ọdịnaya zoo
1 Usoro ICON jikwaa TVL Series Tank ọkwa ọkwa na njikwa
2 Ntuziaka ojiji ngwaahịa
3 FAQ
4 Nkọwa akara
5 Ihe ndị bụ isi chọrọ
6 Nkọwapụta
7 Nkọwa akụkụ ihu
8 Ọrụ nke bọtịnụ Push
9 Eserese waya
10 Ntinye 4-20mA mmemme
11 Ndekọ ntọala nke ndị ọrụ adịghị mma
12 Akwụkwọ / akụrụngwa
12.1 Ntụaka
13 Ozi ndị metụtara

ICON-Usoro-njikwa-Akara ngosi

Usoro ICON jikwaa TVL Series Tank ọkwa ọkwa na njikwa

ICON-Usoro-njikwa-TVL-Series-Tank-Ọkwa-ngosi-na-njikwa-ngwaahịa.

Nkọwapụta

Izugbe

  • Ngosipụta: Klas nchekwa ihe nkwụsi ike n'ụkpụrụ ụkpụrụ egosipụtara

Ntinye nrịbama

  • Ọkọlọtọ Voltage: Ugbu a: 4-20mA 0-20mA 0-5V* 0-10V* 85 – 260V AC/DC 16 – 35V AC, 19 – 50V DC*

Nnyefe nrịbama mmepụta

  • Ọkọlọtọ Voltage: Mmepụta na-agafe agafe * 2 x Relays (5A) 1 x Relay (5A) + 4-20mA 24VDC 4-20mA (Operating Range Max. 2.8 - 24mA)

Arụmọrụ

  • izi ezi: Dabere na IEC 60770 - Ndozi ihe nkwụsịtụ na-abụghị Linearity Hysteresis Repeatability

Okpomọkụ

  • Na-arụ ọrụ Okpomọkụ

Akụsara mmiri

  • Ụlọ: Polycarbonate

Nọmba akụkụ

  • TVL-550-1821
  • TVL-550-1829

Ntuziaka ojiji ngwaahịa

Ihe ndị bụ isi chọrọ

  • Ejila nkeji ahụ n'ebe egwu gabiga oke egwu, ịma jijiji, uzuzu, iru mmiri, gas na-emebi emebi na mmanụ.
  • Ejila unit ahụ na mpaghara ebe enwere ihe egwu nke mgbawa.
  • Ejila nkeji ahụ na mpaghara nwere nnukwu mgbanwe okpomọkụ, ma ọ bụ ikpughe na condensation, ma ọ bụ ice.
  • Ọ bụghị onye nrụpụtara maka mmebi ọ bụla kpatara nrụnye na-ekwesịghị ekwesị, anaghị echekwa ọnọdụ gburugburu ebe obibi kwesịrị ekwesị, yana iji nkeji megidere ọrụ ya.
  • Ọ bụrụ na enwere ihe egwu dị oke egwu na nchekwa ma ọ bụrụ na otu unit adịghị arụ ọrụ, ekwesịrị iji sistemu nọọrọ onwe ya ọzọ.
  • Ngalaba ahụ na-eji volta dị ize ndụtage; hụ na agbanyụrụ ya ma kepụ ya na ike tupu ịme nchọpụta nsogbu.
  • Zere ịkwasa, rụkwaa ma ọ bụ gbanwee unit ahụ n'onwe gị.
  • Ekwesịrị idobe nkeji adịghị mma maka ndozi na ebe ọrụ enyere ikike.

Nkọwa akụkụ ihu

  • Ogwe dị n'ihu gụnyere atụmatụ dị ka ihe ngosi ọkụ ọkụ, ihe nnata infrared, nnukwu ngosi na-egbuke egbuke, bọtịnụ mmemme, na bọtịnụ Push ọrụ.

Eserese waya

  • Rụtụ aka na eserese wiring maka nrụnye kwesịrị ekwesị. Gbaa mbọ hụ na njikọ ziri ezi dabere na nhazi relay yana ihe ntinye / mmepụta ihe chọrọ.

EGBU WIRE

  • Iji gbochie ndabichi na nrụnye ụlọ ọrụ, soro usoro kwesịrị ekwesị iji hụ na unit ahụ na-arụ ọrụ nke ọma.

FAQ

Ajụjụ: Enwere m ike ịrụkwa unit ahụ n'onwe m ma ọ bụrụ na ọ daa?

A: Mba, anwala ịrụkwa ma ọ bụ gbanwee unit ahụ n'onwe gị.
Ekwesịrị idobe nkeji adịghị mma maka ndozi na ebe ọrụ enyere ikike.

Ajụjụ: Kedu ihe m ga-eme ma ọ bụrụ na ekpughere akụkụ ahụ na oke okpomọkụ?

A: Ejila nkeji ahụ na mpaghara nwere nnukwu mgbanwe okpomọkụ, mkpughe na condensation, ma ọ bụ ice. Gbaa mbọ hụ na ọnọdụ gburugburu ebe obibi kwesịrị ekwesị maka ịrụ ọrụ kacha mma.

