Akwụkwọ ntuziaka Kaadị Interface InLine 51127A

InLine 51127A Interface Card 
Instruction Manual

OZI IZUGBE

Nkwenye:
This user manual applies to the following product: · 51127A InLine® Quad Gigabit network card, 4x RJ45 2.5Gb/s, PCIe x4, incl. low profile ihe nkwado

Onye nrụpụta: INTOS ELECTRONIC AG Siemensstraße 11 D-35394 Gießen service@inline-info.com
Ụbọchị: 06/2024

Ọdịnaya nke nnyefe

1x InLine® Quad Gigabit Ethernet PCIe Adapter
1x Low-profi le slot bracket
1 x CD ọkwọ ụgbọ ala
1x ntuziaka ntuziaka (German/Bekee)

Biko lelee ọdịnaya nke nnyefe maka izu oke. Ọ bụrụ na akụrụngwa dị n'otu n'otu na-efu, biko kpọtụrụ onye na-ere gị.

Nkọwa nke akara ịdọ aka na ntị

Akara a na-egosi ozi na-enye aka na nghọta ka mma.
Akara a na-egosi na enwere nnukwu ihe egwu dị na ahụike mmadụ.

Ezubere iji

This InLine® Quad Gigabit Ethernet adapter is an additional card for plugging into the computer.

• Enwere ike iji ya na Windows PC na Linux
• Installation in a free PCIe slot on the computer`s mainboard

Ịdọ aka ná ntị izugbe

• Emepela ụlọ maka nrụnye ruo mgbe akwụsịla isi iyi ike
• Chebe site na uzuzu na mmiri mmiri

Ọ bụrụ na ụlọ kọmputa na-emeghe, enwere ike imetụ akụkụ ndị dị ndụ aka, enwere ihe ize ndụ nke ujo eletrik na ntinye nwere ike ịbụ nke ụlọ ọrụ pụrụ iche ga-arụ.

Iji ejighị n'aka

A na-ahụta ihe ndị a na-ekwesịghị ekwesị n'echiche nke iji nhụsianya a na-ahụ anya:

• Install the PCI adapter in the correct slot, otherwise the computer and card may be damaged.
• Zere ihe omume nke obere sekit ma ọ bụ gafere mgbe echichi.

Okwu mmalite

This InLine® Quad Gigabit Ethernet PCIe adapter is a high performance 10/100/1000/2.5G BASE-T Ethernet LAN controller, which is perfect for home and office use. It offers a cost-effective solution for connecting to a network at a data transfer rate of up to 2500 Mb/s and can be used with any Cat.5e cabling or higher up to a maximum distance of 100 metres without any problems.

NKWU usoro

• Mainboard nwere oghere PCIe dị
• Na-akwado sistemụ arụmọrụ
• Ngwa anya maka nrụnye ọkwọ ụgbọala
• Enwere ike ibudata ọkwọ ụgbọala nhọrọ site na ibe na-esonụ: www.inline-info.com/downloadcenter

Tupu ịwụnye na ịgbalite kaadị interface, biko hụ na ị nwere nkwado ndabere zuru oke nke data gị dị na diski ike. Ọ bụghị onye nrụpụtara maka ịnyefe data n'ihi iji eme ihe n'ụzọ na-ezighị ezi, itinye n'ọrụ ma ọ bụ nleghara anya. Ọ bụrụ na ị nwere nsogbu nrụnye, biko kpọtụrụ onye na-ere ahịa gị.

Atụmatụ / Nkọwapụta

• Chipset Realtek RTL8125B
• 10 / 100 / 1000 / 2500 Mb/s data rate
• Complies with PCI Express revision V2.1
• 2-Lane PCI Express bus connecting with up to 10 Gb/s bus width
• PCI Express interface: x4
• Supports Wake-On-LAN and `RealWow!’ Technology (remote wake-up)
• Supports jumbo frames up to 16KB
• Fully compliant with IEEE 802.3, 802.3u, 802.3ab
• Crossover detection and auto-correction mode
• Supports Microsoft Windows Vista or newer, Server 2008 or newer, Linux Kernel 2.4.x or newer
• Supports 1-Lane 2.5/5 Gb/s PCI Express Bus
• Supports 2.5G and 1G Lite mode
• Mkparịta ụka akpaaka na ike ihu ibe agbatịkwuru (XNP)
• Supports pair swap/polarity/skew correction
• Supports hardware ECC (Error correction code) function
• Supports hardware CRC (Cyclic Redundancy Check) function
• Na-akwado PCI MSI (Nkwụsịtụ akara ngosi ozi) na MSI-X
• Transmit/Receive on-chip buffer support
• Supports ECMA-393 ProxZzzy Standard for sleeping hosts
• Supports IEEE1588v1, IEEE1588v2, IEEE80.2AS time synchronization
• Supports IEEE802.1Qav credit-based shaper algorithm
• Supports IEEE802.1P Layer 2 priority encoding
• Na-akwado IEEE802.1ad Ugboro abụọ VLAN
• Supports IEEE802.3az (Energy Efficient Ethernet, EEE)
• Supports IEEE802.3bz (2.5GBase-T)
• Supports Virtual Machine Queue(VMQ)
• Supports quad core Receive ­Side Scaling(RSS)
• Na-akwado nbudata Protocol (ARP&NS)
• Backwards compatible with 10/100BASE-TX networks
• Compatible with existing CAT-5e UTP cabling or higher
• Supports full duplex flow control (IEEE 802.3x)
• Na-akwado IEEE 802.1Q VLAN tagging

AKWDKWỌ AKWKWỌ

1. Gbanyụọ kọmputa gị na ngwaọrụ mpụga niile ejikọrọ na ya
2. Disconnect your computer from the power source, unplug the power cable, disconnect all peripheral devices
3. Mepee akpa kọmputa ahụ. Gaa na ntuziaka kọmpụta maka nkọwa ndị ọzọ
4. Chọta oghere PCIe efu wee wepụ ihe nkwado oghere. Chekwaa skru maka iji mechaa
5. Dozie kaadị ahụ n'ụzọ kwụ ọtọ na oghere PCIe ma tinye ya nke ọma na nke ọma n'ime oghere ahụ
6. Ozugbo itinyere kaadị ahụ nke ọma n'ime oghere ahụ, chekwaa ya na ebe obibi kọmputa site na iji screw njide
7. Connect the system to the network by plugging the 8-wire Cat.5e or Cat.6 cable (not included) into the RJ45 connector on the network card
8. Mechie ma chekwaa ụlọ kọmputa ahụ. Gbanwee na kọmputa gị mgbe ijikọchara ngwaọrụ niile dị n'akụkụ yana eriri ọkụ

Ịwụnye ọkwọ ụgbọala

1. Start Windows and insert the driver CD into the optical drive.
2. Open one of the following folders on the driver CD, depending on your operating system:
   • For Windows 7, Server 2008 R2 (32/64 bit): [Letter of the optical drive]:\RTL8125\Windows\Win7_Server2008 R2\Install_Win7_7127_10222019, double-click the „setup.exe“ fi le
   • For Windows 8, 8.1, Server 2012 (32/64 bit): [Letter of the optical drive]:\RTL8125\Windows\Win8_8.1_Server2012\Install_Win8_8.1_8073_10222019, double-click the „setup.exe“ fi le
   • For Windows 10 (32/64 bit): [Letter of the optical drive]:\RTL8125\Windows\Win10\Install_Win10_10036_10222019, double-click the „setup.exe“ fi le
   • For Windows 11 (32/64 bit): [Letter of the optical drive]:\RTL8125\Windows\Win11\, double-click the „Install_PCIE_Win11_11.4.1201.2021_01182022.exe“ fi le
3. Follow the instructions on the screen to install the driver
4. Once the driver installation is complete, you can use the device properly.

Ọkwọ ụgbọala emelitere:

Enwere ike ịchọta ndị ọkwọ ụgbọ ala ọhụrụ na mgbanwe kachasị ọhụrụ na akwụkwọ a ebe a: https://www.inline-info.com/downloadcenter

Mwepu

Ngwa eletriki na eletrọnịkị yana batrị agaghị eji mkpofu ụlọ tụfuo ya. Onye na-azụ ahịa nwere iwu iji weghachi ngwa eletriki na ngwa eletrọnịkị na batrị na njedebe nke ndụ ọrụ ha na ebe nnakọta ọha edobere maka ebumnuche a ma ọ bụ ruo ebe ire ere.

Nkwuwapụta EC dị mfe

Onye nrụpụta / onye mbubata:
Onye nwe akara ahia ahia:
INTOS ELECTRONIC AG Siemensstrasse 11 35394 Giessen

hereby declares that this InLine® Quad 2.5 Gigabit network card complies with all relevant provisions of the EMC (2014/30/EU) and ROHS (2011/65/EU + 2015/863/ EU) directives.

Akụkụ zuru oke nke Nkwupụta Nkwekọrịta EU dị na ndị a web adreesị:
https://www.inline-info.com/en/downloadcenter

NKWUKWU

Mbipụta nke mbụ Bekee 1/06
Documentation © 2024 INTOS ELECTRONIC AG All rights reserved. No part of this manual may be reproduced in any form or by any means, electronic, mechanical or chemical, without the prior written permission of the publisher. It is possible that this manual may still contain typographical defects or misprints. However, the information in this manual will be checked regularly and corrections will be made in the next edition. We accept no liability for errors of a technical or printing nature and their consequences. All trademarks and industrial property rights are acknowledged. Changes in the sense of technical progress can be made without prior notice. Our products, including packaging, are not toys, they may contain small parts and sharp objects.

Biko zere ụmụaka.