Getac GET-140 Module Instruction Manual

Akwụkwọ ntuziaka nwụnye GET-140

A. The echichi eruba chaatị dị ka ndị a:

B. The detailed installation process is as follows:

Attach shielding materia:

1.1. Use amorphous laminating machine, adjust the parameters before use;
1.2. Joint before must ensure the neatness of PCB, shielding materials, PCB, shielding materials and platform must be perfectly, can’t offset, shielding material can’t fold, not beyond the PCB edge, the intracrystalline shrinkage is less than 1.0 mm. Figure 1 and 2:

Split control card :

A na-etinye kaadị njikwa na oghere a kapịrị ọnụ, pịa bọtịnụ ọrụ, kewaa kaadị njikwa. Dị ka e gosiri na foto 3:

Installation control card :
Fanye nsọtụ mkpịsị aka ọla edo abụọ nke FPC na oghere njikọ n'otu oge ma fanye njikọ ahụ nke ọma.
Pịa ahịrị na ala nke njikọ wee pịa mkpuchi njikọ,

The performance test:

Nwalee panel electromagnetic a ga-anwale site na ijikọ ngwa ule na akụrụngwa nnwale:
Leba anya ma enwere mgbada, mgbaji ahịrị, cursor adịghị n'ọnọdụ, ịma jijiji na ntụpọ ndị ọzọ.

Clean the PCB:

Jiri akwa na-enweghị uzuzu hichaa n'ihu na azụ nke efere antenna.

Double-sided tape on the back of control card:

N'azụ kaadị njikwa, mado 30 * 20 * T0.1mm nrapado akụkụ abụọ,

Double-sided adhesive is affixed to the back of antenna plate:

A na-apịaji efere antenna ma mado ya na nrapado nwere akụkụ abụọ ojii 3M.

Fixed control panel :

A na-apịaji FPC nke efere antenna site na iji ngwaọrụ mpịachi, na kaadị njikwa na-edozi n'azụ efere antenna,

Nkwupụta nnyonye anya Federal Communication Commission

Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. Ọrụ dị n'okpuru ọnọdụ abụọ ndị a: (1) Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike bute ọrụ na-achọghị.
A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị B, dabere na akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta, na-eji ma nwee ike ịgbasa ike ugboro redio na, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu n'ime usoro ndị a:

• Megharịa ma ọ bụ bugharịa antenna nnata.
• Mee ka nkewa dị n'etiti akụrụngwa na nnata.
• Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata.
• Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.

Akpachara anya FCC: Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ akụrụngwa a.
Agaghị ejikọta ihe nnyefe a ma ọ bụ na-arụ ọrụ na njikọ antenna ma ọ bụ nnyefe ọ bụla ọzọ.
This module has been tested for compliance to FCC Part 15.209 and 15.207
A nwalere modul a maka ọnọdụ ojiji mkpughe RF mkpanaka kwụ ọtọ. Ọnọdụ ojiji ọ bụla ọzọ dị ka njikọta ya na ndị na-ebunye ndị ọzọ ma ọ bụ iji ya mee ihe n'ọnọdụ enwere ike ibugharị ga-achọ nyocha ọzọ dị iche site na ngwa mgbanwe klaasị II ma ọ bụ asambodo ọhụrụ.
A nwalere nnyefe a na ọnọdụ mkpughe RF ekwentị kwụụrụ onwe yana nnyefe ọ bụla enwere ma ọ bụ n'otu oge na mbufe (s) ndị ọzọ ma ọ bụ ojiji enwere ike ga-achọ nyocha mgbanwe klaasị II dị iche ma ọ bụ asambodo ọhụrụ.
2.2 Ndepụta nke iwu FCC dị
This module has been tested for compliance to FCC part 15.209 and 15.207
2.3 Summarize the specific operational use conditions.
This module is exclusively for use in the host device G140, G140Y(Y= 10 characters, Y can be 0 to 9, A to Z, a to z, “/”, “1”, “-“, ” or blank for marketing purpose) incorporates this module (module model name GET-140 and the antenna certified for use with this module.
Incorporating this module into a host device other than G140, G140Y(Y= 10 characters, Y can be 0 to 9, A to Z, a to z, “/”, “”, “-“, “_” or blank for marketing purpose) will require a separate reassessment through a class II permissive change or new certification. Full testing for the new specific host is required.
Usoro modul 2.4 nwere oke
This Limited module if used on any new host configuration, field strength (15.209), RF exposure and EMI (15.107, 15.109) items should be re-tested and will require FCC permissive change filing by grantee.