  • Gụọ akwụkwọ ntuziaka onye ọrụ nke ọma tupu ịmalite iji otu.
  • Onye nrụpụta nwere ikike ime mgbanwe na-enweghị ọkwa mbụ.

Nkọwa akara

Akara a na-egosi ntuziaka dị mkpa gbasara nrụnye na ịrụ ọrụ nke ngwaọrụ. Esoghị ụkpụrụ nduzi nke akara a gosipụtara nwere ike bute ihe mberede, mmebi ma ọ bụ mbibi akụrụngwa.

Ihe ndị bụ isi chọrọ

Nchekwa onye ọrụ

  • Ejila nkeji ahụ n'ebe egwu gabiga oke egwu, ịma jijiji, uzuzu, iru mmiri, gas na-emebi emebi na mmanụ.
  • Ejila unit ahụ na mpaghara ebe enwere ihe egwu nke mgbawa.
  • Ejila nkeji ahụ na mpaghara nwere nnukwu mgbanwe okpomọkụ, ma ọ bụ ikpughe na condensation ma ọ bụ ice.
  • Ọ bụghị onye nrụpụtara maka mmebi ọ bụla kpatara nrụnye na-ekwesịghị ekwesị, anaghị echekwa ọnọdụ gburugburu ebe obibi kwesịrị ekwesị, yana iji nkeji megidere ọrụ ya.
  • Ọ bụrụ na n'ihe banyere otu unit na-adịghị arụ ọrụ, enwere ihe ize ndụ nke egwu dị egwu na nchekwa nke ndị mmadụ ma ọ bụ ihe onwunwe agbakwunyere, a ghaghị iji usoro ndị nọọrọ onwe ha na ngwọta iji gbochie ụdị iyi egwu dị otú ahụ.
  • Ngalaba ahụ na-eji volta dị ize ndụtage nke nwere ike ime ka ihe mberede na-egbu egbu. A ghaghị gbanyụọ unit ahụ ma wepụ ya na ọkụ ọkụ tupu ịmalite ntinye nke nchọpụta nsogbu (n'ihe banyere adịghị arụ ọrụ).
  • Anwala ịkwasa, rụkwaa ma ọ bụ gbanwee unit ahụ n'onwe gị. Ngalaba ahụ enweghị akụkụ ndị ọrụ ga-arụ ọrụ.
  • A ga-ebipụ nkeji ndị nwere ntụpọ ma nyefee ya maka nrụzi na ebe ọrụ enyere ikike.

Nkọwapụta

Izugbe
Ngosipụta LED | 4 x 20mm Elu | Uhie | Icha ọkụ nwere ike ịgbanwe
Ụkpụrụ egosiri -999 ± 9999 | -99999 ± 999999*
Nkwụsi ike 50 ppm | Celsius C
Usoro nnyefe 1200…115200 bit/s, 8N1/8N2
Klas nchekwa NEMA 4X | IP67
Nbanye Nbanye | Nkwanye
Ọkọlọtọ Ugbu a: 4-20mA | 0-20mA | 0-5V* | 0-10V*
Voltage 85 - 260V AC / DC | 16-35V AC, 19-50V DC*
Mgbama ngosi mmepụta | Nkwanye
Ọkọlọtọ 2 x Relays (5A) | 1 x Relay (5A) + 4-20mA
Voltage 24VDC
Mmepụta ugbu a na-agafe agafe * 4-20mA | (Oké arụ ọrụ 2.8 - 24mA)
Arụmọrụ
Izi ezi 0.1% @ 25°C Otu ọjịji
Izi ezi Dị ka IEC 60770 si kwuo - Ndozi njedebe njedebe | Na-abụghị Linearity | Hysteresis | Nkwagharị ugboro ugboro
Okpomọkụ
Okpomọkụ arụ ọrụ -40 - 158°F | -40 - 70 Celsius
Akụrụngwa | Wetara mmiri
Ebe obibi Polycarbonate
Nọmba akụkụ Ntinye Mpụta
TVL-550-1821 4-20mA 2 ọsọ agba anọ
TVL-550-1829 4-20mA 4-20mA + 1 agbagharị agbagharị

Nkọwa akụkụ ihu

ICON-Usoro-njikwa-TVL-Series-Tank-Ọkwa-Ngosipụta-na-njikwa-FIG-1

Ọrụ nke bọtịnụ Push

Akara ejiri mee ihe na ntuziaka: [ESC/MENU]

  • ICON-Usoro-njikwa-TVL-Series-Tank-Ọkwa-Ngosipụta-na-njikwa-FIG-2Ọrụ:
  • Tinye na menu isi (pịa ma jide opekata mpe 2 sekọnd.)
  • Wepụ ihuenyo dị ugbu a wee banye na menu gara aga (ma ọ bụ ọnọdụ tụọ)
  • Kagbuo mgbanwe emere na oke a na-edezi

Akara ejiri mee ihe n'akwụkwọ ntuziaka: [ENTER]

  • ICON-Usoro-njikwa-TVL-Series-Tank-Ọkwa-Ngosipụta-na-njikwa-FIG-3Ọrụ:
  • Bido dezie oke
  • Tinye n'ime obere menu
  • Nkwenye nke mgbanwe emere na oke a na-edezi

