Elitech RCW-260 Okpomọkụ Data Logger

Nkọwapụta

• Ụdị: RCW-260
• Ọrụ: Okpomọkụ, ọkụ, nlekota mkpọtụ, 4G
  netwọk
• Sensors: High-precision sensor with high measurement accuracy
  izi ezi
• Ụdị nyocha:
  • RCW-260 T: Wuru na-ekpo ọkụ
  • RCW-260 TH: T&H arụnyere n'ime ya
  • RCW-260 TE: Mpụga + okpomọkụ dị n'ime
  • RCW-260 THE: Mpụga T & H + esịtidem okpomọkụ
  • RCW-260 TLE: Mpụga ultra ala T + dị n'ime okpomọkụ
• Ogologo nha: 0% RH ~ 100% RH

Ntuziaka nchekwa

Iji hụ na ịwụnye na iji ngwaahịa a nke ọma, biko gụọ nke ọma ma rube isi na ntuziaka ndị a:

Batrị

• Biko jiri batrị mbụ karịa nke ọ bụla ọzọ, ka ịzenarị mmebi ma ọ bụ mperi ngwaọrụ.
• Do not disassemble battery without permission. No squeezing, hitting, heating or burning the battery, otherwise battery may explode and lead to a fire.

Nnyenye ike mpụga

• When need external power supply, please use the provided power adapter. Any other power adapter which does not meet the technical specifications is not allowed. Otherwise, due to which, the device mav be damaged, or even cause a fire.
• If the device will not be in use for a long period of time, external power supply should be cut-off to avo device burned-off and fire, meanwhile a discharge-charge maintenance should be performed to maintain the activity of lithium cell.

Ngwaọrụ

• Amachibidoro iji ngwaọrụ a na gburugburu nwere gas na-ere ọkụ ma ọ bụ ihe mgbawa, ma ọ bụghị ya, enwere ike ịkpata mgbawa/ọkụ.
• Once a peculiar smell emits from the device when in use, please cut off power supply immediately and contact manufacturer or supplier.

Mkpachapụ anya

• Ọ bụrụ na ngwaọrụ agaghị arụ ọrụ ruo ogologo oge, a ga-ewepụ ngwaọrụ ahụ ma chekwaa ya na igbe ngwugwu na ebe akọrọ na oyi.
• A naghị anabata mgbanwe ọ bụla na-enweghị ikike na ngwaọrụ site na onye ọrụ, nke nwere ike imetụta izi ezi, ma ọ bụ ọbụna mebie ngwaọrụ ahụ.
• Do not use the device outdoors, to avoid short circuit, burn, and other malfunctions caused bv bad weather such as raining and thunder-lightings.
• Ozugbo onye na-edebanye data na-anọghị n'ahịrị (enweghị nbudata data) ruo ogologo oge, biko lelee ọkwa netwọk ya.
• Jiri ihe ndekọ data n'ime oke nha ya.
• Do not impact the data logger with force. Measurement values of the data logger may be affected by the following factors:
• Mgbanwe okpomọkụ:
  • Idozi oge dị mkpụmkpụ maka idobe ngwaọrụ na gburugburu nha.
  • Na nso ma ọ bụ ọbụna kpughee isi iyi ọkụ/oyi.
• Ngbanwe iru mmiri:
  • Idozi oge dị mkpụmkpụ maka idobe ngwaọrụ na gburugburu nha.
  • Ekpughere ogologo oge na uzuoku, uzuoku, nsụda mmiri ma ọ bụ gburugburu ikuku.
• Mmetọ:
  Ekpughere ya na uzuzu ma ọ bụ ebe ndị ọzọ emetọọ.

Ngosipụta ngwaahịa

Ngwaahịa a na-ejikọta okpomọkụ, ọkụ, nlekota nke ọma na ọrụ netwọk 4G. Ngwaahịa ahụ na-anabata ihe mmetụta dị elu nke nwere nha nha dị elu, nke enwere ike itinye ya na nchịkọta na nlekota nke data okpomọkụ na iru mmiri na gburugburu dị mgbagwoju anya. Mmekọrịta na ngwaọrụ site na igwe ojii ma ọ bụ APP ka ịtọọ paramita, view na mbupụ data.

① Backmounted hanging hole	② Liquid crystal display	③ LED pilot lamp
④ Start-stop button	⑤ Serial number	⑥ Light sensor
⑦ Power supply + data interface	⑧ Built-in sensor
⑨ Activation / Flight mode button	⑩ External sensor

• Ụdị arụ ọrụ
• Nkwupụta ọrụ
• Ụdị ụgbọ elu
• Ọnọdụ mgbaàmà
• Ike batrị
• Ìhè na ịma jijiji akara
• Oge na ọnụ ọgụgụ nke ndetu ndekọ
• Okpomọkụ na iru mmiri uru

Mara: To ensure the reliability of the data, when the battery power is less than 10% to 20%, please do not open the record (20%)

Selection table(standard light and vibration sensors)

