S08AO2-E PLC Analog Module

Akwụkwọ ntuziaka Haiwell PLC
Omuma Mmemme Logic Controller
Akwụkwọ ntuziaka onye ọrụ Modul Analog & Okwu Ngwa

Ụlọ ọrụ Xiamen Haiwell Technology Co., Ltd

www.haiwell.com
Haiwell PLC – Akwụkwọ ntuziaka onye ọrụ Module Analog & Okwu ngwa

Akwụkwọ ntuziaka onye ọrụ Analog Module

1. Ndepụta Nlereanya Ngwaahịa na akụkụ
Ihe nlereanya Ethernet 24VDC Ethernet Model 220VAC

Ihe nlereanya Ethernet	24VDC	Ihe nlereanya Ethernet	220VAC	Nlereanya	24VDC	Nlereanya	220VAC	Akụkụ
				S04AI	0.07A	S04AI2	7W	70×95×82mm
				S04AO	0.15A	S04AO2	8.8W
				S04XA	0.1A	S04XA2	7.8W
S08AI-e	0.11A	S08AI2-e	7.9W	S08AI	0.08A	S08AI2	7.3W	93×95×82mm
S08AO-e	0.25A	S08AO2-e	12.4W	S08AO	0.22A	S08AO2	11.8W
S08XA-e	0.18A	S08XA2-e	10.4W	S08XA	0.15A	S08XA2	9.8W

1. Oghere edobere
2. Mkpọsa ọnụ ọnụ nke mbughari
3. Nkọwa njedebe
4. ọdụ ụgbọ mmiri ịgbasa modul
5. DIP switch4-channel modul enweghị DIP mgba ọkụ
6. Ọnụ ọkụ ọkụ mpụga (DC24V na AC220V, nke PLC na-akwadokarị)
7. Ntugharị ụgbọ okporo ígwè
8. Ọdụ ụgbọ ala mbughari
9. Ihe ngosi ntinye ọwa analog
10. ọdụ ụgbọ mmiri RS485
11. PWR ike egosi, LINK modul nkwurịta okwu
12. ọdụ ụgbọ mmiri ịgbasa modul
13. Mkpuchi oghere nke ọdụ modul
14. Mpempe aha modulu
15. 35mm DIN ndu okporo ígwè

2. Nkọwa ihe ngosi

1. PWR: egosi ike. akwụkwọ ndụ akwụkwọ ndụ, ìhè mgbe niile -Ike nkịtị; Ọ bụghị ọkụ - Ike adịghị mma.
2. Njikọ: ihe ngosi ọtụtụ ọnọdụ. agba atọ (Red. Yellow. Green), dị ka ndị a:

Ụdị nhazi ntụaka	Ọnọdụ ụgbọ ala modul	Njikọ njikọ steeti
Nkịtị	Enweghị nkwukọrịta modul	Enweghị ọkụ
	MPU achọpụtala modul mana mba nzikọrịta ozi	Ọkụ na-adịgide adịgide na akwụkwọ ndụ akwụkwọ ndụ
	Oghere Usoro ma ọ bụ ihe yiri ọdụ ụgbọ mmiri na nkwukọrịta	Green jitter: egosi na 30ms na gbanyụọ 30ms
Mkpokọta ike ọkọnọ abụghị ezuru, ga-ejikọrịrị na mpụga ịnye ọkụ	Na-enweghị serial ma ọ bụ parallel port in nzikọrịta ozi	Edo flicker: egosi na 0.5s na gbanyụọ 0.5s
	Na Oghere Usoro ma ọ bụ yitere ọdụ ụgbọ mmiri na nkwukọrịta	Yellow na-agba ọchịchịrị ma na-agbaji ọzọ: egosi gbanyụọ 0.5s na agba 0.5s
Nkwalite firmware dara, megharịa modul firmware	Na-enweghị serial ma ọ bụ parallel port in nzikọrịta ozi	Red flicker: egosi na 0.5s na gbanyụọ 0.5s
	Na Oghere Usoro ma ọ bụ yitere ọdụ ụgbọ mmiri na nkwukọrịta	Uhie na-agba ọchịchịrị ma na-agbaji ọzọ: egosi gbanyụọ 0.5s na agba 0.5s
Akụrụngwa ọdịda na mmezi	Na-enweghị serial ma ọ bụ parallel port in nzikọrịta ozi	Ọkụ na-adị na-acha uhie uhie
	Na Oghere Usoro ma ọ bụ yitere ọdụ ụgbọ mmiri na nkwukọrịta	Red jitter ọsọ ọsọ: egosi na 30ms na gbanyụọ 30ms

3 RJ45 Ethernet egosi: enwere LED Ethernet abụọ, akwụkwọ ndụ akwụkwọ ndụ na odo, dị ka egosiri na foto a:

Agba
Ìhè akwụkwọ ndụ akwụkwọ ndụ dị ogologo na-egbuke egbuke Green na-apụ apụ
Ìhè edo edo na-egbuke egbuke
Ìhè edo edo na-apụ apụ

Nkọwa ọnọdụ
Njikọ anụ ahụ nke modul TCP na ngwaọrụ mpụga bụ ihe nkịtị;
TCP modul ada ijikọ na mpụga ngwaọrụ ma ọ bụ modul n'onwe ya bụ ihe na-adịghị mma TCP modul ejikọrọ na mpụga ngwaọrụ nkịtị, na blinking ugboro na-egosi na data nnyefe ọsọ. Mgbe ọsọ na-agba ọsọ, anya mmadụ adịghị mfe ịmata, n'oge a, ìhè edo edo na-egbuke egbuke. Enweghị nkwukọrịta nnyefe data nke modul TCP na ngwaọrụ mpụga

3. Nkọwapụta Ike

Ihe na-enye ike voltage Ugboro ọkọnọ ọkụ ngwa ngwa mwepu ike oge ọnwụ Fuse 24V mmepụta voltage (maka ntinye na mgbasawanye)
Ụdị iche
Nchekwa ike

Nbunye ike DC 24VDC -15%~+20% —- MAX 20A 1.5ms @24VDC 10ms ma ọ bụ obere 0.3A, 250V Ọ dịghị onye
Enweghị ikewapụ ọkụ eletrik
Ntinye ike polarity DC, n'elu voltage nchebe

Ike Ike AC 100 ~ 240VAC 50 ~ 60Hz 20A 1.5ms MAX @220VAC 20ms ma ọ bụ obere @220VAC 2A, 250V 24V, -15% ~+15%, 200mA (Max) Transformer ikewapụ ma ọ bụ optoelectronic nkeji 1500.
DC 24V mmepụta karịrị nchebe ugbu a

