Electrobes ESP32-S3 Development Board
Nkọwapụta
- Aha ngwaahịa: ESP32 Development Board
- Onye nrụpụta: Ụlọ ọrụ Espressif Systems
- ndakọrịta: Arduino IDE
- Ikuku Njikọ: WiFi
Ntuziaka
Download software and development board
- Anyị na-eji modul na Arduino IDE (nke enwere ike ibudata site na onye ọrụ gọọmentị website) https://www.arduino.cc/en/Main/Software. Using the development environment as an example to illustrate the usage of modules.
- Mepee ngwa ngwa Arduino IDE
. The following interface appears。
Add ESP32 development environment
- ESP32 development environment add path
- In Arduino IDE, open File ->Preferences (shortcut key ‘Ctrl+,’).
- Support https://dl.espressif.com/dl/package_esp32_index.json Put the JSON address of this development board into the attachment
- N'ime websaịtị nke onye njikwa ụlọ ọrụ mmepe. Pịa 'OK' (ụdị ọhụrụ ahụ bụ 'OK'). Pịa 'OK' ọzọ (ụdị ọhụrụ ahụ bụ' OK') ịlaghachi na ibe IDE Arduino.
- Pịa na Development Board Manager, windo Development Board Manager ga-egosi, chọọ ESP32, ma wụnye gburugburu mmepe
- Enwere ike iji ndị arụnyere arụnyere ozugbo. Mgbe echichi ewepụsịrị, enwere ike ịhụ na bọọdụ mmepe na agbakwunyela ọtụtụ nkwado maka modul ESP32.
Select the corresponding port and development board model
- Manually enter download mode: Method 1: Press and hold BOOT to power on. Method 2: Hold down the BOOT button on ESP32C3, then press the RESET button, release the RESET button, and then release the BOOT button. At this point, ESP32C3 will enter download mode.
- Pịa bulite ma chere ka nbudata ahụ mezue. Ọkụ RGB dị na modul ahụ ga-enwu nke ọma na njikọ WiFi ga-eguzobe.
Ajụjụ
How do I know if the ESP32 module is successfully programmed?
Upon successful programming, the RGB lights on the module will flash normally, and a WiFi connection will be established.
Can I use other development environments with the ESP32 board?
The ESP32 board is specifically designed for use with Arduino IDE for optimal performance and compatibility.
Akwụkwọ / akụrụngwa
 |
Electrobes ESP32-S3 Development Board [pdf] Akwụkwọ ntuziaka onye ọrụ ESP32-S3, ESP32-C3, ESP32-H2, ESP32-C6, ESP32-S3 Development Board, ESP32-S3, Development Board, Board. |