ENGO na-achịkwa EFAN-24 PWM Onye njikwa ọsọ ọsọ
Nkọwapụta
- Protocol: MODBUS RTU
- Ụdị njikwa: EFAN-24
- Njikọ njikọ: RS485
- Ọnụ adreesị: 1-247
- Nha data: 32-bit
Ntuziaka ojiji ngwaahịa
- Nhazi nke onye njikwa EFAN-24 ga-enwerịrị onye tozuru oke nwere ikike na nka nka kwesịrị ekwesị, na-agbaso ụkpụrụ na ụkpụrụ mba na EU.
- Ọdịda ịgbaso ntuziaka nwere ike mebie ọrụ onye nrụpụta.
- Onye njikwa ahụ nwere ike ịrụ ọrụ dị ka ohu na netwọọdụ MODBUS RTU nwere njirimara akọwapụtara yana chọrọ nkwukọrịta. Gbaa mbọ hụ na nhazi wiwi kwesịrị ekwesị iji zere nrụrụ data.
- Njikọ netwọk: RS-485 serial interface
- Nhazi data: A na-ekpebi adreesị, ọsọ na usoro site na ngwaike
- Ịnweta data: Ịnweta zuru oke na data mmemme ọkwa ọkwa onye njikwa
- Nha data: 2 bytes kwa ndekọ data MODBUS
- Tupu ijikọ onye njikwa na netwọk RS-485, hụ na nhazi nke ọma nke ntọala nkwurịta okwu, gụnyere adreesị, ọnụego baud, parity, na nkwụsị nkwụsị.
- E kwesịghị ijikọ ndị na-ahụ maka njikwa na-enweghị nhazi na netwọk iji zere nsogbu arụ ọrụ.
ozi izugbe
Ozi izugbe gbasara MODBUS RTU
Ọdịdị MODBUS RTU na-eji usoro nna-ukwu-ohu na-agbanwe ozi. Ọ na-enye ohere kacha nke 247 ohu, mana naanị otu nna ukwu. Nna-ukwu na-achịkwa ọrụ nke netwọkụ ahụ, naanị ya na-eziga arịrịọ ahụ. Ndị ohu anaghị ebute ụzọ n'onwe ha. Nkwurịta okwu ọ bụla na-amalite site na nna ukwu na-arịọ ohu ahụ, nke na-aza nna ukwu ahụ ihe a jụrụ ya. Nna-ukwu (kọmputa) na-ekwurịta okwu na ndị ohu (njikwa) na ụdị RS-485-waya abụọ. Nke a na-eji ahịrị data A+ na B- maka mgbanwe data, nke ga-abụrịrị otu ụzọ gbagọrọ agbagọ.
Enweghị ike ijikọ ihe karịrị wires abụọ na njedebe nke ọ bụla, na-ahụ na a na-eji nhazi "Daisy Chain" (na usoro) ma ọ bụ "ahịrị kwụ ọtọ" (direct) nhazi. A naghị atụ aro njikọ kpakpando ma ọ bụ netwọk (emeghe), n'ihi na ntụgharị uche n'ime eriri nwere ike ịkpata nrụrụ data.
Nhazi
- Nhazi ga-abụrịrị onye tozuru oke nwere ikike na nka nka kwesịrị ekwesị, na-agbaso ụkpụrụ na ụkpụrụ nke obodo na EU.
- Agaghị ejide onye nrụpụta maka omume ọ bụla na-esoghị ntuziaka a.
IHE:
Enwere ike ịnwe ihe nchekwa ndị ọzọ maka nrụnye na nhazi niile, nke onye nrụnye / mmemme na-ahụ maka idowe.
Ọrụ netwọk MODBUS RTU – Ọnọdụ ohu
Onye njikwa MODBUS Engo nwere atụmatụ ndị a mgbe ọ na-arụ ọrụ dị ka ohu na netwọk MODBUS RTU:
- Njikọ netwọk site na RS-485 serial interface.
- A na-ekpebi adreesị, ọsọ nzikọrịta ozi na usoro byte site na nhazi ngwaike.
