Juniper NETWORKS PTX Series Paragon Automation 2.1.0 Onboard Device

Nkọwapụta:

• Product Name: Juniper Paragon Automation 2.1.0
• Supported Network Devices: ACX Series, MX Series, PTX Series, Cisco Systems devices
• Compatibility: Works with Super User or Network Admin role in Paragon Automation

Ntuziaka ojiji:

1. Nzọụkwụ 1: Malite

Ngwa netwọk akwadoro:

1. You can onboard ACX Series, MX Series, PTX Series, and Cisco Systems devices to Paragon Automation for management.

Wụnye ngwaọrụ:

1. Follow the hardware documentation to unbox, mount, and power on the device. Refer to model-specific Hardware Guide for details. For devices from other vendors, follow respective vendor instructions.

Ihe achọrọ:

1. Ensure Paragon Automation is installed.
2. Superuser in Paragon Automation is set up.

Nzọụkwụ 2: Gaa na-agba ọsọ

N'ime ngwaọrụ Juniper:

1. Navigate to Inventory > Network Inventory on Paragon Automation GUI.
2. Click Add Device on Routers tab.
3. Click Adopt Router and select the site where the device is installed.
4. Copy the CLI commands provided for SSH configuration.
5. Access the device via SSH, paste commands, and commit configuration.
6. Move device to In Service for service provisioning.

Onboard a Device by Using ZTP:

Ihe achọrọ:

1. Create an onboarding script (Python or SLAX) with outbound SSH configuration statements.
2. Refer to API Docs in the Paragon Automation GUI Help menu for using the getOutboundSshCommand REST API.

Nchịkọta

• This guide walks you through the steps to onboard a router (both Juniper and non-Juniper) to Paragon Automation, so that the device can be managed, provisioned, and monitored through automated workflows.
• Use this guide if you are a user with the Super User or Network Admin role in Paragon Automation.

Ngwa netwọk akwadoro

• Ị nwere ike ịbanye n'ụgbọ ACX Series, MX Series, PTX Series, na Cisco Systems ngwaọrụ ndị edepụtara na Hardware na-akwado Paragon Automation ma jikwaa ha.

Wụnye ngwaọrụ

• Follow the instructions in the hardware documentation to unbox the device, mount it on a rack, and power on the device. For details about installing a device, follow the instructions in the model-specific Hardware Guide on the

Supported Hardwar.

• To install devices from other vendors, follow the instructions from the respective vendors.

Ihe achọrọ

Gbaa mbọ hụ na emezuru ihe ndị a chọrọ tupu ịbanye na ngwaọrụ na Paragon Automation:

1. Awụnyela paragon Automation. Lee ntuziaka nwụnye Paragon Automation.
2. Onye nlekọta na Paragon Automation nwere:
   1. a. Mepụtara nzukọ na saịtị nke enwere ike ịbanye na ngwaọrụ ahụ.
   2. b. Added one or more users with the Network Admin role.
   3. For more information, see Paragon Automation Quick Start Guide.
3. Onye superuser ma ọ bụ onye nchịkwa netwọk nwere:
   1. Na Paragon Automation, ọdọ mmiri akụrụngwa netwọkụ mepụtara, ngwaọrụ na interface profiles, na atụmatụ mmejuputa netwọkụ.
   2. Na ngwaọrụ:
   3. Lelee ma ọ bụrụ firewall dị n'etiti Paragon Automation na ngwaọrụ ahụ. Ọ bụrụ na firewall dị, a na-ahazi firewall ka o kwe ka ịpụ na ọdụ ụgbọ mmiri TCP 443, 2200, 6800, 4189, na 32,767.
   4. Ụzọ kwụ ọtọ ahaziri na ngwaọrụ ahụ iji ruo Paragon Automation. Ihe na-esonụ bụ example of a command to configure static route: user@device# set routing-options static route 0.0.0.0/0 next-hop Gateway-IP-address
   5. Haziri sava DNS na ngwaọrụ ahụ iji dozie aha ngalaba ma ọ bụ kwe ka ngwaọrụ ahụ nweta sava DNS mpụga (maka examplee, 8.8.8.8).
   6. Haziri sava NTP na ngwaọrụ ahụ.

Nzọụkwụ 2: Gaa na-agba ọsọ

N'ime ngwaọrụ Juniper

Iji banye na ngwaọrụ Juniper gaa Paragon Automation, ị ga-emerịrị iwu SSH na-apụ apụ iji jikọọ na Paragon Automation, na ngwaọrụ ahụ. Usoro a nke ịbanye n'ime ngwaọrụ site na ime iwu SSH na-apụ apụ ka a na-akpọkwa "Idobe ngwaọrụ".

