Modul ebe nchekwa KLLISRE DDR4

Ngwaahịa gafereview

Ezubere modulu ebe nchekwa KLLISRE Desktop DDR4 maka ịgbakọ arụmọrụ dị elu, na-enye ọmarịcha ọsọ na ntụkwasị obi maka egwuregwu, imepụta ọdịnaya, yana ọrụ ịgbakọ kwa ụbọchị. Modul ndị a na-egosipụta ndị na-ekesa ọkụ na-egbuke egbuke maka ịrụ ọrụ ọkụ na nkwụsi ike ka mma.

Nkọwapụta

Nkọwapụta	Nkọwa
Ụdị ebe nchekwa	Ebe nchekwa Desktọpụ DDR4 (anaghị ebufe ya)
Ike dị	8GB, 16GB (Otu modul)
Ugboro dị	2666MHz, 3200MHz, 3600MHz
Voltage	1.2V
Nhazi Pin	288-ntụtụ
Mmezi mperi	Ndị na-abụghị ECC
Edebara aha	Enwetaghị ya
CAS Latitude	CL21 (dabere na ugboro ole)
Ụdị Ihe	DIMM (Modul ebe nchekwa dị n'ịntanetị)
Onye na -agbasa okpomoku	Yes, aluminum heat spreader

Ndakọrịta
Ndị nne na nna desktọpụ nwere oghere DDR4

Ngwa dakọtara

Bọdụ ndị nne na nna akwadoro
KLLISRE Desktop DDR4 ebe nchekwa dakọtara na ọtụtụ ụdị nne na nna desktọpụ:

• Intel 600, 500, na 400 usoro chipsets (Z690, B660, H610, Z590, B560, wdg)
• AMD 500 na 400 usoro chipsets (X570, B550, X470, B450, wdg)
• Chipset ochie na-akwado ebe nchekwa DDR4

Ndị nhazi akwadoro
Ebe nchekwa a na-arụ ọrụ ma Intel na AMD nyiwe:

• Intel Core i3, i5, i7, i9 processors (10th, 11th, 12th, 13th Gen)
• AMD Ryzen 3, 5, 7, 9 processors (3000, 4000, 5000 usoro)

Nhazi ebe nchekwa

Maka ịrụ ọrụ kacha mma

• Wụnye ebe nchekwa na abụọ maka ịrụ ọrụ chanel abụọ (lelee akwụkwọ ntuziaka motherboard maka oghere ziri ezi)
• For best results, use identical memory modules with the same capacity and frequency
• Kwado XMP/DOCP na BIOS iji nweta ọsọ mgbasa ozi

Mara: Higher frequency memory (3600MHz) may require a more recent CPU and motherboard to achieve full speed. Always check your motherboard’s QVL (Qualified Vendor List) for compatibility.

Ntuziaka nwụnye

Ịdọ aka ná ntị: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components.

1. Gbanyụọ sistemu ahụ
   Gbanyụọ kọmputa kpamkpam wee kwupu eriri ọkụ niile na ọkụ ọkụ.
2. Mepee Akpa Kọmputa
   Wepu akụkụ akụkụ nke ikpe kọmputa gị iji nweta motherboard.
3. Chọta oghere ebe nchekwa
   Chọpụta oghere ebe nchekwa dị na motherboard gị. Lelee akwụkwọ ntuziaka nne na nna gị maka usoro ọnụọgụ ọnụ ọgụgụ kacha mma (na-abụkarị oghere 2 na 4 maka ọwa abụọ).
4. Hapụ obere vidiyo njide
   Mepee mkpado njide na nsọtụ abụọ nke oghere ebe nchekwa site na ịkwaga ha apụta.
5. Hazie modul ebe nchekwa
   Dozie notch na modul ebe nchekwa na igodo dị na oghere ebe nchekwa iji hụ na nghazi kwesịrị ekwesị.
6. Wụnye ebe nchekwa
   Firmly press down on the memory module until the retention clips snap into place automatically.
7. Tinyegharịa maka modul ndị ọzọ
   Ọ bụrụ na ị na-etinye ọtụtụ modul, megharịa usoro maka modul nke ọ bụla, na-agbaso usoro ọnụọgụgụ nke motherboard tụrụ aro.
8. Mechie Sistemu
   Replace the computer case panel, reconnect all cables, and power on the system.