- Na-enye ohere ịnweta mmadụ niile tags na data ejiri na mmemme ubube onye njikwa.
- 8-bit adreesị ohu
- Nha data 32-bit (adreesị 1 = nloghachi data 32-bit)
- Ndebanye aha data MODBUS ọ bụla nwere nha nke 2 bytes.
IHE:
- Tupu ejikọrọ onye njikwa na netwọk RS-485, a ga-ebu ụzọ hazie ya nke ọma.
- A na-ahazi ntọala nkwurịta okwu na paramita ọrụ nke onye na-achịkwa (ngwaọrụ).
IHE:
- Ijikọ ndị na-ahụ maka njikwa na-enweghị nhazi na netwọk RS-485 ga-ebute ọrụ na-adịghị mma.
- Nwebiisinka - Enwere ike ịmegharị ma kesaa akwụkwọ a naanị site na ikikere nke njikwa Engo yana enwere ike ịnye naanị ndị ikike ma ọ bụ ụlọ ọrụ nwere nka nka chọrọ.
ntọala nkwurịta okwu
Ntọala nkwukọrịta RS-485
| Pxx | Ọrụ | Uru | Nkọwa | Ọdabara uru |
| Adikwa | MODBUS Adreesị ngwaọrụ ohu (ID). | 1-247 | MODBUS Adreesị ngwaọrụ ohu (ID). | 1 |
|
BAUD |
Baud |
4800 |
Bitrate (Baud) |
9600 |
| 9600 | ||||
| 19200 | ||||
| 38400 | ||||
|
PARI |
Parity bit – na-esetịpụ nha data maka nchọpụta njehie |
Ọ dịghị | Ọ dịghị |
Ọ dịghị |
| Ọbụna | Ọbụna | |||
| Odi | Odi | |||
| KWỤSỊ | StopBit | 1 | 1 nkwụsịtụ | 1 |
| 2 | 2 nkwụsịtụ |
Na-akwado koodu ọrụ ndị a:
- 03 - ịgụ n ndekọ (Njide ndị na-edebanye aha)
- 04 - ịgụ n ndekọ (Ndebanye aha ntinye)
- 06 - Dee ndekọ 1 (ndebanye aha)
Ndebanye aha INPUT - naanị gụọ
| Adreesị | Nweta | Nkọwa | Oke uru | pụtara | Ọdabara | |
| Dec | Hex | |||||
| 0 | 0x0000 | R (#03) | NJ Model MODBUS | 1-247 | MODBUS Ohu (ID) | 1 |
| 1 | 0x0001 | R (#03) | Firmware-ụdị | 0x0001-0x9999 | 0x1110=1.1.10 (koodu BCD) | |
|
2 |
0x0002 |
R (#03) |
Ọnọdụ ọrụ |
0b00000010=Akwụsịghị ọrụ, gbanyụọ 0b00000000=Arụghị ọrụ, ọnụ ụlọ na-ezute okpomọkụ 0b10000001=ekpo ọkụ 0b10001000=ajụ oyi
0b00001000 = Arụghị ọrụ, njehie sensọ |
||
| 3 | 0x0003 | R (#03) | Uru nke Integrated okpomọkụ ihe mmetụta, Celsius C | 50-500 | N-> temp=N/10 Celsius | |
|
5 |
0x0005 |
R (#03) |
Uru nke ihe mmetụta okpomọkụ Mpụga S1, Celsius C |
50-500 |
0 = Mepee (nkwụsịtụ ihe mmetụta)/ mepee kọntaktị
1 = Emechiri (Sensor short circuit)/ kọntaktị mechiri N-> temp=N/10 Celsius |
|
|
6 |
0x0006 |
R (#03) |
Uru nke ihe mmetụta okpomọkụ Mpụga S2, Celsius C |
50-500 |
0 = Mepee (nkwụsịtụ ihe mmetụta)/ mepee kọntaktị
1 = Emechiri (Sensor short circuit)/ kọntaktị mechiri N-> temp=N/10 Celsius |
|
|
7 |
0x0007 |
R (#03) |
Steeti fan |
0b00000000 - 0b00001111 |
0b00000000 = Gbanyụọ
0b00000001= I Fans stage ala 0b00000010= II Fan stage ọkara 0b00000100= III Fan steeti dị elu 0b00001000 = Nchekwa onwe - Gbanyụọ 0b00001001= Nchekwa onwe – I ala 0b00001010= Nchekwa onwe – II ọkara 0b00001100= Nchekwa onwe – III elu |
|
| 8 | 0x0008 | R (#03) | Valve 1 stats | 0-1000 | 0 = Gbanyụọ (valvụ mechiri emechi)
1000 = ON / 100% (valvụ mepere emepe) |
|
| 9 | 0x0009 | R (#03) | Valve 2 steeti | 0-1000 | 0 = Gbanyụọ (valvụ mechiri emechi)
1000 = ON / 100% (valvụ mepere emepe) |
|
| 10 | 0x000A | R (#03) | Ntụ iru mmiri (ya na 5% ziri ezi na-egosi) | 0-100 | N-> iru mmiri=N % | |
JIDE ndekọ – maka ịgụ na ide
| Adreesị | Nweta | Nkọwa | Oke uru | pụtara | Ọdabara | |
| Dec | Hex | |||||
| 0 | 0x0000 | R/W (#04) | NJ Model MODBUS | 1-247 | MODBUS Ohu (ID) | 1 |
|
234 |
0x00EA |
R/W (#06) |
Ụdị Fancoil |
1-6 |
1 = 2 ọkpọkọ - naanị kpo oku 2 = 2 ọkpọkọ - naanị jụrụ oyi
3 = 2 ọkpọkọ - kpo oku & jụrụ 4 = 2 ọkpọkọ - underfloor kpo oku 5 = 4 ọkpọkọ - kpo oku & jụrụ. 6 = 4 ọkpọkọ - kpo oku n'okpuru ala & jụrụ oyi site na fancoil |
0 |
|
235 |
0x00EB |
R/W (#06) |
Nhazi ntinye S1-COM (Prameters installer -P01) |
0 | Ntinye anaghị arụ ọrụ. Gbanwee n'etiti kpo oku na oyi na bọtịnụ. |
0 |
|
1 |
Ntinye eji agbanwe kpo oku / oyi site na kọntaktị mpụga ejikọrọ na S1-COM:
- S1-COM mepere -> Ọnọdụ okpomọkụ - S1-COM dị mkpụmkpụ -> ọnọdụ dị jụụ |
|||||
|
2 |
Ntinye eji eme ihe na-akpaghị aka na-agbanwe kpo oku/nju oyi dabere na PIPE TEMPERATURE na sistemu ọkpọkọ abụọ.
Onye njikwa na-agbanwe n'etiti kpo oku na ụdị jụrụ oyi dabere na ọkpọkọ okpomoku etinyere na paramita P17 na P18. |
|||||
|
3 |
Kwe ka fan arụ ọrụ dabere na nleta okpomọkụ na ọkpọkọ. Maka example, ma ọ bụrụ na okpomọkụ dị na ọkpọkọ dị oke ala, na onye njikwa ahụ nọ na ọnọdụ kpo oku
- Ihe mmetụta ọkpọkọ agaghị ekwe ka onye ofufe na-agba ọsọ. A na-eme mgbanwe nke kpo oku / oyi na aka, na-eji bọtịnụ. Edebere ụkpụrụ maka njikwa fan dabere na okpomoku ọkpọkọ na paramita P17 na P18. |
|||||
| 4 | Ịkwalite ihe mmetụta ala na nhazi ikpo ọkụ nke ala. | |||||
|
236 |
0x00EC |
R/W (#06) |
Nhazi ntinye S2-COM (Prameters installer -P02) |
0 | Agbanyụrụ ntinye |
0 |
| 1 | Ihe mmetụta obibi (mgbe emepere kọntaktị, rụọ ọrụ ECO mode) | |||||
| 2 | Ihe mmetụta okpomọkụ nke mpụga | |||||
|
237 |
0x00ED |
R/W (#06) |
Ụdị ECO nwere ike ịhọrọ (Prameters installer -P07) | 0 | Mba - Agbanyụrụ |
0 |
| 1 | EE – Na-arụ ọrụ | |||||
| 238 | 0x00EE | R/W (#06) | Uru ọnọdụ okpomọkụ nke ECO maka ikpo ọkụ (Permier installer -P08) | 50-450 | N-> temp=N/10 Celsius | 150 |
| 239 | 0x00EF | R/W (#06) | Uru ọnọdụ okpomọkụ nke ECO maka jụrụ oyi (Permier Installer -P09) | 50-450 | N-> temp=N/10 Celsius | 300 |
|
240 |
0x00F0 |
R/W (#06) |
ΔT nke 0-10V valve ọrụ
Oke a na-ahụ maka nrụpụta 0-10V nke valvụ a gbanwere. - Na ọnọdụ kpo oku: Ọ bụrụ na ọnụ ụlọ ahụ dara, valvụ ahụ na-emepe nha nha nha delta. - Na ọnọdụ jụrụ oyi: Ọ bụrụ na ọnụ ụlọ ahụ na-abawanye, valvụ ahụ na-emepe nha nha nke Delta. Oghere valvụ na-amalite site na ọnụ ụlọ setịpụrụ okpomọkụ. (Primate nke ntinye -P17) |
1-20 |
N-> temp=N/10 Celsius |
10 |
|
241 |
0x00F1 |
R/W (#06) |
Fan na okpomọkụ maka kpo oku
Onye ofufe ga-amalite ịrụ ọrụ ma ọ bụrụ na ọnọdụ okpomọkụ dị n'ime ụlọ ahụ daa n'okpuru nhazi site na uru nke oke (paramita ihe ntinye -P15) |
0-50 |
N-> temp=N/10 Celsius |
50 |
| Adreesị | Nweta | Nkọwa | Oke uru | pụtara | Ọdabara | |||
| Dec | Hex | |||||||
|
242 |
0x00F2 |
R/W (#06) |
Algọridim njikwa
(TPI ma ọ bụ hysteresis) maka valvụ kpo oku (P18) |
0-20 |
0 = TPI
1 = ± 0,1C 2 = ± 0,2C… N-> temp=N/10 Celsius (± 0,1…±2C) |
5 |
||
|
243 |
0x00F3 |
R/W (#06) |
FAN delta algọridim maka jụrụ oyi
Oke ihe na-ekpebi obosara nke oke okpomọkụ nke fan na-arụ ọrụ na ọnọdụ jụrụ oyi. Ọ bụrụ na okpomọkụ ụlọ na-abawanye, mgbe ahụ: 1. Mgbe obere uru nke Delta FAN, ngwa ngwa nzaghachi nke fan na mgbanwe okpomọkụ okpomọkụ - ngwa ngwa mmụba nke ọsọ.
2. Mgbe nnukwu uru nke Delta FAN, onye na-eji nwayọọ nwayọọ na-abawanye ọsọ. (Primate installer -P16) |
5-50 |
N-> temp=N/10 Celsius |
20 |
||
|
244 |
0x00F4 |
R/W (#06) |
Fan na okpomọkụ maka jụrụ oyi.
Onye ofufe ga-amalite ịrụ ọrụ ma ọ bụrụ na okpomọkụ dị n'ime ụlọ ahụ na-ebili n'elu setpoint site uru nke oke. (Perient ihe ntinye -P19) |
0-50 |
N-> temp=N/10 Celsius |
50 |
||
| 245 | 0x00F5 | R/W (#06) | Uru hysteresis maka valvụ jụrụ oyi (paramita ihe ntinye -P20) | 1-20 | N-> temp=N/10 Celsius (± 0,1…±2C) | 5 | ||
|
246 |
0x00F6 |
R/W (#06) |
Mpaghara nwụrụ anwụ nke ịgbanwee kpo oku/ajụjụ oyi
N'ime usoro 4-pipe. Ihe dị iche n'etiti Set okpomọkụ na ụlọ okpomọkụ, na nke onye njikwa ga-agbanwe na-akpaghị aka na kpo oku / oyi ọrụ mode. (Primate installer -P21) |
5-50 |
N-> temp=N/10 Celsius |
20 |
||
|
247 |
0x00F7 |
R/W (#06) |
Uru okpomọkụ na-agbanwe site na kpo oku gaa na jụrụ oyi
- 2-pipe usoro. Na usoro 2-pipe, n'okpuru uru a, usoro ahụ na-agbanye na ọnọdụ jụrụ oyi ma na-enye ohere ka onye ofufe malite. (Perient ihe ntinye -P22) |
270-400 |
N-> temp=N/10 Celsius |
300 |
||
|
248 |
0x00F8 |
R/W (#06) |
Uru nke mgbanwe okpomọkụ site na jụrụ na kpo oku, 2-pipe usoro.
Na usoro 2-pipe, n'elu uru a, usoro ahụ na-agbanye na ọnọdụ kpo oku ma na-enye ohere ka onye ofufe malite. (Perient ihe ntinye -P23) |
100-250 |
N-> temp=N/10 Celsius |
100 |
||
|
249 |
0x00F9 |
R/W (#06) |
Na-ajụ oyi na igbu oge.
Oke eji na sistemụ 4-pipe nwere ngbanwe akpaka n'etiti kpo oku na jụrụ oyi. Nke a na-ezere ngbanwe ugboro ugboro n'etiti ụdị kpo oku na nju oyi yana mkpọtu nke okpomọkụ ụlọ. (Pramate nke ntinye -P24) |
0 - 15 nkeji |
0 |
|||
|
250 |
0x00FA |
R/W (#06) |
Okpomọkụ ala kachasị elu
Iji kpuchido ala, a ga-agbanyụ ọkụ ọkụ mgbe ihe mmetụta nke ala na-ebili karịa uru kacha elu. (Primate installer -P25) |
50-450 |
N-> temp=N/10 Celsius |
350 |
||
|
251 |
0x00FB |
R/W (#06) |
Okpomọkụ ala kacha nta
Iji chebe ala, kpo oku ga-agbanye, mgbe ala ihe mmetụta okpomọkụ dara n'okpuru uru kacha nta. (Perient ihe ntinye -P26) |
50-450 |
N-> temp=N/10 Celsius |
150 |
||
| 254 | 0x00FE | R/W (#06) | Koodu PIN maka ntọala installer (Prameters installer -P28) | 0-1 | 0 = nkwarụ
1 = PIN (koodu nke mbụ 0000) |
0 | ||
| Adreesị | Nweta | Nkọwa | Oke uru | pụtara | Ọdabara | |
| Dec | Hex | |||||
| 255 | 0x00FF | R/W (#06) | Na-achọ koodu PIN iji kpọghee igodo (Installer Parameters -P29) | 0-1 | 0 = NEE
1 = TAK |
0 |
|
256 |
0x0100 |
R/W (#06) |
Ịrụ ọrụ fan (paramise installer -FAN) |
0-1 |
0 = Mba - anaghị arụ ọrụ - kọntaktị mmepụta maka njikwa fan na-enwe nkwarụ kpamkpam
1 = EE |
1 |
| 257 | 0x0101 | R/W (#06) | Gbanyụọ ma ọ bụ gbanyụọ - ịgbanyụ onye nhazi | 0,1 | 0 = Gbanyụọ
1 = Gbanye |
1 |
|
258 |
0x0102 |
R/W (#06) |
Ụdị ọrụ |
0,1,3 |
0= Akwụkwọ ntuziaka 1 = Usoro nhazi
3=FROST – ọnọdụ mgbochi ifriizi |
0 |
|
260 |
0x0104 |
R/W (#06) |
Ntọala ọsọ fan |
0b000000 = Gbanyụọ - onye ofufe kwụsịrị 0b00000001 = I (obere) ihe eji eme ihe 0b000010 = II (ọkara) ihe eji eme ihe 0b00000100 = III (elu) ihe eji egwu egwu
0b00001000 = Ọsọ onye ofufe akpaaka - Gbanyụọ 0b00001001 = Ọsọ fan akpaka - gia 1st 0b00001010 = Ọsọ fan akpaaka – gia 2nd 0b00001100 = Ngwa fan akpaaka – ngwa nke atọ |
||
| 262 | 0x0106 | R/W (#06) | Mkpọchi igodo | 0,1 | 0= akpọchiri akpọchi 1= akpọchiri akpọchi | 0 |