Akara ejiri mee ihe n'akwụkwọ ntuziaka: [] []

  • ICON-Usoro-njikwa-TVL-Series-Tank-Ọkwa-Ngosipụta-na-njikwa-FIG-4Ọrụ:
  • Mgbanwe nke menu ugbu a
  • Mgbanwe nke oke uru
  • Mgbanwe nke ụdị ngosi

Eserese waya

Otu Nhazi RELAY Otu 4-20mAICON-Usoro-njikwa-TVL-Series-Tank-Ọkwa-Ngosipụta-na-njikwa-FIG-5

Nhazi 2 RELAYICON-Usoro-njikwa-TVL-Series-Tank-Ọkwa-Ngosipụta-na-njikwa-FIG-6

EGBU WIRE

  • Fanye screwdriver ma gbanye usoro mkpọchi waya mepere
  • Fanye waya
  • Wepu screwdriverICON-Usoro-njikwa-TVL-Series-Tank-Ọkwa-Ngosipụta-na-njikwa-FIG-7
  • N'ihi nnyonye anya dị ịrịba ama enwere ike na nrụnye ụlọ ọrụ, a ga-etinyerịrị usoro kwesịrị ekwesị na-emesi ike ịrụ ọrụ nke otu ahụ n'ọrụ.
  • Ejighi fiusi dị n'ime ma ọ bụ sekit ọkọnọ ike rụọ ya.
  • N'ihi nke a, a ga-eji ihe mpụga oge-egbu oge igbutu fiusi na obere ọnụ ugbu a bara uru (na-atụ aro bipolar, max. 2A) na ike ọkọnọ sekit breaker dị nso unit.
  • N'ihe banyere iji fuse monopolar, a ga-etinye ya na eriri nkeji.

Ntinye 4-20mA mmemme

ICON-Usoro-njikwa-TVL-Series-Tank-Ọkwa-Ngosipụta-na-njikwa-FIG-8 ICON-Usoro-njikwa-TVL-Series-Tank-Ọkwa-Ngosipụta-na-njikwa-FIG-9 Na-agbakọ ntinye 4-20mA

Ụdị ihe mmetụta 20mA Ntọala
Na-asọba mmiri Oke ihe mmetụta / Specific Gravity = 20mA
Ultrasonic Ogologo tankị
Rada Ogologo tankị

Relays mmemmeICON-Usoro-njikwa-TVL-Series-Tank-Ọkwa-Ngosipụta-na-njikwa-FIG-10Mmemme Modbus RS485

MODBUS Pro TOCOL ijikwa

  • Usoro mbufe: 1 mmalite bit, 8 bit data, 1 ma ọ bụ 2 nkwụsị nkwụsị (a na-ezigara ibe n'ibe 2, 1 na 2 ibe n'ibe na-anabata mgbe enwetara ya), enweghị njikwa nha anya.
  • Ọnụego Baud: enwere ike ịhọrọ site na 1200 ruo 115200 bits/sekọnd
  • Nzipu protocol: MODBUS RTU dakọtara
  • Akụkụ ngwaọrụ na uru ngosi dị site na interface RS-485, dị ka HOLDING ụdị ndekọ (ọnụọgụ ọnụọgụ na koodu U2) nke Modbus RTU protocol. Enwere ike ịgụ akwụkwọ ndekọ (ma ọ bụ otu nke ndekọ aha) site na ọrụ 03h wee dee 06h (otu ndekọ aha) ma ọ bụ 10h (otu nke ndekọ aha) dịka nkọwapụta Modbus RTU si dị. Oke otu kachasị maka ọrụ 03h na 10h enweghị ike gafere ndekọ 16 (maka otu etiti).
  • Ngwaọrụ na-atụgharị ozi mgbasa ozi mana ọ naghị ezipụ azịza ya.

Ndepụta nke ndị na-edeba aha

Debanye aha Dee Oke Deba aha nkọwa
01h Mba -999 ÷ 9999 Uru nha (enweghị ntụpọ ntụpọ)
02h Mba 0h, A0h, 60h Ọnọdụ nke nha dị ugbu a; 0h - data dị irè; A0h - oke oke nke oke nha gafere; 60h - oke ala nke oke nha gafere;
03h Ee 0 ÷ 3 “Pnt "parameter na"Na Pt” menu (ọnọdụ ntụpọ ntụpọ) 0 -"  0”; 1 -" 0.0”; 2 -" 0.00”; 3 -"0.000”
04h Ee hụ nkọwa. Ọnọdụ nke relays na oti mkpu LED (ụdị ọnụọgụ abụọ) (1 - on, 0 - gbanyụọ): 00000000 000e00ba a - relay R1; b - relay R2; e - LED mkpu;