Ị nwere ike ịbanye na ngwaọrụ Juniper gaa Paragon Automation site na iji ụzọ ndị a:

• Onboard a Juniper device.
• Gaa na ngwaọrụ site na iji ZTP.

To onboard a non-Juniper device.

• NOTE: Among non-Juniper devices, only Cisco Systems devices are supported in this release. For a list of supported Cisco Systems devices.

N'ime ngwaọrụ Juniper

• Paragon Automation na-enye nhazi SSH na-apụ apụ nke ị nwere ike ịme na ngwaọrụ ahụ iji mee ka ngwaọrụ ahụ jikọọ na Paragon Automation.
• Ịbanye na ngwaọrụ Juniper site na ịme nhazi SSH:

1. Gaa na Ndepụta Ngwaahịa> Network Inventory na Paragon Automation GUI.
2. Na Routers taabụ, pịa Tinye Ngwaọrụ.
3. On the Add Devices click Adopt Router.
4. Pịa Họrọ saịtị ndetu ndetu ka ịhọrọ saịtị ebe etinyere ngwaọrụ ahụ.
   1. Nhazi SSH na-apụ apụ nke achọrọ maka ngwaọrụ iji guzobe njikọ na Paragon Automation na-egosipụta.
5. Pịa Detuo Cli Commands ka idetuo iwu CLI n'okpuru tinye iwu CLI ndị a ka ịnakwere ngwaọrụ Juniper ma ọ bụrụ na ọ dabara ngalaba chọrọ ka clipboard wee mechie OK.
6. Nweta ngwaọrụ site na iji SSH wee banye na ngwaọrụ na ọnọdụ nhazi.
7. Tapawa ọdịnaya nke klipbọọdụ wee tinye nhazi na ngwaọrụ ahụ.
   • Ngwa a na-ejikọ na Paragon Automation na enwere ike ijikwa ya site na Paragon Automation.
   • After you adopt a device, you can verify connectivity status by running the following command on the device: user@host> show system connections |match 2200 tcp 0 0 ip-address:38284 ip-address:2200 ESTABLISHED
   • 6692/sshd: jcloud-stcp 0 0 <varname>ip-address</varname>:38284 <varname>ip-address</varname>:2200 ESTABLISHED 6692/sshd: Established in the output indicates that the device is connected with Paragon Automation.

• After the device is onboarded, the status of the device on the Inventory  (Inventory > Devices > Network Inventory) shows as Connected, You can now start managing the device. See Device Management Workflow.
• Ọzọkwa, ị nwere ike ibugharịa ngwaọrụ na In Service mgbe onboarding ka ọrụ nwere ike nyere na ngwaọrụ. Hụ kwado ngwaọrụ maka ọrụ.
• Gaa na ngwaọrụ site na iji ZTP

Ihe achọrọ:

• (Recommended) A network implementation plan should be configured for the device.
• Ngwaọrụ kwesịrị ịbụ zeroized ma ọ bụ na ntọala ụlọ nrụpụta ya.
• Ihe nkesa TFTP nwere ike ịnweta site na ngwaọrụ ahụ.
• Ihe nkesa DHCP nwere ike ịnweta site na ngwaọrụ ahụ, nwere ike ịzaghachi ngwaọrụ ahụ na sava TFTP na nhazi file (Python ma ọ bụ SLAX edemede) aha.

Ịbanye na ngwaọrụ site na iji ZTP:

1. Mepụta edemede onboarding (na Python ma ọ bụ SLAX) site na ịchekwa nkwupụta nhazi SSH na-apụ apụ na a file. Ị nwere ike nweta nkwupụta nhazi SSH na-apụ apụ site na iji getOutboundSshCommand REST API.
   1. Hụ API Docs n'okpuru menu enyemaka nke Paragon Automation GUI maka ozi gbasara iji API.
2. Bulite edemede onboarding na sava TFTP.
3. Hazie ihe nkesa DHCP na ederede onboarding fileaha na ụzọ na sava TFTP.
4. Install the device, connect it to the network, and power it on the device.
   1. Maka ozi gbasara ịwụnye ngwaọrụ, hụ ntuziaka ngwaike dị na https://www.juniper.net/documentation/.
   2. Mgbe agbanyere ngwaọrụ ahụ:
      1. a. Ntọala ndabara ụlọ ọrụ dị na ngwaọrụ ahụ na-ebute edemede arụnyere (ztp.py) nke na-enweta adreesị IP maka njikwa njikwa, ọnụ ụzọ ndabara, sava DNS, sava TFTP, yana ụzọ nke edemede onboarding (Python ma ọ bụ SLAX) na. ihe nkesa TFTP, sitere na sava DHCP.
      2. b. The device configures its management IP address, static default route, and the DNS server address, based on the values obtained from the DHCP network.
      3. c. Ngwaọrụ ahụ na-ebudata scripting onboarding, dabere na ụkpụrụ sitere na netwọk DHCP, wee mee ya, na-ebute nkwupụta nhazi onboarding.
      4. d. Ngwa ahụ na-emepe nnọkọ SSH na-apụ apụ na Paragon Automation dabere na nhazi n'ime ụgbọ mmiri.
5. After the device connects with Paragon Automation, Paragon Automation configures management and telemetry parameters, including NMI by using NETCONF. Paragon Automation also uses NETCONF to configure the interfaces and protocols based on the network implementation plan associated with the device.
6. Banye na Paragon Automation GUI na view the status of device onboarding on the Inventory (Inventory > Devices > Network Inventory). After the device status changes to Connected, you can start managing the device. See Device Management Workflow for details.