Mara: After installing new memory, enter the system BIOS/UEFI to verify that all memory is detected and enable XMP/D.O.C.P. to achieve the advertised speed.

Nchọpụta nsogbu

System agaghị buut mgbe echichi

• Ihe nwere ike ịkpata: Improperly seated memory, incompatible memory, BIOS needs update.
• Ngwọta: Reseat memory modules, clear CMOS, update motherboard BIOS to latest version.

Naanị ebe nchekwa akụkụ ka achọpụtara

• Ihe nwere ike ịkpata: Improperly seated memory, incompatible memory population, faulty memory slot.
• Ngwọta: Reseat memory modules, consult motherboard manual for proper population order, try modules in different slots.

Ebe nchekwa anaghị agba ọsọ na ọsọ mgbasa ozi (3200/3600MHz)

• Why this happens: By default, DDR4 memory runs at a conservative JEDEC standard speed (usually 2133MHz or 2400MHz). To achieve the advertised higher speeds, you must enable the XMP (Extreme Memory Profilemaka sistemụ Intel ma ọ bụ DOCP (Direct Overclock Profile) maka sistemụ AMD na BIOS.
• Ihe kpatara ndị ọzọ: Some older CPUs or motherboards may not support higher memory speeds. The memory controller in your CPU has limitations, and motherboard topology can affect maximum achievable speed.

Ngwọta

1. Tinye BIOS / UEFI ntọala n'oge buut (na-emekarị site na ịpị DEL ma ọ bụ F2)
2. Chọta ntọala ebe nchekwa (na-abụkarị n'okpuru menu "Advanced" ma ọ bụ "overclocking" menu)
3. Kwado XMP (Intel) ma ọ bụ DOCP (AMD)
4. Họrọ pro kwesịrị ekwesịfile maka ọsọ ebe nchekwa gị
5. Chekwaa mgbanwe wee pụọ na BIOS
6. Ọ bụrụ na sistemụ anaghị akwụsi ike, melite BIOS ka ọ bụrụ ụdị kachasị ọhụrụ
7. Ọ bụrụ na nsogbu na-aga n'ihu, ịnwere ike iji aka hazie ọsọ na oge

Akwụsịghị sistemu ma ọ bụ mkpọka

• Ihe nwere ike ịkpata: Incompatible memory timing settings, overheating, insufficient power.
• Ngwọta: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy, test with one module at a time.

Mperi ihuenyo na-acha anụnụ anụnụ

• Ihe nwere ike ịkpata: Memory compatibility issues, processor incompatibility, incorrect timings.
• Ngwọta: Test each module individually, run memory diagnostic tools (Windows Memory Diagnostic or MemTest86), adjust BIOS memory settings.

Mara: If problems persist, test each memory module individually to identify potential faulty modules. Contact KLLISRE support if you suspect a defective product.

Ozi akwụkwọ ikike

• KLLISRE Desktop DDR4 Memory modules are covered by a one-year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
• Maka nkwupụta akwụkwọ ikike ma ọ bụ nkwado teknụzụ, biko kpọtụrụ nkwado KLLISRE na nkọwa ịzụrụ gị yana nkọwa nke okwu ahụ.
• Akwụkwọ ikike a anaghị ekpuchi mmebi sitere na mberede, ojiji, mmegbu, nrụnye na-ezighi ezi, ma ọ bụ mgbanwe na-akwadoghị.

© 2023 KLLISRE. Ikike niile echekwabara. KLLISRE bụ ụghalaahịa edenyere n'akwụkwọ. Nkọwapụta nwere ike ịgbanwe na-enweghị ọkwa.

Ajụjụ a na-ajụkarị

Can I mix different capacities of KLLISRE Desktop DDR4 Memory modules?

While it is possible to mix different capacities, it is recommended to use identical memory modules for optimal performance.

Is it necessary to enable XMP/D.O.C.P. in BIOS after installing KLLISRE Desktop DDR4 Memory?

Enabling XMP/D.O.C.P. in BIOS is recommended to achieve the advertised speeds of the memory modules.

Akwụkwọ / akụrụngwa

Modul ebe nchekwa KLLISRE DDR4 [pdf] Akwụkwọ ntuziaka onye ọrụ Ụdị ebe nchekwa DDR4, DDR4, modul ebe nchekwa, modul

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