Ọ bụrụ na edere ya, naanị a, na b ibe n'ibe dị mkpa (ndị ọzọ na-eleghara anya) ibe n'ibe ndị a na-enye onye ọrụ aka ịchịkwa relays site na interface RS-485.
05h1 Ee 0h ÷ 1800h Ọnọdụ mmepụta ugbu a na-arụ ọrụ, nke egosipụtara na nkeji 1/256 mA - ọ pụtara na byte dị elu na-egosipụta akụkụ integer na obere akụkụ byte dị ala nke mmepụta ihe achọrọ ugbu a.
Ee 2Ch÷1800h Ọnọdụ nke mmepụta ugbu a na-agafe agafe, nke egosipụtara na nkeji 1/256 mA - ọ pụtara na nnukwu byte na-egosipụta akụkụ integer na obere akụkụ byte nke dị ugbu a chọrọ.
Ee 0h ÷ 1600h Ọnọdụ ọrụ voltage mmepụta, nke egosipụtara na nkeji 1/512 V - ọ pụtara na elu byte na-egosipụta integer akụkụ, yana obere akụkụ byte dị ala nke mmepụta vol.tage.
06h Mba -999 ÷ 9999 Uru kacha elu (dobe) (enweghị ntụpọ ntụpọ)
10h Ee 0 ÷ 5 “ụdị"parameter na"Na Pt” menu (oke ntinye ntinye aha). 0 - 0-20 mA nso; 1 - 4-20 mA nso; 2 - 0-10 V nso; 3 - 2-10 V nso; 4 - 0-5 V nso; 5 - 1-5 V
11h Ee 0 ÷ 5 “CHAR"parameter na"Na Pt” menu (ụdị njirimara) 0 - linear; 1 - square; 2 - mgbọrọgwụ square; 3 – onye-akọwapụtara; 4 - njirimara olu nke tankị cylindrical na ọnọdụ kwụ ọtọ; 5 - njirimara olu nke tankị cylindrical na ọnọdụ kwụ ọtọ
12h Ee 0 ÷ 5 “FiLt"parameter na"Na Pt” menu (ọnụego nzacha nha)

Mmemme Modbus RS485

Debanye aha Dee Oke Deba aha nkọwa
13h Ee 0 ÷ 3 “Pnt "parameter na"Na Pt” menu (nnomi nke ndebanye aha 03h, ọnọdụ ntụpọ iri) 0 -" 0”; 1 -" 0.0”; 2 -" 0.00”; 3 -"0.000”
14h Ee -999 ÷ 9999 “Lo C"parameter na"Na Pt” menu, enweghị ntụpọ ngụkọ gụnyere
15h Ee -999 ÷ 9999 “Ndewo C"parameter na"Na Pt” menu, enweghị ntụpọ ngụkọ gụnyere
16h Ee 0 ÷ 999 “Lo r"parameter na"Na Pt"Menu, na 0.1%
17h Ee 0 ÷ 199 “Ndewo r"parameter na"Na Pt"Menu, na 0.1%
19h Ee 0 ÷ 9999 “t h1"parameter na"Na Pt” menu, enweghị ntụpọ ngụkọ gụnyere
1 ah Ee 0 ÷ 9999 “t h2"parameter na"Na Pt” menu, enweghị ntụpọ ngụkọ gụnyere
1 bh Ee 0 ÷ 9999 “t h3"parameter na"Na Pt” menu, enweghị ntụpọ ngụkọ gụnyere
1Ch Ee 0 ÷ 9999 “td"parameter na"Na Pt” menu, enweghị ntụpọ ngụkọ gụnyere
1Dh Ee 0 ÷ 9999 “t Sn"parameter na"Na Pt” menu, enweghị ntụpọ ngụkọ gụnyere
1 ehh Ee 0 ÷ 9999 “t Sh"parameter na"Na Pt” menu, enweghị ntụpọ ngụkọ gụnyere
20h2 Ee 0 ÷ 199 Adreesị ngwaọrụ
21h Mba 21F0h Koodu njirimara ngwaọrụ (ID)
22h3 Ee 0 ÷ 7 "BAud" paramita in "rS" menu (ọnụego baud);

0 - 1200 iberibe; 1 - 2400 iberibe; 2 - 4800 iberibe; 3 - 9600 iberibe;

4 - 19200 iberibe; 5 - 38400 iberibe; 6 - 57600 iberibe; 7 - 115200 n'arọ
23h4 Ee 0 ÷ 1 "mbAc" paramita in "rS" menu (ikike ide ndekọ site na interface RS-485); 0 – dee jụrụ ; 1 – dee kwere
24h Ee hụ nkọwa. Oke nke"SECU" menu (ụdị ọnụọgụ abụọ (0-"gbanyụọ", 1-"on"): ibe 0 -"nke r1” oke; ibe 1 -"nke r2” oke
25h Ee 0 ÷ 5 "rESP" paramita in "rS" menu (nkwụsị nzaghachi ọzọ);

0 - enweghị oge ọzọ; 1 –”10c” nhọrọ; 2 –”20c” nhọrọ;

3 –”50c” nhọrọ; 4 –”100c” nhọrọ; 5 –”200c” nhọrọ;
27h Ee 0 ÷ 99 "mbtO" paramita in "rS" menu (kacha egbu oge n'etiti okpokolo agba enwetara); 0 – enweghị igbu oge ịlele;

1 ÷ 99 – kacha egbu oge egosipụtara na sekọnd
2Dh Ee 1 ÷ 8 “Bri” oke (ngosiputa nchapụta);