| 263 | 0x0107 | R/W (#06) | Gosipụta nchapụta (Prameters -P27) | 0-100 | N-> ihie =N% | 30 |
| 268 | 0C | R/W (#06) | Elekere - nkeji | 0-59 | Nkeji | 0 |
| 269 | 0x010D | R/W (#06) | Elekere - awa | 0-23 | Oge awa | 0 |
| 270 | 0x010E | R/W (#06) | Elekere - Ụbọchị izu (1 = Mọnde) | 1-7 | Ụbọchị nke izu | 3 |
| 273 | 0x0111 | R/W (#06) | Tọọ okpomọkụ na ọnọdụ nhazi oge | 50-450 | N-> temp=N/10 Celsius | 210 |
| 274 | 0x0112 | R/W (#06) | Tọọ okpomọkụ n'ụdị ntuziaka | 50-450 | N-> temp=N/10 Celsius | 210 |
| 275 | 0x0113 | R/W (#06) | Tọọ okpomọkụ na ọnọdụ FROST | 50 | N-> temp=N/10 Celsius | 50 |
| 279 | 0x0117 | R/W (#06) | Okpomọkụ setpoint kacha | 50-450 | N-> temp=N/10 Celsius | 350 |
| 280 | 0x0118 | R/W (#06) | Okpomọkụ setpoint kacha nta | 50-450 | N-> temp=N/10 Celsius | 50 |
| 284 | 0C | R/W (#06) | Ịdị mma nke okpomọkụ egosiri | 1, 5 | N-> temp=N/10 Celsius | 1 |
| 285 | 0x011D | R/W (#06) | Ndozi okpomọkụ gosipụtara | -3.0… 3.0°C | n'ime usoro 0.5 | 0 |
| 288 | 0x0120 | R/W (#06) | Nhọrọ nke ụdị usoro - kpo oku / oyi (dabere na ntọala ntinye S1) | 0,1 | 0 = ikpo ọkụ
1 = Ịjụ oyi |
0 |
| 291 | 0x0123 | R/W (#06) | Ọsọ fan kacha nta (Primeters-P10) | 0-100 | N-> ọsọ = N % | 10 |
| 292 | 0x0124 | R/W (#06) | Ọsọ fan kacha (Prameters-P11) | 0-100 | N-> ọsọ = N % | 90 |
| 293 | 0x0125 | R/W (#06) | Ọsọ nke fan gia 1st n'ụdị ntuziaka (paramita ihe ntinye-P12) | 0-100 | N-> ọsọ = N % | 30 |
| 294 | 0x0126 | R/W (#06) | Ọsọ nke fan gia 2 n'ụdị akwụkwọ ntuziaka (P13) | 0-100 | N-> ọsọ = N % | 60 |
| 295 | 0x0127 | R/W (#06) | Ọsọ nke fan gia 3 n'ụdị ntuziaka (P14) | 0-100 | N-> ọsọ = N % | 90 |
FAQ
- Q: Kedu ihe ntọala nkwurịta okwu ndabara maka njikwa EFAN-24?
- A: Ntọala ndabara na-agụnye adreesị ngwaọrụ ohu nke 1, ọnụego baud nke 9600, enweghị mkpọ, yana otu nkwụsịtụ.
- Q: Kedu otu m ga-esi nweta ndekọ data dị iche iche na netwọk MODBUS RTU?
- A: Jiri koodu ọrụ kwesịrị ekwesị dị ka #03 maka ịgụ akwụkwọ njide ma ọ bụ #06 maka ide otu ndebanye aha. Ndebanye aha ọ bụla nwere ụkpụrụ data akọwapụtara na paramita njikwa.
Akwụkwọ / akụrụngwa
 |
ENGO na-achịkwa EFAN-24 PWM Onye njikwa ọsọ ọsọ [pdf] Akwụkwọ ntuziaka EFAN-230B EFAN-230W |