4. Nkọwapụta gburugburu ebe obibi maka ngwaahịa

Ihe Okpomọkụ/Iru mmiri Na-eguzogide Mgbochi Mgbochi Mgbochi Mgbochi Mgbochi n'ofe Vol.tage Mgbochi Mgbochi Mgbochi na-arụ ọrụ gburugburu

Nkọwa gburugburu ebe obibi na-arụ ọrụ okpomọkụ: 0 ~ + 55 Nchekwa okpomọkụ: -25 ~ + 70 iru mmiri: 5 ~ 95% RH, Ọ dịghị condensation 10 ~ 57 HZ, amplitude = 0.075mm, 57HZ ~ 150HZ acceleration = 1G, 10 ugboro ọ bụla maka X-axis, Y-axis na Z-axis 15G, oge = 11ms, 6 ugboro ọ bụla maka X-axis, Y-axis na Z-axis DC EFT : ± 2500V Surge: ± 1000V 1500VAC / 1min n'etiti AC ọnụ na PE ọnụ, 500VAC / 1min n'etiti DC ọnụ na PE ọnụ N'etiti AC ọnụ na PE ọnụ @500VDC,>= ​​5M, ihe niile ntinye / mmepụta na-atụ aka na 500DC. uzuzu, mmiri mmiri, corrosion, ọkụ eletrik na mpụ dị n'èzí

5. Ntinye Analog (AI) Nkọwapụta

Mkpebi ntinye ihe nsonye nsonye
Oke ntinye aka kacha
Ngosipụta ntinye aka Oge nzaghachi nso nsonye dijitalụ nkenke Nrụpụta ike ikewapụ ọnọdụ oriri ike

Voltagntinye

Ntinye ugbu a

0V~+10V

0V~+5V

1V~+5V

0 ~ 20mA 4 ~ 20mA

2.5mV

1.25mV

1.25mV

5A

6M

250

± 13V

± 30mA

Ọkụ LED ON pụtara nkịtị, gbanyụọ pụtara nkwụsị mpụga

5ms/4 ọwa

12 ibe n'ibe, Koodu nso: 0 ~ 32000 (H usoro modul 16 ibe n'ibe A / D tọghatara)

0.2% FS

MPU na-eji ike ọkọnọ n'ime, gbatịa modul jiri ike ọkọnọ mpụga 24VDC ± 10% 5VA

Optoelectronic mwepu, enweghị ikewapụ n'etiti ọwa, n'etiti analọg na dijitalụ bụ optoelectronic mwepu.

24VDC ± 20%,100mA (kacha)

6. Analog mmepụta (AQ) Nkọwapụta

Oke mmepụta ihe Mkpebi Mbupụta ibu impedance mmepụta ihe ngosi ikike mbanye oge nzaghachi oge mmepụta dijitalụ oke nkenke ọkọnọ ike ikewapụ ọnọdụ oriri ike.

Ihe	Voltage mmepụta			Mbupute ugbu a
Ihe mmeputa	0V~ +10V	0V~+5V	1V~+5V	0-20mA	4-20mA
Mkpebi	2.5mV	1.25mV	1.25mV	5 uA	5 uA
Mmepụta ibu ihe mgbochi	1KΩ@10V	≥500Ω@10V		≤500Ω
Ngosipụta mmepụta	Ikanam ON pụtara nkịtị
Ike ịkwọ ụgbọala	10mA
Oge nzaghachi	3ms
Oke mmepụta dijitalụ	12 ibe n'ibe, Koodu nso: 0 ~ 32000 (H usoro modul 16 ibe n'ibe D / A tọghatara)
Nkenkenke	0.2% FS
Ịnye ọkụ	MPU na-eji ike ọkọnọ n'ime, modul mgbasawanye na-eji ike mpụga 24VDC ± 10% 5VA
Ụdị iche	Optoelectronic mwepu, Enweghị ikewapụ n'etiti ọwa, n'etiti analọg na dijitalụ bụ optoelectronic mwepu.
Oriri ike	24VDC ± 20%,100mA (kacha)

7. Ihe nbanye Analog (AI) eserese

8. Ihe ngosi Analog (AQ) Wiring Eserese

9. MPU Terminal Wiring Eserese

10. Modul Parameter Tebụl

(koodu CR dabara na adreesị ndekọ Modbus)

4-channel analog module parameter table Mara: CR code kwekọrọ na adreesị ndekọ Modbus, akụkụ ray na-agụ naanị, akụkụ ọcha na-agụ ma dee ya.