1 - nchapụta kacha nta; 8 - nchapụta kachasị elu
2Fh Ee 0 ÷ 1 “Dezie” oke (ọnụọgụ paramita edit mode);

0 -"igwu” mode; 1 -"SLid" mode
30h Ee -999 ÷ 9999 “SEtP"parameter na"rEL1” menu, enweghị ntụpọ ngụkọ gụnyere
31h Ee -999 ÷ 999 “HySt"parameter na"rEL1” menu, enweghị ntụpọ ngụkọ gụnyere
32h Ee 0 ÷ 5 “modE"parameter na"rEL1menu:

0 -"mba” mode; 1 -"on” mode; 2 -"of” mode; 3 -"in” mode;

4 -"pụọ” mode; 5 -"mod" mode
33h Ee 0 ÷ 999 "t na" paramita n'ime "rEL1" menu, gosipụtara na nkeji iri nke sekọnd ma ọ bụ nkeji iri na-adabere na ya "otu" paramita – aha mba. 35h)

Mmemme Modbus RS485

Debanye aha Dee Oke Deba aha nkọwa
34h Ee 0 ÷ 999 "toFF" paramita n'ime "rEL1" menu, gosipụtara na nkeji iri nke sekọnd ma ọ bụ nkeji iri na-adabere na ya "otu" paramita – aha mba. 35h)
35h Ee 0 ÷ 1 "otu" paramita n'ime "rEL1" menu:

0 - sekọnd; 1 - nkeji
36h Ee 0 ÷ 2 "AL" paramita n'ime "rEL1" menu: 0 - enweghị mgbanwe; 1 - na; 2 - gbanyụọ
37h Ee -999 ÷ 9999 “SEt2"parameter na"rEL1” menu, enweghị ntụpọ ngụkọ gụnyere
38h Ee -999 ÷ 9999 “SEtP"parameter na"rEL2” menu, enweghị ntụpọ ngụkọ gụnyere
39h Ee -999 ÷ 999 “HySt"parameter na"rEL2” menu, enweghị ntụpọ ngụkọ gụnyere
 

3 ah

  

Ee

  

0 ÷ 5

 “modE"parameter na"rEL2menu:

0 -"mba” mode; 1 -"on” mode; 2 -"of” mode; 3 -"in” mode;

4 -"pụọ” mode; 5 -"ọnọdụ" mode
3 bh Ee 0 ÷ 999 "t na" paramita n'ime "rEL2" menu, gosipụtara na nkeji iri nke sekọnd ma ọ bụ nkeji iri dabere na ya "otu" paramita – aha mba. 3Dh)
3Ch Ee 0 ÷ 999 "toFF" paramita n'ime "rEL2" menu, gosipụtara na nkeji iri nke sekọnd ma ọ bụ nkeji iri dabere na ya "otu" paramita – aha mba. 3Dh)
3Dh Ee 0 ÷ 1 "otu" paramita n'ime "rEL2" menu:

0 - sekọnd; 1 - nkeji
3 ehh Ee 0 ÷ 2 "AL" paramita n'ime "rEL2" menu: 0 - enweghị mgbanwe; 1 - na; 2 - gbanyụọ
3Fh Ee -999 ÷ 9999 “SEt2"parameter na"rEL2” menu, enweghị ntụpọ ngụkọ gụnyere
50h Ee 0 ÷ 1 “modE"parameter na"Jide” menu (ụdị mgbanwe achọpụtara):

0 - ọnụ ọgụgụ kasị elu; 1 - tụlee
51h Ee 0 ÷ 9999 “PEA"parameter na"Jide” menu (mgbanwe kacha nta enwere ike ịchọpụta, enweghị ọnụọgụ iri gụnyere)
52h Ee 0 ÷ 199 “Oge"parameter na"Jide” menu, oge ngosipụta kacha elu (ma ọ bụ ọdịda) gosipụtara na sekọnd
53h Ee 0 ÷ 1 “HDS"parameter na"Jidemenu:

0 -"REAL” mode; 1 -"Jide" mode
54h Ee 0 ÷ 1 “H r1"parameter na"Jidemenu:

0 -"REAL” mode; 1 -"Jide" mode
55h Ee 0 ÷ 1 “H r2"parameter na"Jidemenu:

0 -"REAL” mode; 1 -"Jide" mode
58h1 Ee 0 ÷ 1 “Kwuonụ"parameter na"Jidemenu:

0 -"REAL” mode; 1 -"Jide" mode
70h5 Ee -999 ÷ 1999 Uru nke "X” nchikota isi ihe mba. 1 nke njirimara akọwapụtara nke onye ọrụ, gosipụtara na 0.1%
71h5 Ee -999 ÷ 9999 Uru nke "Y” nchikota isi ihe mba. 1 nke njirimara-akọwapụtara onye ọrụ, enweghị ntụpọ ntụpọ gụnyere
72h5 ÷ 95h5 Abụọ ụzọ abụọ ọzọ"X"-"Y” na-achịkọta isi ihe mba. 2 ÷ 19 nke njirimara-akọwapụtara onye ọrụ