2.5 trace antennas designs
Ọ metụtaghị.
2.7 Antenna

Enyerela antenna ndị a maka iji modul a; Enwere ike iji eriri nke otu ụdị nwere uru nha ma ọ bụ nke dị ala na modul a.
This module is limited for Getac’s hosts only. Incorporating this module into a host device other than G140, G140Y(Y= 10 characters, Y can be 0 to 9, A to Z, a to z, “/”, “”, “-“, “_” or blank for marketing purpose) will require a separate reassessment through a class II permissive change or new certification. The following test plan for the new specific host is required.

Test Plan(for being installed into the new specific host)
1. RF:

2. RF ngosi
3. EMI:

2.12 Otu esi eme mgbanwe
Only Grantees are permitted to make permissive changes. Please contact us should the host integrator expect the module to be used differently than as granted.
Grantee Information:
Company Name: Getac Technology Corporation
Contact person: Kevin Chiang
FRN: 0018268243
Street Address: 5F., Building A, No.209, Sec. 1 Nangang., Rd.
City/Province/Zip: Taipei City, 11568, Taiwan
Telephone No: +886-2-27857888
Email: kevin.chiang@getac.com.tw

Nkwupụta Mkpughe Radiation:
Ngwaahịa a na-akwado oke mkpughe RF obere FCC nke edobere maka gburugburu anaghị achịkwa yana ọ nweghị nchekwa maka ọrụ e bu n'obi rụọ ọrụ dịka akọwara n'akwụkwọ ntuziaka a. Enwere ike nweta mbelata mkpughe RF ọzọ ma ọ bụrụ na enwere ike idobe ngwaahịa ahụ ka o kwere mee site na ahụ onye ọrụ ma ọ bụ tọọ ngwaọrụ ka ọ wedata ike mmepụta ma ọ bụrụ na ọ dị.
Akụrụngwa a na-akwado FCC mmachi mkpughe radieshon ekwenyere maka gburugburu enweghị njikwa.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. If the module is installed in a portable host, a separate SAR evaluation is required to confirm compliance with relevant FCC portable RF exposure rules.
IHE DỊ MKPA
Ọ bụrụ na enweghị ike imezu ọnọdụ ndị a (maka exampụfọdụ nhazi laptọọpụ ma ọ bụ ọnọdụ ya na onye na-ebufe ọzọ), mgbe ahụ, ikike FCC agaghịzi ewere dị irè yana enweghị ike iji ID FCC na ngwaahịa ikpeazụ. N'ọnọdụ ndị a, onye ntinye OEM ga-ahụ maka nyochaghachi ngwaahịa njedebe (gụnyere onye na-ebugharị) na ịnweta ikike FCC dị iche.
Kwụsị akara ngwaahịa:
The final end product must be labeled in a visible area with the following: “Contains FCC ID:QYLGET140G14”.
Enwere ike iji ID FCC nke onye nyere ya naanị mgbe emezuru ihe niile FCC chọrọ.
Ozi ntuziaka Nye onye ọrụ njedebe
Onye mmekọ OEM kwesịrị ịma ka ọ ghara inye onye ọrụ njedebe ozi gbasara otu esi etinye ma ọ bụ wepu modul RF a n'akwụkwọ ntuziaka onye ọrụ nke ngwaahịa ngwụcha nke jikọtara modul a. Akwụkwọ ntuziaka njedebe ga-agụnye ozi/ịdọ aka ná ntị usoro iwu niile achọrọ dị ka egosiri n'akwụkwọ ntuziaka a.
Ọrụ OEM / Ọbịa na-emepụta ihe
Ndị na-emepụta OEM/Ọbịa bụ n'ikpeazụ maka nnabata nke onye ọbịa na modul. A ga-enyochaghachi ngwaahịa ikpeazụ megide ihe niile dị mkpa nke iwu FCC dị ka FCC Nkebi 15 nkebi B tupu etinye ya n'ahịa US. Nke a gụnyere nyochagharị modul nnyefe maka nnabata na Redio na EMF dị mkpa chọrọ nke iwu FCC. Agaghị etinye modul a n'ime ngwaọrụ ma ọ bụ sistemu ọ bụla na-enweghị nyochagharị maka nnabata dị ka redio ọtụtụ na akụrụngwa jikọtara ọnụ.
A nwalere modul nnyefe a dị ka sistemu subsystem yana asambodo ya anaghị ekpuchi FCC Nkebi 15 nkebi B (radiato na-amaghị ama) chọrọ maka ndị ọbịa ikpeazụ. Onye ọbịa ikpeazụ ka ga-achọ nyochagharị maka irube isi na akụkụ iwu a chọrọ ma ọ bụrụ na ọdabara.
Ọ bụrụhaala na emezuru ọnọdụ niile dị n'elu, a gaghị achọ nnwale nnyefe ọzọ. Agbanyeghị, onye nrụpụta OEM ka na-ahụ maka ịnwale ngwaahịa njedebe ha maka nrube isi ọ bụla achọrọ na modul a arụnyere.