CR	koodu Nkọwa ọrụ
	S04AI	S04AO	S04XA
00H	Obere byte maka koodu modul, yana nnukwu byte maka nọmba ụdị modul.
01H	Adreesị nzikọrịta ozi
02H	Usoro nzikọrịta ozi: 4-bit dị ala nke obere byte: 0 – N,8,2 Maka RTU, 1 – E,8,1 Maka RTU, 2 – O,8,1 Maka RTU, 3 – N,7,2 Maka ASCII, 4-E,7,1 Maka ASCII, 5 - O,7,1 Maka ASCII, 6 - N,8, 1 Maka RTU 4-bit dị elu nke obere byte: 0 - 2400, 1 - 4800, 2 - 9600, 3 - 19200, 4 - 38400, 5 - 57600, 6 - 115200
03H ~ 06H	Aha modul
07H ~ 08H	adreesị IP ndabara: 192.168.1.111
09-0AH	Ndokwa
0 BH	Ihe mkpuchi subnet byte dị elu (b3 ~ b0,1 na-egosi 255, 0 na-egosi 0, maka ex.ample subnet nkpuchi 255.255.255.0, b3 ~ b0=1110), lowbyte
0CH-0EH	Ndokwa
0FH	Koodu mperi: 0-Nkịtị, 1-Ilegal firmware njirimara, 2-Ezughi ezu firmware, 3-System data ohere wepụrụ, 4-Ọ dịghị mpụga 24Vpowersupply.
10H	uru ntinye ọwa 1	ọwa 1 uru mmepụta	ntinye ọwa 1 uru ntinye
11H	uru ntinye ọwa 2	ọwa 2 uru mmepụta	ntinye ọwa 2 uru ntinye
12H	uru ntinye ọwa 3	ọwa 3 uru mmepụta	ntinye ọwa 1 ụdị mgbama, ndetu 2
13H	uru ntinye ọwa 4	ọwa 4 uru mmepụta	ntinye ọwa 2 ụdị mgbama, ndetu 2
14H	Ụdị akara ọwa 1, ndetu 2	Ụdị akara ọwa 1, ndetu 2	Jiri akara uru injinia, ndetu 6
15H	Ụdị akara ọwa 2, ndetu 2	Ụdị akara ọwa 2, ndetu 2	ntinye ọwa 1 injinia obere oke oke
16H	Ụdị akara ọwa 3, ndetu 2	Ụdị akara ọwa 3, ndetu 2	ntinye ọwa 2 injinia obere oke oke
17H	Ụdị akara ọwa 4, ndetu 2	Ụdị akara ọwa 4, ndetu 2	ntinye ọwa 1 injinia oke oke oke
18H	Jiri akara uru injinia, rịba ama	6 Jiri akara uru injinia, rịba ama	6 ntinye ọwa 2 injinia oke oke oke
19H	ọwa 1 injinia obere oke oke	ọwa 1 injinia obere oke oke	ntinye ọwa 1 sampugboro ugboro, ndetu1
1 AH	ọwa 2 injinia obere oke oke	ọwa 2 injinia obere oke oke	ntinye ọwa 2 sampugboro ugboro, ndetu1
1 BH	ọwa 3 injinia obere oke oke	ọwa 3 injinia obere oke oke	ntinye ọwa 1 uru mgbazi efu
1CH	ọwa 4 injinia obere oke oke	ọwa 4 injinia obere oke oke	ntinye ọwa 2 uru mgbazi efu
1DH	ọwa 1 injinia oke oke oke	ọwa 1 injinia oke oke oke	Ọwa 1~2 ntinye mkpu nkwụsị njikọ, note5
1EH	ọwa 2 injinia oke oke oke	ọwa 2 injinia oke oke oke	ọwa mmepụta 1 uru mmepụta
1FH	ọwa 3 injinia oke oke oke	ọwa 3 injinia oke oke oke	ọwa mmepụta 2 uru mmepụta
20H	ọwa 4 injinia oke oke oke	ọwa 4 injinia oke oke oke	Ọwa mmepụta 1 ụdị mgbama, ndetu 2
21H	ọwa 1 sampugboro ugboro, ndetu	1 akara mmepụta ike gbanyụọ, ndetu 8	Ọwa mmepụta 2 ụdị mgbama, ndetu 2
22H	ọwa 2 sampugboro ugboro, ndetu	1 ọwa 1 uru mmepụta ọkụ	Jiri akara uru injinia, ndetu 6
23H	ọwa 3 sampugboro ugboro, ndetu	1 ọwa 2 uru mmepụta ọkụ	mmepụta ọwa 1 engineering ala amachi uru
24H	Ọwa 4 sampugboro ugboro, ndetu	1 ọwa 3 uru mmepụta ọkụ	mmepụta ọwa 2 engineering ala amachi uru
25H	ọwa 1 mmezi ntụpọ efu	uru ọwa 4 ike-apụ mmepụta uru	mmepụta ọwa 1 engineering elu limiting value
26H	ọwa 2 mmezi ntụpọ efu	uru ọwa egosi ọkwa, ndetu	7 mmepụta ọwa 2 engineering top limiting value
27H	ọwa 3 mmezi ntụpọ efu	uru Reserve	akara mmepụta ike gbanyụọ, ndetu 8
28H	ọwa 4 mmezi ntụpọ efu	uru	ọwa mmepụta 1 uru mmepụta ike
29H	Ọwa 1~4 ntinye nkwụsịtụ mkpu, ndetu 5		ọwa mmepụta 2 uru mmepụta ike
2 AH	Ndokwa		Ngosipụta ọwa mmepụta, ndetu 7
2BH ~ 2FH			Ndokwa

8-channel analog modul table paramita

Mara: Koodu CR dabara na adreesị ndebanye aha Modbus, akụkụ isi awọ ka a na-agụ naanị, akụkụ ọcha ka enwere ike ịgụ ma dee ya.  

CR	koodu Nkọwa ọrụ
	S08AI	S08AO	S08XA
00H	Obere byte maka koodu modul, yana nnukwu byte maka nọmba ụdị modul.
01H	Adreesị nzikọrịta ozi
02H	Usoro nzikọrịta ozi: 4-bit dị ala nke obere byte: 0 – N,8,2 Maka RTU, 1 – E,8,1 Maka RTU, 2 – O,8,1 Maka RTU, 3 – N,7,2 Maka ASCII, 4-E,7,1 Maka ASCII, 5 - O,7,1 Maka ASCII, 6 - N,8, 1 Maka RTU 4-bit dị elu nke obere bytes: 0 - 2400, 1 - 4800, 2 - 9600, 3 - 19200, 4 - 38400, 5 - 57600, 6 - 115200
03H ~ 06H	Aha modul
07H ~ 08H	adreesị IP ndabara: 192.168.1.111
09-0AH	Ndokwa
0 BH	Nkpuchi subnet byte dị elu (b3 ~ b0,1 na-egosi 255,0 na-egosi 0, maka ex.ample, ihe nkpuchi subnet 255.255.255.0, b3 ~ b0=1110), lowbyte
0CH ~ 0EH	Ndokwa
0FH	Koodu mperi: 0-Nkịtị, 1- njirimara firmware na-ezighi ezi, 2- firmware na-ezughị ezu, ewepu ohere ịnweta data sistemụ 3, 4-Enweghị ikike 24V mpụga.
10H	uru ntinye ọwa 1	ọwa 1 uru mmepụta	ntinye ọwa 1 uru ntinye