Mmemme Modbus RS485

Debanye aha Dee Oke Deba aha nkọwa
96h5 Ee -999 ÷ 1999 Uru nke "X” nchikota isi ihe mba. 20 nke njirimara akọwapụtara nke onye ọrụ, nke egosipụtara na 0.1%
97h5 Ee -999 ÷ 9999 Uru nke "Y” nchikota isi ihe mba. 20 nke njirimara-akọwapụtara onye ọrụ, enweghị ntụpọ ntụpọ gụnyere
A0h1 Ee 0 ÷ 3 “Omod"parameter na"OUTP” menu (ụdị mmepụta ugbu a na-arụ ọrụ)

0 – arụrụ arụ ọrụ ugbu a; 1 - ejiri mee mmepụta ihe ugbu a 4÷20mA

ọnọdụ; 2 - ejiri mee mmepụta ihe ugbu a 0÷20mA ọnọdụ;

3 - mmepụta ugbu a na-achịkwa site na interface RS-485
Ee 0 ÷ 2 “Omod"parameter na"OUTP"Menu (ụdị mmepụta ugbu a na-agafe agafe) 0 – arụrụ arụ ọrụ ugbu a; 1 - ejiri mee mmepụta ihe ugbu a 4÷20mA ọnọdụ; 2 - mmepụta ugbu a na-achịkwa site na interface RS-485
Ee 0 ÷ 5 “Omod"parameter na"OUTP” menu (arụ ọrụ voltage mmepụta mode) 0 - voltage mmepụta nwere nkwarụ; 1 - voltage mmepụta nyeere ya 0÷5V ọnọdụ; 2 - voltage mmepụta nyeere ya 1÷5V ọnọdụ; 3 - voltage mmepụta nyeere ya 0÷10V ọnọdụ; 4 - voltage mmepụta nyeere ya 2÷10V ọnọdụ; 5 - voltage mmepụta na-achịkwa site na interface RS-485
A1h1 Ee -999 ÷ 9999 “OUTL"parameter na"OUTP” menu, enweghị ntụpọ ngụkọ gụnyere
A2h1 Ee -999 ÷ 9999 “OZI"parameter na"OUTP” menu, enweghị ntụpọ ngụkọ gụnyere
A3h1 Ee 0 ÷ 999 “Lo r"parameter na"OUTP” menu, maka mmepụta dị ugbu a na arụ ọrụ voltage mmepụta, gosipụtara na 0.1%
Ee 0 ÷ 299 “Lo r"parameter na"OUTP"Menu maka mmepụta ugbu a na-agafe agafe, gosipụtara na 0.1%
A4h1 Ee 0 ÷ 199 “Ndewo r"parameter na"OUTP"Menu maka mmepụta ugbu a na-arụ ọrụ na nke na-agafe agafe, gosipụtara na 0.1%
Ee 0 ÷ 99 “Ndewo r"parameter na"OUTP” menu maka arụ ọrụ voltage mmepụta, gosipụtara na 0.1%
A5h1 Ee 0 ÷ 3 “AL"parameter na"OUTP” menu (uru mmepụta dị ugbu a na ewepu oke egwu): 0 - enweghị mgbanwe; 1 - 22.1 mA; 2 - 3.4 mA; 3 - 0mA
Ee 0 ÷ 2 “AL"parameter na"OUTP” menu (uru mmepụta ihe na-agafe agafe na ewepu oke egwu): 0 - enweghị mgbanwe; 1 - 22.1 mA; 2 - 3.4mA
Ee 0 ÷ 5 “AL"parameter na"OUTP” menu (arụ ọrụ voltage mmepụta uru na oké egwu wepụrụ): 0 - enweghị mgbanwe; 1 - 11 V; 2 - 5.5; 3 - 1.2 V; 4 - 0.6 V; 5 -0V
  1. Ndekọ ndị a na-arụ ọrụ naanị ma ọ bụrụ na ejiri ngwaọrụ ugbu a ma ọ bụ voltage mmepụta
  2. mgbe ị debanyere aha ọ dịghị 20h ngwaọrụ na-aza na adreesị "ochie" na ozi.
  3. mgbe ị debanyere aha ọ dịghị 22h ngwaọrụ na-aza na ọhụrụ baud ọnụego.
  4. A na-ejikọta uru nke paramita "mbAc" iji dee na ndekọ a, ya mere, ọ ga-ekwe omume igbochi ndị na-ede akwụkwọ, ma ọ gaghị ekwe omume ịkpọghee ederede site na interface RS-485, Mwepụ nke ederede ga-ekwe omume site na ọkwa menu naanị.
  5. Enwere ike ịkọwa ụzọ abụọ nke nhazi "X -Y" maka ebe ọ bụla efu. Ụzọ abụọ ahụ bụ "free" (ọ pụtara na akọwaghị otu isi ihe) ma ọ bụrụ na nhazi "X" nke ebe a hà nhata 8000h. Mgbe edechara ma nhazi X na Y a na-akọwapụta ma jiri ya mee ihe na ngụkọ nke nsonaazụ ya. Enwere ike ịgbanwe nhazi nke isi ihe ọ bụla n'oge ọ bụla.