• Sample Edemede Onboarding maka ime nhazi SSH na ngwaọrụ

Ihe na-esonụ bụ dị kaample nke script onboarding nke ebudatara na sava TFTP na ngwaọrụ:

N'ime ngwaọrụ na-abụghị Juniper

IHE: In this release, you can onboard a non-Juniper device by using REST APIs. Onboarding a non-Juniper device by using GUI is a Beta feature and may not work as expected. See Help > API Docs for information about Paragon Automation REST APIs.

Ịbanye ngwaọrụ na-abụghị Juniper:

1. Gaa na Ndepụta Ngwaahịa> Network Inventory na Paragon Automation GUI.
2. Na Routers taabụ, pịa Tinye Ngwaọrụ.
3. On the Add Devices click Adopt a Device.
4. In the Adopt a Device section, enter the device details—Device name, IPv4 address and port, site, vendor, model, operating system, connection timeout (in minutes), and retry delay (in minutes).
5. Under Authorization, click:
   1. Upload a Certificate to use TLS certificates to authenticate the device.
      1. If you use the Upload a Certificate option, upload:
         1. Asambodo TLS maka ngwaọrụ dị na Asambodo.
         2. Igodo asambodo maka ngwaọrụ dị na Asambodo igodo.
         3. Root certificate of the Certificate Authority (CA) in the Certificate Authority.
         4. Credentials to authenticate by using username and password.
      2. If you use the Credentials option, enter the username and password to authenticate the device.
6. Pịa OK.
   1. Paragon Automation connects with the device. You can now manage the device by using Paragon Automation.

After the device connects with Paragon Automation, you can view the details of the device on the Inventory (Inventory > Devices > Network Inventory).

Nzọụkwụ 3: Gaa n'ihu

Gịnị na-esote

• Ugbu a ị banyere n'ime ngwaọrụ ahụ, ebe a bụ ụfọdụ ihe ị ga-achọ ime ọzọ.

Ozi izugbe

(Na-aga n'ihu)

Jiri vidiyo mụọ ihe
Our video library continues to grow! Here are some great videos and training resources that will help you expand your knowledge of Juniper Network Products.

• Juniper Networks, akara Juniper Networks, Juniper na Junos bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Juniper Networks, Inc. na United States na obodo ndị ọzọ.
• ụghalaahịa ndị ọzọ niile, akara ọrụ, akara edenyere n'akwụkwọ, ma ọ bụ akara ọrụ edebanyere aha bụ ihe onwunwe nke ndị nwe ha.
• Juniper Networks anaghị ewere ọrụ maka ezighi ezi ọ bụla na akwụkwọ a. Netwọk Juniper nwere ikike ịgbanwe, gbanwee, nyefee, ma ọ bụ megharịa akwụkwọ a na-enweghị ọkwa.
• Nwebiisinka © 2025 Juniper Networks, Inc. Ikike niile echekwabara.

FAQ

Q: What devices can be managed with Juniper Paragon Automation?

A: Supported devices include ACX Series, MX Series, PTX Series, and select Cisco Systems devices.

Q: What are the prerequisites for onboarding a device using ZTP?

A: Prerequisites include creating an onboarding script with outbound SSH configurations and utilizing the getOutboundSshCommand REST API.

Akwụkwọ / akụrụngwa

Juniper NETWORKS PTX Series Paragon Automation 2.1.0 Onboard Device [pdf] Ntuziaka onye ọrụ ACX Series, MX Series, PTX Series, PTX Series Paragon Automation 2.1.0 Onboard Device, Paragon Automation 2.1.0 Onboard Device, Automation 2.1.0 Onboard Device, Onboard Device

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