Echekwara

 6/18

www.haiwell.com Haiwell PLC – Akwụkwọ ntuziaka onye ọrụ Module Analog

CR	koodu Nkọwa ọrụ
	S08AI	S08AO	S08XA
11H	uru ntinye ọwa 2	ọwa 2 uru mmepụta	ntinye ọwa 2 uru ntinye
12H	uru ntinye ọwa 3	ọwa 3 uru mmepụta	ntinye ọwa 3 uru ntinye
13H	uru ntinye ọwa 4	ọwa 4 uru mmepụta	ntinye ọwa 4 uru ntinye
14H	uru ntinye ọwa 5	ọwa 5 uru mmepụta	ntinye ọwa 1 ụdị mgbama, ndetu 2
15H	uru ntinye ọwa 6	ọwa 6 uru mmepụta	ntinye ọwa 2 ụdị mgbama, ndetu 2
16H	uru ntinye ọwa 7	ọwa 7 uru mmepụta	ntinye ọwa 3 ụdị mgbama, ndetu 2
17H	uru ntinye ọwa 8	ọwa 8 uru mmepụta	ntinye ọwa 4 ụdị mgbama, ndetu 2
18H	Ụdị akara ọwa 1, ndetu 2	Ụdị akara ọwa 1, ndetu 2	Jiri akara uru injinia, ndetu 6
19H	Ụdị akara ọwa 2, ndetu 2	Ụdị akara ọwa 2, ndetu 2	ntinye ọwa 1 engineering obere mmachi uru
1 AH	Ụdị akara ọwa 3, ndetu 2	Ụdị akara ọwa 3, ndetu 2	ntinye ọwa 2 engineering obere mmachi uru
1 BH	Ụdị akara ọwa 4, ndetu 2	Ụdị akara ọwa 4, ndetu 2	ntinye ọwa 3 engineering obere mmachi uru
1CH	Ụdị akara ọwa 5, ndetu 2	Ụdị akara ọwa 5, ndetu 2	ntinye ọwa 4 engineering obere mmachi uru
1DH	Ụdị akara ọwa 6, ndetu 2	Ụdị akara ọwa 6, ndetu 2	ntinye ọwa 1 engineering elu mmachi uru
1EH	Ụdị akara ọwa 7, ndetu 2	Ụdị akara ọwa 7, ndetu 2	ntinye ọwa 2 engineering elu mmachi uru
1FH	Ụdị akara ọwa 8, ndetu 2	Ụdị akara ọwa 8, ndetu 2	ntinye ọwa 3 engineering elu mmachi uru
20H	Jiri akara uru injinia, rịba ama	6 Jiri akara uru injinia, rịba ama	6 ntinye ọwa 4 engineering elu mmachi uru
21H	ọwa 1 engineering ala mmachi uru	ọwa 1 engineering ala mmachi uru	ntinye ọwa 1 sampugboro ugboro, ndetu1
22H	ọwa 2 engineering ala mmachi uru	ọwa 2 engineering ala mmachi uru	ntinye ọwa 2 sampugboro ugboro, ndetu1
23H	ọwa 3 engineering ala mmachi uru	ọwa 3 engineering ala mmachi uru	ntinye ọwa 3 sampugboro ugboro, ndetu1
24H	ọwa 4 engineering ala mmachi uru	ọwa 4 engineering ala mmachi uru	ntinye ọwa 4 sampugboro ugboro, ndetu1
25H	ọwa 5 engineering ala mmachi uru	ọwa 5 engineering ala mmachi uru	ntinye ọwa 1 uru mgbazi efu
26H	ọwa 6 engineering ala mmachi uru	ọwa 6 engineering ala mmachi uru	ntinye ọwa 2 uru mgbazi efu
27H	ọwa 7 engineering ala mmachi uru	ọwa 7 engineering ala mmachi uru	ntinye ọwa 3 uru mgbazi efu
28H	ọwa 8 engineering ala mmachi uru	ọwa 8 engineering ala mmachi uru	ntinye ọwa 4 uru mgbazi efu
29H	ọwa 1 engineering elu mmachi uru	ọwa 1 engineering elu mmachi uru	Ọwa 1~4 ntinye mkpu nkwụsị njikọ, note5
2 AH	ọwa 2 engineering elu mmachi uru	ọwa 2 engineering elu mmachi uru	ọwa mmepụta 1 uru mmepụta
2 BH	ọwa 3 engineering elu mmachi uru	ọwa 3 engineering elu mmachi uru	ọwa mmepụta 2 uru mmepụta
2CH	ọwa 4 engineering elu mmachi uru	ọwa 4 engineering elu mmachi uru	ọwa mmepụta 3 uru mmepụta
2DH	ọwa 5 engineering elu mmachi uru	ọwa 5 engineering elu mmachi uru	ọwa mmepụta 4 uru mmepụta
2EH	ọwa 6 engineering elu mmachi uru	ọwa 6 engineering elu mmachi uru	Ọwa mmepụta 1 ụdị mgbama, ndetu 2
2FH	ọwa 7 engineering elu mmachi uru	ọwa 7 engineering elu mmachi uru	Ọwa mmepụta 2 ụdị mgbama, ndetu 2
30H	ọwa 8 engineering elu mmachi uru	ọwa 8 engineering elu mmachi uru	Ọwa mmepụta 3 ụdị mgbama, ndetu 2
31H	ọwa 1 sampugboro ugboro, ndetu	1 akara mmepụta ike gbanyụọ, ndetu 8	Ọwa mmepụta 4 ụdị mgbama, ndetu 2
32H	ọwa 2 sampugboro ugboro, ndetu	1 ọwa 1 uru mmepụta ọkụ	Jiri akara uru injinia, ndetu 6
33H	ọwa 3 sampugboro ugboro, ndetu	1 ọwa 2 uru mmepụta ọkụ	mmepụta ọwa 1 engineering ala amachi uru
34H	ọwa 4 sampugboro ugboro, ndetu	1 ọwa 3 uru mmepụta ọkụ	mmepụta ọwa 2 engineering ala amachi uru
35H	ọwa 5 sampugboro ugboro, ndetu	1 ọwa 4 uru mmepụta ọkụ	mmepụta ọwa 3 engineering ala amachi uru
36H	ọwa 6 sampugboro ugboro, ndetu	1 ọwa 5 uru mmepụta ọkụ	mmepụta ọwa 4 engineering ala amachi uru
37H	ọwa 7 sampugboro ugboro, ndetu	1 ọwa 6 uru mmepụta ọkụ	mmepụta ọwa 1 engineering elu limiting value
38H	ọwa 8 sampugboro ugboro, ndetu	1 ọwa 7 uru mmepụta ọkụ	mmepụta ọwa 2 engineering elu limiting value
39H	ọwa 1 mmezi ntụpọ efu	uru ọwa 8 ike-apụ mmepụta uru	mmepụta ọwa 3 engineering elu limiting value
3 AH	ọwa 2 mmezi ntụpọ efu	uru ọwa egosi ọkwa, ndetu	7 mmepụta ọwa 4 engineering top limiting value
3 BH	ọwa 3 mmezi ntụpọ efu	uru Reserve	akara mmepụta ike gbanyụọ, ndetu 8
3CH	ọwa 4 mmezi ntụpọ efu	uru	ọwa mmepụta 1 uru mmepụta ike
3DH	ọwa 5 mmezi ntụpọ efu	uru	ọwa mmepụta 2 uru mmepụta ike
3EH	ọwa 6 mmezi ntụpọ efu	uru	ọwa mmepụta 3 uru mmepụta ike
3FH	ọwa 7 mmezi ntụpọ efu	uru	ọwa mmepụta 4 uru mmepụta ike
40H	ọwa 8 mmezi ntụpọ efu	uru	Ngosipụta ọwa mmepụta, ndetu 7
41H	Ntinye nkwuputa nke ọwa 1 ~ 8 5	mkpu,	Ndokwa
42H ~ 4FH	Ndokwa

Mara:

1. Sampugboro ugboro: 0 - 2 ugboro, 1 - 4 ugboro, 2 - 8 ugboro, 3 - 16 ugboro, 4 - 32 ugboro, 5 - 64 ugboro, 6 - 128 ugboro, 7 - 256 ugboro 2. Ụdị mgbaàmà: 0 - [4,20] mA, 1 - [0,20] mA, 2 - [1,5]V, 3 - [0,5]V, 4 - [0,10]V

3. Mwapu mkpu: Nke ọ bụla bit na-egosi 1 ọwa, 0-nkịtị, 1-ịkwụsị

4. Jiri akara uru injinia: bit nke ọ bụla na-egosi ọwa 1, 0-Ee e, 1-Ee

5. Ọwa ngosi ọkwa: Nke ọ bụla bit na-egosi 1 ọwa, 0-apụ, 1-on

6. Akara mmepụta ike gbanyụọ: bit ọ bụla na-egosi ọwa 1, 0-Ee e, 1-Ee

11. Ịkwado na ntinye

Ekwesịrị idobe PLC n'ime kabinet emechiri emechi ka ọ na-arịgo. Maka ikpo ọkụ ọkụ, jide n'aka na ị ga-enye nkwụsị kacha nta nke 50mm n'etiti unit na akụkụ niile nke kabinet. (Lee foto a.)
Ịkwanye ụgbọ okporo ígwè: Jiri ụgbọ okporo ígwè 35 mm ọkọlọtọ.
Ịkwado Screw: MPU ọ bụla ma ọ bụ modul mgbasawanye nwere oghere ịghasa abụọ, dayameta nke oghere ahụ bụ 4.5mm. Biko rụtụ aka na ọnụ ọgụgụ nha maka ebe oghere ndị ahụ dị na oghere ha. Iji zere oke okpomọkụ yana maka mgbasa ọkụ ka mma, ebulila PLC n'ọnọdụ dị nso na ala/elu nke kabinet. Ekwutela PLC n'akụkụ kwụ ọtọ.

Wiring Module Mgbasawanye: A na-enweta njikọ n'etiti modul mgbasawanye yana njikọ dị n'etiti modul na MPU site na bọs. A ga-ahazi otu eriri mgbasawanye na modul mgbasawanye ọ bụla, maka njikọ dị n'etiti modul abụọ dị iche iche. Ụzọ njikọ: gbanwee akụkụ aka nri nke interface agbatị (MPU ikpeazụ ma ọ bụ modul mgbasawanye), gbanye eriri mgbasawanye na interface agbatị, wee pịa ya. ala mkpuchi nke agbatị interface iji tọgharịa interface ahụ, a ga-edobe oghere dị n'akụkụ aka nri nke modul ahụ maka mgbasawanye nke modul na-esote. Jikọọ modul mgbasawanye niile n'otu ụzọ ahụ.

www.haiwell.com

Haiwell PLC – Okwu ngwa Module Analog

Mpempe akwụkwọ ngwa Analog

1. Gbasawanye modul site na ọdụ ụgbọ mmiri PLC ndị ọbịa
1.1. Modul ọkọnọ ike

Modul Analog nwere ike ịbụ modul mgbasawanye maka PLC ọ bụla ọbịa; Mgbe modul ahụ kwụwara n'azụ PLC onye ọbịa site na bọs yiri ya, ọ dịghị mkpa ịnweta ike mpụga, modul na-akwado ya site na ọdụ ụgbọ mmiri PLC nke ndị ọbịa, ma ọ bụrụ na ọkọnọ nke modul ezughi oke (ihe ngosi ike PWR adịghị ọkụ) , mgbe ahụ dị ka dị iche iche ụdị, modul nwere ike kwadoro site 24VDC ma ọ bụ 220VAC. Mgbe modul na-agbatị site na ọdụ ụgbọ mmiri yiri ya, a na-atụ aro ka iji modul 24VDC. Modul ọkọnọ ike exampLe:

1 Mgbe PLC onye ọbịa nwere ike gbasaa na modul 7, ihe ngosi PWR nke frist modules ise na-egbuke egbuke ogologo oge, na-egosi modul modul na-enye ike na-emekarị, ma ọ bụrụ na PWR na-egosi 6th na 7th modules adịghị ọkụ, na-egosi enweghị ike zuru ezu. , ọ bụrụhaala na 6th na 7th modul na-ewere ike mpụga.

2 Mgbe PLC onye ọbịa na modul mgbasa 1, n'ihi na PLC onye ọbịa na-enye ike site na ọdụ ụgbọ mmiri yiri ya, ihe ngosi PWR nke mode ga-enwu; Ọ bụrụ na agbakwunyere modul ahụ ike mpụga, ọ ka nwere ike ịrụ ọrụ, oge a modul ga-ekpebi na-akpaghị aka na-ebute ụzọ maka ike mpụga.

1.2. Achọghị ka edee mmemme ntụgharị ọ bụla, gụọ uru aha ndekọ analog ozugbo.

Maka example, onye ọbịa PLC T16S2T, n'otu n'otu, ejiri modul atọ nke S04AI, S04AO na S08XA gbasaa site na ọdụ ụgbọ mmiri si n'aka ekpe gaa n'aka nri, na-eche na ọnọdụ ahụ:

• Analog modul S04AI ntinye ọwa 1, ụdị mgbaàmà bụ 4-20mA, eji tụọ nrụgide, oke nrụgide nke 0.0 ~ 3.0Mpa;
• Analog modul S04AO ntinye ọwa 1, ụdị mgbaàmà bụ 0-10V, eji achịkwa ugboro inverter nke 0.0 ~ 50.0Hz;

Buru ụzọ tinye mmanya menu mmemme PLC – view - Nhazi ngwaike, dabere na usoro mpụga nke ezigbo modulu iji gbakwunye ụdị modul, mgbe agbakwunyere, a ga-ahazi adreesị analog na-akpaghị aka, dị ka egosiri n'okpuru:

Haiwell analog modul ekwesighi ka edee mmemme ntughari ọ bụla, dịka maka nha nrụgide dị n'elu, naanị anyị kwesịrị ịlele ojiji nke uru injinia, tọọ uru dị ala nke 0 kwekọrọ na 0.0Mpa, tọọ uru oke oke nke 3000 na-egosi 3.000Mpa. , Uru oke elu 3000 zoro ezo ebe iri atọ nwere ike nweta oge nkwalite ma melite izi ezi. Mgbe ahụ, anyị na-agụ uru nke ndekọ ntinye ntinye analog AI0, ma ọ bụrụ AI0 = 1234, mgbe ahụ uru ya bụ 1.234Mpa.

N'otu aka ahụ, maka mmepụta analọg, lelee iji uru injinia, tọọ uru dị ala nke 0 na-egosi 0.0Hz, tọọ uru oke oke nke 500 na-egosi 50.0Hz, ma ọ bụrụ na ịchọrọ ka nrụpụta inverter ugboro bụ 25.6Hz, ọ bụrụhaala na ịmanye uru AQ0 dị ka 256 ma ọ bụ site na ntuziaka mgbagha ndị ọzọ iji wepụta uru AQ0 nke 256. Dị ka egosiri n'okpuru:

1.3. Nka mmemme

Ọ bụrụ na ịchọrọ ide mmemme mkpu na nrụgide karịrị uru ntọala, maka example, mgbe nrụgide ahụ karịrị 1.25Mpa, ọ ga-ama jijiji, mmemme nke PLC nwere ike dee dị ka ndị a:

1.4. Gosi uru analọgụ na SCADA, HMI

Ọ bụrụ na nhazi, ihuenyo mmetụ, ederede na ngwanrọ PC ndị ọzọ chọrọ igosi nrụgide dị ugbu a, ọ bụ naanị mkpa ịtọ ebe atọ decimal na ihe ngosi oge ochie, mgbe ahụ, uru agụ ga-ebelata na-akpaghị aka 1000 ugboro na nhazi ahụ, nke ahụ bụ n'ezie. uru okpomọkụ, maka exampYa mere, ị nwere ike ịtọ 3 n'ebe ntụpọ nke Haiwell Cloud SCADA ntọala.
Ya mere na mgbe PLC gụrụ uru AI0, AI0 = 1234, nke ahụ bụ uru nke 1.234Mpa n'ezie, ọ dịghị mkpa ịnweta nhazi data na PLC na nhazi, naanị tinye ebe 3 decimal na ihe ngosi oge ochie, mgbe ahụ, ọ ga-eme. ga-ebelata na-akpaghị aka site na 1000 ugboro, na-egosipụta uru nke 1.234, nke ahụ bụ n'ezie uru nke 1.234Mpa.

1.5. Mgbe ejighị uru injinia, uru koodu ndabara bụ 0 ~ 32000

Mgbe ị na-eji uru injinia, a na-akọwa ngbanwe ahịrị ahịrị site na oke ala na oke oke, na mmemme ahụ na-agbanwe ozugbo. Mgbe ejighị uru injinia, ụdị niile dị n'otu iji kwekọọ na uru koodu 0 ~ 32000. Otu ihe atụ nke nrụgide nrụgide, oge a nwere ike dị ka usoro ntụgharị ahịrị ahịrị si dị: Out = (In - InDw) * (OutUp- OutDw) / (InUp-InDw) + OutDw iji dee mmemme ntụgharị, ma ọ bụ jiri mgbanwe mgbanwe SC. ntuziaka iji gbakọọ ozugbo.
Analoji Haiwell na-eji ngwa ngwa, a na-atụ aro ka ịlele iji uru injinia, nke mere na analog ahụ ga-adaba adaba nke ukwuu n'edeghị mmemme ọ bụla.

1.6. Ngwa koodu CR modul example: Gụọ oti mkpu nkwụsị ọwa modul

Na nke a example, iji na-agụ mpụga ihe mmetụta disconnection ozi nke S08XA modul, a na-echekwa data mwepu nke S08XA module input ọwa 1-4 na CR29, ya bụ, 29H (hexadecimal), decimal 41. (Enwere ike ịchọta ọdịnaya CR ọzọ. na enyemaka n'ịntanetị software - akwụkwọ ntuziaka ngwaike - paramita modul mgbasawanye n'ime ụdị kwekọrọ). Mmemme a bụ nke a:
oghere: Nọmba ọnọdụ, S08XA bụ modul nke atọ, ya mere dejupụta 3; CR: Oti mkpu nkwụsị nke modul CR41, ya bụ, 29H (hexadecimal) = 41 (ngụkọta ọnụ), ọ nwere ike itinye ya ozugbo 41 ma ọ bụ 0x29 n'ime ntụziaka CR ntụziaka; N: Nọmba maka ịgụ, 1 debanye aha maka 16 bits, obere 4 bits kwekọrọ na ọwa 1-4, nkwụsị maka 1 (ON), nkịtị maka 0 ( Gbanyụọ).

2. Modul eji dị ka remote IO

Haiwell PLC ịgbasa modul arụnyere na-na otu RS485 nkwurịta okwu n'ọdụ ụgbọ mmiri (Ụfọdụ ụdị nwere Ethernet nkwurịta okwu n'ọdụ ụgbọ mmiri), nke na-abụghị nanị na-akwado yiyi ụgbọ ala (Jiri mgbasawanye ụgbọ ala jikọọ na yiri interface nke onye ọbịa PLC), ma na-akwado serial ụgbọ ala (Jiri. na RS485 nkwurịta okwu n'ọdụ ụgbọ mmiri nke modul netwọk na nkwurịta okwu ọdụ ụgbọ mmiri nke PLC, na onye ọbịa PLC na-achịkwa ime modul site na nkwurịta okwu ntụziaka), mgbe ị na-eji serial ụgbọ ala ịgbasa (ya bụ, remote IO modul), ọ dịghị enwe mgbasawanye ịgba nke usoro ihe na ike kesaa echichi.

Ekesa echichi dị ezigbo mkpa maka usoro nke kwesịrị ịnakọta na nyochaa ọnụ ọgụgụ buru ibu nke decentralized dijitalụ ma ọ bụ analog mgbaàmà (okpomọkụ, iru mmiri, dị iche iche nrụgide, ịfụ ọnụego, eruba, fan ọsọ, valve oghere, wdg), ọ nwere ike mfe nweta. na-ekesa njikwa nrụnye na isi ihe na-akparaghị ókè nke mgbasawanye, na-emeziwanye usoro nhazi usoro nchịkwa na-agbanwe agbanwe na ikike mgbasawanye nchịkwa n'ọdịnihu, na-ebelata ọnụ ọgụgụ nke wiring mgbama, na-ebelata nsogbu nnyonye anya nke ogologo akara mgbaàmà analog, na-azọpụta ụgwọ ọrụ ntinye ego.
Ndị na-esonụ ga-ewebata isi ihe na usoro ọrụ.

2.1. Modul ọkọnọ ike

Mgbe ejiri modul ahụ dị ka IO dịpụrụ adịpụ, enwere ụdị nhọrọ abụọ nke 24VDC na 220VAC, dị ka ụdị S08AI maka ọkụ ọkụ DC 24V. S08AI2 maka ọkụ ọkụ AC 220V. Ọ bụrụ na ejiri modul na-arụ ọrụ nke ọma, ihe ngosi PWR ga-enwu.

2.2. Okwu mmeghe ọdụ ụgbọ mmiri 1

Arụnyere modul analog niile n'ọdụ ụgbọ mmiri RS485. 2 Maka modul analog nke 8, ị nwere ike ịhọrọ ọdụ ụgbọ mmiri Ethernet. Enwere ike iji ọdụ ụgbọ mmiri RS3 na ọdụ ụgbọ mmiri Ethernet n'otu oge, maka exampLe, RS485 nke modul na-ekwurịta okwu na PLC, ọdụ ụgbọ mmiri Ethernet nwekwara ike ịkparịta ụka na ọtụtụ kọmputa ndị ọbịa (ruo 7).