Nkowa njehie mbufe

  • Ọ bụrụ na njehie emee mgbe ị na-ede ma ọ bụ na-agụ otu ndebanye aha, ngwaọrụ ahụ na-eziga koodu njehie dịka nkọwapụta Modbus RTU si dị (dịka ọmụmaatụ.ample ozi no 1).

Koodu mperi:

  • 01h - ọrụ iwu na-akwadoghị (naanị ọrụ 03h, 06h na 10h dị),
  • 02h – adreesị ndebanye aha na-akwadoghị
  • 03h - uru data iwu na-akwadoghị
  • 08h - enweghị ikike ide (lee: “mbAc” paramita)
  • A0h - gafere oke oke nke oke ntinye
  • 60h - gafere oke ala nke oke ntinye
  • A0h na koodu 60h nwere ike ịpụta naanị n'oge reg. 01h na-agụ site na ọrụ 03h (gụọ otu ndekọ).

EXAMPNKE AJỤJỤ/ỤKWU Azịza

  • Examples apply maka ngwaọrụ nwere adreesị 1. Ụkpụrụ niile na-anọchi anya hexadecimal.

Nkọwa mpaghara:

  • ADDR Adreesị ngwaọrụ na netwọk Modbus
  • ỌUNụ Koodu ọrụ
  • REG H, L Adreesị mmalite (adreesị nke ndebanye aha mbụ iji gụọ/dee, Hi na Lo byte)
  • Ọgụgụ H, L Nọmba nke ndekọ iji gụọ/dee (Hi na Lo byte)
  • BYTE C Ọnụọgụ byte data na etiti azịza
  • DATA H, L byte data (Hi na Lo byte)
  • CRC L, H Lelee njehie CRC (Hi na Lo byte)

Gụọ banyere uru egosiri (atụ), adreesị ngwaọrụ SRP-N118 = 01h:

ADDR ỌUNụ REG H, L Ọgụgụ H, L CRC L, H
01 03 00 01 00 01 D5 CA

a) Azịza ya (anyị na-eche na nsonaazụ atụpụtara anọghị nso)

ADDR ỌUNụ BYTE C DATA H, L CRC L, H
01 03 02 00 F F8 04
  • DATA HL – uru egosiri = 255, enweghị ntụpọ iri.
  • Enwere ike ịgụ ọnọdụ ntụpọ ntụpọ site na reg. 03h

b) Azịza ya (ọ bụrụ na njehie emee).

ADDR ỌUNụ ERROR CRC L, H
01 83 60 41 18

ERROR – koodu njehie = 60h, agafeela oke ala nke oke nha

Gụọ koodu njirimara ngwaọrụ

ADDR ỌUNụ REG H, L Ọgụgụ H, L CRC L, H
01 03 00 21 00 01 D4 00

Azịza ya:

ADDR ỌUNụ BYTE C DATA H, L CRC L, H
01 03 02 21 F0 A0 50

DATA - koodu njirimara (21F0h)

Mgbanwe nke adreesị ngwaọrụ site na 1 ruo 2 (dee na reg. 20h)

ADDR ỌUNụ REG H, L DATA H, L CRC L, H
01 06 00 20 00 02 09 C1
  • DATA H- 0
  • DATA L – adreesị ngwaọrụ ọhụrụ (2)

Azịza ya (otu ihe ahụ dị ka ozi):

ADDR ỌUNụ REG H, L DATA H, L CRC L, H
01 06 00 20 00 02 09 C1

Mgbanwe nke ọnụego baud nke ngwaọrụ niile ejikọrọ na netwọk (ozi BROADCAST).

ADDR ỌUNụ REG H, L Ọgụgụ H, L CRC L, H
00 06 00 22 00 04 29 D2
  • DATA H- 0
  • DATA L - 4, ọnụọgụ baud ọhụrụ 19200 baud
  • Ngwaọrụ anaghị aza ụdị ozi BROADCAST.

Gụọ ndekọ 1, 2, na 3 n'otu ozi (dịkaampnke ịgụ ọtụtụ ndekọ n'otu etiti):

ADDR ỌUNụ REG H, L Ọgụgụ H, L CRC L, H
01 03 00 01 00 03 54 0B

COUNT L - ọnụ ọgụgụ nke ịgụ akwụkwọ ndekọ (max.16)

Azịza ya:

ADDR ỌUNụ BYTE C DATA H1, L1 DATA H2, L2 DATA H3, L3 CRC L, H
01 03 06 00 0A 00 00 00 01 78 B4
  • DATA H1, L1 - usoro. 01h (10 - uru egosiri "1.0"),
  • DATA H2, L2 - usoro. 02h (0 - enweghị njehie),
  • DATA H3, L3 - usoro. 03h (1 - ọnọdụ ntụpọ ntụpọ "0.0").
  • Enweghị mmejuputa usoro Modbus zuru oke na ngwaọrụ ahụ. Ọrụ ndị a gosipụtara n'elu dị naanị.

