EDA Technology ED-MONITOR-070C Industrial Automation and Controls
Akwụkwọ ntuziaka ngwaike
Isiakwụkwọ a na-ewebata ngwaahịa ahụview, packaging list, appearance, buttons, indicators, and interfaces.
gafereview
The ED-MONITOR-070C is a 7-inch industrial touch monitor featuring a screen resolution of 1024×600, a high brightness of 425 cd/m², and a multi-touch capacitive touch screen. It includes one standard HDMI interface, one Type-C USB port, one DC Jack power interface, and one 3.5mm audio jack, making it compatible with various general-purpose PC hosts. The backlight can be adjusted via buttons, and it is primarily used in industrial control applications.
- Ihe interface HDMI na-enye ohere njikọ kpọmkwem na mmepụta HDMI nke onye ọbịa PC.
- Ọdụ ụgbọ USB Type-C na-ebunye akara ngosi mmetụ aka.
- Jack audio 3.5mm na-akwado njikọta ekweisi.
- The DC Jack interface interface na-akwado ntinye 12V ~ 24V DC.
Ndepụta nkwakọ ihe
1 x ED-MONITOR-070C Nyochaa
Appearancel
Akụkụ a na-ewebata ọrụ na nkọwa nke interfaces na panel nke ọ bụla.
Ogwe ihu
Ewebata ụdị na nkọwa nke interfaces na ihu panel. 
| Mba. | Nkọwa |
| 1 | 1 × LCD ihuenyo, 7-inch ihuenyo mmetụ na a mkpebi nke 1024 × 600, multi-aka capacitive ihuenyo mmetụ. |
Ogwe azụ
Ewebata ụdị na nkọwa nke interfaces na azụ panel.
| Mba. | Nkọwa |
| 1 | 4 x oghere ntinye nke snap, nke a na-eji edozi snaps na ngwaọrụ maka nrụnye. |
| 2 | 4 x VESA oghere na-arị elu, nke edobere maka ntinye bracket VESA. |
Akụkụ akụkụ
Ewebata ụdị na nkọwa nke interfaces na akụkụ panel.
| Mba. | Nkọwa |
| 1 | 1 × 3.5mm stereo audio output jack, supports headphone connectivity. |
| 2 | 1 × red power indicator, using to view ọnọdụ ike ọkụ na ike gbanyụọ ngwaọrụ ahụ. |
| 3 | 1 × DC input, DC Jack connector, which supports 12V~24V DC input. |
| 4 | 1 × HDMI input, Type-A connector, which connects to the HDMI output of a PC host. |
| Mba. | Nkọwa |
|
5 |
1 × USB touch screen port, Type-C USB connector, which connects to the USB port of a PC host to transmit touch screen signals. |
|
6 |
1 × Rubber plug (pre-drilled 7mm diameter circular cable routing hole), designed to accommodate additional cable management needs. |
| 7 | 1 × “Brightness –” button, press the button to decrease the backlight brightness of the LCD screen. |
| 8 | 1 × “Brightness +” button, press the button to increase the backlight brightness of the LCD screen. |
Bọtịnụ
The ED-MONITOR-070C device includes two backlight brightness adjustment buttons. The buttons are black in color and marked with screen-printed labels 
na ụlọ.
| Bọtịnụ | Nkọwa |
 |
Pịa bọtịnụ ka iwelie ọkụ azụ nke ihuenyo LCD. |
 |
Pịa bọtịnụ ka ibelata nchapụta ọkụ azụ nke ihuenyo LCD. |
Ihe ngosi
The ED-MONITOR-070C device includes a red power indicator, marked with the screen-printed label “PWR” on the housing.
| Ihe ngosi | Ọnọdụ | Nkọwa |
| PWR | On | Agbanyela ngwaọrụ a. |
| kpuo ìsì | Ọkụ ọkụ nke ngwaọrụ adịghị mma. Biko kwụsị ọkụ ọkụ ozugbo. | |
| Gbanyụọ | Agbanyeghi ngwaọrụ a. |
Interface
Iwebata nkọwa na ọrụ nke interface ọ bụla na ED-MONITOR-070C.
Ike Okwu
Ngwa ED-MONITOR-070C gụnyere ọdụ ụgbọ mmiri ntinye ike 1 nwere njikọ DC Jack, nke akpọrọ "24V DC" na ụlọ. Ọ na-akwado ntinye 12V ~ 24V DC.
NDỤMỌDỤ
A na-atụ aro nkwụnye ọkụ 12V 2A.
- Ntugharị HDMI
The ED-MONITOR-070C device includes 1 HDMI input interface with a Type-A connector, labeled “HDMI INPUT” on the housing, used to connect to the HDMI output of a PC host. - Ụdị-C USB Interface
The ED-MONITOR-070C device includes 1 Type-C USB interface, labeled “USB TOUCH” on the housing. This interface connects to the USB port of a PC host to transmit touch screen signals. - Interface ọdịyo
The ED-MONITOR-070C device includes 1 audio interface (3.5mm 4-pole headphone jack), labeled “AUDIO” on the housing, supporting stereo audio output.
Ịwụnye ngwaọrụ
The ED-MONITOR-070C device supports front embedded installation. The standard packaging does not include the embedded installation Mounting kit (ED-ACCHMI-Front). Please purchase the ED-ACCHMI-Front kit in advance.
Nkwadebe:
E nwetala ngwa ED-ACCHMI-Front Mounting (gụnyere skru 4 × M4*10, skru 4 × M4*16, na 4 snaps).
A kwadobela screwdriver cross.
Nzọụkwụ:
- Kpebie akụkụ mbelata na kabinet dabere na nha ED-MONITOR-070C, dị ka egosiri na foto dị n'okpuru.
- Gwuo oghere na kabinet dị ka oghere a kọwara na Nzọụkwụ 1 si dị.
- Tinye ED-MONITOR-070C n'ime kabinet si n'akụkụ mpụta.
- Kwado oghere ndị ahụ skru (na-enweghị eriri) nke snaps na oghere na-arịgo snap n'akụkụ ngwaọrụ.
- Chekwaa snaps na ngwaọrụ ahụ.
Jiri 4 × M4*10 screws kechie snaps na ngwaọrụ ahụ site na ịtinye ha site na oghere ndị na-enweghị eriri ma mechie ha n'akụkụ elekere.
Mgbe ahụ, jiri 4 × M4 * 16 screws iji chekwaa snaps na kabinet: Fanye ha site na oghere eri nke snaps ahụ, pịa n'akụkụ ime nke ụlọ ahụ, ma tinye ha n'akụkụ elekere ruo mgbe agbasiri ike.
Iji ngwaọrụ
The ED-MONITOR-070C requires a PC host for operation and does not require driver installation. Connect it to the HDMI output of a PC host first, then power on the device to enable normal display. It supports backlight adjustment via dedicated buttons and software.
Njikọ eriri
Akụkụ a na-akọwa otu esi ejikọta eriri.
Nkwadebe:
- Enwetala ihe nkwụnye ọkụ na-arụ ọrụ.
- Enwetala onye nnabata PC na-arụ ọrụ.
- Enwetarala HDMI na-arụ ọrụ na eriri USB (Ụdị-A ruo Ụdị-C USB).
Eserese atụmatụ nke eriri njikọ:
Biko rụtụ aka na interface 1.6 iji nweta nkọwa ntụtụ na ụzọ wiwi nke interface ọ bụla.
NDỤMỌDỤ
HDMI INPUT interface nke ED-MONITOR-070C dakọtara na ndị ọbịa PC dị iche iche. Ọgụgụ dị n'okpuru na-egosi njikọ eriri site na iji Raspberry Pi dị ka example. 
Ịba ngwaọrụ ahụ
ED-MONITOR-070C anaghị agụnye mgba ọkụ anụ ahụ. Mgbe jikọọ na isi iyi ọkụ, ngwaọrụ ga-agbanye ọkụ na-akpaghị aka. Ozugbo ebubachara nke ọma, ọ ga-egosipụta desktọpụ nke onye nnabata PC ejikọrọ.
Na-edozi ọkụ azụ azụ
ED-MONITOR-070C supports brightness adjustment via physical buttons and software.Button-Based Brightness Adjustment
Once the ED-MONITOR-070C is connected to a PC and displays normally, its backlight brightness can be adjusted using the two dedicated brightness adjustment buttons on the side panel.
| Bọtịnụ | Nkọwa |
|
Pịa bọtịnụ ka iwelie ọkụ azụ nke ihuenyo LCD. |
|
Pịa bọtịnụ ka ibelata nchapụta ọkụ azụ nke ihuenyo LCD. |
Software-Based Brightness Adjustment
After connecting the ED-MONITOR-070C to a PC host and ensuring normal display operation, the screen backlight can be adjusted via software. Note that the operation methods differ between the Desktop and Lite versions of the operating system.
Raspberry Pi OS (Desktọpụ)
Adjusting backlight brightness via UI on Raspberry Pi OS (Desktop).
Nkwadebe:
ED-MONITOR-070C is properly connected to the Raspberry Pi host with normal display output. • The Raspberry Pi host has stable network connectivity.
Nzọụkwụ:
- Tinye ebe nchekwa EDATEC dabara nke ọma site na ime iwu ndị a n'usoro n'usoro n'ọnụ ọnụ.
Wụnye ngwa ngwa ngwa. 
- Pịa
akara ngosi dị n'akụkụ akuku desktọpụ dị n'elu aka ekpe. Wee họrọ ka "Ngwaọrụ Sistemụ" → "EDATEC Monitor". 
- Adjust brightness using the slider in the “EDATEC Backlight” panel.
NDỤMỌDỤ
Kwado imezu iwu sudo ed-ddc-ui na windo ọnụ iji mepee panel "EDATEC Backlight".
Raspberry Pi OS (Lite)
Adjusting backlight brightness via CLI on Raspberry Pi OS (Lite).
Nkwadebe:
- Ejikọtara ED-MONITOR-070C nke ọma na onye nnabata Raspberry Pi nwere mmepụta ngosi nkịtị.
- Onye nnabata Raspberry Pi nwere njikọ netwọkụ kwụsiri ike.
Nzọụkwụ:
- Tinye ebe nchekwa EDATEC dabara nke ọma site na ime iwu ndị a n'usoro n'usoro n'ọnụ ọnụ.
- Install the software toolkit
- Jụọ ọkwa nchapụta ugbu a:
- Tọọ ọkwa nchapụta:
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
Ekwentị: +86-15921483028(China) | +86-18217351262(Office)
Akwụkwọ / akụrụngwa
 |
EDA Technology ED-MONITOR-070C Industrial Automation and Controls [pdf] Akwụkwọ ntuziaka onye ọrụ ED-MONITOR-070C Industrial Automation and Controls, ED-MONITOR-070C, Industrial Automation and Controls, Automation and Controls, and Controls, Controls |