Nkwupụta ụlọ ọrụ Canada:

Ngwaọrụ a na-akwado RSSs enweghị ikikere ISED. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:
(1) Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ achọghị.
IHE dị mkpa:
Ọ bụrụ na enweghị ike imezu ọnọdụ ndị a (maka exampụfọdụ nhazi laptọọpụ ma ọ bụ ọnọdụ ya na onye na-ebufe ọzọ), mgbe ahụ, a naghị ele ikike Canada anya ka ọ dị irè na enweghị ike iji ID IC na ngwaahịa ikpeazụ. N'ọnọdụ ndị a, onye ntinye OEM ga-ahụ maka nyochaghachi ngwaahịa njedebe (gụnyere onye na-ebugharị) yana nweta ikike Canada dị iche.
Kwụsị ntinye aha ngwaahịa
The product can be kept as far as possible from the user body or set the device to lower output power if such function is available. The final end product must be labeled in a visible area with the following: “Contains IC: 10301A-GET140G14”.
Ozi ntuziaka Nye onye ọrụ njedebe
Onye mmekọ OEM kwesịrị ịma ka ọ ghara inye onye ọrụ njedebe ozi gbasara otu esi etinye ma ọ bụ wepu modul RF a na ntuziaka onye ọrụ nke ngwaahịa ngwụcha nke jikọtara modul a.
Akwụkwọ ntuziaka njedebe ga-agụnye ozi/ịdọ aka ná ntị usoro iwu niile achọrọ dị ka egosiri n'akwụkwọ ntuziaka a.

Ezubere ngwaọrụ a naanị maka ndị nrụpụta OEM n'okpuru ọnọdụ ndị a:

1. Modul nnyefe nwere ike ọ gaghị ejikọta ya na ihe mgbasa ozi ma ọ bụ antenna ọ bụla ọzọ.
2. Nkwenye modul na-arụ ọrụ naanị mgbe etinyere modul n'ime onye ọbịa nwalere ma ọ bụ usoro nnabata dakọtara nke nwere njirimara mkpughe RF yiri ya na anya nkewa antenna nha ma ọ bụ buru ibu.

Ọ bụrụhaala na ezuru ọnọdụ abụọ dị n'elu, a gaghị achọ nyocha ọzọ nke nnyefe. Agbanyeghị, onye nrụpụta OEM ka na-ahụ maka ịnwale ngwaahịa njedebe ha maka nrube isi ọ bụla achọrọ na modul a arụnyere.
Nkwupụta Mkpughe Radiation:
Ngwaahịa a na-akwado oke mkpughe RF dị obere na Canada nke edobere maka gburugburu anaghị achịkwa yana ọ nweghị nchekwa maka ọrụ e bu n'obi rụọ ọrụ dịka akọwara n'akwụkwọ ntuziaka a. Enwere ike nweta mbelata mkpughe RF ọzọ ma ọ bụrụ na enwere ike idobe ngwaahịa ahụ ka o kwere mee site na ahụ onye ọrụ ma ọ bụ tọọ ngwaọrụ ka ọ wedata ike mmepụta ma ọ bụrụ na ọ dị.

Nweta-140
FCC ID: QYLGET140G14
IC: 10301A-GET140G14