Ndekọ ntọala nke ndị ọrụ adịghị mma

Oke Nkọwa Ọdabara uru Uru onye ọrụ Dec. ibe
Oke nke ọrụ ịgbagharị R1 (nchịkọta “rEL1”)
SEtP Ọnụ ụzọ mgbagharị R1 20.0   29
SEt2 Ọsọ ọsọ nke abụọ R1 40.0   29
HYSt Hysteresis nke relay R1 0.0   29
modE Ụdị ọrụ nke relay R1 on   29
t na Gbanwuo igbu oge nke relay R1 0.0   30
toFF Gbanyụọ igbu oge nke relay R1 0.0   30
otu Nkeji nke "t na", na "toFF" parameters nke ọsọ agba anọ R1 SEC   30
AL Mmeghachi omume na ọnọdụ dị oke egwu nke relay R1 gbanyụọ   30
Oke nke ọrụ ịgbagharị R2 (nchịkọta “rEL2”)
SEtP Ọnụ ụzọ mgbagharị R2 40.0   29
SEt2 Ọsọ ọsọ nke abụọ R2 60.0   29
HYSt Hysteresis nke relay R2 0.0   29
modE Ụdị ọrụ nke relay R2 on   29
t na Gbanwuo igbu oge nke relay R2 0.0   30
toFF Gbanyụọ igbu oge nke relay R2 0.0   30
otu Nkeji nke "t na", na "toFF" parameters nke ọsọ agba anọ R2 SEC   30
AL Mmeghachi omume na ọnọdụ dị oke egwu nke relay R2 gbanyụọ   30
Nhazi ntinye nha (nchịkọta “ntinye”)
ụdị Ụdị ntinye 4-20   31
CHAR Ụdị njirimara ntụgharị Lin   31
FiLt Ogo nzacha 0   31
Pnt Ọkwa ntụpọ iri 0.0   31
Lo C Uru egosipụtara kacha nta (maka oke ọnụ) 000.0   32
Ndewo C Uru egosipụtara kacha (maka oke ọnụ) 100.0   32
t h1 Ogologo (ogologo) akụkụ mbụ nke tank 00.00   32
t h2 Ogologo (ogologo) akụkụ nke abụọ nke tank 00.00   32
t h3 Ogologo (ogologo) akụkụ atọ nke tank 00.00   32
td Dayameta nke tank 00.01   32
t Sn Anya n'etiti ihe mmetụta na ala nke tank 00.00   32
t Sh Elu nke ihe mmetụta 20.00   32
Lo r Mgbatị nke ala nke oke ntinye aha 5.0 (%)   35
Oke Nkọwa Ọdabara uru Uru onye ọrụ Dec. ibe
Ndewo r Mgbatị elu nke oke ntinye aha 5.0 (%)   35
Nhazi mmepụta ugbu a (nchịkọta “OUtP”)
Omod Ọnọdụ mmepụta ugbu a 4-20 (mA)   37
OUTL Ngosipụta uru maka mmepụta 4 mA dị ugbu a 0.0   37
OZI Ngosipụta uru maka mmepụta 20 mA dị ugbu a 100.0   37
Lo r Mgbatị nke ala nke oke mmepụta aha 5.0 (%)   38
Ndewo r Mgbatị elu nke oke mmepụta aha 5.0 (%)   38
AL Uru mmepụta dị ugbu a na mwepu dị oke egwu 22.1 (mA)   38
Ngosipụta oke
bri Gosipụta nchapụta bri6   38
Nhazi nke ọrụ ịchọpụta ọnụ ọgụgụ kacha elu (nchịkọta “jide”)
modE Ụdị mgbanwe achọpụtara ụkpụrụ   39
PEA Mgbanwe kacha nta achọpụtara 0.0   39
Oge Oge ngosi kacha elu 0.0   39
HDS Ụdị uru egosiri Jide   39
H r1 Isi iyi nke ọsọ agba anọ R1, na LED R1 akara REAL   39
H r2 Isi iyi nke ọsọ agba anọ R2, na LED R2 akara REAL   39
Kwuonụ Isi mmalite njikwa mmepụta ugbu a REAL   39
Ntọala nke ịnweta paramita nhazi (menu "SECu")
nke r1 Ikike maka mgbanwe nke ọnụ ụzọ relay R1 na-enweghị ịma paswọọdụ onye ọrụ on   39
nke r2 Ikike maka mgbanwe nke ọnụ ụzọ relay R2 na-enweghị ịma paswọọdụ onye ọrụ on   39
Nhazi interface RS 485 (nchịkọta "rS")
Adreesị Adreesị ngwaọrụ 0   40
bAud Ọnụ ego baud 9.6   40
MBA Ikike mgbanwe nke ndekọ aha nhazi on   40
MB ka Ogologo oge n'etiti ozi enwetara 0   40
rESP Mgbakwunye ọgbaghara nke nnyefe azịza Std   40
Nhazi nke mbipụta parampat ọnụọgụ
Dezie Ụdị ndezi parampat ọnụọgụgụ igwu   41

24-0222 © Icon Process Controls Ltd.

Akwụkwọ / akụrụngwa

Usoro ICON jikwaa TVL Series Tank ọkwa ọkwa na njikwa [pdf] Akwụkwọ ntuziaka onye nwe
Ngosipụta ọkwa ọkwa nke TVL na njikwa, usoro TVL, Ngosipụta ọkwa tank na njikwa, Ngosipụta na njikwa, njikwa

Ntụaka

Ozi ndị metụtara

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *