Keeson RC302F Remote Control User Manual

Keeson RC302F Remote Control

Nkọwapụta

• Aha ngwaahịa: Njikwa dịpụrụ adịpụ
• Ụdị: RC302F
• Ntinye: 3 x Battery AAA 1.5V
• Onye nrụpụta: Ụgwọ nke ụlọ ọrụ Keeson Technology Corporation Limited
• Manufacturing Country: China

Ntuziaka ojiji

Ndozi ntọala

• Head Up: Press and hold the ‘HEAD UP’ button. The head actuator will move out. Release to stop.
• Head Down: Press and hold the ‘HEAD DOWN’ button. The head actuator will move in. Release to stop.
• Foot Up: Press and hold the ‘FOOT UP’ button. The foot actuator will move out. Release to stop.
• Foot Down: Press and hold the ‘FOOT DOWN’ button. The foot actuator will move in. Release to stop.
• Lumbar Up: Press and hold the ‘LUMBAR UP’ button. The lumbar actuator will move out. Release to stop.
• Lumbar Down: Press and hold the ‘LUMBAR DOWN’ button. The lumbar actuator will move in. Release to stop.
• Tilt Up: Press and hold the ‘TILT UP’ button. The head tilt actuator will move out. Release to stop.
• Tilt Down: Press and hold the ‘TILT DOWN’ button. The head tilt actuator will move in. Release to stop.

Ọrụ Pụrụ Iche

• UBB (Underbed Light): Click the ‘UBB’ button to turn the underbed light on or off.
• Massage Head +: Click the ‘MASSAGE HEAD +’ button to cycle through head massage intensity levels (0-1-2-3).
• Massage Head -: Click the ‘MASSAGE HEAD -‘ button to gradually decrease head massage intensity (3 levels).
• Massage Foot +: Click the ‘MASSAGE FOOT +’ button to cycle through foot massage intensity levels (0-1-2-3).
• Massage Foot -: Click the ‘MASSAGE FOOT -‘ button to gradually decrease foot massage intensity (3 levels).
• Oge ịhịa aka n'ahụ: If massage motors are active, click this button to switch the massage time. Setting the timer to ‘0’ will turn off the massage. This button is inactive if massage motors are off.
• Ewepụghị: Click the ‘FLAT’ button to return the bed to a flat position. The process will stop if any other button is clicked during movement.
• Zero G (ZG): Click the ‘ZG’ button to move the bed to the Zero Gravity position. The movement will stop if any other button is clicked during the process.
• Memory Position: Click the ‘MEMORY POSITION’ button to move the bed actuators to a pre-set memory position.

gafereview

1. Isi elu
   Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released.
2. Isi ala
   Press and hold the HEAD DOWN button of the remote, the head actuator moves in, and stops when released.
3. Were ụkwụ elu
   Press and hold the FOOT UP button of the remote, the foot actuator moves out, stop when released.
4. gbadaa
   Press and hold the FOOT DOWN button of the remote, the foot actuator moves in, stop when released.
5. Lumbar up
   Press and hold the LUMBAR UP button of the remote. The lumbar actuator moves out and stops when released.
6. Lumbar down
   Press and hold the LUMBAR DOWN button of the remote, the lumbar actuator moves in, and stops when released.
7. Tụgharịa elu
   Press and hold the TILT UP button of the remote, the head tilt actuator moves out, and stops when released.
8. Tụgharịa ala
   Press and hold the TILT DOWN button of the remote, the head tilt actuator moves in, and stops when released.
9. UBB
   Click the Underbed light button to open or shut the light under the bed.
10. Massage head +
    Click the MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
11. Massage foot +
    Click the MASSAGE Foot button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
12. Massage head –
    Clicking will cause the intensity of the head massage to gradually decrease, with a total of 3 levels.；
13. Massage foot –
    Clicking will cause the foot massage intensity to cycle and decrease gradually, with a total of 3 levels.；
14. Oge ịhịa aka n'ahụ
    If the massage motors do not work, the button is invalid. If the massage motors work, click the button to switch the massage time. When the massage time switches to 0, turn off the massage.
15. Dị larịị
    Click the FLAT button, and the bed goes flat. Stop when you click any button during the process of going flat.
16. bọtịnụ ZG
    Click the ZG button, the actuator moves to the ZG position, and stops when any button is clicked during the movement.
17. Ọnọdụ ebe nchekwa
    Click the memory position to move the actuator to the memory position.

Nkwupụta FCC

FCC ịdọ aka ná ntị
A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ Klas B, dịka akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta, na-eji, ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:

• Megharịa ma ọ bụ bugharịa antenna nnata.
• Mee ka nkewa dị n'etiti akụrụngwa na nnata.
• Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata.
• Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.

Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ọrụ ahụ.
Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:

1. Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana
2. Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.

Ozi ngosi RF

• Atụlela ngwaọrụ a iji mezuo ihe achọrọ mkpughe RF izugbe. Enwere ike iji ngwaọrụ ahụ na ọnọdụ mkpughe na-enweghị mmachi.

ISED RSS ịdọ aka ná ntị
Ngwaọrụ a na-akwado Innovation, Sayensị na mmepe akụ na ụba Canada akwụkwọ ikike (s) RSS enweghị ikike. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:

1. This devicemay not cause interference, and
2. Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla, gụnyere nnyonye anya nwere ike bute ịrụ ọrụ ngwaọrụ a na-achọghị.

Nchọpụta nsogbu

• Remote anaghị aza: Ensure batteries are correctly inserted and not depleted. Replace with new AAA 1.5V batteries if necessary.
• Bed not moving: Check if the remote’s batteries are working. Ensure no obstructions are preventing bed movement. If the bed is stuck, try pressing the ‘FLAT’ button.
• Massage not working: Ensure the massage motors are turned on. The ‘Massage Timer’ button will be invalid if the motors are off.
• Ngosipụta RF: Atụlela ngwaọrụ a iji zuo oke mkpughe RF izugbe enwere ike iji ya na ọnọdụ mkpughe na-enweghị mmachi.

Ajụjụ

• Q: What type of batteries does the remote use?
  • A: The RC302F remote control uses 3 x AAA 1.5V batteries.
• Q: How do I stop the bed from moving to a preset position (eg, Flat or Zero G)?
  • A: You can stop the bed’s movement to a preset position by clicking any other button on the remote during the process.
• Ajụjụ: Enwere m ike ịhazigharị ike ịhịa aka n'ahụ?
  • A: Yes, you can increase head/foot massage intensity using ‘MASSAGE HEAD +’ / ‘MASSAGE FOOT +’ buttons and decrease it using ‘MASSAGE HEAD -‘ / ‘MASSAGE FOOT -‘ buttons. There are 3 levels of intensity.
• Q: What does the UBB button do?
  • A: The UBB button controls the underbed light, turning it on or off with a click.
• Q: What should I do if the remote isn’t working after changing batteries?
  • A: Ensure the new batteries are inserted with the correct polarity. If the issue persists, contact Keeson Technology Corporation Limited customer support.