Nlereanya	RCW-260 T	RCW-260TH	RCW-260 TE	RCW-260 THE	RCW-260 TLE
Nyochaa Ụdị	Okpomọkụ arụnyere n'ime ya	T&H arụnyere n'ime ya	Mpụga + okpomọkụ dị n'ime	Okpomọkụ dị n'ime T&H+ nke mpụga	Mpụga ultra ala T + okpomọkụ dị n'ime
Atụ Oke	-30°C ~ 60°C	-30°C ~ 60°C 0%RH~100%RH	Mpụga:-40°C ~ 85°C arụnyere: -30°C ~ 60°C	External:-40°C ~ 85°C Built-in: -30°C ~ 60°C 0%RH~100%RH	Mpụga:-200°C ~ 150°C arụnyere: -30°C ~ 60°C
Izi ezi	±0.5C	±0.5°C ±5%RH	±0.5C	±0.5°C ±5%RH	±0.5°C (-40°C ~ 85°C) ±1°C (100°C ~ 150°C) ± 2°C (ọzọ)

Mara: The built-in probe should not be used when charging, so as not to cause abnormal temperature; Do not charge in the environment below 0°C;

Nka nka

Ujo oke	0g ~ 16g
Ìhè ike oke	0 ~ 52000 Lux
Mkpebi oke	0.1°C/0.1%RH/0.1g/1Lux
Bọtịnụ	Imebe bọtịnụ ugboro abụọ
Edu ìhè	Ọkụ na-egosi ọkụ na-acha uhie uhie na akwụkwọ ndụ akwụkwọ ndụ, uhie na acha anụnụ anụnụ
Ngosipụta ihuenyo	Ngosipụta koodu agbajiri
Ebe ọnọdụ	LBS + GPS (optional)
Ebe nchekwa isi	10W
Onyunyo data	Dị ugbu a +Mgbe agwụchara
Ndekọ oghere	1 nkeji ~ 24h; ndabara: 5min
Bulite etiti oge	5 nkeji ~ 24h; ndabara: 60min
Usoro mbulite data	4G
Ụdị of ibido ibu ibu	Pịa bọtịnụ, ikpo okwu na oge
Ibu ibu Kwụsị ọnọdụ	Bọtịnụ, ikpo okwu, ma mejupụta
Tinyegharịa mmalite	3 ugboro (ọ bụghị na shelf ndụ)
Ụgbọ elu ọnọdụ	Bọtịnụ igodo, oge, ngere elektrọn
Oti mkpu ọnọdụ	Oke oke, ike dị ala
Batrị ụdị	3.7 V polymer lithium batrị 3000mAh
OTA kwalite	Nkwalite dị site na ngwanrọ njikwa data yana ikpo okwu
Nhazi of waterproof	IP65 (arụnyere n'ime ya)
Ọrụ gburugburu ebe obibi	-30°C ~ 70°C, 0% RH ~ 100% RH (enweghị condensation)
Nchekwa gburugburu ebe obibi	15 ~ 30C, 20 ~ 75% RH
Nkọwapụta na nha	103 x 61.3 x 30 (mm)

1. Tinye akụrụngwa
   Banye na website of the platform: http://new.i-elitech.com, or scan the code to download and install the APP Follow the prompts to register, log in and add devices.
2. Nkwalite
   • Long press the button for 5 seconds, and the screen appears normally, indicating that the device is activated.
   • Mara: Click the button screen to display normally, indicating that the device is activated;
3. Ụdị ụgbọ elu
   • Mepee: long press the button for 5 seconds, the screen display logo indicates that the flight mode is successfully started;
   • Mechie: long press the button for 5 seconds, the screen sign indicates that the flight mode is closed;
   • Mara: For other flight modes, please operate through the platform or APP.
4. Start the record
   Press the button for 5 seconds and the screen sign indicates the startup record; if the sign is flashing, the delay countdown state is entered. After the delay, the record starts automatically;
5. Kwụsị ịdekọ
   Long press the button for 5 seconds, the screen display ■ sign instructions to stop recording successfully;
6. Mbupu data
   Ejikọ ngwaọrụ a na kọmpụta USB interface site na eriri data, ma na-ebute akụkọ data na-akpaghị aka na usoro PDF + CSV. Ị nwere ike idetuo akụkọ emepụtara na kọmputa gị maka ịchekwa.

Ihe ngosi ọkụ ọkụ nwere ntuziaka

LCD nkwuputa doro anya

Aha Ụlọ Ọrụ: Elitech Technology Inc. Address: 2528 Qurne or, Ste 2 San Jose, CA 95131 USATel: 408-898-2866 (ụlọ ọrụ)
Ndị ọchịchị Websaịtị: www.elitechlog.com
Email: coolchain@e-elitech.com

Nbanye Platform websaịtị: https://new.i-elitech.com

FAQS

Kedu ka m ga-esi gbanye ngwaọrụ ahụ?
To activate the device, long press the button for 5 seconds until the screen appears normally, indicating activation.

Enwere m ike iji ihe nkwụnye ọkụ dị iche?
No, only use the provided power adapter to avoid damaging the device or causing a fire.

Akwụkwọ / akụrụngwa

Elitech RCW-260 Okpomọkụ Data Logger [pdf] Akwụkwọ ntuziaka RCW-260 T, RCW-260TH, RCW-260 TE, RCW-260 THE, RCW-260 TLE, RCW-260 Data Logger okpomọkụ, RCW-260, Okpomọkụ Data Logger, Data Logger

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