ESBE CRK210 Controller User Guide

ESBE CRK210 Controller

ESBE Series CRK210 jikọtara actuators na njikwa. Usoro CRK210 na-enye njikwa okpomọkụ mgbe niile maka ngwaọrụ nwere ọrụ kpo oku & nju oyi. Ezubere usoro CRK210 ka eji ya na valves Series VRx.

Ọrụ

• The CRK210 is a constant temperature controller intended for applications where a constant flow temperature is desired. The controller is integrated with an actuator and is designed to be used with rotating mixing valves series VRx.
• The Series CRK210 consists of two main components: an actuator and a flow temperature sensor. The primary function of the controller is to maintain a constant set temperature at the sensor location. The series includes a T/T2 (main temperature to alternative temperature) setting, which also controls the opening direction of the actuator. This feature is intended for devices with combined heating and cooling functions set by relay. Additional equipment, such as a clock, may be needed to release the relay if the heating/cooling unit lacks an available control signal. Releasing the relay changes the actuator’s working direction to match the source unit’s mode (heating or cooling). Settings are adjusted via a joystick and displayed on a screen.

Introduction of ESBE Self-Adaptive System

The ESBE Self-Adaptive System manages PI factors (Proportional gain and Integral response) by learning system behaviors and addressing issues previously managed by installers. This system ensures smooth controller operation, eliminates issues related to delays or response times, and delivers high control standards and comfort. This makes the CRK210 Series suitable for any system setup or environment.

Ịwụnye

• Ọkụ ọkụ site na ihe nkwụnye ọkụ AC 230 V (zuru oke na mgbanaka, eriri na plọg oghere mgbidi).
• Ihe mmetụta okpomọkụ na-efe efe na-abịa na eriri 1,5m gụnyere (ụkpụrụ ogologo dị ka ngwa). Ekwesịrị iji nlezianya kpuchie ihe mmetụta ahụ site na ọnọdụ okpomọkụ.
• Ekele maka interface pụrụ iche n'etiti usoro njikwa CRK210 na usoro ESBE VRG na VRH, otu ahụ n'ozuzu ya nwere nkwụsi ike pụrụ iche na nkenke mgbe ị na-achịkwa.

Akụrụngwa nhọrọ

• Art. No. 16200700: ARA801 Auxiliary switch kit
• Art. No. 17053100: CRA911 Flow temperature sensor, 5m cable
• Art. No. 17056200: CRA915 UK plug

Valves Ngwakọta dabara adaba

• Usoro VRG130
• Usoro VRG230
• Usoro VRG330
• Usoro VRH130
• Usoro 3MG
• Usoro 3G
• Series 3F DN50

Ihe nkwụnye Ngwa
Required adaptor kits for easy fitting onto an ESBE rotary mixing valve series VRx are supplied with each controller. Adaptor kits can also be ordered separately.

• Art. No. 16000500: ESBE valve series VRG, VRH, G, MG, F
• Art. No. 16000600: Meibes
• Art. No. 16000700: Watts
• Art. No. 16000800: Honeywell Corona
• Art. No. 16000900: Lovato
• Art. No. 16001000: PAW
• Art. No. 16001100: Wita Minimix, Maximix

ECHICHE

Technical Data Details

• Ambient temperature: max. +55°C, min. -5°C
• Ụdị ihe mmetụta: NTC
• Temperature range: Flow temperature sensor +5 to +95°C
• Enclosure rating, Actuator unit: IP41
• Klas nchekwa: II
• Power supply, Actuator unit: 230 ± 10% V AC, 50 Hz
• Power consumption (230 V AC): 10 VA
• Torque (Actuator): 6 Nm
• Running time at max. speed (Actuator): 30s
• ErP Temperature control class: N/A
• Energy efficiency contribution: N/A

Complies with LVD 2014/35/EU, EMC 2014/30/EU, RoHS 2011/65/EU

EGBE EZI EXAMPLE

Okpomọkụ na-erugharị mgbe niile na-aga na sekit kpo oku
CRK210 na-achịkwa ma na-echekwa ọnọdụ okpomọkụ nke agbapụtara agbapụta. Ejikọtara onye njikwa na ngwaọrụ ahụ na-arụ ọrụ kpo oku na ikpo ọkụ. A na-eme njikọ ahụ site na relay, nke mgbe a tọhapụrụ ga-agbanwe ụzọ mmeghe nke CRK210. Njirimara a na-enye ohere ka CRK210 gbanwee ụkpụrụ ọrụ n'etiti ikpo ọkụ ma ọ bụ ikpo ọkụ na-arụ ọrụ nke ngwaọrụ kpo oku / oyi.

Ngwa egosiri bụ naanị examples of product use! Before using the product in any application, the regional and national regulations need to be checked.