2.3. Usoro nzikọrịta ozi na paramita ndabara RS485:

Nkwado ọkọlọtọ Modbus RTU / ASCII protocol, ọ nwere ike na-ekwurịta okwu na nhazi, ihuenyo mmetụ, ederede, PLC na ndị ọzọ ọbịa kọmputa, nke ga-akwado Modbus protocol. N'ime ha: Enwere ike ịtọ adreesị: 1 ~ 254; A na-ekewa adreesị modul n'ime adreesị dị nro na adreesị siri ike, adreesị siri ike nwere nke kachasị elu
mkpa. Adreesị dị nro: Adreesị e debere site na ngwanrọ mmemme - ngwá ọrụ dịpụrụ adịpụ, ebe adreesị 1-254; Adreesị siri ike: Adreesị edobere site na mgba ọkụ 4-bit DIP nke ngwaike modul, adreesị nso 1-15. Adreesị ngwaike
ntọala exampLe:

Ọnụọgụ Baud: 2400, 4800, 9600, 19200, 38400, 57600, 115200 nhọrọ; Usoro data: N, 8, 2 RTU, E, 8, 1 RTU, O, 8, 1 RTU, N, 8, 1 RTU, E, 7, 1 ASCII, O, 7, 1 ASCII, N, 7, 2 ASCII nhọrọ. RS485 ndabara oke: 19200, N 8 2 RTU, ọdụ ọdụ bụ 1.

Ethernet +: Na-akwado ọkọlọtọ Modbus TCP protocol, ọ nwere ike ikwurịta okwu na nhazi, ihuenyo mmetụ, PLC na kọmputa ndị ọzọ na-akwado ndị ọzọ, nke ga-akwado Modbus TCP protocol. N'etiti ha:
Ihe ndabara Ethernet: IP: 192.168.1.111 Subnet mask: 255.255.255.0 Ọnụ ụzọ ámá: 192.168.1.1

2.4. Usoro mmeghe usoro nhazi modul, mgbe ejiri modul dị ka IO dịpụrụ adịpụ Enwere ụzọ atọ iji hazie paramita IO dịpụrụ adịpụ:

1 Enwere ike ịhazi ya site na ngwanrọ mmemme - ngwaọrụ - modul dịpụrụ adịpụ (atụ aro); 2 Enwere ike ịhazi ya site na nhazi ngwaike na ntuziaka TO, mgbe etinyere modul n'azụ PLC onye ọbịa
site na ọdụ ụgbọ mmiri yiri ya; 3 Enwere ike hazie ya site na ntuziaka MODW site na nzikọrịta ozi.

2.5. Nhazi nhazi exampLe:

A na-ahazi modul ahụ site na mmemme ngwanrọ remote modul ngwa njikọ Hardware
1 Site na RS485 nkwurịta okwu n'ọdụ ụgbọ mmiri (ọnụ nke A +, B- na modul) njikọ: Ọ bụrụ na kọmputa nwere serial ọdụ ụgbọ mmiri, i nwere ike iji converter nke 232 ka 485 jikọọ na modul; Ọ bụrụ na ọ nwere otu interface USB, ị nwere ike iji ihe ntụgharị nke USB gaa na 485 jikọọ na modul.
2 Site na njikọ nke Ethernet + nkwurịta okwu interface: Ị nwere ike jikọọ modul na kọmputa netwọk ọdụ ụgbọ mmiri ozugbo site ọkọlọtọ netwọk cable, ma ọ bụ were kọmputa na modul jikọọ na mgba ọkụ.
Usoro ọrụ ngwanrọ Pịa na menu mmanya ngwá ọrụ nke mmemme mmemme- “modul remote”:

Pịa bọtịnụ dị na windo mmapụta ka imepe windo "Online". Adreesị ndabara modul bụ 1,19200, N 8 2 RTU, ihe ịga nke ọma n'ịntanetị bụ nke a:

13/18

www.haiwell.com

Haiwell PLC – Okwu ngwa Module Analog

Ọ bụrụ na enwere naanị otu igwe ejikọrọ na ahịrị 485, wee lelee “chọọ naanị ya”; Ọ bụrụ na e nwere ihe karịrị otu, wee wepụ bọtịnụ nke "nchọgharị kwụ ọtọ", ma tọọ adreesị mmalite na adreesị njedebe, ka enwere ike ịchọta igwe niile ejikọrọ na akara 485 wee nweta nhazi nhazi.
Pịa ka ịpụ, tinye nhazi nhazi, dị ka egosiri n'okpuru:

Anyị nwere ike ịgbanwe aha modul, adreesị, IP, subnet mask, baud ọnụego, data usoro na ndị ọzọ nkwurịta okwu parameter na mpaghara oke.
Na mpaghara ntinye analọgụ mpụga, anyị nwere ike ịtọ ụdị mgbaàmà nke ọwa ọ bụla, họrọ ma ị ga-eji uru injinia ma ọ bụ na ọ bụghị, oke elu na nke ala nke uru injinia (enwere ike ịtọ ya ma ọ bụrụ na ịlele ojiji nke uru injinia), s.ampling times na efu mgbazi.
14/18

www.haiwell.com

Haiwell PLC – Okwu ngwa Module Analog

Mgbe ịtọchara, họrọ “nbudata paramita” ka ibudata oke n'ime modul.

Na mgbakwunye, anyị nwere ike ime ọrụ ndị a site na ngwa modul dịpụrụ adịpụ: Nleba anya n'ịntanetị na uru ọwa nke modul, koodu njehie. Bulite paramater modul, kwalite firmware modul, wee mee ka modul kwado atụmatụ ọhụrụ. Ọ nwere ike mbupụ nhazi modul iji chekwaa ma ọ bụ bubata ma weghachi uru ndabara.

2.6. Ngwa IO dịpụrụ adịpụ example (ụdị RS485):

PLC na-agụ ụkpụrụ 4 nkwurịta okwu okpomọkụ nke S04AI modul 1 Akụrụngwa wiring: PLC na-ejikọta na 485 ọdụ ụgbọ mmiri nke modul site na mkpuchi mkpuchi, A + na-ejikọta na A +, B- na-ejikọta na B-, ma ọ bụrụ na PLC na-ejikọta na ọtụtụ modul IO dịpụrụ adịpụ. , ọ kwesịrị iji aka na aka ụzọ jikọọ. 2 Modbus adreesị: Site na tebụl paramita CR analog nke dị n'elu 4 na-egosi na, a na-echekwa ụkpụrụ ntinye ọwa 1 ~ 4 na 10H ~ 13H nke S04AI modul. 3 PLC mmemme: PLC onye ọbịa chọrọ ịgụ ụkpụrụ ọkwa ọkwa mmiri 4-ọwa nke IO modul S04AI, 0 ~ 1000 na-egosi na 0 ~ 1.0m. Na nke a example, S04AI nzikọrịta ozi bụ ndabara paramita: Station nọmba adreesị bụ 1, baud ọnụego bụ 19200, data usoro bụ N 8 2 RTU. Mmemme PLC na-agụ ụkpụrụ ọkwa mmiri ọwa 4 dị ka ndị a:

Onye ọbịa PLC na-agụ ụkpụrụ ọkwa mmiri nke 4-ọwa nke S04AI site na Modbus na-agụ ntụziaka MODR, adreesị mmalite bụ 10H (hexadecimal), ya bụ, ọnụ ọgụgụ iri bụ 16. Mgbe nkwurịta okwu na-aga nke ọma, M0 bụ ON, ọkwa mmiri. A ga-echekwa ụkpụrụ a na-agụ azụ na V0-3, V0=235, na-egosi na ezigbo okpomọkụ nke ọwa mbụ bụ 0.235m, otu ihe ahụ dị ka V3=867, na-egosi na ezigbo okpomọkụ nke ọwa nke anọ bụ 0.867m.

