0.34 oz (9.6 grams)
Ihe onwunwe	Metal shei, thermoplastic akpa
Okpomọkụ	Oke ọrụ: -40°C ruo +85°C (-40°F ruo 185°F) ọnọdụ nkịtị; -40°C ruo +75°C (-40°F ruo 167°F) ụdịdị arụmọrụ dị elu
Ujo/Mma jijiji	Ujo na-adịghị arụ ọrụ: 500 g's ịma jijiji na-adịghị arụ ọrụ: 20 g's
Akwụkwọ ikike	Akwụkwọ ikike dị afọ abụọ
Ngwa gụnyere	Ngwa nhazi ihe nrụnye ngwaọrụ dabere na Windows 98/NT/2000/XP yana Windows™ nke dabeere na Com Port Redirector.
Nkwenye EMI	Mgbapụta ọkụ na eduzi - na-agbaso oke klaasị B nke EN 55022: 1998 ESD Direct & Indirect - kwekọrọ na EN55024:1998 RF Electromagnetic Field Immunity - kwekọrọ na EN55024: 1998 Igwe ọkụ eletrik na-ebufe ngwa ngwa / mgbawa ọkụ - na-akwado EN55024: 1998 ike ikuku magnetik ugboro ugboro - kwekọrọ na EN55024: 1998 RF usoro a na-ahụkarị eduzi55024 na nso nso 1998 - XNUMX

Eserese

Ngosipụta bọọdụ ngosi

RS-422 4-waya na RS-485 2- waya njikọ Eserese
Ndị na-esonụ example na-akọwa njikọ dị n'etiti XPort-485 na transceiver IC mpụga:
Ọgụgụ 3-2. XPort RS-422 4-waya na RS-485 2- waya njikọ Eserese

A: Ozi nnabata na akwụkwọ ikike
Ozi nnabata

(Dịka ISO/IEC Ntuziaka 22 na EN 45014)
Aha & Adreesị Onye nrụpụta:
Lantronix 48 Discovery, Suite 250, Irvine, CA 92618 USA
Na-ekwupụta na ngwaahịa a:
Ụdị Aha Ngwaahịa: Ihe nkesa Ngwaọrụ agbakwunyere XPort
Dabara n'ụkpụrụ ndị a ma ọ bụ akwụkwọ iwu ndị ọzọ:
Mgbapụta ọkụ eletrik:
EN55022: 1998 (IEC/CSPIR22: 1993) Mgbapụta ikuku RF, 30MHz-1000MHz
Emere RF Mgbapụta – Ahịrị ekwentị – 150 kHz – 30 MHz
FCC Nkebi 15, Nkebi B, Klas B
IEC 1000-3-2/A14: 2000
IEC 1000-3-3: 1994
Immunity Electromagnetic:
EN55024: Ngwa teknụzụ ozi 1998 - Njirimara mgbochi.
ESD Direct, Mgbasa kọntaktị
ESD na-apụtaghị ìhè
Nnwale Ubi Electromagnetic RF Radiated
Ọsọ ọkụ eletrik na-agafe agafe/gbawa mgbochi
Ụdị RF nkịtị emeere nhụsianya
Nnwale Ubi Igwe Ọdụdọ Igwe Ọdụdọ
Kọntaktị onye nrụpụta:
Ụlọ ọrụ Lantronix, Inc.
48 Nchọpụta
Suite 250
Irvine, Azu 92618 USA
Ekwentị: 949-453-3990
Fax: 949-453-3995

Nkwupụta nnabata RoHS, REACH na WEEE
Biko gaa leta http://www.lantronix.com/legal/rohs/ maka nkwupụta Lantronix gbasara nnabata RoHS, REACH na WEEE.

Ntuziaka njikọta nke sava XPort®

Akwụkwọ / akụrụngwa

LANTRONIX 900-310M XPort Embedded Ethernet Module [pdf] Ntuziaka nwụnye
900-310M, 900-310M XPort Embedded Ethernet Module, XPort Embedded Ethernet Module, Embedded Ethernet Module, Ethernet Module, Module

Ntụaka

Akwụkwọ ntuziaka onye ọrụ