2.7. Ngwa IO dịpụrụ adịpụ example (ụdị RS485):

PLC na-ede ụkpụrụ mmepụta 8-ọwa nke S08AO modul 1 wiring hardware: PLC na-ejikọta na ọdụ ụgbọ mmiri 485 nke modul site na ụzọ gbagọrọ agbagọ, A + na-ejikọta na A +, B- jikọọ na B-, ma ọ bụrụ na PLC jikọọ na ọtụtụ IO dịpụrụ adịpụ. modul, ọ kwesịrị iji aka n'ụzọ aka jikọọ. 2 Modbus adreesị: Site n'elu 8-channel analọg CR parameter table na-egosi na, ọwa 1 ~ 8 mmepụta ụkpụrụ nke S08AO modul na-echekwara na adreesị 10H ~ 17H . 3 PLC mmemme: PLC onye ọbịa chọrọ ide ụkpụrụ mmepụta analog nke ọwa 8 nke IO modul S08AO dịpụrụ adịpụ. Na nke a example, S08AO nkwurịta okwu parameters: Station nọmba adreesị bụ 2 (tọrọ site DIP mgba ọkụ), baud ọnụego 19200, data usoro N 8 2 RTU. Mmemme nke ide ụkpụrụ mmepụta analọgụ 8 ọwa bụ nke a:

Onye ọbịa PLC na-ede ụkpụrụ mmepụta analog nke 8-ọwa nke S08AO site na Modbus dee ntụziaka MODW, adreesị mmalite bụ 10H (hexadecimal), ya bụ, ọnụọgụ iri bụ 16. Mgbe ị na-ede ihe nke ọma, M1 bụ ON, 8-channel values ​​nke. A ga-edebanye aha n'ime ya na V1000-1007.
Na nke a example, maka ọwa 1 nke mmepụta analọg, lelee iji uru injinia, ọnụ ahịa dị ala bụ 0, ọnụ ahịa oke elu bụ 3600, na-egosi na oghere valvụ bụ 0.0 ~ 360.0 Celsius, ikpe a V1000 = 500, yabụ na uru ọwa mmepụta mbụ bụ 500, ya bụ, oghere valve bụ 50.0 °.

2.8. Ngwa IO dịpụrụ adịpụ example (Ụdị netwọk):

PLC na-agụ ma dee ntinye ọwa ọ bụla na ụkpụrụ mmepụta nke S08XA-e

1. Ngwa ngwa wiwi: PLC na modul Ethernet ọdụ ụgbọ mmiri ejikọrọ na eriri netwọk echedoro, ha nwere ike jikọọ ozugbo ma ọ bụ site na ngbanwe.
2. Adreesị Modbus: Site na S08XA-e analog modul CR parameter table na-egosi na a na-echekwa ụkpụrụ ntinye nke ọwa ntinye modul 1 ~ 4 na adreesị 10H ~ 13H. A na-echekwa ụkpụrụ mmepụta nke ọwa mmepụta modul 1-4 na 2AH ~ 2DH.
3. Mmemme PLC: Gụọ nha 4-ọwa nke ọdụ ụgbọ mmiri Ethernet S08XA-e wee dee ụkpụrụ mmepụta 4 nke S08XA-e, ma ọ bụrụ na adreesị IP modul bụ 192.168.1.112, adreesị nọmba ọdụ bụ 1, a na-echekwa nsonaazụ ịgụ. na V0 ~ V3, a na-echekwa ụkpụrụ ndị a ga-ede na ndekọ V10-V13. Dị ka ndị a:

2.9. Nhazi Haiwell Cloud na-ekwurịta okwu ozugbo na S08AI modul example

Mepee ngwanrọ Haiwell SCADA, họrọ “ọrụ ọhụrụ” ahụ, họrọ ịgbakwunye ngwaọrụ na “ngwaọrụ” wee họrọ ọdụ ụgbọ mmiri ma ọ bụ Ethernet dị ka modul nke na-akwado Ethernet ma ọ bụ RS485, nke a bụ ex.ampmaka ọdụ ụgbọ mmiri serial, nọmba ọdụ ụgbọ mmiri nke USB ruo 485 bụ COM6, dị ka egosiri n'okpuru:
Oke ndabara 19200 N 8 2 RTU maka modul, adreesị nọmba ọdụ bụ 1. Ma họrọ ozugbo Haiwell remote modul ọkwọ ụgbọ mmiri na Oghere Usoro ọdụ ụgbọ mmiri.

Pịa OK, mgbe ahụ, a kpaliri anyị ịmalite ịtọ mgbanwe, nhazi nke mgbanwe asatọ na-egosi ọwa 8:

www.haiwell.com

Haiwell PLC – Okwu ngwa Module Analog

Mgbe ahụ guzobe ihuenyo ahụ, anyị nwere ike iji ihe ngosi primitives iji jikọta ụkpụrụ mgbanwe ọwa kwekọrọ. Ọ bụrụ na ịchọrọ igosipụta ebe nrịbasị ahụ, ọ nwere ike ịtọ ebe nrịbama kwekọrọ na ihe ngosi mbụ. Dị ka egosiri n'okpuru:

Daalụ maka ịhọrọ Haiwell PLC, Ọ bụrụ na ị nwere ajụjụ ọ bụla gbasara ngwaahịa ma ọ bụ ọrụ anyị, biko mee ka anyị mara! Haiwell websaịtị: www.haiwell.com Nwebiisinka © 2005 Xiamen Haiwell Technology Co., Ltd.

Akwụkwọ / akụrụngwa

	Haiwell S08AO2-E PLC Analog Module [pdf] Akwụkwọ ntuziaka onye ọrụ S08AO2-E, PLC Analog Module
	Haiwell S08AO2-E PLC Analog Module [pdf] Akwụkwọ ntuziaka onye ọrụ S08AO2-E, PLC Analog Module

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